! Started logfile: /vlbi/bp222/temp_maps//J1643+0732_X_dfm.log on Thu Feb 14 23:03:30 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1643+0732_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1643+0732_X_uvm.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! AN table 2: 23 integrations on 21 of 21 possible baselines. ! AN table 3: 68 integrations on 36 of 36 possible baselines. ! AN table 4: 23 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.962154 visibilities/baseline/integration-bin. ! Found source: J1643+0732 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 51252 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1643+0732_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.007352Jy sigma=13.936078 ! Fit after self-cal, rms=0.896821Jy sigma=12.360485 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6441 mas, bmaj=1.672 mas, bpa=-3.137 degrees ! Estimated noise=0.49363 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0802265 Jy ! Component: 100 - total flux cleaned = 0.105151 Jy ! Total flux subtracted in 100 components = 0.105151 Jy ! Clean residual min=-0.004641 max=0.013388 Jy/beam ! Clean residual mean=-0.000002 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.105151 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.105151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066259Jy sigma=0.810674 ! Fit after self-cal, rms=0.066024Jy sigma=0.808004 ! Inverting map ! Added new window around map position (1, 2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141992 Jy ! Component: 100 - total flux cleaned = 0.0226032 Jy ! Total flux subtracted in 100 components = 0.0226032 Jy ! Clean residual min=-0.002970 max=0.005037 Jy/beam ! Clean residual mean=-0.000002 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.127754 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.127754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062734Jy sigma=0.753792 ! Fit after self-cal, rms=0.062576Jy sigma=0.751763 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00619383 Jy ! Component: 100 - total flux cleaned = 0.010112 Jy ! Total flux subtracted in 100 components = 0.010112 Jy ! Clean residual min=-0.002225 max=0.002921 Jy/beam ! Clean residual mean=-0.000001 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.137866 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.137866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061885Jy sigma=0.740953 ! Fit after self-cal, rms=0.061845Jy sigma=0.740391 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8149 mas, bmaj=1.998 mas, bpa=-4.785 degrees ! Estimated noise=0.239112 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349265 Jy ! Component: 100 - total flux cleaned = 0.00462862 Jy ! Component: 150 - total flux cleaned = 0.00510015 Jy ! Component: 200 - total flux cleaned = 0.00541833 Jy ! Total flux subtracted in 200 components = 0.00541833 Jy ! Clean residual min=-0.001659 max=0.002288 Jy/beam ! Clean residual mean=-0.000002 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.143285 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.143285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061634Jy sigma=0.737611 ! Fit after self-cal, rms=0.061610Jy sigma=0.737292 ! Inverting map ! Added new window around map position (5, 7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196178 Jy ! Component: 100 - total flux cleaned = 0.00287847 Jy ! Component: 150 - total flux cleaned = 0.00343081 Jy ! Component: 200 - total flux cleaned = 0.003813 Jy ! Total flux subtracted in 200 components = 0.003813 Jy ! Clean residual min=-0.001639 max=0.001616 Jy/beam ! Clean residual mean=-0.000001 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.147098 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 43 components and 0.147098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061542Jy sigma=0.736169 ! Fit after self-cal, rms=0.061533Jy sigma=0.736050 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8149 x 1.998 at -4.785 degrees (North through East) ! Clean map min=-0.0014838 max=0.10356 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.97 HN 0.91 KP 1.06 ! LA 1.04 MK 1.00 NL 1.21 PT 0.95 