! Started logfile: /vlbi/bp222/temp_maps//J1616-3509_X_dfm.log on Thu Feb 14 23:02:49 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1616-3509_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1616-3509_X_uvm.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! AN table 2: 23 integrations on 21 of 21 possible baselines. ! AN table 3: 23 integrations on 28 of 28 possible baselines. ! AN table 4: 69 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.847384 visibilities/baseline/integration-bin. ! Found source: J1616-3509 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 34980 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1616-3509_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 76 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 76 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 76 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 76 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 76 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 76 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 76 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 76 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 76 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 76 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 76 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 76 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.008979Jy sigma=12.352443 ! Fit after self-cal, rms=0.911239Jy sigma=11.047860 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6009 mas, bmaj=1.777 mas, bpa=-7.892 degrees ! Estimated noise=0.685982 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0679297 Jy ! Component: 100 - total flux cleaned = 0.0852651 Jy ! Total flux subtracted in 100 components = 0.0852651 Jy ! Clean residual min=-0.005348 max=0.011386 Jy/beam ! Clean residual mean=-0.000002 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.0852651 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0852651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088384Jy sigma=0.938292 ! Fit after self-cal, rms=0.087973Jy sigma=0.935113 ! Inverting map ! Added new window around map position (0.6, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107509 Jy ! Component: 100 - total flux cleaned = 0.0162773 Jy ! Total flux subtracted in 100 components = 0.0162773 Jy ! Clean residual min=-0.005438 max=0.009165 Jy/beam ! Clean residual mean=-0.000002 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.101542 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.101542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086242Jy sigma=0.893864 ! Fit after self-cal, rms=0.086147Jy sigma=0.892556 ! Inverting map ! Added new window around map position (-0.4, -3.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00788629 Jy ! Component: 100 - total flux cleaned = 0.0123755 Jy ! Total flux subtracted in 100 components = 0.0123755 Jy ! Clean residual min=-0.004575 max=0.006235 Jy/beam ! Clean residual mean=-0.000002 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.113918 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.113918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085308Jy sigma=0.872160 ! Fit after self-cal, rms=0.085152Jy sigma=0.870162 ! Inverting map ! Added new window around map position (-1.2, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00580382 Jy ! Component: 100 - total flux cleaned = 0.00921939 Jy ! Total flux subtracted in 100 components = 0.00921939 Jy ! Clean residual min=-0.003947 max=0.004761 Jy/beam ! Clean residual mean=-0.000002 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.123137 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 39 components and 0.123137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084663Jy sigma=0.860008 ! Fit after self-cal, rms=0.084622Jy sigma=0.859079 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7905 mas, bmaj=2.249 mas, bpa=-9.76 degrees ! Estimated noise=0.328327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054446 Jy ! Component: 100 - total flux cleaned = 0.00874507 Jy ! Component: 150 - total flux