! Started logfile: J1624-3213_S_dfm.log on Fri Feb 15 19:56:12 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J1624-3213_S_uvm.fits
! Reading UV FITS file: J1624-3213_S_uvm.fits
! AN table 1: 23 integrations on 36 of 36 possible baselines.
! AN table 2: 92 integrations on 36 of 36 possible baselines.
! AN table 3: 110 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.69907 visibilities/baseline/integration-bin.
! Found source: J1624-3213
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 18036 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1624-3213_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 149 telescope corrections were flagged in sub-array 2.
!  A total of 161 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 149 telescope corrections were flagged in sub-array 2.
!  A total of 161 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 149 telescope corrections were flagged in sub-array 2.
!  A total of 161 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 207 telescope corrections were flagged in sub-array 1.
!  A total of 828 telescope corrections were flagged in sub-array 2.
!  A total of 770 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.018186Jy  sigma=9.070879
! Fit after  self-cal, rms=0.858164Jy  sigma=7.580057
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.658 mas, bmaj=8.609 mas, bpa=-9.956 degrees
! Estimated noise=1.15351 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105455 Jy
! Component: 100  -  total flux cleaned = 0.139139 Jy
! Total flux subtracted in 100 components = 0.139139 Jy
! Clean residual min=-0.008284 max=0.016113 Jy/beam
! Clean residual mean=-0.000024 rms=0.002155 Jy/beam
! Combined flux in latest and established models = 0.139139 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.139139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.106823Jy  sigma=0.851166
! Fit after  self-cal, rms=0.106294Jy  sigma=0.849077
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.019374 Jy
! Component: 100  -  total flux cleaned = 0.0316924 Jy
! Total flux subtracted in 100 components = 0.0316924 Jy
! Clean residual min=-0.007043 max=0.010033 Jy/beam
! Clean residual mean=-0.000019 rms=0.001639 Jy/beam
! Combined flux in latest and established models = 0.170832 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 25 components and 0.170832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.101109Jy  sigma=0.785537
! Fit after  self-cal, rms=0.100960Jy  sigma=0.784965
! Inverting map 
! Added new window around map position (-5.5, 9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010255 Jy
! Component: 100  -  total flux cleaned = 0.0170858 Jy
! Total flux subtracted in 100 components = 0.0170858 Jy
! Clean residual min=-0.006449 max=0.008598 Jy/beam
! Clean residual mean=-0.000016 rms=0.001450 Jy/beam
! Combined flux in latest and established models = 0.187918 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 35 components and 0.187918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.099440Jy  sigma=0.765740
! Fit after  self-cal, rms=0.099342Jy  sigma=0.765055
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.239 mas, bmaj=10.57 mas, bpa=-12.18 degrees
! Estimated noise=0.732077 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.5, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117069 Jy
! Component: 100  -  total flux cleaned = 0.0190962 Jy
! Component: 150  -  total flux cleaned = 0.0244835 Jy
! Component: 200  -  total flux cleaned = 0.0285753 Jy
! Total flux subtracted in 200 components = 0.0285753 Jy
! Clean residual min=-0.004701 max=0.004297 Jy/beam
! Clean residual mean=-0.000018 rms=0.001185 Jy/beam
! Combined flux in latest and established models = 0.216493 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 78 components and 0.216493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097764Jy  sigma=0.748180
! Fit after  self-cal, rms=0.097671Jy  sigma=0.747705
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.239 x 10.57 at -12.18 degrees (North through East)
! Clean map  min=-0.0045058  max=0.14051 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.38     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.89     MK        1.00     NL        0.96     PT        0.96     
!   SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.97     HN        1.01     KP        0.92     LA        0.93     
!   MK        0.94     NL        1.06     OV        0.94     PT        0.96     
!   SC        1.01     
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.77     FD        1.04     HN        1.21     KP        1.09     
!   MK        1.04     NL        1.02     OV        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.92     FD        1.02     HN        1.14     KP        0.93     
!   LA        0.84     MK        0.94     NL        0.97     PT        0.93     
!   SC        1.07     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     HN        1.08     KP        0.93     LA        0.82     
!   MK        0.95     NL        0.99     OV        0.91     PT        1.00     
!   SC        0.95     
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.86     FD        1.03     HN        1.16     KP        1.11     
!   MK        1.08     NL        1.22     OV        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.43     FD        1.03     HN        0.95     KP        0.94     
!   LA        0.79     MK        0.96     NL        0.91     PT        0.98     
!   SC        1.07     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.96     HN        1.06     KP        0.96     LA        0.84     
!   MK        0.97     NL        1.02     OV        0.92     PT        0.97     
!   SC        1.04     
! 
