! Started logfile: J1635+5955_S_dfm.log on Fri Feb 15 19:56:17 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J1635+5955_S_uvm.fits
! Reading UV FITS file: J1635+5955_S_uvm.fits
! AN table 1: 22 integrations on 28 of 28 possible baselines.
! AN table 2: 45 integrations on 36 of 36 possible baselines.
! AN table 3: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.912648 visibilities/baseline/integration-bin.
! Found source: J1635+5955
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 16048 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1635+5955_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
!  A total of 37 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
!  A total of 37 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
!  A total of 37 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 89 telescope corrections were flagged in sub-array 1.
!  A total of 229 telescope corrections were flagged in sub-array 2.
!  A total of 480 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.015900Jy  sigma=15.970579
! Fit after  self-cal, rms=0.812532Jy  sigma=12.767424
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.622 mas, bmaj=5.926 mas, bpa=10.17 degrees
! Estimated noise=0.632556 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.149618 Jy
! Component: 100  -  total flux cleaned = 0.182424 Jy
! Total flux subtracted in 100 components = 0.182424 Jy
! Clean residual min=-0.004800 max=0.010057 Jy/beam
! Clean residual mean=-0.000009 rms=0.001251 Jy/beam
! Combined flux in latest and established models = 0.182424 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.182424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.074234Jy  sigma=0.984779
! Fit after  self-cal, rms=0.074223Jy  sigma=0.984663
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010524 Jy
! Component: 100  -  total flux cleaned = 0.0156908 Jy
! Total flux subtracted in 100 components = 0.0156908 Jy
! Clean residual min=-0.005028 max=0.004513 Jy/beam
! Clean residual mean=-0.000006 rms=0.001094 Jy/beam
! Combined flux in latest and established models = 0.198115 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 0.198115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.072504Jy  sigma=0.958969
! Fit after  self-cal, rms=0.072496Jy  sigma=0.958829
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.275 mas, bmaj=6.98 mas, bpa=8.705 degrees
! Estimated noise=0.425732 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101384 Jy
! Component: 100  -  total flux cleaned = 0.00101735 Jy
! Component: 150  -  total flux cleaned = 0.0010185 Jy
! Component: 200  -  total flux cleaned = 0.00108319 Jy
! Total flux subtracted in 200 components = 0.00108319 Jy
! Clean residual min=-0.004444 max=0.004258 Jy/beam
! Clean residual mean=-0.000017 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 0.199198 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 27 components and 0.199198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.072123Jy  sigma=0.955598
! Fit after  self-cal, rms=0.072118Jy  sigma=0.955547
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.275 x 6.98 at 8.705 degrees (North through East)
! Clean map  min=-0.0043392  max=0.19468 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.10     HN        1.12     KP        1.03     
!   MK        1.03     NL        0.93     OV        1.12     SC        1.05     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.02     KP        1.01     LA        1.02     
!   MK        0.96     NL        0.96     OV        1.02     PT        1.01     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.99     FD        1.04     HN        1.03     KP        0.96     
!   LA        0.91     MK        1.05     NL        1.05     OV        1.00     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.06     HN        1.11     KP        1.09     
!   MK        1.02     NL        0.68     OV        1.09     SC        0.76     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        1.03     KP        1.01     LA        0.99     
!   MK        0.94     NL        1.63     OV        1.01     PT        1.04     
!   SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.81     FD        0.97     HN        1.03     KP        0.94     
!   LA        0.92     MK        1.07     NL        0.98     OV        1.04     
!   PT        0.97     SC        1.14     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.07     HN        1.07     KP        1.03     
!   MK        1.02     NL        0.87     OV        1.13     SC        1.07     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.00     KP        0.96     LA        1.04     
!   MK        0.94     NL        1.18     OV        1.03     PT        1.02     
!   SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.79     FD        1.04     HN        0.99     KP        0.94     
!   LA        0.92     MK        1.06     NL        1.00     OV        0.98     
!   PT        1.01     SC        1.02     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.072118Jy  sigma=0.955547