cleaned = 0.0108677 Jy ! Component: 200 - total flux cleaned = 0.012258 Jy ! Total flux subtracted in 200 components = 0.012258 Jy ! Clean residual min=-0.003967 max=0.004267 Jy/beam ! Clean residual mean=-0.000003 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.135395 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 0.135395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084320Jy sigma=0.852466 ! Fit after self-cal, rms=0.084300Jy sigma=0.851979 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7905 x 2.249 at -9.76 degrees (North through East) ! Clean map min=-0.0036374 max=0.084758 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.96 HN 1.24 KP 1.06 ! LA 1.11 MK 1.10 NL 1.19 PT 0.99 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 HN 1.26 KP 0.92 ! MK 0.85 NL 0.93 OV 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 KP 0.90 LA 0.92 MK 0.89 ! NL 1.20 OV 1.02 PT 1.04 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.96 HN 1.29 KP 1.00 MK 1.31 ! NL 1.12 OV 0.94 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.94 HN 1.42 KP 1.08 ! LA 1.16 MK 1.11 NL 1.27 PT 0.90 ! SC 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.99 HN 1.58 KP 0.93 ! MK 0.93 NL 0.88 OV 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 KP 0.86 LA 1.00 MK 0.93 ! NL 1.09 OV 0.98 PT 0.97 SC 1.10 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 HN 1.39 KP 1.00 MK 1.13 ! NL 1.04 OV 0.95 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.96 HN 0.99 KP 1.08 ! LA 1.18 MK 1.09 NL 1.25 PT 0.95 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.96 HN 1.41 KP 0.88 ! MK 0.96 NL 0.98 OV 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 KP 0.87 LA 1.01 MK 0.97 ! NL 1.06 OV 1.00 PT 1.05 SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 HN 1.36 KP 1.02 MK 1.18 ! NL 1.11 OV 0.97 SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.95 HN 1.20 KP 1.12 ! LA 1.07 MK 1.03 NL 1.43 PT 1.03 ! SC 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00 HN 1.35 KP 0.87 ! MK 0.90 NL 1.01 OV 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.87 KP 0.95 LA 0.95 MK 0.90 ! NL 1.23 OV 0.94 PT 1.00 SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 HN 1.24 KP 0.97 MK 1.17 ! NL 1.11 OV 0.95 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 1.32 KP 1.07 ! LA 1.12 MK 1.02 NL 1.19 PT 0.96 ! SC 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.94 HN 1.39 KP 0.87 ! MK 1.02 NL 0.92 OV 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 KP 0.92 LA 0.96 MK 0.91 ! NL 1.19 OV 1.01 PT 1.02 SC 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.93 HN 1.18 KP 1.07 MK 1.22 ! NL 1.07 OV 0.94 SC 1.06 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.90 HN 1.26 KP 1.03 ! LA 1.19 MK 1.14 NL 1.22 PT 0.99 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.95 HN 1.44 KP 0.89 ! MK 0.95 NL 0.97 OV 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.84 KP 0.88 LA 0.99 MK 0.94 ! NL 1.19 OV 0.98 PT 1.00 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 HN 1.17 KP 0.99 MK 1.20 ! NL 1.01 OV 0.99 SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 1.25 KP 1.03 ! LA 1.07 MK 1.08 NL 1.30 PT 0.94 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 HN 1.19 KP 0.88 ! MK 0.87 NL 0.96 OV 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.88 KP 0.92 LA 0.97 MK 0.90 ! NL 1.24 OV 0.97 PT 1.04 SC 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.05 HN 1.17 KP 1.05 MK 1.04 ! NL 1.02 OV 0.89 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.93 HN 1.28 KP 1.07 ! LA 1.08 MK 1.14 NL 1.20 PT 0.98 ! SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.93 HN 1.45 KP 0.91 ! MK 0.95 NL 0.91 OV 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 KP 0.91 LA 0.96 MK 0.89 ! NL 1.16 OV 0.98 PT 1.02 SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.96 HN 1.28 KP 1.01 MK 1.04 ! NL 1.05 OV 0.99 SC 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.88 HN 1.21 KP 1.12 ! LA 1.04 MK 0.96 NL 1.19 PT 0.94 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.96 HN 1.29 KP 0.86 ! MK 0.90 NL 0.86 OV 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 