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.03 HN 1.07 KP 0.93 ! MK 0.96 NL 0.88 OV 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 HN 1.07 KP 0.98 LA 0.98 ! MK 0.97 NL 0.94 OV 0.98 PT 1.01 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 FD 0.97 HN 1.02 KP 1.15 ! MK 1.02 NL 0.95 OV 1.03 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.93 KP 1.09 ! LA 1.01 MK 1.04 NL 1.18 PT 0.97 ! SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.07 HN 1.02 KP 0.94 ! MK 1.04 NL 0.89 OV 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 1.09 KP 0.96 LA 1.00 ! MK 0.96 NL 0.94 OV 0.99 PT 1.00 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.96 HN 1.02 KP 1.18 ! MK 0.96 NL 0.99 OV 0.97 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.94 HN 0.89 KP 1.07 ! LA 1.01 MK 1.05 NL 1.26 PT 0.97 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.96 HN 0.98 KP 1.04 ! MK 1.03 NL 0.84 OV 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 1.11 KP 0.97 LA 1.01 ! MK 0.98 NL 0.96 OV 0.99 PT 1.02 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 1.00 HN 1.03 KP 1.22 ! MK 1.06 NL 0.98 OV 0.93 SC 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.86 KP 1.04 ! LA 1.00 MK 1.02 NL 1.19 PT 0.96 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 HN 1.10 KP 1.01 ! MK 1.03 NL 0.85 OV 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 HN 1.10 KP 0.97 LA 0.99 ! MK 0.97 NL 0.97 OV 0.97 PT 0.98 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 0.98 HN 1.00 KP 1.14 ! MK 1.04 NL 1.00 OV 0.98 SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 0.89 KP 1.07 ! LA 1.04 MK 1.02 NL 1.19 PT 0.95 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.05 HN 1.11 KP 0.98 ! MK 0.99 NL 0.90 OV 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 HN 1.05 KP 0.97 LA 1.00 ! MK 0.97 NL 0.95 OV 0.98 PT 0.99 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 1.02 HN 1.04 KP 1.19 ! MK 1.05 NL 0.98 OV 1.03 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.96 HN 0.91 KP 1.07 ! LA 1.01 MK 1.07 NL 1.21 PT 0.94 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.96 HN 1.07 KP 1.02 ! MK 1.00 NL 0.88 OV 1.07 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 HN 1.04 KP 0.96 LA 0.99 ! MK 0.99 NL 0.96 OV 0.98 PT 0.99 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 1.01 HN 1.12 KP 1.21 ! MK 1.02 NL 0.95 OV 0.97 SC 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 0.90 KP 1.07 ! LA 1.04 MK 1.04 NL 1.19 PT 0.95 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.94 HN 1.07 KP 0.98 ! MK 1.02 NL 0.84 OV 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 1.03 KP 0.98 LA 1.01 ! MK 0.96 NL 0.92 OV 0.98 PT 1.02 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.96 HN 0.99 KP 1.27 ! MK 0.95 NL 0.99 OV 1.03 SC 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 0.91 KP 1.07 ! LA 1.03 MK 1.03 NL 1.20 PT 0.90 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.96 HN 1.01 KP 0.98 ! MK 1.02 NL 0.89 OV 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 1.07 KP 0.97 LA 1.02 ! MK 0.98 NL 0.94 OV 0.97 PT 1.01 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 1.00 HN 1.10 KP 1.20 ! MK 1.00 NL 1.05 OV 0.97 SC 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 0.90 KP 1.03 ! LA 1.03 MK 1.05 NL 1.24 PT 0.98 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.03 HN 1.09 KP 0.97 ! MK 0.98 NL 0.91 OV 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 1.06 KP 0.97 LA 1.02 ! MK 0.98 NL 0.95 OV 0.99 PT 0.99 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 1.04 HN 1.02 KP 1.17 ! MK 0.95 NL 0.98 OV 0.98 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.90 KP 1.07 ! LA 1.03 MK 1.08 NL 1.22 PT 0.95 ! SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.93 HN 1.07 KP 1.02 ! MK 0.95 NL 0.81 OV 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 1.05 KP 0.94 LA 1.00 ! MK 1.01 NL 0.96 OV 0.98 PT 0.99 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 0.93 HN 0.98 KP 1.22 ! MK 0.97 NL 0.97 OV 1.01 SC 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 0.88 KP 1.09 ! LA 1.00 MK 1.00 NL 1.25 PT 0.94 ! SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.96 HN 1.06 KP 0.99 ! MK 1.00 NL 0.95 OV 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 