! Started logfile: /vlbi/bp222/temp_maps//J1645-3318_X_dfm.log on Thu Feb 14 23:03:45 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1645-3318_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1645-3318_X_uvm.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! AN table 2: 69 integrations on 21 of 21 possible baselines. ! AN table 3: 46 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.713318 visibilities/baseline/integration-bin. ! Found source: J1645-3318 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 54312 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1645-3318_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 126 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 126 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 126 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 126 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 126 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 126 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 126 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 126 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 126 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 126 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 126 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.007415Jy sigma=12.613613 ! Fit after self-cal, rms=0.920152Jy sigma=11.458067 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6364 mas, bmaj=1.844 mas, bpa=-2.367 degrees ! Estimated noise=0.565011 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0637143 Jy ! Component: 100 - total flux cleaned = 0.0786123 Jy ! Total flux subtracted in 100 components = 0.0786123 Jy ! Clean residual min=-0.003568 max=0.006006 Jy/beam ! Clean residual mean=-0.000011 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.0786123 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0786123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081972Jy sigma=0.865826 ! Fit after self-cal, rms=0.081504Jy sigma=0.862019 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00591479 Jy ! Component: 100 - total flux cleaned = 0.00907138 Jy ! Total flux subtracted in 100 components = 0.00907138 Jy ! Clean residual min=-0.002949 max=0.004848 Jy/beam ! Clean residual mean=-0.000007 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0876837 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.0876837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081028Jy sigma=0.849670 ! Fit after self-cal, rms=0.081017Jy sigma=0.849612 ! Inverting map ! Added new window around map position (-0.6, -2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003987 Jy ! Component: 100 - total flux cleaned = 0.00480156 Jy ! Total flux subtracted in 100 components = 0.00480156 Jy ! Clean residual min=-0.002624 max=0.003871 Jy/beam ! Clean residual mean=-0.000005 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.0924853 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 0.0924852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080869Jy sigma=0.845844 ! Fit after self-cal, rms=0.080853Jy sigma=0.845473 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8948 mas, bmaj=2.588 mas, bpa=-5.446 degrees ! Estimated noise=0.25556 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387226 Jy ! Component: 100 - total flux cleaned = 0.00583773 Jy ! Component: 150 - total flux cleaned = 0.00630294 Jy ! Component: 200 - total flux cleaned = 0.00663672 Jy ! Total flux subtracted in 200 components = 0.00663672 Jy ! Clean residual min=-0.001738 max=0.002612 Jy/beam ! Clean residual mean=-0.000005 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.099122 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 39 components and 0.099122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080660Jy sigma=0.842753 ! Fit after self-cal, rms=0.080658Jy sigma=0.842332 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8948 x 2.588 at -5.446 degrees (North through East) ! Clean map min=-0.00162 max=0.082422 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.96 HN 1.06 KP 1.07 ! LA 1.02 MK 1.07 NL 1.19 OV 0.92 ! PT 0.97 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.98 HN 1.23 KP 1.04 ! MK 1.03 NL 0.88 OV 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 HN 1.28 KP 0.96 LA 0.96 ! MK 1.00 NL 1.12 OV 0.97 PT 0.99 ! SC 1.14 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 1.06 KP 1.07 ! LA 1.00 MK 1.00 NL 1.16 OV 0.91 ! PT 0.95 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 0.96 HN 1.24 KP 1.06 ! MK 0.97 NL 0.82 OV 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 