! Fit after  self-cal, rms=0.068428Jy  sigma=0.901176
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.294 mas, bmaj=7.005 mas, bpa=8.572 degrees
! Estimated noise=0.426257 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00082764 Jy
! Component: 100  -  total flux cleaned = 0.000876855 Jy
! Component: 150  -  total flux cleaned = 0.000897279 Jy
! Component: 200  -  total flux cleaned = 0.000896523 Jy
! Total flux subtracted in 200 components = 0.000896523 Jy
! Clean residual min=-0.002403 max=0.002343 Jy/beam
! Clean residual mean=0.000002 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.200095 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 39 components and 0.200095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.068397Jy  sigma=0.901043
! Fit after  self-cal, rms=0.068447Jy  sigma=0.900698
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.068447Jy  sigma=0.900698
! Fit after  self-cal, rms=0.068590Jy  sigma=0.888517
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.289 mas, bmaj=7.009 mas, bpa=8.596 degrees
! Estimated noise=0.429759 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137864 Jy
! Component: 100  -  total flux cleaned = 0.00138157 Jy
! Component: 150  -  total flux cleaned = 0.00138035 Jy
! Component: 200  -  total flux cleaned = 0.00138057 Jy
! Total flux subtracted in 200 components = 0.00138057 Jy
! Clean residual min=-0.002465 max=0.002254 Jy/beam
! Clean residual mean=0.000000 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.201476 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 47 components and 0.201476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.068544Jy  sigma=0.888129
! Fit after  self-cal, rms=0.068531Jy  sigma=0.888072
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.56894e-06 Jy
! Component: 100  -  total flux cleaned = 5.33191e-06 Jy
! Component: 150  -  total flux cleaned = 4.64382e-06 Jy
! Component: 200  -  total flux cleaned = -6.68281e-06 Jy
! Total flux subtracted in 200 components = -6.68281e-06 Jy
! Clean residual min=-0.002461 max=0.002224 Jy/beam
! Clean residual mean=0.000000 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.201469 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 52 components and 0.201469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.068527Jy  sigma=0.887986
! Fit after  self-cal, rms=0.068527Jy  sigma=0.887982
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.068527Jy  sigma=0.887982
! Fit after  self-cal, rms=0.065021Jy  sigma=0.855214
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.292 mas, bmaj=7.009 mas, bpa=8.72 degrees
! Estimated noise=0.429504 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000951215 Jy
! Component: 100  -  total flux cleaned = 0.00104142 Jy
! Component: 150  -  total flux cleaned = 0.00114075 Jy
! Component: 200  -  total flux cleaned = 0.0012472 Jy
! Total flux subtracted in 200 components = 0.0012472 Jy
! Clean residual min=-0.001577 max=0.001557 Jy/beam
! Clean residual mean=-0.000002 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.202716 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 57 components and 0.202716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.064991Jy  sigma=0.854814
! Fit after  self-cal, rms=0.064996Jy  sigma=0.854609
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-116.5, 22.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000984841 Jy
! Component: 100  -  total flux cleaned = 0.000878553 Jy
! Component: 150  -  total flux cleaned = 0.000691336 Jy
! Component: 200  -  total flux cleaned = 0.000546445 Jy
! Total flux subtracted in 200 components = 0.000546445 Jy
! Clean residual min=-0.001510 max=0.001442 Jy/beam
! Clean residual mean=-0.000002 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.203263 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 76 components and 0.203263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.064954Jy  sigma=0.854120
! Fit after  self-cal, rms=0.064947Jy  sigma=0.854071
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.064947Jy  sigma=0.854071
! Fit after  self-cal, rms=0.064869Jy  sigma=0.853933
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.454 mas, bmaj=10.54 mas, bpa=15.27 degrees
! Estimated noise=0.522226 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000243602 Jy
! Component: 100  -  total flux cleaned = 0.000366594 Jy
! Component: 150  -  total flux cleaned = 0.000370131 Jy
! Component: 200  -  total flux cleaned = 0.000398273 Jy
! Total flux subtracted in 200 components = 0.000398273 Jy
! Clean residual min=-0.001412 max=0.001282 Jy/beam
! Clean residual mean=-0.000003 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.203661 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 86 components and 0.203661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.064859Jy  sigma=0.853878
! Fit after  self-cal, rms=0.064855Jy  sigma=0.853839
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000124922 Jy
! Component: 100  -  total flux cleaned = 0.000112248 Jy
! Component: 150  -  total flux cleaned = 0.000100994 Jy