KP 0.94 LA 0.97 MK 0.95 ! NL 1.18 OV 0.93 PT 1.02 SC 1.07 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.93 HN 1.28 KP 1.02 MK 0.97 ! NL 1.03 OV 0.96 SC 0.91 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.91 HN 0.98 KP 0.99 ! LA 1.08 MK 0.93 NL 1.28 PT 0.95 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.97 HN 1.52 KP 0.88 ! MK 0.94 NL 0.91 OV 0.86 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 KP 0.89 LA 1.00 MK 0.92 ! NL 1.10 OV 1.00 PT 0.99 SC 1.07 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 HN 1.17 KP 0.97 MK 0.97 ! NL 0.98 OV 0.99 SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.90 HN 1.30 KP 1.01 ! LA 1.08 MK 1.05 NL 1.32 PT 1.04 ! SC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.90 HN 1.28 KP 0.94 ! MK 0.95 NL 0.98 OV 0.85 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.83 KP 0.91 LA 0.93 MK 0.91 ! NL 1.26 OV 0.97 PT 1.04 SC 1.05 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.94 HN 1.22 KP 1.04 MK 1.08 ! NL 0.97 OV 0.96 SC 0.91 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.96 HN 1.03 KP 1.06 ! LA 1.06 MK 1.02 NL 1.14 PT 0.94 ! SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.96 HN 1.19 KP 0.86 ! MK 0.93 NL 1.00 OV 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 KP 0.90 LA 0.95 MK 0.89 ! NL 1.35 OV 0.92 PT 1.00 SC 1.06 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.91 HN 1.13 KP 1.08 MK 0.92 ! NL 1.01 OV 0.88 SC 0.88 ! ! ! Fit before self-cal, rms=0.084300Jy sigma=0.851979 ! Fit after self-cal, rms=0.093424Jy sigma=0.834183 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7965 mas, bmaj=2.251 mas, bpa=-9.424 degrees ! Estimated noise=0.333365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.6, -35.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293003 Jy ! Component: 100 - total flux cleaned = 0.0039852 Jy ! Component: 150 - total flux cleaned = 0.00428169 Jy ! Component: 200 - total flux cleaned = 0.00452644 Jy ! Total flux subtracted in 200 components = 0.00452644 Jy ! Clean residual min=-0.002465 max=0.002259 Jy/beam ! Clean residual mean=-0.000003 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.139922 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 86 components and 0.139922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093301Jy sigma=0.832266 ! Fit after self-cal, rms=0.093580Jy sigma=0.831619 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093580Jy sigma=0.831619 ! Fit after self-cal, rms=0.094341Jy sigma=0.830522 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7974 mas, bmaj=2.251 mas, bpa=-9.447 degrees ! Estimated noise=0.333877 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000959888 Jy ! Component: 100 - total flux cleaned = 0.00126426 Jy ! Component: 150 - total flux cleaned = 0.00142881 Jy ! Component: 200 - total flux cleaned = 0.00153477 Jy ! Total flux subtracted in 200 components = 0.00153477 Jy ! Clean residual min=-0.002261 max=0.002007 Jy/beam ! Clean residual mean=-0.000004 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.141456 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 91 components and 0.141456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094288Jy sigma=0.829799 ! Fit after self-cal, rms=0.094328Jy sigma=0.829639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360864 Jy ! Component: 100 - total flux cleaned = 0.000428224 Jy ! Component: 150 - total flux cleaned = 0.000427873 Jy ! Component: 200 - total flux cleaned = 0.000482894 Jy ! Total flux subtracted in 200 components = 0.000482894 Jy ! Clean residual min=-0.002238 max=0.001973 Jy/beam ! Clean residual mean=-0.000003 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.141939 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 98 components and 0.141939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094307Jy sigma=0.829354 ! Fit after self-cal, rms=0.094310Jy sigma=0.829333 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094310Jy sigma=0.829333 ! Fit after self-cal, rms=0.095733Jy sigma=0.827321 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7976 mas, bmaj=2.252 mas, bpa=-9.519 