HN 1.47 KP 0.92 LA 0.99 ! MK 1.01 NL 1.12 OV 0.98 PT 1.06 ! SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.99 HN 1.17 KP 1.03 ! LA 1.01 MK 1.01 NL 1.11 OV 0.93 ! PT 0.96 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 HN 1.08 KP 1.00 ! MK 0.87 NL 0.81 OV 1.09 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 HN 1.31 KP 0.95 LA 1.02 ! MK 1.00 NL 1.12 OV 0.95 PT 1.05 ! SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 0.94 KP 1.09 ! LA 0.98 MK 1.04 NL 1.15 OV 0.91 ! PT 0.97 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.02 HN 1.26 KP 0.99 ! MK 0.98 NL 0.80 OV 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 HN 1.59 KP 0.95 LA 1.01 ! MK 0.95 NL 1.14 OV 1.00 PT 1.03 ! SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.94 HN 1.03 KP 1.04 ! LA 1.05 MK 1.09 NL 1.14 OV 0.91 ! PT 0.94 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 0.93 HN 1.15 KP 1.00 ! MK 1.00 NL 0.92 OV 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 HN 1.44 KP 0.91 LA 0.95 ! MK 0.94 NL 1.23 OV 0.98 PT 1.10 ! SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.97 HN 1.15 KP 1.03 ! LA 1.07 MK 1.08 NL 1.14 OV 0.92 ! PT 0.91 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.00 HN 1.13 KP 1.04 ! MK 0.98 NL 0.87 OV 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 HN 1.42 KP 0.94 LA 1.01 ! MK 0.97 NL 1.21 OV 1.02 PT 0.97 ! SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.03 HN 0.95 KP 1.02 ! LA 1.00 MK 1.02 NL 1.13 OV 0.93 ! PT 0.98 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.16 FD 1.05 HN 1.16 KP 0.95 ! MK 0.99 NL 0.90 OV 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 1.50 KP 0.91 LA 0.97 ! MK 1.00 NL 1.18 OV 0.96 PT 1.13 ! SC 1.10 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.98 HN 1.06 KP 1.07 ! LA 1.00 MK 1.10 NL 1.13 OV 0.87 ! PT 0.93 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.98 HN 1.16 KP 1.03 ! MK 1.02 NL 0.87 OV 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 HN 1.37 KP 0.94 LA 1.06 ! MK 1.01 NL 1.11 OV 0.94 PT 0.99 ! SC 1.11 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.96 HN 1.04 KP 1.01 ! LA 1.05 MK 1.02 NL 1.07 OV 0.90 ! PT 0.93 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.08 HN 1.20 KP 1.04 ! MK 0.95 NL 0.81 OV 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 HN 1.17 KP 0.96 LA 0.97 ! MK 0.95 NL 1.20 OV 0.95 PT 0.99 ! SC 1.07 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.94 HN 1.03 KP 1.06 ! LA 1.00 MK 0.95 NL 1.15 OV 0.89 ! PT 0.93 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.95 HN 1.09 KP 1.00 ! MK 0.98 NL 0.87 OV 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 HN 1.36 KP 0.94 LA 1.01 ! MK 1.06 NL 1.11 OV 0.99 PT 1.08 ! SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.94 HN 1.00 KP 0.98 ! LA 0.98 MK 1.01 NL 1.14 OV 0.91 ! PT 0.95 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.98 HN 1.16 KP 0.98 ! MK 0.98 NL 0.83 OV 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 HN 1.58 KP 0.97 LA 1.00 ! MK 1.02 NL 1.16 OV 0.89 PT 0.97 ! SC 1.11 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 1.01 KP 1.01 ! LA 1.00 MK 0.91 NL 1.10 OV 0.90 ! PT 0.99 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 0.94 HN 1.06 KP 1.03 ! MK 0.95 NL 0.83 OV 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 HN 1.09 KP 0.95 LA 0.97 ! MK 0.96 NL 1.04 OV 1.02 PT 0.98 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.080658Jy sigma=0.842332 ! Fit after self-cal, rms=0.086639Jy sigma=0.835153 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9008 mas, bmaj=2.606 mas, bpa=-5.447 degrees ! Estimated noise=0.257156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000495564 Jy ! Component: 100 - total flux cleaned = -0.000611356 Jy ! Component: 150 - total flux cleaned = -0.000692329 Jy ! Component: 200 - total flux cleaned = -0.000748092 Jy ! Total flux subtracted in 200 components = -0.000748092 Jy ! Clean residual min=-0.001113 max=0.001089 Jy/beam ! Clean residual mean=-0.000001 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.0983739 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 55 components and 0.0983739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086621Jy sigma=0.835025 ! Fit after self-cal, rms=0.086796Jy sigma=0.834583 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086796Jy sigma=0.834583 ! Fit after self-cal, rms=0.087395Jy sigma=0.834393 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9019 mas, bmaj=2.609 mas, bpa=-5.418 degrees ! Estimated noise=0.257023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000388477 