! Started logfile: J1614-3543_S_dfm.log on Fri Feb 15 19:56:02 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J1614-3543_S_uvm.fits
! Reading UV FITS file: J1614-3543_S_uvm.fits
! AN table 1: 68 integrations on 28 of 28 possible baselines.
! AN table 2: 24 integrations on 21 of 21 possible baselines.
! AN table 3: 24 integrations on 21 of 21 possible baselines.
! AN table 4: 21 integrations on 6 of 6 possible baselines.
! AN table 5: 89 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.742968 visibilities/baseline/integration-bin.
! Found source: J1614-3543
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 12996 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1614-3543_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
!  A total of 200 telescope corrections were flagged in sub-array 5.
! 
! Correcting IF 2.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
!  A total of 200 telescope corrections were flagged in sub-array 5.
! 
! Correcting IF 3.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
!  A total of 200 telescope corrections were flagged in sub-array 5.
! 
! Correcting IF 4.
!  A total of 544 telescope corrections were flagged in sub-array 1.
!  A total of 168 telescope corrections were flagged in sub-array 2.
!  A total of 168 telescope corrections were flagged in sub-array 3.
!  A total of 84 telescope corrections were flagged in sub-array 4.
!  A total of 534 telescope corrections were flagged in sub-array 5.
! 
! Fit before self-cal, rms=1.008345Jy  sigma=10.010790
! Fit after  self-cal, rms=0.925924Jy  sigma=9.134738
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.675 mas, bmaj=8.425 mas, bpa=-8.44 degrees
! Estimated noise=1.29465 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0590162 Jy
! Component: 100  -  total flux cleaned = 0.0723384 Jy
! Total flux subtracted in 100 components = 0.0723384 Jy
! Clean residual min=-0.005094 max=0.005276 Jy/beam
! Clean residual mean=-0.000013 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.0723384 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0723384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.095952Jy  sigma=0.760475
! Fit after  self-cal, rms=0.095082Jy  sigma=0.752907
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.374 mas, bmaj=10.69 mas, bpa=-12.89 degrees
! Estimated noise=0.781442 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00893395 Jy
! Component: 100  -  total flux cleaned = 0.0133893 Jy
! Component: 150  -  total flux cleaned = 0.0157269 Jy
! Component: 200  -  total flux cleaned = 0.0169572 Jy
! Total flux subtracted in 200 components = 0.0169572 Jy
! Clean residual min=-0.002812 max=0.003998 Jy/beam
! Clean residual mean=-0.000047 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.0892956 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 39 components and 0.0892956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.094329Jy  sigma=0.742923
! Fit after  self-cal, rms=0.094243Jy  sigma=0.742564
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.374 x 10.69 at -12.89 degrees (North through East)
! Clean map  min=-0.0027378  max=0.077592 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.04     KP        0.99     LA        0.98     
!   NL        1.09     OV        0.97     PT        0.97     SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.05     KP        1.03     LA        0.98     MK        0.93     
!   NL        1.14     PT        1.01     SC        1.06     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.00     KP        0.97     LA        0.97     MK        1.04     
!   OV        0.96     PT        0.96     SC        1.08     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.86     HN        0.80     KP        1.37     OV        1.13     
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.00     FD        1.10     KP        0.99     MK        1.06     
!   NL        1.12     OV        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        0.99     KP        1.01     LA        0.82     
!   NL        1.13     OV        1.12     PT        1.01     SC        0.92     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.02     KP        0.88     LA        0.79     MK        0.93     
!   NL        1.21     PT        1.01     SC        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.01     KP        0.90     LA        0.79     MK        0.96     
!   OV        1.01     PT        1.09     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        1.01     HN        0.78     KP        1.19     OV        1.02     
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        0.51     FD        1.11     KP        1.06     MK        1.07     
!   NL        1.24     OV        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.12     KP        0.87     LA        0.84     
!   NL        0.99     OV        1.03     PT        1.02     SC        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.06     KP        0.96     LA        0.86     MK        0.97     
!   NL        1.16     PT        0.97     SC        1.09     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.99     KP        0.91     LA        0.84     MK        1.11     
!   OV        0.99     PT        1.00     SC        1.06     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        1.01     HN        0.98     KP        1.13     OV        0.92     
! 