1.02 KP 0.94 LA 0.98 ! MK 0.98 NL 0.94 OV 1.03 PT 0.99 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 FD 1.05 HN 0.98 KP 1.17 ! MK 0.95 NL 1.01 OV 0.97 SC 0.90 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 0.90 KP 1.05 ! LA 1.00 MK 0.92 NL 1.26 PT 0.97 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.96 HN 1.04 KP 0.93 ! MK 1.09 NL 0.94 OV 1.06 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 HN 0.97 KP 0.99 LA 1.00 ! MK 1.00 NL 0.99 OV 0.96 PT 0.98 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 FD 0.96 HN 1.07 KP 1.15 ! MK 0.96 NL 0.92 OV 0.96 SC 1.05 ! ! ! Fit before self-cal, rms=0.061533Jy sigma=0.736050 ! Fit after self-cal, rms=0.061361Jy sigma=0.725312 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8133 mas, bmaj=1.996 mas, bpa=-4.735 degrees ! Estimated noise=0.238255 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000487765 Jy ! Component: 100 - total flux cleaned = 0.00069389 Jy ! Component: 150 - total flux cleaned = 0.00076925 Jy ! Component: 200 - total flux cleaned = 0.000852147 Jy ! Total flux subtracted in 200 components = 0.000852147 Jy ! Clean residual min=-0.000920 max=0.001023 Jy/beam ! Clean residual mean=-0.000000 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.14795 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.14795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061346Jy sigma=0.725101 ! Fit after self-cal, rms=0.061363Jy sigma=0.724917 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061363Jy sigma=0.724917 ! Fit after self-cal, rms=0.061447Jy sigma=0.724572 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8134 mas, bmaj=1.996 mas, bpa=-4.758 degrees ! Estimated noise=0.238308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106309 Jy ! Component: 100 - total flux cleaned = 0.000184625 Jy ! Component: 150 - total flux cleaned = 0.000253803 Jy ! Component: 200 - total flux cleaned = 0.000328149 Jy ! Total flux subtracted in 200 components = 0.000328149 Jy ! Clean residual min=-0.000913 max=0.001000 Jy/beam ! Clean residual mean=-0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.148278 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.148278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061439Jy sigma=0.724477 ! Fit after self-cal, rms=0.061440Jy sigma=0.724465 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.4, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000850341 Jy ! Component: 100 - total flux cleaned = 0.00109652 Jy ! Component: 150 - total flux cleaned = 0.00121022 Jy ! Component: 200 - total flux cleaned = 0.0013092 Jy ! Total flux subtracted in 200 components = 0.0013092 Jy ! Clean residual min=-0.000900 max=0.000791 Jy/beam ! Clean residual mean=-0.000000 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.149587 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 75 components and 0.149587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061425Jy sigma=0.724276 ! Fit after self-cal, rms=0.061426Jy sigma=0.724262 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061426Jy sigma=0.724262 ! Fit after self-cal, rms=0.061702Jy sigma=0.723321 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8135 mas, bmaj=1.996 mas, bpa=-4.777 degrees ! Estimated noise=0.238271 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.81417e-05 Jy ! Component: 100 - total flux cleaned = 0.000173779 Jy ! Component: 150 - total flux cleaned = 0.000237322 Jy ! Component: 200 - total flux cleaned = 0.000266124 Jy ! Total flux subtracted in 200 components = 0.000266124 Jy ! Clean residual min=-0.000874 max=0.000731 Jy/beam ! Clean residual mean=-0.000000 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.149853 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 81 components and 0.149853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061698Jy sigma=0.723269 ! Fit after self-cal, rms=0.061703Jy sigma=0.723254 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.60285e-05 Jy ! Component: 100 - total flux cleaned = 8.19261e-05 Jy ! Component: 150 - total flux cleaned = 9.03908e-05 Jy ! Component: 200 - total flux cleaned = 9.85815e-05 Jy ! Total flux subtracted in 200 components = 9.85815e-05 