Jy ! Component: 100 - total flux cleaned = -0.000441309 Jy ! Component: 150 - total flux cleaned = -0.000506054 Jy ! Component: 200 - total flux cleaned = -0.000566412 Jy ! Total flux subtracted in 200 components = -0.000566412 Jy ! Clean residual min=-0.001068 max=0.001039 Jy/beam ! Clean residual mean=-0.000001 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.0978075 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 0.0978075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087384Jy sigma=0.834321 ! Fit after self-cal, rms=0.087402Jy sigma=0.834307 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.50449e-05 Jy ! Component: 100 - total flux cleaned = -9.24144e-05 Jy ! Component: 150 - total flux cleaned = -0.000132639 Jy ! Component: 200 - total flux cleaned = -0.000170372 Jy ! Total flux subtracted in 200 components = -0.000170372 Jy ! Clean residual min=-0.001059 max=0.001038 Jy/beam ! Clean residual mean=-0.000001 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.0976371 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 65 components and 0.0976371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087396Jy sigma=0.834268 ! Fit after self-cal, rms=0.087396Jy sigma=0.834263 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087396Jy sigma=0.834263 ! Fit after self-cal, rms=0.088066Jy sigma=0.832006 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9032 mas, bmaj=2.614 mas, bpa=-5.425 degrees ! Estimated noise=0.257025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169587 Jy ! Component: 100 - total flux cleaned = -0.000226619 Jy ! Component: 150 - total flux cleaned = -0.000238617 Jy ! Component: 200 - total flux cleaned = -0.000238454 Jy ! Total flux subtracted in 200 components = -0.000238454 Jy ! Clean residual min=-0.000874 max=0.000879 Jy/beam ! Clean residual mean=-0.000002 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.0973986 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 0.0973986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088059Jy sigma=0.831970 ! Fit after self-cal, rms=0.088106Jy sigma=0.831858 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.39475e-05 Jy ! Component: 100 - total flux cleaned = 1.45825e-05 Jy ! Component: 150 - total flux cleaned = 1.49206e-05 Jy ! Component: 200 - total flux cleaned = 1.47478e-05 Jy ! Total flux subtracted in 200 components = 1.47478e-05 Jy ! Clean residual min=-0.000867 max=0.000875 Jy/beam ! Clean residual mean=-0.000002 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.0974134 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 0.0974134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088101Jy sigma=0.831842 ! Fit after self-cal, rms=0.088104Jy sigma=0.831840 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088104Jy sigma=0.831840 ! Fit after self-cal, rms=0.088225Jy sigma=0.831817 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.218 mas, bmaj=6.896 mas, bpa=-6.806 degrees ! Estimated noise=0.295313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154816 Jy ! Component: 100 - total flux cleaned = -0.000169125 Jy ! Component: 150 - total flux cleaned = -0.000169307 Jy ! Component: 200 - total flux cleaned = -0.000169542 Jy ! Total flux subtracted in 200 components = -0.000169542 Jy ! Clean residual min=-0.000833 max=0.001007 Jy/beam ! Clean residual mean=-0.000002 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.0972439 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 90 components and 0.0972439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088222Jy sigma=0.831807 ! Fit after self-cal, rms=0.088228Jy sigma=0.831803 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.32977e-05 Jy ! Component: 100 - total flux cleaned = -2.69787e-05 Jy ! Component: 150 - total flux cleaned = -2.7131e-05 Jy ! Component: 200 - total flux cleaned = -2.71748e-05 Jy ! Total flux subtracted in 200 components = -2.71748e-05 Jy ! Clean residual min=-0.000827 max=0.001018 Jy/beam ! Clean residual mean=-0.000002 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.0972167 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 92 components and 0.0972167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088226Jy sigma=0.831807 ! Fit after self-cal, rms=0.088225Jy sigma=0.831805 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.904 mas, bmaj=2.617 mas, bpa=-5.434 degrees ! Estimated noise=0.256899 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.904 x 2.617 at -5.434 degrees (North through East) ! Clean map min=-0.0015523 max=0.082685 