!  Telescope amplitude corrections in sub-array 5:
!   BR        0.60     FD        1.12     KP        1.10     MK        1.16     
!   NL        0.89     OV        0.92     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.094243Jy  sigma=0.742564
! Fit after  self-cal, rms=0.090100Jy  sigma=0.734597
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.408 mas, bmaj=10.73 mas, bpa=-12.66 degrees
! Estimated noise=0.781797 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00026706 Jy
! Component: 100  -  total flux cleaned = -0.000282103 Jy
! Component: 150  -  total flux cleaned = -0.00028215 Jy
! Component: 200  -  total flux cleaned = -0.000295654 Jy
! Total flux subtracted in 200 components = -0.000295654 Jy
! Clean residual min=-0.002371 max=0.002654 Jy/beam
! Clean residual mean=-0.000013 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.089 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 48 components and 0.089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.090096Jy  sigma=0.734552
! Fit after  self-cal, rms=0.090190Jy  sigma=0.734001
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.090190Jy  sigma=0.734001
! Fit after  self-cal, rms=0.090613Jy  sigma=0.733397
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.417 mas, bmaj=10.74 mas, bpa=-12.64 degrees
! Estimated noise=0.783278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000166907 Jy
! Component: 100  -  total flux cleaned = -0.000195141 Jy
! Component: 150  -  total flux cleaned = -0.000207921 Jy
! Component: 200  -  total flux cleaned = -0.000207851 Jy
! Total flux subtracted in 200 components = -0.000207851 Jy
! Clean residual min=-0.002274 max=0.002672 Jy/beam
! Clean residual mean=-0.000012 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.0887921 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 54 components and 0.0887921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.090611Jy  sigma=0.733350
! Fit after  self-cal, rms=0.090635Jy  sigma=0.733324
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-14.5, 83.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159303 Jy
! Component: 100  -  total flux cleaned = 0.00153837 Jy
! Component: 150  -  total flux cleaned = 0.00149891 Jy
! Component: 200  -  total flux cleaned = 0.00143216 Jy
! Total flux subtracted in 200 components = 0.00143216 Jy
! Clean residual min=-0.002237 max=0.002390 Jy/beam
! Clean residual mean=-0.000010 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.0902243 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 72 components and 0.0902243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.090551Jy  sigma=0.732670
! Fit after  self-cal, rms=0.090593Jy  sigma=0.732540
! Inverting map 
! Added new window around map position (-107.5, -65.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00226001 Jy
! Component: 100  -  total flux cleaned = 0.00329763 Jy
! Component: 150  -  total flux cleaned = 0.00372573 Jy
! Component: 200  -  total flux cleaned = 0.00384042 Jy
! Total flux subtracted in 200 components = 0.00384042 Jy
! Clean residual min=-0.002042 max=0.002104 Jy/beam
! Clean residual mean=-0.000007 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.0940647 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 100 components and 0.0940647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.090514Jy  sigma=0.731822
! Fit after  self-cal, rms=0.090534Jy  sigma=0.731679
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.090534Jy  sigma=0.731679
! Fit after  self-cal, rms=0.091218Jy  sigma=0.730216
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.42 mas, bmaj=10.71 mas, bpa=-12.66 degrees
! Estimated noise=0.782571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132852 Jy
! Component: 100  -  total flux cleaned = 0.00149474 Jy
! Component: 150  -  total flux cleaned = 0.00156888 Jy
! Component: 200  -  total flux cleaned = 0.00160404 Jy
! Total flux subtracted in 200 components = 0.00160404 Jy
! Clean residual min=-0.002035 max=0.002028 Jy/beam