degrees ! Estimated noise=0.333432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159707 Jy ! Component: 100 - total flux cleaned = 0.000450396 Jy ! Component: 150 - total flux cleaned = 0.000608327 Jy ! Component: 200 - total flux cleaned = 0.000676663 Jy ! Total flux subtracted in 200 components = 0.000676663 Jy ! Clean residual min=-0.001844 max=0.001757 Jy/beam ! Clean residual mean=-0.000003 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.142616 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 105 components and 0.142616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095709Jy sigma=0.826995 ! Fit after self-cal, rms=0.095861Jy sigma=0.826787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.12296e-05 Jy ! Component: 100 - total flux cleaned = 0.000134058 Jy ! Component: 150 - total flux cleaned = 0.00017102 Jy ! Component: 200 - total flux cleaned = 0.000171555 Jy ! Total flux subtracted in 200 components = 0.000171555 Jy ! Clean residual min=-0.001867 max=0.001724 Jy/beam ! Clean residual mean=-0.000003 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.142788 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 112 components and 0.142788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095853Jy sigma=0.826677 ! Fit after self-cal, rms=0.095855Jy sigma=0.826662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095855Jy sigma=0.826662 ! Fit after self-cal, rms=0.096566Jy sigma=0.826539 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.153 mas, bmaj=6.067 mas, bpa=-3.634 degrees ! Estimated noise=0.408826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000389755 Jy ! Component: 100 - total flux cleaned = 0.000469504 Jy ! Component: 150 - total flux cleaned = 0.000532356 Jy ! Component: 200 - total flux cleaned = 0.000569178 Jy ! Total flux subtracted in 200 components = 0.000569178 Jy ! Clean residual min=-0.002519 max=0.002987 Jy/beam ! Clean residual mean=-0.000007 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.143357 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 118 components and 0.143357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096562Jy sigma=0.826455 ! Fit after self-cal, rms=0.096596Jy sigma=0.826402 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.73463e-05 Jy ! Component: 100 - total flux cleaned = 0.000115325 Jy ! Component: 150 - total flux cleaned = 0.000130968 Jy ! Component: 200 - total flux cleaned = 0.00013076 Jy ! Total flux subtracted in 200 components = 0.00013076 Jy ! Clean residual min=-0.002484 max=0.002941 Jy/beam ! Clean residual mean=-0.000007 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.143488 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 120 components and 0.143488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096598Jy sigma=0.826440 ! Fit after self-cal, rms=0.096592Jy sigma=0.826426 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7971 mas, bmaj=2.25 mas, bpa=-9.57 degrees ! Estimated noise=0.332918 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7971 x 2.25 at -9.57 degrees (North through East) ! Clean map min=-0.0016288 max=0.085891 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.601 mas, bmaj=1.77 mas, bpa=-7.464 degrees ! Estimated noise=0.700996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.06914 Jy ! Component: 100 - total flux cleaned = 0.089917 Jy ! Component: 150 - total flux cleaned = 0.100652 Jy ! Component: 200 - total flux cleaned = 0.107669 Jy ! Total flux subtracted in 200 components = 0.107669 Jy ! Clean residual min=-0.003359 max=0.004488 Jy/beam ! Clean residual mean=-0.000002 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.107669 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.107669 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7971 mas, bmaj=2.25 mas, bpa=-9.57 degrees ! Estimated noise=0.332918 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00907167 Jy ! Component: 100 - total flux cleaned = 0.0146996 Jy ! Component: 150 - total flux cleaned = 0.0189582 Jy ! Component: 200 - total flux cleaned = 0.0222671 Jy ! Total flux subtracted in 200 components = 0.0222671 Jy ! Clean residual min=-0.002463 max=0.002386 Jy/beam ! Clean residual mean=-0.000006 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.129936 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 73 components and 0.129936 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.153 mas, bmaj=6.067 mas, bpa=-3.634 degrees ! Estimated noise=0.408826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482224 Jy ! Component: 100 - total flux cleaned = 0.00779761 Jy ! Component: 150 - total flux cleaned = 0.00974187 Jy ! Component: 200 - total flux cleaned = 0.0110606 Jy ! Total flux subtracted in 200 components = 0.0110606 Jy ! Clean residual min=-0.002491 max=0.002827 Jy/beam ! Clean residual mean=-0.000009 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.140997 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00091325 Jy ! Component: 100 - total flux cleaned = 0.00155079 Jy ! Component: 150 - total flux cleaned = 0.00199707 Jy ! Component: 200 - total flux cleaned = 0.00212184 Jy ! Total flux subtracted in 200 components = 0.00212184 Jy ! Clean residual min=-0.002455 max=0.002894 Jy/beam ! Clean residual mean=-0.000008 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.143119 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 121 components and 0.143119 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7971 mas, bmaj=2.25 mas, bpa=-9.57 degrees ! Estimated noise=0.332918 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000785269 Jy ! Component: 100 - total flux cleaned = -0.000787628 Jy ! Component: 150 - total flux cleaned = -0.00081783 Jy ! Component: 200 - total flux cleaned = -0.000788917 Jy ! Total flux subtracted in 200 components = -0.000788917 Jy ! Clean residual min=-0.001738 max=0.001733 Jy/beam ! Clean residual mean=-0.000003 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.14233 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 143 components and 0.14233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096604Jy sigma=0.826571 ! Fit after self-cal, rms=0.096587Jy sigma=0.826477 wmodel J1616-3509_X_map.mod ! Writing 143 model components to file: J1616-3509_X_map.mod wobs J1616-3509_X_uvs.fits ! Writing UV FITS file: J1616-3509_X_uvs.fits wwins J1616-3509_X_map.win ! wwins: Wrote 5 windows to J1616-3509_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.79313e-05 Jy ! Component: 100 - total flux cleaned = 9.75166e-05 Jy ! Component: 150 - total flux cleaned = 0.000235341 Jy ! Component: 200 - total flux cleaned = 0.000341063 Jy ! Component: 250 - total flux cleaned = 0.000391603 Jy ! Component: 300 - total flux cleaned = 0.000366668 Jy ! Component: 350 - total flux cleaned = 0.000318695 Jy ! Component: 400 - total flux cleaned = 0.000225651 Jy ! Component: 450 - total flux cleaned = 0.000180073 Jy ! Component: 500 - total flux cleaned = 0.000114093 Jy ! Component: 550 - total flux cleaned = 0.000114211 Jy ! Component: 600 - total flux cleaned = 0.000135222 Jy ! Component: 650 - total flux cleaned = 0.000114814 Jy ! Component: 700 - total flux cleaned = 0.000175628 Jy ! Component: 750 - total flux cleaned = 0.000175851 Jy ! Component: 800 - total flux cleaned = 0.000234337 Jy ! Component: 850 - total flux cleaned = 0.000291328 Jy ! Component: 900 - total flux cleaned = 0.000310288 Jy ! Component: 950 - total flux cleaned = 0.000347303 Jy ! Component: 1000 - total flux cleaned = 0.000438605 Jy ! Component: 1050 - total flux cleaned = 0.000474633 Jy ! Component: 1100 - total flux cleaned = 0.000563377 Jy ! Component: 1150 - total flux cleaned = 0.000633367 Jy ! Component: 1200 - total flux cleaned = 0.000684962 Jy ! Component: 1250 - total flux cleaned = 0.000786851 Jy ! Component: 1300 - total flux cleaned = 0.000820199 Jy ! Component: 1350 - total flux cleaned = 0.000836689 Jy ! Component: 1400 - total flux cleaned = 0.000820699 Jy ! Component: 1450 - total flux cleaned = 0.000917536 Jy ! Component: 1500 - total flux cleaned = 0.000997184 Jy ! Component: 1550 - total flux cleaned = 0.000997369 Jy ! Component: 1600 - total flux cleaned = 0.00107549 Jy ! Component: 1650 - total flux