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     FD        1.05     HN        1.26     KP        1.06     
!   MK        1.12     NL        0.97     OV        1.02     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097671Jy  sigma=0.747705
! Fit after  self-cal, rms=0.103657Jy  sigma=0.723469
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.274 mas, bmaj=10.57 mas, bpa=-11.96 degrees
! Estimated noise=0.734563 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00292482 Jy
! Component: 100  -  total flux cleaned = -0.00343959 Jy
! Component: 150  -  total flux cleaned = -0.00363918 Jy
! Component: 200  -  total flux cleaned = -0.00372647 Jy
! Total flux subtracted in 200 components = -0.00372647 Jy
! Clean residual min=-0.002640 max=0.002717 Jy/beam
! Clean residual mean=0.000019 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.212767 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 100 components and 0.212767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.103548Jy  sigma=0.722583
! Fit after  self-cal, rms=0.103622Jy  sigma=0.722247
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.103622Jy  sigma=0.722247
! Fit after  self-cal, rms=0.104718Jy  sigma=0.720294
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.289 mas, bmaj=10.59 mas, bpa=-11.9 degrees
! Estimated noise=0.732698 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00197874 Jy
! Component: 100  -  total flux cleaned = -0.00242955 Jy
! Component: 150  -  total flux cleaned = -0.00254731 Jy
! Component: 200  -  total flux cleaned = -0.00261369 Jy
! Total flux subtracted in 200 components = -0.00261369 Jy
! Clean residual min=-0.002450 max=0.002299 Jy/beam
! Clean residual mean=0.000014 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.210153 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 118 components and 0.210153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.104660Jy  sigma=0.719898
! Fit after  self-cal, rms=0.104716Jy  sigma=0.719837
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.23441e-05 Jy
! Component: 100  -  total flux cleaned = 6.1543e-05 Jy
! Component: 150  -  total flux cleaned = 3.43324e-05 Jy
! Component: 200  -  total flux cleaned = 3.47981e-05 Jy
! Total flux subtracted in 200 components = 3.47981e-05 Jy
! Clean residual min=-0.002447 max=0.002279 Jy/beam
! Clean residual mean=0.000015 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.210188 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 132 components and 0.210188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.104701Jy  sigma=0.719690
! Fit after  self-cal, rms=0.104713Jy  sigma=0.719670
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.104713Jy  sigma=0.719670
! Fit after  self-cal, rms=0.107400Jy  sigma=0.716887
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.296 mas, bmaj=10.61 mas, bpa=-11.93 degrees
! Estimated noise=0.732963 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103074 Jy
! Component: 100  -  total flux cleaned = -0.00118544 Jy
! Component: 150  -  total flux cleaned = -0.00125409 Jy
! Component: 200  -  total flux cleaned = -0.0012846 Jy
! Total flux subtracted in 200 components = -0.0012846 Jy
! Clean residual min=-0.002089 max=0.002200 Jy/beam
! Clean residual mean=0.000008 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.208903 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 146 components and 0.208903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.107360Jy  sigma=0.716685
! Fit after  self-cal, rms=0.107536Jy  sigma=0.716573
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.93836e-05 Jy
! Component: 100  -  total flux cleaned = 4.56535e-05 Jy
! Component: 150  -  total flux cleaned = 7.01923e-05 Jy
! Component: 200  -  total flux cleaned = 4.82648e-05 Jy
! Total flux subtracted in 200 components = 4.82648e-05 Jy