! Clean residual mean=-0.000004 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.0956687 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 118 components and 0.0956687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.091179Jy  sigma=0.729888
! Fit after  self-cal, rms=0.091361Jy  sigma=0.729686
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000564753 Jy
! Component: 100  -  total flux cleaned = 0.000630065 Jy
! Component: 150  -  total flux cleaned = 0.000692271 Jy
! Component: 200  -  total flux cleaned = 0.000751611 Jy
! Total flux subtracted in 200 components = 0.000751611 Jy
! Clean residual min=-0.002011 max=0.001966 Jy/beam
! Clean residual mean=-0.000004 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.0964203 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 123 components and 0.0964203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.091336Jy  sigma=0.729496
! Fit after  self-cal, rms=0.091357Jy  sigma=0.729483
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.091357Jy  sigma=0.729483
! Fit after  self-cal, rms=0.091801Jy  sigma=0.729411
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.123 mas, bmaj=26.4 mas, bpa=-10.47 degrees
! Estimated noise=0.933928 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000993941 Jy
! Component: 100  -  total flux cleaned = 0.001326 Jy
! Component: 150  -  total flux cleaned = 0.00142221 Jy
! Component: 200  -  total flux cleaned = 0.00148942 Jy
! Total flux subtracted in 200 components = 0.00148942 Jy
! Clean residual min=-0.001890 max=0.002014 Jy/beam
! Clean residual mean=-0.000006 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.0979098 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 140 components and 0.0979098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.091784Jy  sigma=0.729341
! Fit after  self-cal, rms=0.091840Jy  sigma=0.729307
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000471729 Jy
! Component: 100  -  total flux cleaned = 0.000536923 Jy
! Component: 150  -  total flux cleaned = 0.000556858 Jy
! Component: 200  -  total flux cleaned = 0.000577097 Jy
! Total flux subtracted in 200 components = 0.000577097 Jy
! Clean residual min=-0.001886 max=0.001953 Jy/beam
! Clean residual mean=-0.000005 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.0984869 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 147 components and 0.0984869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.091830Jy  sigma=0.729271
! Fit after  self-cal, rms=0.091840Jy  sigma=0.729264
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.418 mas, bmaj=10.69 mas, bpa=-12.67 degrees
! Estimated noise=0.7836 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.418 x 10.69 at -12.67 degrees (North through East)
! Clean map  min=-0.0022962  max=0.077426 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.697 mas, bmaj=8.406 mas, bpa=-8.192 degrees
! Estimated noise=1.30796 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0599224 Jy
! Component: 100  -  total flux cleaned = 0.0735448 Jy
! Component: 150  -  total flux cleaned = 0.0791749 Jy
! Component: 200  -  total flux cleaned = 0.0823617 Jy
! Total flux subtracted in 200 components = 0.0823617 Jy
! Clean residual min=-0.003574 max=0.003955 Jy/beam
! Clean residual mean=-0.000001 rms=0.000946 Jy/beam
! Combined flux in latest and established models = 0.0823618 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0823618 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.418 mas, bmaj=10.69 mas, bpa=-12.67 degrees
! Estimated noise=0.7836 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00509783 Jy
! Component: 100  -  total flux cleaned = 0.00812655 Jy
! Component: 150  -  total flux cleaned = 0.0102126 Jy
! Component: 200  -  total flux cleaned = 0.0111138 Jy
! Total flux subtracted in 200 components = 0.0111138 Jy
! Clean residual min=-0.002476 max=0.002394 Jy/beam