cleaned = 0.00115205 Jy ! Component: 1700 - total flux cleaned = 0.0011674 Jy ! Component: 1750 - total flux cleaned = 0.00121259 Jy ! Component: 1800 - total flux cleaned = 0.00127239 Jy ! Component: 1850 - total flux cleaned = 0.0013316 Jy ! Component: 1900 - total flux cleaned = 0.00141901 Jy ! Component: 1950 - total flux cleaned = 0.00149106 Jy ! Component: 2000 - total flux cleaned = 0.00157644 Jy ! Component: 2050 - total flux cleaned = 0.0016329 Jy ! Component: 2100 - total flux cleaned = 0.00171665 Jy ! Component: 2150 - total flux cleaned = 0.0018412 Jy ! Component: 2200 - total flux cleaned = 0.00184121 Jy ! Component: 2250 - total flux cleaned = 0.00193635 Jy ! Component: 2300 - total flux cleaned = 0.00203041 Jy ! Component: 2350 - total flux cleaned = 0.00207042 Jy ! Component: 2400 - total flux cleaned = 0.00214974 Jy ! Component: 2450 - total flux cleaned = 0.00225452 Jy ! Component: 2500 - total flux cleaned = 0.00229354 Jy ! Component: 2550 - total flux cleaned = 0.00237083 Jy ! Component: 2600 - total flux cleaned = 0.00247312 Jy ! Component: 2650 - total flux cleaned = 0.00253651 Jy ! Component: 2700 - total flux cleaned = 0.00267483 Jy ! Component: 2750 - total flux cleaned = 0.00273732 Jy ! Component: 2800 - total flux cleaned = 0.00278696 Jy ! Component: 2850 - total flux cleaned = 0.00284834 Jy ! Component: 2900 - total flux cleaned = 0.00297026 Jy ! Component: 2950 - total flux cleaned = 0.00303066 Jy ! Component: 3000 - total flux cleaned = 0.00311463 Jy ! Component: 3050 - total flux cleaned = 0.00312647 Jy ! Component: 3100 - total flux cleaned = 0.00319765 Jy ! Component: 3150 - total flux cleaned = 0.00325637 Jy ! Component: 3200 - total flux cleaned = 0.00332638 Jy ! Component: 3250 - total flux cleaned = 0.00338437 Jy ! Component: 3300 - total flux cleaned = 0.00339576 Jy ! Component: 3350 - total flux cleaned = 0.00342994 Jy ! Component: 3400 - total flux cleaned = 0.00348668 Jy ! Component: 3450 - total flux cleaned = 0.00352051 Jy ! Component: 3500 - total flux cleaned = 0.00352052 Jy ! Component: 3550 - total flux cleaned = 0.00357626 Jy ! Component: 3600 - total flux cleaned = 0.00364255 Jy ! Component: 3650 - total flux cleaned = 0.0036865 Jy ! Component: 3700 - total flux cleaned = 0.00376292 Jy ! Component: 3750 - total flux cleaned = 0.00373039 Jy ! Component: 3800 - total flux cleaned = 0.00378443 Jy ! Component: 3850 - total flux cleaned = 0.00381672 Jy ! Component: 3900 - total flux cleaned = 0.00388075 Jy ! Component: 3950 - total flux cleaned = 0.0038913 Jy ! Component: 4000 - total flux cleaned = 0.00393355 Jy ! Component: 4050 - total flux cleaned = 0.00396496 Jy ! Total flux subtracted in 4096 components = 0.00400668 Jy ! Clean residual min=-0.000569 max=0.000617 Jy/beam ! Clean residual mean=-0.000001 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.146337 Jy keep ! Adding 345 model components to the UV plane model. ! The established model now contains 488 components and 0.146337 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1616-3509_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7971 x 2.25 at -9.57 degrees (North through East) ! Clean map min=-0.001128 max=0.086268 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1616-3509_X_map.fits wmodel /vlbi/bp222/temp_maps//J1616-3509_X_map.mod ! Writing 488 model components to file: /vlbi/bp222/temp_maps//J1616-3509_X_map.mod wobs /vlbi/bp222/temp_maps//J1616-3509_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1616-3509_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1616-3509_X_map.win ! wwins: Wrote 6 windows to /vlbi/bp222/temp_maps//J1616-3509_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.086268 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000181264 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.630354 0.630354 1.26071 2.52141 5.04283 10.0857 20.1713 40.3426 80.6853 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.086 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 475.923 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1616-3509_X_dfm.log closed on Thu Feb 14 23:02:55 2019