Jy ! Clean residual min=-0.000868 max=0.000729 Jy/beam ! Clean residual mean=-0.000000 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.149952 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 89 components and 0.149952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061700Jy sigma=0.723227 ! Fit after self-cal, rms=0.061700Jy sigma=0.723224 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061700Jy sigma=0.723224 ! Fit after self-cal, rms=0.061744Jy sigma=0.723222 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.02 mas, bmaj=3.018 mas, bpa=-5.465 degrees ! Estimated noise=0.298402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000424617 Jy ! Component: 100 - total flux cleaned = 0.000636455 Jy ! Component: 150 - total flux cleaned = 0.00076495 Jy ! Component: 200 - total flux cleaned = 0.000846775 Jy ! Total flux subtracted in 200 components = 0.000846775 Jy ! Clean residual min=-0.001132 max=0.001043 Jy/beam ! Clean residual mean=-0.000000 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.150799 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 97 components and 0.150799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061745Jy sigma=0.723220 ! Fit after self-cal, rms=0.061744Jy sigma=0.723210 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126394 Jy ! Component: 100 - total flux cleaned = 0.000191576 Jy ! Component: 150 - total flux cleaned = 0.000249755 Jy ! Component: 200 - total flux cleaned = 0.000283143 Jy ! Total flux subtracted in 200 components = 0.000283143 Jy ! Clean residual min=-0.001131 max=0.001024 Jy/beam ! Clean residual mean=-0.000000 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.151082 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 106 components and 0.151082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061745Jy sigma=0.723221 ! Fit after self-cal, rms=0.061745Jy sigma=0.723221 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8135 mas, bmaj=1.997 mas, bpa=-4.787 degrees ! Estimated noise=0.238335 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8135 x 1.997 at -4.787 degrees (North through East) ! Clean map min=-0.00076432 max=0.10319 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.643 mas, bmaj=1.668 mas, bpa=-3.233 degrees ! Estimated noise=0.489341 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0794315 Jy ! Component: 100 - total flux cleaned = 0.10592 Jy ! Component: 150 - total flux cleaned = 0.120469 Jy ! Component: 200 - total flux cleaned = 0.129361 Jy ! Total flux subtracted in 200 components = 0.129361 Jy ! Clean residual min=-0.002673 max=0.004732 Jy/beam ! Clean residual mean=-0.000001 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.129361 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.129361 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8135 mas, bmaj=1.997 mas, bpa=-4.787 degrees ! Estimated noise=0.238335 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00667954 Jy ! Component: 100 - total flux cleaned = 0.0105765 Jy ! Component: 150 - total flux cleaned = 0.012975 Jy ! Component: 200 - total flux cleaned = 0.0146227 Jy ! Total flux subtracted in 200 components = 0.0146227 Jy ! Clean residual min=-0.001087 max=0.001179 Jy/beam ! Clean residual mean=-0.000001 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.143984 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.143984 Jy ! Inverting map ! Added new window around map position (1.8, 4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109926 Jy ! Component: 100 - total flux cleaned = 0.0018631 Jy ! Component: 150 - total flux cleaned = 0.00248339 Jy ! Component: 200 - total flux cleaned = 0.00312347 Jy ! Total flux subtracted in 200 components = 0.00312347 Jy ! Clean residual min=-0.000984 max=0.001000 Jy/beam ! Clean residual mean=-0.000000 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.147107 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 42 components and 0.147107 Jy ! Inverting map ! Added new window around map position (3.4, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00093148 Jy ! Component: 100 - total flux cleaned = 0.00143461 Jy ! Component: 150 - total flux cleaned = 0.00183031 Jy ! Component: 