! Clean residual mean=-0.000008 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.0934756 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 54 components and 0.0934756 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.123 mas, bmaj=26.4 mas, bpa=-10.47 degrees
! Estimated noise=0.933928 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211 Jy
! Component: 100  -  total flux cleaned = 0.00315101 Jy
! Component: 150  -  total flux cleaned = 0.00349028 Jy
! Component: 200  -  total flux cleaned = 0.00378993 Jy
! Total flux subtracted in 200 components = 0.00378993 Jy
! Clean residual min=-0.002068 max=0.002106 Jy/beam
! Clean residual mean=-0.000009 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.0972655 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202431 Jy
! Component: 100  -  total flux cleaned = 0.000325075 Jy
! Component: 150  -  total flux cleaned = 0.000439292 Jy
! Component: 200  -  total flux cleaned = 0.000518915 Jy
! Total flux subtracted in 200 components = 0.000518915 Jy
! Clean residual min=-0.001986 max=0.002034 Jy/beam
! Clean residual mean=-0.000008 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.0977844 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 88 components and 0.0977844 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.418 mas, bmaj=10.69 mas, bpa=-12.67 degrees
! Estimated noise=0.7836 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000655762 Jy
! Component: 100  -  total flux cleaned = -0.000748862 Jy
! Component: 150  -  total flux cleaned = -0.000666986 Jy
! Component: 200  -  total flux cleaned = -0.000551978 Jy
! Total flux subtracted in 200 components = -0.000551978 Jy
! Clean residual min=-0.002106 max=0.001994 Jy/beam
! Clean residual mean=-0.000006 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.0972324 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 109 components and 0.0972324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.091877Jy  sigma=0.729545
! Fit after  self-cal, rms=0.091871Jy  sigma=0.729491
wmodel J1614-3543_S_map.mod
! Writing 109 model components to file: J1614-3543_S_map.mod
wobs   J1614-3543_S_uvs.fits
! Writing UV FITS file: J1614-3543_S_uvs.fits
wwins  J1614-3543_S_map.win
! wwins: Wrote 3 windows to J1614-3543_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -5.21644e-05 Jy
! Component: 100  -  total flux cleaned = 1.6953e-05 Jy
! Component: 150  -  total flux cleaned = 0.000203508 Jy
! Component: 200  -  total flux cleaned = 0.000443289 Jy
! Component: 250  -  total flux cleaned = 0.00064595 Jy
! Component: 300  -  total flux cleaned = 0.0007311 Jy
! Component: 350  -  total flux cleaned = 0.000839918 Jy
! Component: 400  -  total flux cleaned = 0.000997175 Jy
! Component: 450  -  total flux cleaned = 0.00112501 Jy
! Component: 500  -  total flux cleaned = 0.00125023 Jy
! Component: 550  -  total flux cleaned = 0.00132384 Jy
! Component: 600  -  total flux cleaned = 0.00134793 Jy
! Component: 650  -  total flux cleaned = 0.00137163 Jy
! Component: 700  -  total flux cleaned = 0.00144158 Jy
! Component: 750  -  total flux cleaned = 0.00144135 Jy
! Component: 800  -  total flux cleaned = 0.00157614 Jy
! Component: 850  -  total flux cleaned = 0.00157642 Jy
! Component: 900  -  total flux cleaned = 0.00159878 Jy
! Component: 950  -  total flux cleaned = 0.00162081 Jy
! Component: 1000  -  total flux cleaned = 0.00166357 Jy
! Component: 1050  -  total flux cleaned = 0.00155891 Jy
! Component: 1100  -  total flux cleaned = 0.00151764 Jy
! Component: 1150  -  total flux cleaned = 0.00147676 Jy
! Component: 1200  -  total flux cleaned = 0.00139588 Jy
! Component: 1250  -  total flux cleaned = 0.00137569 Jy
! Component: 1300  -  total flux cleaned = 0.00129683 Jy
! Component: 1350  -  total flux cleaned = 0.00129682 Jy
! Component: 1400  -  total flux cleaned = 0.00125846 Jy
! Component: 1450  -  total flux cleaned = 0.00120132 Jy
! Component: 1500  -  total flux cleaned = 0.00114493 Jy
! Component: 1550  -  total flux cleaned = 0.00120104 Jy
! Component: 1600  -  total flux cleaned = 0.0011457 Jy
! Component: 1650  -  total flux cleaned = 0.0010726 Jy