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6408 mas, bmaj=1.859 mas, bpa=-2.28 degrees ! Estimated noise=0.572148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0645173 Jy ! Component: 100 - total flux cleaned = 0.0795693 Jy ! Component: 150 - total flux cleaned = 0.0855308 Jy ! Component: 200 - total flux cleaned = 0.0891586 Jy ! Total flux subtracted in 200 components = 0.0891586 Jy ! Clean residual min=-0.002252 max=0.002574 Jy/beam ! Clean residual mean=-0.000004 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0891585 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0891585 Jy ! Inverting map and beam ! Estimated beam: bmin=0.904 mas, bmaj=2.617 mas, bpa=-5.434 degrees ! Estimated noise=0.256899 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377194 Jy ! Component: 100 - total flux cleaned = 0.00580218 Jy ! Component: 150 - total flux cleaned = 0.00667774 Jy ! Component: 200 - total flux cleaned = 0.00701348 Jy ! Total flux subtracted in 200 components = 0.00701348 Jy ! Clean residual min=-0.000933 max=0.000972 Jy/beam ! Clean residual mean=-0.000002 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.096172 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 41 components and 0.096172 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.218 mas, bmaj=6.896 mas, bpa=-6.806 degrees ! Estimated noise=0.295313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000958496 Jy ! Component: 100 - total flux cleaned = 0.00109662 Jy ! Component: 150 - total flux cleaned = 0.0011259 Jy ! Component: 200 - total flux cleaned = 0.00115115 Jy ! Total flux subtracted in 200 components = 0.00115115 Jy ! Clean residual min=-0.000797 max=0.001039 Jy/beam ! Clean residual mean=-0.000003 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.0973232 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.06302e-05 Jy ! Component: 100 - total flux cleaned = 1.0669e-05 Jy ! Component: 150 - total flux cleaned = 2.65609e-06 Jy ! Component: 200 - total flux cleaned = 2.81851e-06 Jy ! Total flux subtracted in 200 components = 2.81851e-06 Jy ! Clean residual min=-0.000796 max=0.001040 Jy/beam ! Clean residual mean=-0.000002 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.097326 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 58 components and 0.097326 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.904 mas, bmaj=2.617 mas, bpa=-5.434 degrees ! Estimated noise=0.256899 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.89754e-05 Jy ! Component: 100 - total flux cleaned = 7.75779e-07 Jy ! Component: 150 - total flux cleaned = -6.84924e-05 Jy ! Component: 200 - total flux cleaned = -0.000106271 Jy ! Total flux subtracted in 200 components = -0.000106271 Jy ! Clean residual min=-0.000898 max=0.000888 Jy/beam ! Clean residual mean=-0.000001 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.0972197 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.0972197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088227Jy sigma=0.831882 ! Fit after self-cal, rms=0.088223Jy sigma=0.831858 wmodel J1645-3318_X_map.mod ! Writing 73 model components to file: J1645-3318_X_map.mod wobs J1645-3318_X_uvs.fits ! Writing UV FITS file: J1645-3318_X_uvs.fits wwins J1645-3318_X_map.win ! wwins: Wrote 3 windows to J1645-3318_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131733 Jy ! Component: 100 - total flux cleaned = 0.000319505 Jy ! Component: 150 - total flux cleaned = 0.000469666 Jy ! Component: 200 - total flux cleaned = 0.000556919 Jy ! Component: 250 - total flux cleaned = 0.000670193 Jy ! Component: 300 - total flux cleaned = 0.000766962 Jy ! Component: 350 - total flux cleaned = 0.000875167 Jy ! Component: 400 - total flux cleaned = 0.000954674 Jy ! Component: 450 - total flux cleaned = 0.0009937 Jy ! Component: 500 - total flux cleaned = 0.00103216 Jy ! Component: 550 - total flux cleaned = 0.00101957 Jy ! Component: 600 - total flux cleaned = 0.00104467 Jy ! Component: 650 - total flux cleaned = 0.0010573 Jy ! Component: 700 - total flux cleaned = 0.0010454 Jy ! Component: 750 - total flux cleaned = 0.00109331 Jy ! Component: 800 - total flux cleaned = 0.00111694 Jy ! Component: 850 - total flux cleaned = 0.00115189 Jy ! Component: 900 - total flux cleaned = 0.00119786 Jy ! Component: 950 - total flux cleaned = 0.00122057 Jy ! Component: 1000 - total flux cleaned = 0.00124314 Jy ! Component: 1050 - total flux cleaned = 0.0012767 Jy ! Component: 1100 - total flux cleaned = 0.00132082 Jy ! Component: 1150 - total flux cleaned = 0.00135357 Jy ! Component: 1200 - total flux cleaned = 0.00137526 