! Component: 200  -  total flux cleaned = 9.06397e-05 Jy
! Total flux subtracted in 200 components = 9.06397e-05 Jy
! Clean residual min=-0.001410 max=0.001295 Jy/beam
! Clean residual mean=-0.000002 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.203751 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 91 components and 0.203751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.064853Jy  sigma=0.853867
! Fit after  self-cal, rms=0.064852Jy  sigma=0.853862
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.291 mas, bmaj=7.006 mas, bpa=8.775 degrees
! Estimated noise=0.429785 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.291 x 7.006 at 8.775 degrees (North through East)
! Clean map  min=-0.0014205  max=0.19606 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.633 mas, bmaj=5.947 mas, bpa=9.855 degrees
! Estimated noise=0.643243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.151543 Jy
! Component: 100  -  total flux cleaned = 0.184749 Jy
! Component: 150  -  total flux cleaned = 0.194625 Jy
! Component: 200  -  total flux cleaned = 0.199326 Jy
! Total flux subtracted in 200 components = 0.199326 Jy
! Clean residual min=-0.002324 max=0.002473 Jy/beam
! Clean residual mean=-0.000002 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.199326 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.199326 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.291 mas, bmaj=7.006 mas, bpa=8.775 degrees
! Estimated noise=0.429785 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00300332 Jy
! Component: 100  -  total flux cleaned = 0.00438697 Jy
! Component: 150  -  total flux cleaned = 0.00490529 Jy
! Component: 200  -  total flux cleaned = 0.00515112 Jy
! Total flux subtracted in 200 components = 0.00515112 Jy
! Clean residual min=-0.001641 max=0.001389 Jy/beam
! Clean residual mean=-0.000002 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.204477 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 36 components and 0.204478 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.454 mas, bmaj=10.54 mas, bpa=15.27 degrees
! Estimated noise=0.522226 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000100647 Jy
! Component: 100  -  total flux cleaned = -0.000179678 Jy
! Component: 150  -  total flux cleaned = -0.00020665 Jy
! Component: 200  -  total flux cleaned = -0.000223542 Jy
! Total flux subtracted in 200 components = -0.000223542 Jy
! Clean residual min=-0.001428 max=0.001280 Jy/beam
! Clean residual mean=-0.000002 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.204254 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.13551e-05 Jy
! Component: 100  -  total flux cleaned = -8.15054e-05 Jy
! Component: 150  -  total flux cleaned = -0.000120985 Jy
! Component: 200  -  total flux cleaned = -0.000154986 Jy
! Total flux subtracted in 200 components = -0.000154986 Jy
! Clean residual min=-0.001425 max=0.001281 Jy/beam
! Clean residual mean=-0.000001 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.204099 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 55 components and 0.204099 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.291 mas, bmaj=7.006 mas, bpa=8.775 degrees
! Estimated noise=0.429785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141305 Jy
! Component: 100  -  total flux cleaned = 4.82019e-05 Jy
! Component: 150  -  total flux cleaned = 2.73296e-05 Jy
! Component: 200  -  total flux cleaned = 2.70666e-05 Jy
! Total flux subtracted in 200 components = 2.70666e-05 Jy
! Clean residual min=-0.001515 max=0.001378 Jy/beam
! Clean residual mean=-0.000001 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.204126 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 72 components and 0.204126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.064848Jy  sigma=0.853813
! Fit after  self-cal, rms=0.064845Jy  sigma=0.853787
wmodel J1635+5955_S_map.mod
! Writing 72 model components to file: J1635+5955_S_map.mod
wobs   J1635+5955_S_uvs.fits
! Writing UV FITS file: J1635+5955_S_uvs.fits
wwins  J1635+5955_S_map.win
! wwins: Wrote 2 windows to J1635+5955_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000278237 Jy
! Component: 100  -  total flux cleaned = -0.000443961 Jy
! Component: 150  -  total flux cleaned = -0.000623129 Jy
! Component: 200  -  total flux cleaned = -0.000751883 Jy
! Component: 250  -  total flux cleaned = -0.00070998 Jy
! Component: 300  -  total flux cleaned = -0.000730259 Jy
! Component: 350  -  total flux cleaned = -0.000789193 Jy
! Component: 400  -  total flux cleaned = -0.000769623 Jy
! Component: 450  -  total flux cleaned = -0.000750891 Jy
! Component: 500  -  total flux cleaned = -0.00071438 Jy
! Component: 550  -  total flux cleaned = -0.000678417 Jy
! Component: 600  -  total flux cleaned = -0.000696279 Jy
! Component: 650  -  total flux cleaned = -0.000625985 Jy
! Component: 700  -  total flux cleaned = -0.000591787 Jy
! Component: 750  -  total flux cleaned = -0.000591924 Jy
! Component: 800  -  total flux cleaned = -0.000541209 Jy
