! Started logfile: J1645-3318_S_dfm.log on Fri Feb 15 19:56:28 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J1645-3318_S_uvm.fits
! Reading UV FITS file: J1645-3318_S_uvm.fits
! AN table 1: 72 integrations on 21 of 21 possible baselines.
! AN table 2: 69 integrations on 21 of 21 possible baselines.
! AN table 3: 46 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.720405 visibilities/baseline/integration-bin.
! Found source: J1645-3318
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 12244 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1645-3318_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
!  A total of 94 telescope corrections were flagged in sub-array 2.
!  A total of 59 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
!  A total of 94 telescope corrections were flagged in sub-array 2.
!  A total of 59 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
!  A total of 94 telescope corrections were flagged in sub-array 2.
!  A total of 59 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 504 telescope corrections were flagged in sub-array 1.
!  A total of 483 telescope corrections were flagged in sub-array 2.
!  A total of 368 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.005788Jy  sigma=10.747637
! Fit after  self-cal, rms=0.924132Jy  sigma=9.797253
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.744 mas, bmaj=7.811 mas, bpa=-6.95 degrees
! Estimated noise=1.42461 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0549362 Jy
! Component: 100  -  total flux cleaned = 0.0727827 Jy
! Total flux subtracted in 100 components = 0.0727827 Jy
! Clean residual min=-0.005917 max=0.008663 Jy/beam
! Clean residual mean=-0.000052 rms=0.001501 Jy/beam
! Combined flux in latest and established models = 0.0727826 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.0727826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.087777Jy  sigma=0.853587
! Fit after  self-cal, rms=0.087143Jy  sigma=0.847533
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110531 Jy
! Component: 100  -  total flux cleaned = 0.0176508 Jy
! Total flux subtracted in 100 components = 0.0176508 Jy
! Clean residual min=-0.004479 max=0.004610 Jy/beam
! Clean residual mean=-0.000024 rms=0.001159 Jy/beam
! Combined flux in latest and established models = 0.0904334 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 52 components and 0.0904334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.085183Jy  sigma=0.816043
! Fit after  self-cal, rms=0.085188Jy  sigma=0.815564
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.974 mas, bmaj=12 mas, bpa=-8.709 degrees
! Estimated noise=0.719211 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, 1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00777054 Jy
! Component: 100  -  total flux cleaned = 0.011935 Jy
! Component: 150  -  total flux cleaned = 0.0143008 Jy
! Component: 200  -  total flux cleaned = 0.0154073 Jy
! Total flux subtracted in 200 components = 0.0154073 Jy
! Clean residual min=-0.002324 max=0.003044 Jy/beam
! Clean residual mean=-0.000015 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.105841 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 108 components and 0.105841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.084604Jy  sigma=0.806245
! Fit after  self-cal, rms=0.084600Jy  sigma=0.805931
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.974 x 12 at -8.709 degrees (North through East)
! Clean map  min=-0.0022466  max=0.074618 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        1.08     LA        0.96     NL        1.14     
!   OV        1.12     PT        1.06     SC        1.16     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        0.96     HN        1.10     KP        0.93     
!   MK        1.04     NL        0.93     OV        0.87     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.03     KP        0.95     LA        0.98     MK        1.03     
!   NL        1.17     OV        0.98     PT        0.89     SC        1.13     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     KP        0.97     LA        0.93     NL        1.12     