! Component: 1700  -  total flux cleaned = 0.00110865 Jy
! Component: 1750  -  total flux cleaned = 0.00107274 Jy
! Component: 1800  -  total flux cleaned = 0.00105483 Jy
! Component: 1850  -  total flux cleaned = 0.000984458 Jy
! Component: 1900  -  total flux cleaned = 0.000914751 Jy
! Component: 1950  -  total flux cleaned = 0.000862904 Jy
! Component: 2000  -  total flux cleaned = 0.000828297 Jy
! Component: 2050  -  total flux cleaned = 0.000743429 Jy
! Component: 2100  -  total flux cleaned = 0.000726749 Jy
! Component: 2150  -  total flux cleaned = 0.000726614 Jy
! Component: 2200  -  total flux cleaned = 0.000693321 Jy
! Component: 2250  -  total flux cleaned = 0.000643911 Jy
! Component: 2300  -  total flux cleaned = 0.00059508 Jy
! Component: 2350  -  total flux cleaned = 0.000530495 Jy
! Component: 2400  -  total flux cleaned = 0.000418416 Jy
! Component: 2450  -  total flux cleaned = 0.000355059 Jy
! Component: 2500  -  total flux cleaned = 0.000370836 Jy
! Component: 2550  -  total flux cleaned = 0.000339406 Jy
! Component: 2600  -  total flux cleaned = 0.000292812 Jy
! Component: 2650  -  total flux cleaned = 0.000231151 Jy
! Component: 2700  -  total flux cleaned = 0.000215826 Jy
! Component: 2750  -  total flux cleaned = 0.000215709 Jy
! Component: 2800  -  total flux cleaned = 0.000185388 Jy
! Component: 2850  -  total flux cleaned = 0.000125243 Jy
! Component: 2900  -  total flux cleaned = 0.000169931 Jy
! Component: 2950  -  total flux cleaned = 0.000154967 Jy
! Component: 3000  -  total flux cleaned = 0.000110873 Jy
! Component: 3050  -  total flux cleaned = 0.000125536 Jy
! Component: 3100  -  total flux cleaned = 9.64405e-05 Jy
! Component: 3150  -  total flux cleaned = 6.7617e-05 Jy
! Component: 3200  -  total flux cleaned = 8.20167e-05 Jy
! Component: 3250  -  total flux cleaned = 6.79424e-05 Jy
! Component: 3300  -  total flux cleaned = 9.63307e-05 Jy
! Component: 3350  -  total flux cleaned = 1.17741e-05 Jy
! Component: 3400  -  total flux cleaned = 2.58685e-05 Jy
! Component: 3450  -  total flux cleaned = 1.19623e-05 Jy
! Component: 3500  -  total flux cleaned = -1.94557e-06 Jy
! Component: 3550  -  total flux cleaned = 2.55509e-05 Jy
! Component: 3600  -  total flux cleaned = -1.84417e-06 Jy
! Component: 3650  -  total flux cleaned = -1.53199e-05 Jy
! Component: 3700  -  total flux cleaned = -4.24344e-05 Jy
! Component: 3750  -  total flux cleaned = -4.25044e-05 Jy
! Component: 3800  -  total flux cleaned = -8.25938e-05 Jy
! Component: 3850  -  total flux cleaned = -0.000148883 Jy
! Component: 3900  -  total flux cleaned = -0.000175128 Jy
! Component: 3950  -  total flux cleaned = -0.000175145 Jy
! Component: 4000  -  total flux cleaned = -0.00022737 Jy
! Component: 4050  -  total flux cleaned = -0.00018846 Jy
! Total flux subtracted in 4096 components = -0.00022724 Jy
! Clean residual min=-0.000719 max=0.000938 Jy/beam
! Clean residual mean=-0.000007 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.0970052 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 388 components and 0.0970052 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J1614-3543_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.418 x 10.69 at -12.67 degrees (North through East)
! Clean map  min=-0.0018115  max=0.076815 Jy/beam
! Writing clean map to FITS file: J1614-3543_S_map.fits
wmodel J1614-3543_S_map.mod
! Writing 388 model components to file: J1614-3543_S_map.mod
wobs   J1614-3543_S_uvs.fits
! Writing UV FITS file: J1614-3543_S_uvs.fits
wwins  J1614-3543_S_map.win
! wwins: Wrote 4 windows to J1614-3543_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0768152 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00024379 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.952118 0.952118 1.90424 3.80847 7.61695 15.2339 30.4678 60.9356
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.076 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  315.086 
quit
! Quitting program
! Log file J1614-3543_S_dfm.log closed on Fri Feb 15 19:56:07 2019