! Clean residual min=-0.002060 max=0.002154 Jy/beam
! Clean residual mean=0.000009 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.208951 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 155 components and 0.208951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.107517Jy  sigma=0.716482
! Fit after  self-cal, rms=0.107525Jy  sigma=0.716471
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.107525Jy  sigma=0.716471
! Fit after  self-cal, rms=0.108212Jy  sigma=0.716383
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.103 mas, bmaj=21.26 mas, bpa=-9.107 degrees
! Estimated noise=0.901661 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00107826 Jy
! Component: 100  -  total flux cleaned = -0.00122999 Jy
! Component: 150  -  total flux cleaned = -0.00127829 Jy
! Component: 200  -  total flux cleaned = -0.00130842 Jy
! Total flux subtracted in 200 components = -0.00130842 Jy
! Clean residual min=-0.002490 max=0.002054 Jy/beam
! Clean residual mean=0.000016 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.207643 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 166 components and 0.207643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.108192Jy  sigma=0.716326
! Fit after  self-cal, rms=0.108240Jy  sigma=0.716301
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.81699e-05 Jy
! Component: 100  -  total flux cleaned = -4.24569e-05 Jy
! Component: 150  -  total flux cleaned = -5.47447e-05 Jy
! Component: 200  -  total flux cleaned = -4.43555e-05 Jy
! Total flux subtracted in 200 components = -4.43555e-05 Jy
! Clean residual min=-0.002538 max=0.002024 Jy/beam
! Clean residual mean=0.000017 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.207599 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 173 components and 0.207599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.108233Jy  sigma=0.716294
! Fit after  self-cal, rms=0.108237Jy  sigma=0.716285
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.298 mas, bmaj=10.62 mas, bpa=-11.96 degrees
! Estimated noise=0.732011 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.298 x 10.62 at -11.96 degrees (North through East)
! Clean map  min=-0.0019634  max=0.14131 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.691 mas, bmaj=8.643 mas, bpa=-9.818 degrees
! Estimated noise=1.16037 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105373 Jy
! Component: 100  -  total flux cleaned = 0.139627 Jy
! Component: 150  -  total flux cleaned = 0.158161 Jy
! Component: 200  -  total flux cleaned = 0.169706 Jy
! Total flux subtracted in 200 components = 0.169706 Jy
! Clean residual min=-0.004729 max=0.006369 Jy/beam
! Clean residual mean=-0.000011 rms=0.001184 Jy/beam
! Combined flux in latest and established models = 0.169706 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.169706 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.298 mas, bmaj=10.62 mas, bpa=-11.96 degrees
! Estimated noise=0.732011 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126649 Jy
! Component: 100  -  total flux cleaned = 0.0201506 Jy
! Component: 150  -  total flux cleaned = 0.0250399 Jy
! Component: 200  -  total flux cleaned = 0.0284733 Jy
! Total flux subtracted in 200 components = 0.0284733 Jy
! Clean residual min=-0.002621 max=0.002576 Jy/beam
! Clean residual mean=-0.000003 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.198179 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 72 components and 0.198179 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.103 mas, bmaj=21.26 mas, bpa=-9.107 degrees
! Estimated noise=0.901661 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362894 Jy
! Component: 100  -  total flux cleaned = 0.00569317 Jy
! Component: 150  -  total flux cleaned = 0.00694727 Jy
! Component: 200  -  total flux cleaned = 0.00772935 Jy