!   OV        1.06     PT        1.00     SC        0.92     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.28     FD        0.91     HN        1.09     KP        0.98     
!   MK        1.05     NL        1.04     OV        0.91     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.42     KP        0.92     LA        1.00     MK        1.01     
!   NL        1.00     OV        0.96     PT        1.02     SC        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     KP        0.99     LA        0.85     NL        1.07     
!   OV        1.12     PT        1.02     SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        0.91     HN        1.08     KP        1.02     
!   MK        1.01     NL        0.86     OV        0.94     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.09     KP        0.87     LA        1.01     MK        1.02     
!   NL        1.16     OV        0.98     PT        0.97     SC        1.09     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.084600Jy  sigma=0.805931
! Fit after  self-cal, rms=0.088546Jy  sigma=0.797657
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.021 mas, bmaj=12.14 mas, bpa=-8.972 degrees
! Estimated noise=0.723863 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000553881 Jy
! Component: 100  -  total flux cleaned = -0.000414866 Jy
! Component: 150  -  total flux cleaned = -0.000414999 Jy
! Component: 200  -  total flux cleaned = -0.000441365 Jy
! Total flux subtracted in 200 components = -0.000441365 Jy
! Clean residual min=-0.002322 max=0.002290 Jy/beam
! Clean residual mean=-0.000011 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.105399 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 123 components and 0.105399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.088519Jy  sigma=0.797374
! Fit after  self-cal, rms=0.088716Jy  sigma=0.796943
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.088716Jy  sigma=0.796943
! Fit after  self-cal, rms=0.089613Jy  sigma=0.796680
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.025 mas, bmaj=12.16 mas, bpa=-8.931 degrees
! Estimated noise=0.725947 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000248596 Jy
! Component: 100  -  total flux cleaned = -0.000247264 Jy
! Component: 150  -  total flux cleaned = -0.000222884 Jy
! Component: 200  -  total flux cleaned = -0.000222753 Jy
! Total flux subtracted in 200 components = -0.000222753 Jy
! Clean residual min=-0.002317 max=0.002212 Jy/beam
! Clean residual mean=-0.000011 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.105177 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 129 components and 0.105177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.089595Jy  sigma=0.796522
! Fit after  self-cal, rms=0.089612Jy  sigma=0.796483
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000147965 Jy
! Component: 100  -  total flux cleaned = -0.000150041 Jy
! Component: 150  -  total flux cleaned = -0.000172891 Jy
! Component: 200  -  total flux cleaned = -0.000192744 Jy
! Total flux subtracted in 200 components = -0.000192744 Jy
! Clean residual min=-0.002295 max=0.002221 Jy/beam
! Clean residual mean=-0.000012 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.104984 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 137 components and 0.104984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.089598Jy  sigma=0.796371
! Fit after  self-cal, rms=0.089594Jy  sigma=0.796354
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.089594Jy  sigma=0.796354
! Fit after  self-cal, rms=0.090319Jy  sigma=0.794105
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.017 mas, bmaj=12.21 mas, bpa=-8.862 degrees
! Estimated noise=0.726364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.55186e-06 Jy
! Component: 100  -  total flux cleaned = -5.66176e-05 Jy
! Component: 150  -  total flux cleaned = -5.62507e-05 Jy
! Component: 200  -  total flux cleaned = -5.68315e-05 Jy
! Total flux subtracted in 200 components = -5.68315e-05 Jy
! Clean residual min=-0.002270 max=0.002067 Jy/beam
! Clean residual mean=-0.000008 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.104927 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 148 components and 0.104927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.090305Jy  sigma=0.794011