! Component: 850  -  total flux cleaned = -0.000491384 Jy
! Component: 900  -  total flux cleaned = -0.000540539 Jy
! Component: 950  -  total flux cleaned = -0.00044285 Jy
! Component: 1000  -  total flux cleaned = -0.000442726 Jy
! Component: 1050  -  total flux cleaned = -0.000442822 Jy
! Component: 1100  -  total flux cleaned = -0.000458519 Jy
! Component: 1150  -  total flux cleaned = -0.000536277 Jy
! Component: 1200  -  total flux cleaned = -0.000458964 Jy
! Component: 1250  -  total flux cleaned = -0.00048984 Jy
! Component: 1300  -  total flux cleaned = -0.000550144 Jy
! Component: 1350  -  total flux cleaned = -0.000594823 Jy
! Component: 1400  -  total flux cleaned = -0.000609419 Jy
! Component: 1450  -  total flux cleaned = -0.000609229 Jy
! Component: 1500  -  total flux cleaned = -0.000623692 Jy
! Component: 1550  -  total flux cleaned = -0.000666991 Jy
! Component: 1600  -  total flux cleaned = -0.000652585 Jy
! Component: 1650  -  total flux cleaned = -0.000638597 Jy
! Component: 1700  -  total flux cleaned = -0.000652658 Jy
! Component: 1750  -  total flux cleaned = -0.000638592 Jy
! Component: 1800  -  total flux cleaned = -0.00056912 Jy
! Component: 1850  -  total flux cleaned = -0.000596739 Jy
! Component: 1900  -  total flux cleaned = -0.000555502 Jy
! Component: 1950  -  total flux cleaned = -0.000555596 Jy
! Component: 2000  -  total flux cleaned = -0.000582576 Jy
! Component: 2050  -  total flux cleaned = -0.000555564 Jy
! Component: 2100  -  total flux cleaned = -0.000475821 Jy
! Component: 2150  -  total flux cleaned = -0.000489162 Jy
! Component: 2200  -  total flux cleaned = -0.000462913 Jy
! Component: 2250  -  total flux cleaned = -0.000410961 Jy
! Component: 2300  -  total flux cleaned = -0.00042382 Jy
! Component: 2350  -  total flux cleaned = -0.000475307 Jy
! Component: 2400  -  total flux cleaned = -0.0004495 Jy
! Component: 2450  -  total flux cleaned = -0.00034801 Jy
! Component: 2500  -  total flux cleaned = -0.000360489 Jy
! Component: 2550  -  total flux cleaned = -0.000335459 Jy
! Component: 2600  -  total flux cleaned = -0.000310541 Jy
! Component: 2650  -  total flux cleaned = -0.000224042 Jy
! Component: 2700  -  total flux cleaned = -0.000236254 Jy
! Component: 2750  -  total flux cleaned = -0.000187541 Jy
! Component: 2800  -  total flux cleaned = -0.000199655 Jy
! Component: 2850  -  total flux cleaned = -0.000163488 Jy
! Component: 2900  -  total flux cleaned = -0.000139456 Jy
! Component: 2950  -  total flux cleaned = -7.99131e-05 Jy
! Component: 3000  -  total flux cleaned = -5.64481e-05 Jy
! Component: 3050  -  total flux cleaned = -4.47414e-05 Jy
! Component: 3100  -  total flux cleaned = -4.47844e-05 Jy
! Component: 3150  -  total flux cleaned = -9.98158e-06 Jy
! Component: 3200  -  total flux cleaned = 2.47588e-05 Jy
! Component: 3250  -  total flux cleaned = 1.32888e-05 Jy
! Component: 3300  -  total flux cleaned = 5.90759e-05 Jy
! Component: 3350  -  total flux cleaned = 9.31591e-05 Jy
! Component: 3400  -  total flux cleaned = 0.00014967 Jy
! Component: 3450  -  total flux cleaned = 0.000138374 Jy
! Component: 3500  -  total flux cleaned = 0.000160842 Jy
! Component: 3550  -  total flux cleaned = 0.000249625 Jy
! Component: 3600  -  total flux cleaned = 0.000216452 Jy
! Component: 3650  -  total flux cleaned = 0.000227526 Jy
! Component: 3700  -  total flux cleaned = 0.000271202 Jy
! Component: 3750  -  total flux cleaned = 0.000271251 Jy
! Component: 3800  -  total flux cleaned = 0.000292884 Jy
! Component: 3850  -  total flux cleaned = 0.000292877 Jy
! Component: 3900  -  total flux cleaned = 0.000324867 Jy
! Component: 3950  -  total flux cleaned = 0.000303613 Jy
! Component: 4000  -  total flux cleaned = 0.000335325 Jy
! Component: 4050  -  total flux cleaned = 0.000335286 Jy
! Total flux subtracted in 4096 components = 0.000366612 Jy
! Clean residual min=-0.000574 max=0.000675 Jy/beam
! Clean residual mean=0.000001 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.204493 Jy
keep
! Adding 283 model components to the UV plane model.
! The established model now contains 355 components and 0.204493 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J1635+5955_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.291 x 7.006 at 8.775 degrees (North through East)
! Clean map  min=-0.0012867  max=0.19601 Jy/beam
! Writing clean map to FITS file: J1635+5955_S_map.fits
wmodel J1635+5955_S_map.mod
! Writing 355 model components to file: J1635+5955_S_map.mod
wobs   J1635+5955_S_uvs.fits
! Writing UV FITS file: J1635+5955_S_uvs.fits
wwins  J1635+5955_S_map.win
! wwins: Wrote 3 windows to J1635+5955_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.196014 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000193945 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.296833 0.296833 0.593667 1.18733 2.37467 4.74934 9.49867 18.9973 37.9947 75.9894
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.196 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1010.67 
quit
! Quitting program
! Log file J1635+5955_S_dfm.log closed on Fri Feb 15 19:56:22 2019