! Total flux subtracted in 200 components = 0.00772935 Jy
! Clean residual min=-0.002592 max=0.001970 Jy/beam
! Clean residual mean=0.000012 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.205909 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000493406 Jy
! Component: 100  -  total flux cleaned = 0.000765714 Jy
! Component: 150  -  total flux cleaned = 0.000807264 Jy
! Component: 200  -  total flux cleaned = 0.000827212 Jy
! Total flux subtracted in 200 components = 0.000827212 Jy
! Clean residual min=-0.002530 max=0.001988 Jy/beam
! Clean residual mean=0.000014 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.206736 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 133 components and 0.206736 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.298 mas, bmaj=10.62 mas, bpa=-11.96 degrees
! Estimated noise=0.732011 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000469921 Jy
! Component: 100  -  total flux cleaned = -0.000426962 Jy
! Component: 150  -  total flux cleaned = -0.000391212 Jy
! Component: 200  -  total flux cleaned = -0.000358489 Jy
! Total flux subtracted in 200 components = -0.000358489 Jy
! Clean residual min=-0.002252 max=0.002142 Jy/beam
! Clean residual mean=0.000007 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.206378 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 146 components and 0.206377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.108247Jy  sigma=0.716579
! Fit after  self-cal, rms=0.108218Jy  sigma=0.716461
wmodel J1624-3213_S_map.mod
! Writing 146 model components to file: J1624-3213_S_map.mod
wobs   J1624-3213_S_uvs.fits
! Writing UV FITS file: J1624-3213_S_uvs.fits
wwins  J1624-3213_S_map.win
! wwins: Wrote 3 windows to J1624-3213_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000276231 Jy
! Component: 100  -  total flux cleaned = 0.000347752 Jy
! Component: 150  -  total flux cleaned = 0.000483525 Jy
! Component: 200  -  total flux cleaned = 0.000648681 Jy
! Component: 250  -  total flux cleaned = 0.000712572 Jy
! Component: 300  -  total flux cleaned = 0.00077377 Jy
! Component: 350  -  total flux cleaned = 0.000803145 Jy
! Component: 400  -  total flux cleaned = 0.000920419 Jy
! Component: 450  -  total flux cleaned = 0.00100603 Jy
! Component: 500  -  total flux cleaned = 0.00111801 Jy
! Component: 550  -  total flux cleaned = 0.00114543 Jy
! Component: 600  -  total flux cleaned = 0.0012544 Jy
! Component: 650  -  total flux cleaned = 0.00136124 Jy
! Component: 700  -  total flux cleaned = 0.00141404 Jy
! Component: 750  -  total flux cleaned = 0.00151775 Jy
! Component: 800  -  total flux cleaned = 0.00156863 Jy
! Component: 850  -  total flux cleaned = 0.00164394 Jy
! Component: 900  -  total flux cleaned = 0.0016688 Jy
! Component: 950  -  total flux cleaned = 0.00174222 Jy
! Component: 1000  -  total flux cleaned = 0.00179054 Jy
! Component: 1050  -  total flux cleaned = 0.00183811 Jy
! Component: 1100  -  total flux cleaned = 0.00197883 Jy
! Component: 1150  -  total flux cleaned = 0.00200133 Jy
! Component: 1200  -  total flux cleaned = 0.002047 Jy
! Component: 1250  -  total flux cleaned = 0.00209223 Jy
! Component: 1300  -  total flux cleaned = 0.00224945 Jy
! Component: 1350  -  total flux cleaned = 0.00229335 Jy
! Component: 1400  -  total flux cleaned = 0.00233734 Jy
! Component: 1450  -  total flux cleaned = 0.00231567 Jy
! Component: 1500  -  total flux cleaned = 0.00240213 Jy
! Component: 1550  -  total flux cleaned = 0.00235944 Jy
! Component: 1600  -  total flux cleaned = 0.0023595 Jy
! Component: 1650  -  total flux cleaned = 0.00238091 Jy
! Component: 1700  -  total flux cleaned = 0.00242253 Jy
! Component: 1750  -  total flux cleaned = 0.00250454 Jy
! Component: 1800  -  total flux cleaned = 0.00238208 Jy