! Fit after  self-cal, rms=0.090357Jy  sigma=0.793828
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000127832 Jy
! Component: 100  -  total flux cleaned = -0.000127448 Jy
! Component: 150  -  total flux cleaned = -0.000148178 Jy
! Component: 200  -  total flux cleaned = -0.000128852 Jy
! Total flux subtracted in 200 components = -0.000128852 Jy
! Clean residual min=-0.002314 max=0.002092 Jy/beam
! Clean residual mean=-0.000009 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.104798 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 152 components and 0.104798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.090346Jy  sigma=0.793752
! Fit after  self-cal, rms=0.090346Jy  sigma=0.793742
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.090346Jy  sigma=0.793742
! Fit after  self-cal, rms=0.090509Jy  sigma=0.793704
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.407 mas, bmaj=31.23 mas, bpa=-9.732 degrees
! Estimated noise=0.793478 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108896 Jy
! Component: 100  -  total flux cleaned = -6.385e-05 Jy
! Component: 150  -  total flux cleaned = -4.59169e-05 Jy
! Component: 200  -  total flux cleaned = -3.87088e-05 Jy
! Total flux subtracted in 200 components = -3.87088e-05 Jy
! Clean residual min=-0.001506 max=0.001543 Jy/beam
! Clean residual mean=-0.000014 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.10476 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 160 components and 0.10476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.090514Jy  sigma=0.793694
! Fit after  self-cal, rms=0.090517Jy  sigma=0.793678
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000109775 Jy
! Component: 100  -  total flux cleaned = -0.000116762 Jy
! Component: 150  -  total flux cleaned = -0.000116783 Jy
! Component: 200  -  total flux cleaned = -0.000122764 Jy
! Total flux subtracted in 200 components = -0.000122764 Jy
! Clean residual min=-0.001507 max=0.001585 Jy/beam
! Clean residual mean=-0.000015 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.104637 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 165 components and 0.104637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.090519Jy  sigma=0.793671
! Fit after  self-cal, rms=0.090517Jy  sigma=0.793666
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.01 mas, bmaj=12.26 mas, bpa=-8.912 degrees
! Estimated noise=0.726136 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.01 x 12.26 at -8.912 degrees (North through East)
! Clean map  min=-0.0029879  max=0.074971 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.757 mas, bmaj=7.897 mas, bpa=-6.916 degrees
! Estimated noise=1.45704 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0549556 Jy
! Component: 100  -  total flux cleaned = 0.0743236 Jy
! Component: 150  -  total flux cleaned = 0.0854459 Jy
! Component: 200  -  total flux cleaned = 0.0926531 Jy
! Total flux subtracted in 200 components = 0.0926531 Jy
! Clean residual min=-0.005019 max=0.004698 Jy/beam
! Clean residual mean=-0.000022 rms=0.001186 Jy/beam
! Combined flux in latest and established models = 0.0926531 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 59 model components to the UV plane model.
! The established model now contains 59 components and 0.0926531 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.01 mas, bmaj=12.26 mas, bpa=-8.912 degrees
! Estimated noise=0.726136 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00714651 Jy
! Component: 100  -  total flux cleaned = 0.00964966 Jy
! Component: 150  -  total flux cleaned = 0.010456 Jy
! Component: 200  -  total flux cleaned = 0.0108968 Jy
! Total flux subtracted in 200 components = 0.0108968 Jy
! Clean residual min=-0.002384 max=0.002810 Jy/beam
! Clean residual mean=-0.000011 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.10355 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 103 components and 0.10355 Jy
! Inverting map 
! Added new window around map position (10, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00174431 Jy
! Component: 100  -  total flux cleaned = 0.00204749 Jy
! Component: 150  -  total flux cleaned = 0.00209087 Jy