200 - total flux cleaned = 0.00218534 Jy ! Total flux subtracted in 200 components = 0.00218534 Jy ! Clean residual min=-0.000862 max=0.000752 Jy/beam ! Clean residual mean=-0.000000 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.149293 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 62 components and 0.149293 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.02 mas, bmaj=3.018 mas, bpa=-5.465 degrees ! Estimated noise=0.298402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000710571 Jy ! Component: 100 - total flux cleaned = 0.00123883 Jy ! Component: 150 - total flux cleaned = 0.00162222 Jy ! Component: 200 - total flux cleaned = 0.00185035 Jy ! Total flux subtracted in 200 components = 0.00185035 Jy ! Clean residual min=-0.001076 max=0.001060 Jy/beam ! Clean residual mean=-0.000000 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.151143 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170189 Jy ! Component: 100 - total flux cleaned = 0.00030931 Jy ! Component: 150 - total flux cleaned = 0.000424435 Jy ! Component: 200 - total flux cleaned = 0.000513088 Jy ! Total flux subtracted in 200 components = 0.000513088 Jy ! Clean residual min=-0.001045 max=0.001008 Jy/beam ! Clean residual mean=-0.000000 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.151656 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 103 components and 0.151656 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8135 mas, bmaj=1.997 mas, bpa=-4.787 degrees ! Estimated noise=0.238335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.6305e-05 Jy ! Component: 100 - total flux cleaned = 7.5286e-05 Jy ! Component: 150 - total flux cleaned = 6.24221e-05 Jy ! Component: 200 - total flux cleaned = 2.74286e-05 Jy ! Total flux subtracted in 200 components = 2.74286e-05 Jy ! Clean residual min=-0.000729 max=0.000729 Jy/beam ! Clean residual mean=-0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.151684 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 117 components and 0.151684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061739Jy sigma=0.723060 ! Fit after self-cal, rms=0.061735Jy sigma=0.723034 wmodel J1643+0732_X_map.mod ! Writing 117 model components to file: J1643+0732_X_map.mod wobs J1643+0732_X_uvs.fits ! Writing UV FITS file: J1643+0732_X_uvs.fits wwins J1643+0732_X_map.win ! wwins: Wrote 6 windows to J1643+0732_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232281 Jy ! Component: 100 - total flux cleaned = -0.000320904 Jy ! Component: 150 - total flux cleaned = -0.000369392 Jy ! Component: 200 - total flux cleaned = -0.000440236 Jy ! Component: 250 - total flux cleaned = -0.000520959 Jy ! Component: 300 - total flux cleaned = -0.000577051 Jy ! Component: 350 - total flux cleaned = -0.000588049 Jy ! Component: 400 - total flux cleaned = -0.000598804 Jy ! Component: 450 - total flux cleaned = -0.000609276 Jy ! Component: 500 - total flux cleaned = -0.000588513 Jy ! Component: 550 - total flux cleaned = -0.000619747 Jy ! Component: 600 - total flux cleaned = -0.000650487 Jy ! Component: 650 - total flux cleaned = -0.000680525 Jy ! Component: 700 - total flux cleaned = -0.000680456 Jy ! Component: 750 - total flux cleaned = -0.000680484 Jy ! Component: 800 - total flux cleaned = -0.000680524 Jy ! Component: 850 - total flux cleaned = -0.000680611 Jy ! Component: 900 - total flux cleaned = -0.000671179 Jy ! Component: 950 - total flux cleaned = -0.000708852 Jy ! Component: 1000 - total flux cleaned = -0.000699577 Jy ! Component: 1050 - total flux cleaned = -0.000727341 Jy ! Component: 1100 - total flux cleaned = -0.000736533 Jy ! Component: 1150 - total flux cleaned = -0.00074562 Jy ! Component: 1200 - total flux cleaned = -0.00075467 Jy ! Component: 1250 - total flux cleaned = -0.000790418 Jy ! Component: 1300 - total flux cleaned = -0.000799268 Jy ! Component: 1350 - total flux cleaned = -0.000808006 Jy ! Component: 1400 - total flux cleaned = -0.000799275 Jy ! Component: 1450 - total flux cleaned = -0.000799268 Jy ! Component: 1500 - total flux cleaned = -0.000833538 Jy ! Component: 1550 - total flux cleaned = -0.000850423 Jy ! Component: 1600 - total flux cleaned = -0.000842061 Jy ! Component: 1650 - total flux cleaned = -0.00087565 Jy ! Component: 1700 - total flux cleaned = -0.000867349 Jy ! Component: 1750 - total flux cleaned = -0.000900475 Jy ! Component: 1800 - total flux cleaned = -0.000908692 Jy ! Component: 1850 - total flux cleaned = -0.000924988 Jy ! Component: 1900 - total flux cleaned = -0.000900645 Jy ! Component: 1950 - total flux cleaned = -0.000948982 Jy ! Component: 2000 - total flux cleaned = -0.000932894 Jy ! Component: 2050 - total flux cleaned = -0.00095674 Jy ! Component: 2100 - total flux cleaned = -0.000956788 Jy ! Component: 2150 - total flux cleaned = -0.000972488 Jy ! Component: 2200 - total flux cleaned = -0.000972378 Jy ! Component: 2250 - total flux cleaned = -0.00100341 Jy ! Component: 2300 - total flux cleaned = -0.00100338 Jy ! Component: 2350 - total flux cleaned = -0.00101873 Jy ! Component: 2400 - total flux cleaned = -0.0010187 Jy ! Component: 2450 - total flux cleaned = -0.00101873 Jy ! Component: 2500 - total flux cleaned = -0.00102618 Jy ! Component: 2550 - total flux cleaned = -0.00103374 Jy ! Component: 2600 - total flux cleaned = -0.00104868 Jy ! Component: 2650 - total flux cleaned = -0.00104867 Jy ! Component: 2700 - total flux cleaned = -0.00107087 Jy ! Component: 2750 - total flux cleaned = -0.00107088 Jy ! Component: 2800 - total flux cleaned = -0.00109282 Jy ! Component: 2850 - total flux cleaned = -0.00109286 Jy ! Component: 2900 - total flux cleaned = -0.00107838 Jy ! Component: 2950 - total flux cleaned = -0.00107118 Jy ! Component: 3000 - total flux cleaned = -0.00107838 Jy ! Component: 3050 - total flux cleaned = -0.00112107 Jy ! Component: 3100 - total flux cleaned = -0.00111399 Jy ! Component: 3150 - total flux cleaned = -0.00111393 Jy ! Component: 3200 - total flux cleaned = -0.00109286 Jy ! Component: 3250 - total flux cleaned = -0.00112086 Jy ! Component: 3300 - total flux cleaned = -0.00112084 Jy ! Component: 3350 - total flux cleaned = -0.00112081 Jy ! Component: 3400 - total flux cleaned = -0.00112081 Jy ! Component: 3450 - total flux cleaned = -0.00111396 Jy ! Component: 3500 - total flux cleaned = -0.0011071 Jy ! Component: 3550 - total flux cleaned = -0.00110031 Jy ! Component: 3600 - total flux cleaned = -0.00114095 Jy ! Component: 3650 - total flux cleaned = -0.0010937 Jy ! Component: 3700 - total flux cleaned = -0.00110045 Jy ! Component: 3750 - total flux cleaned = -0.00111386 Jy ! Component: 3800 - total flux cleaned = -0.00111388 Jy ! Component: 3850 - total flux cleaned = -0.00110726 Jy ! Component: 3900 - total flux cleaned = -0.00112045 Jy ! Component: 3950 - total flux cleaned = -0.00112042 Jy ! Component: 4000 - total flux cleaned = -0.00110083 Jy ! Component: 4050 - total flux cleaned = -0.00110086 Jy ! Total flux subtracted in 4096 components = -0.00112686 Jy ! Clean residual min=-0.000505 max=0.000547 Jy/beam ! Clean residual mean=-0.000000 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.150557 Jy keep ! Adding 354 model components to the UV plane model. ! The established model now contains 471 components and 0.150557 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1643+0732_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8135 x 1.997 at -4.787 degrees (North through East) ! Clean map min=-0.00054049 max=0.10333 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1643+0732_X_map.fits wmodel /vlbi/bp222/temp_maps//J1643+0732_X_map.mod ! Writing 471 model components to file: /vlbi/bp222/temp_maps//J1643+0732_X_map.mod wobs /vlbi/bp222/temp_maps//J1643+0732_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1643+0732_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1643+0732_X_map.win ! wwins: Wrote 7 windows to /vlbi/bp222/temp_maps//J1643+0732_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.103327 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000114194 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.331552 0.331552 0.663105 1.32621 2.65242 5.30484 10.6097 21.2193 42.4387 84.8774 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.103 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 904.834 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1643+0732_X_dfm.log closed on Thu Feb 14 23:03:38 2019