! Component: 1850  -  total flux cleaned = 0.00238239 Jy
! Component: 1900  -  total flux cleaned = 0.00242251 Jy
! Component: 1950  -  total flux cleaned = 0.00250182 Jy
! Component: 2000  -  total flux cleaned = 0.00242335 Jy
! Component: 2050  -  total flux cleaned = 0.00250129 Jy
! Component: 2100  -  total flux cleaned = 0.00248189 Jy
! Component: 2150  -  total flux cleaned = 0.00248184 Jy
! Component: 2200  -  total flux cleaned = 0.00253883 Jy
! Component: 2250  -  total flux cleaned = 0.00252008 Jy
! Component: 2300  -  total flux cleaned = 0.00257647 Jy
! Component: 2350  -  total flux cleaned = 0.00265069 Jy
! Component: 2400  -  total flux cleaned = 0.00261333 Jy
! Component: 2450  -  total flux cleaned = 0.00261348 Jy
! Component: 2500  -  total flux cleaned = 0.00264966 Jy
! Component: 2550  -  total flux cleaned = 0.00264967 Jy
! Component: 2600  -  total flux cleaned = 0.00270334 Jy
! Component: 2650  -  total flux cleaned = 0.00266772 Jy
! Component: 2700  -  total flux cleaned = 0.00279126 Jy
! Component: 2750  -  total flux cleaned = 0.00275603 Jy
! Component: 2800  -  total flux cleaned = 0.00273875 Jy
! Component: 2850  -  total flux cleaned = 0.00272157 Jy
! Component: 2900  -  total flux cleaned = 0.00280732 Jy
! Component: 2950  -  total flux cleaned = 0.00275619 Jy
! Component: 3000  -  total flux cleaned = 0.0028237 Jy
! Component: 3050  -  total flux cleaned = 0.00277345 Jy
! Component: 3100  -  total flux cleaned = 0.00284021 Jy
! Component: 3150  -  total flux cleaned = 0.00287332 Jy
! Component: 3200  -  total flux cleaned = 0.00280743 Jy
! Component: 3250  -  total flux cleaned = 0.00287272 Jy
! Component: 3300  -  total flux cleaned = 0.00285624 Jy
! Component: 3350  -  total flux cleaned = 0.00282392 Jy
! Component: 3400  -  total flux cleaned = 0.00282407 Jy
! Component: 3450  -  total flux cleaned = 0.00282407 Jy
! Component: 3500  -  total flux cleaned = 0.00283993 Jy
! Component: 3550  -  total flux cleaned = 0.00283994 Jy
! Component: 3600  -  total flux cleaned = 0.00287134 Jy
! Component: 3650  -  total flux cleaned = 0.00284029 Jy
! Component: 3700  -  total flux cleaned = 0.00285585 Jy
! Component: 3750  -  total flux cleaned = 0.00285597 Jy
! Component: 3800  -  total flux cleaned = 0.0029171 Jy
! Component: 3850  -  total flux cleaned = 0.00294753 Jy
! Component: 3900  -  total flux cleaned = 0.00296255 Jy
! Component: 3950  -  total flux cleaned = 0.00303776 Jy
! Component: 4000  -  total flux cleaned = 0.0029777 Jy
! Component: 4050  -  total flux cleaned = 0.00303726 Jy
! Total flux subtracted in 4096 components = 0.00305206 Jy
! Clean residual min=-0.000884 max=0.000814 Jy/beam
! Clean residual mean=0.000001 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.20943 Jy
keep
! Adding 277 model components to the UV plane model.
! The established model now contains 423 components and 0.20943 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J1624-3213_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.298 x 10.62 at -11.96 degrees (North through East)
! Clean map  min=-0.00177  max=0.14183 Jy/beam
! Writing clean map to FITS file: J1624-3213_S_map.fits
wmodel J1624-3213_S_map.mod
! Writing 423 model components to file: J1624-3213_S_map.mod
wobs   J1624-3213_S_uvs.fits
! Writing UV FITS file: J1624-3213_S_uvs.fits
wwins  J1624-3213_S_map.win
! wwins: Wrote 4 windows to J1624-3213_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.141825 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000275301 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.582338 0.582338 1.16468 2.32935 4.6587 9.31741 18.6348 37.2696 74.5393
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.141 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  515.164 
quit
! Quitting program
! Log file J1624-3213_S_dfm.log closed on Fri Feb 15 19:56:17 2019