! Component: 200  -  total flux cleaned = 0.0020508 Jy
! Total flux subtracted in 200 components = 0.0020508 Jy
! Clean residual min=-0.001974 max=0.001782 Jy/beam
! Clean residual mean=-0.000005 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.105601 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 123 components and 0.105601 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.407 mas, bmaj=31.23 mas, bpa=-9.732 degrees
! Estimated noise=0.793478 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000252568 Jy
! Component: 100  -  total flux cleaned = -0.000324271 Jy
! Component: 150  -  total flux cleaned = -0.000359399 Jy
! Component: 200  -  total flux cleaned = -0.000390214 Jy
! Total flux subtracted in 200 components = -0.000390214 Jy
! Clean residual min=-0.001445 max=0.001478 Jy/beam
! Clean residual mean=-0.000011 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.10521 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.84597e-05 Jy
! Component: 100  -  total flux cleaned = -4.22736e-05 Jy
! Component: 150  -  total flux cleaned = -5.55769e-05 Jy
! Component: 200  -  total flux cleaned = -8.08933e-05 Jy
! Total flux subtracted in 200 components = -8.08933e-05 Jy
! Clean residual min=-0.001447 max=0.001476 Jy/beam
! Clean residual mean=-0.000012 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.10513 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 153 components and 0.10513 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.01 mas, bmaj=12.26 mas, bpa=-8.912 degrees
! Estimated noise=0.726136 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000153499 Jy
! Component: 100  -  total flux cleaned = -0.000154271 Jy
! Component: 150  -  total flux cleaned = -0.000153233 Jy
! Component: 200  -  total flux cleaned = -0.000153389 Jy
! Total flux subtracted in 200 components = -0.000153389 Jy
! Clean residual min=-0.001955 max=0.001772 Jy/beam
! Clean residual mean=-0.000007 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.104976 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 169 components and 0.104976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.090451Jy  sigma=0.793295
! Fit after  self-cal, rms=0.090434Jy  sigma=0.793122
wmodel J1645-3318_S_map.mod
! Writing 169 model components to file: J1645-3318_S_map.mod
wobs   J1645-3318_S_uvs.fits
! Writing UV FITS file: J1645-3318_S_uvs.fits
wwins  J1645-3318_S_map.win
! wwins: Wrote 3 windows to J1645-3318_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00027219 Jy
! Component: 100  -  total flux cleaned = -0.000400707 Jy
! Component: 150  -  total flux cleaned = -0.000584215 Jy
! Component: 200  -  total flux cleaned = -0.000701741 Jy
! Component: 250  -  total flux cleaned = -0.000873344 Jy
! Component: 300  -  total flux cleaned = -0.00109609 Jy
! Component: 350  -  total flux cleaned = -0.00128558 Jy
! Component: 400  -  total flux cleaned = -0.00139107 Jy
! Component: 450  -  total flux cleaned = -0.00152074 Jy
! Component: 500  -  total flux cleaned = -0.00162253 Jy
! Component: 550  -  total flux cleaned = -0.00174719 Jy
! Component: 600  -  total flux cleaned = -0.00189388 Jy
! Component: 650  -  total flux cleaned = -0.00203827 Jy
! Component: 700  -  total flux cleaned = -0.0022031 Jy
! Component: 750  -  total flux cleaned = -0.00234216 Jy
! Component: 800  -  total flux cleaned = -0.00245622 Jy
! Component: 850  -  total flux cleaned = -0.00265854 Jy
! Component: 900  -  total flux cleaned = -0.00276897 Jy
! Component: 950  -  total flux cleaned = -0.00292149 Jy
! Component: 1000  -  total flux cleaned = -0.00294306 Jy
! Component: 1050  -  total flux cleaned = -0.00300677 Jy
! Component: 1100  -  total flux cleaned = -0.00306934 Jy
! Component: 1150  -  total flux cleaned = -0.00311062 Jy
! Component: 1200  -  total flux cleaned = -0.00321175 Jy
! Component: 1250  -  total flux cleaned = -0.00319128 Jy
! Component: 1300  -  total flux cleaned = -0.00321112 Jy
! Component: 1350  -  total flux cleaned = -0.00325028 Jy
! Component: 1400  -  total flux cleaned = -0.00328871 Jy
! Component: 1450  -  total flux cleaned = -0.00325063 Jy
! Component: 1500  -  total flux cleaned = -0.00332626 Jy