Jy ! Component: 1250 - total flux cleaned = 0.00141809 Jy ! Component: 1300 - total flux cleaned = 0.00144998 Jy ! Component: 1350 - total flux cleaned = 0.00148177 Jy ! Component: 1400 - total flux cleaned = 0.00151304 Jy ! Component: 1450 - total flux cleaned = 0.00152349 Jy ! Component: 1500 - total flux cleaned = 0.00160591 Jy ! Component: 1550 - total flux cleaned = 0.00160575 Jy ! Component: 1600 - total flux cleaned = 0.00165633 Jy ! Component: 1650 - total flux cleaned = 0.00168632 Jy ! Component: 1700 - total flux cleaned = 0.00171612 Jy ! Component: 1750 - total flux cleaned = 0.0017063 Jy ! Component: 1800 - total flux cleaned = 0.00174558 Jy ! Component: 1850 - total flux cleaned = 0.00176499 Jy ! Component: 1900 - total flux cleaned = 0.00177474 Jy ! Component: 1950 - total flux cleaned = 0.0018132 Jy ! Component: 2000 - total flux cleaned = 0.00183226 Jy ! Component: 2050 - total flux cleaned = 0.00185118 Jy ! Component: 2100 - total flux cleaned = 0.00186058 Jy ! Component: 2150 - total flux cleaned = 0.00190716 Jy ! Component: 2200 - total flux cleaned = 0.00189789 Jy ! Component: 2250 - total flux cleaned = 0.00194389 Jy ! Component: 2300 - total flux cleaned = 0.00196217 Jy ! Component: 2350 - total flux cleaned = 0.00194398 Jy ! Component: 2400 - total flux cleaned = 0.00196198 Jy ! Component: 2450 - total flux cleaned = 0.00196201 Jy ! Component: 2500 - total flux cleaned = 0.0019888 Jy ! Component: 2550 - total flux cleaned = 0.00196216 Jy ! Component: 2600 - total flux cleaned = 0.00200628 Jy ! Component: 2650 - total flux cleaned = 0.00195358 Jy ! Component: 2700 - total flux cleaned = 0.001971 Jy ! Component: 2750 - total flux cleaned = 0.00198835 Jy ! Component: 2800 - total flux cleaned = 0.00197113 Jy ! Component: 2850 - total flux cleaned = 0.00197973 Jy ! Component: 2900 - total flux cleaned = 0.00202249 Jy ! Component: 2950 - total flux cleaned = 0.00196291 Jy ! Component: 3000 - total flux cleaned = 0.00200525 Jy ! Component: 3050 - total flux cleaned = 0.0020221 Jy ! Component: 3100 - total flux cleaned = 0.00196345 Jy ! Component: 3150 - total flux cleaned = 0.00197177 Jy ! Component: 3200 - total flux cleaned = 0.00195517 Jy ! Component: 3250 - total flux cleaned = 0.00194684 Jy ! Component: 3300 - total flux cleaned = 0.00192218 Jy ! Component: 3350 - total flux cleaned = 0.00190578 Jy ! Component: 3400 - total flux cleaned = 0.00193022 Jy ! Component: 3450 - total flux cleaned = 0.00188154 Jy ! Component: 3500 - total flux cleaned = 0.00194619 Jy ! Component: 3550 - total flux cleaned = 0.00188177 Jy ! Component: 3600 - total flux cleaned = 0.00190586 Jy ! Component: 3650 - total flux cleaned = 0.00188994 Jy ! Component: 3700 - total flux cleaned = 0.00188995 Jy ! Component: 3750 - total flux cleaned = 0.00192946 Jy ! Component: 3800 - total flux cleaned = 0.00193732 Jy ! Component: 3850 - total flux cleaned = 0.00192945 Jy ! Component: 3900 - total flux cleaned = 0.00192946 Jy ! Component: 3950 - total flux cleaned = 0.00189828 Jy ! Component: 4000 - total flux cleaned = 0.00193713 Jy ! Component: 4050 - total flux cleaned = 0.00192939 Jy ! Total flux subtracted in 4096 components = 0.00191402 Jy ! Clean residual min=-0.000451 max=0.000556 Jy/beam ! Clean residual mean=-0.000001 rms=0.000137 Jy/beam ! Combined flux in latest and established models = 0.0991337 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 374 components and 0.0991337 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1645-3318_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.904 x 2.617 at -5.434 degrees (North through East) ! Clean map min=-0.0014063 max=0.082764 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1645-3318_X_map.fits wmodel /vlbi/bp222/temp_maps//J1645-3318_X_map.mod ! Writing 374 model components to file: /vlbi/bp222/temp_maps//J1645-3318_X_map.mod wobs /vlbi/bp222/temp_maps//J1645-3318_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1645-3318_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1645-3318_X_map.win ! wwins: Wrote 4 windows to /vlbi/bp222/temp_maps//J1645-3318_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0827637 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000136609 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.495177 0.495177 0.990353 1.98071 3.96141 7.92282 15.8456 31.6913 63.3826 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.082 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 605.844 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1645-3318_X_dfm.log closed on Thu Feb 14 23:03:52 2019