! Component: 1550  -  total flux cleaned = -0.00330742 Jy
! Component: 1600  -  total flux cleaned = -0.00334431 Jy
! Component: 1650  -  total flux cleaned = -0.0033259 Jy
! Component: 1700  -  total flux cleaned = -0.00330773 Jy
! Component: 1750  -  total flux cleaned = -0.00328941 Jy
! Component: 1800  -  total flux cleaned = -0.0032894 Jy
! Component: 1850  -  total flux cleaned = -0.00321852 Jy
! Component: 1900  -  total flux cleaned = -0.00323618 Jy
! Component: 1950  -  total flux cleaned = -0.00321877 Jy
! Component: 2000  -  total flux cleaned = -0.00320155 Jy
! Component: 2050  -  total flux cleaned = -0.00313342 Jy
! Component: 2100  -  total flux cleaned = -0.00316729 Jy
! Component: 2150  -  total flux cleaned = -0.0031504 Jy
! Component: 2200  -  total flux cleaned = -0.00318351 Jy
! Component: 2250  -  total flux cleaned = -0.00315046 Jy
! Component: 2300  -  total flux cleaned = -0.00313392 Jy
! Component: 2350  -  total flux cleaned = -0.00310141 Jy
! Component: 2400  -  total flux cleaned = -0.00310146 Jy
! Component: 2450  -  total flux cleaned = -0.00314922 Jy
! Component: 2500  -  total flux cleaned = -0.0031176 Jy
! Component: 2550  -  total flux cleaned = -0.00313341 Jy
! Component: 2600  -  total flux cleaned = -0.00310213 Jy
! Component: 2650  -  total flux cleaned = -0.00313314 Jy
! Component: 2700  -  total flux cleaned = -0.00313303 Jy
! Component: 2750  -  total flux cleaned = -0.00313313 Jy
! Component: 2800  -  total flux cleaned = -0.00316343 Jy
! Component: 2850  -  total flux cleaned = -0.00316335 Jy
! Component: 2900  -  total flux cleaned = -0.00314843 Jy
! Component: 2950  -  total flux cleaned = -0.00319296 Jy
! Component: 3000  -  total flux cleaned = -0.00317814 Jy
! Component: 3050  -  total flux cleaned = -0.0031488 Jy
! Component: 3100  -  total flux cleaned = -0.00317789 Jy
! Component: 3150  -  total flux cleaned = -0.00317782 Jy
! Component: 3200  -  total flux cleaned = -0.00319212 Jy
! Component: 3250  -  total flux cleaned = -0.00316342 Jy
! Component: 3300  -  total flux cleaned = -0.00317772 Jy
! Component: 3350  -  total flux cleaned = -0.00317778 Jy
! Component: 3400  -  total flux cleaned = -0.00323392 Jy
! Component: 3450  -  total flux cleaned = -0.00319217 Jy
! Component: 3500  -  total flux cleaned = -0.00323379 Jy
! Component: 3550  -  total flux cleaned = -0.003275 Jy
! Component: 3600  -  total flux cleaned = -0.00323395 Jy
! Component: 3650  -  total flux cleaned = -0.00327475 Jy
! Component: 3700  -  total flux cleaned = -0.00330162 Jy
! Component: 3750  -  total flux cleaned = -0.00327479 Jy
! Component: 3800  -  total flux cleaned = -0.00334182 Jy
! Component: 3850  -  total flux cleaned = -0.00336842 Jy
! Component: 3900  -  total flux cleaned = -0.00340813 Jy
! Component: 3950  -  total flux cleaned = -0.00342127 Jy
! Component: 4000  -  total flux cleaned = -0.00343442 Jy
! Component: 4050  -  total flux cleaned = -0.00347344 Jy
! Total flux subtracted in 4096 components = -0.00351232 Jy
! Clean residual min=-0.000718 max=0.000878 Jy/beam
! Clean residual mean=-0.000005 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.101464 Jy
keep
! Adding 230 model components to the UV plane model.
! The established model now contains 399 components and 0.101464 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J1645-3318_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.01 x 12.26 at -8.912 degrees (North through East)
! Clean map  min=-0.0021922  max=0.075417 Jy/beam
! Writing clean map to FITS file: J1645-3318_S_map.fits
wmodel J1645-3318_S_map.mod
! Writing 399 model components to file: J1645-3318_S_map.mod
wobs   J1645-3318_S_uvs.fits
! Writing UV FITS file: J1645-3318_S_uvs.fits
wwins  J1645-3318_S_map.win
! wwins: Wrote 4 windows to J1645-3318_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0754169 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000238285 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.947872 0.947872 1.89574 3.79149 7.58297 15.1659 30.3319 60.6638
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.075 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  316.498 
quit
! Quitting program
! Log file J1645-3318_S_dfm.log closed on Fri Feb 15 19:56:32 2019