! Started logfile: /vlbi/bp222/temp_maps//J1535+4957_X_dfm.log on Thu Feb 14 23:00:47 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1535+4957_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1535+4957_X_uvm.fits ! AN table 1: 23 integrations on 28 of 28 possible baselines. ! AN table 2: 45 integrations on 36 of 36 possible baselines. ! AN table 3: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.959313 visibilities/baseline/integration-bin. ! Found source: J1535+4957 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 108 lines of history. ! ! Reading 50928 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1535+4957_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.023083Jy sigma=16.503262 ! Fit after self-cal, rms=0.803205Jy sigma=12.888431 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6599 mas, bmaj=1.316 mas, bpa=3.682 degrees ! Estimated noise=0.4392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.151267 Jy ! Component: 100 - total flux cleaned = 0.213623 Jy ! Total flux subtracted in 100 components = 0.213623 Jy ! Clean residual min=-0.007615 max=0.028240 Jy/beam ! Clean residual mean=0.000011 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.213623 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.213623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078528Jy sigma=1.224363 ! Fit after self-cal, rms=0.076252Jy sigma=1.194722 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0347555 Jy ! Component: 100 - total flux cleaned = 0.0506117 Jy ! Total flux subtracted in 100 components = 0.0506117 Jy ! Clean residual min=-0.004953 max=0.009302 Jy/beam ! Clean residual mean=0.000003 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.264235 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 9 components and 0.264235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058815Jy sigma=0.893973 ! Fit after self-cal, rms=0.058349Jy sigma=0.888217 ! Inverting map ! Added new window around map position (-0.8, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110849 Jy ! Component: 100 - total flux cleaned = 0.0153467 Jy ! Total flux subtracted in 100 components = 0.0153467 Jy ! Clean residual min=-0.004671 max=0.005027 Jy/beam ! Clean residual mean=0.000001 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.279582 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 15 components and 0.279582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056601Jy sigma=0.858551 ! Fit after self-cal, rms=0.056492Jy sigma=0.857469 ! Inverting map ! Added new window around map position (3.4, 3.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274373 Jy ! Component: 100 - total flux cleaned = 0.00474092 Jy ! Total flux subtracted in 100 components = 0.00474092 Jy ! Clean residual min=-0.004143 max=0.004087 Jy/beam ! Clean residual mean=0.000000 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.284323 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 18 components and 0.284323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056019Jy sigma=0.849956 ! Fit after self-cal, rms=0.055968Jy sigma=0.849485 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8638 mas, bmaj=1.637 mas, bpa=4.339 degrees ! Estimated noise=0.201291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000370258 Jy ! Component: 100 - total flux cleaned = 0.000459878 Jy ! Component: 150 - total flux cleaned = 0.000543136 Jy ! Component: 200 - total flux cleaned = 0.000470067 Jy ! Total flux subtracted in 200 components = 0.000470067 Jy ! Clean residual min=-0.002463 max=0.002545 Jy/beam ! Clean residual mean=-0.000001 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.284793 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.284793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055692Jy sigma=0.845343 ! Fit after self-cal, rms=0.055657Jy sigma=0.845013 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8638 x 1.637 at 4.339 degrees (North through East) ! Clean map min=-0.0020521 max=0.18789 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.04 KP 1.01 ! MK 1.00 NL 1.00 OV 1.00 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 KP 1.01 LA 0.97 ! MK 1.00 NL 0.91 OV 1.00 PT 1.04 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.02 HN 0.98 KP 1.00 ! LA 0.98 MK 1.01 NL 1.01 OV 1.00 ! PT 1.02 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.04 KP 1.02 ! MK 1.00 NL 1.02 OV 0.99 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.02 KP 1.03 LA 0.94 ! MK 1.02 NL 0.93 OV 1.00 PT 1.02 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.01 HN 1.00 KP 1.02 ! LA 0.98 MK 1.00 NL 1.00 OV 1.01 ! PT 1.01 SC 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.02 KP 1.01 ! MK 0.99 NL 1.01 OV 0.97 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 KP 1.02 LA 0.95 ! MK 1.00 NL 0.94 OV 1.01 PT 1.03 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.99 HN 0.96 KP 1.02 ! LA 0.99 MK 0.99 NL 1.02 OV 1.00 ! PT 1.03 SC 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.07 KP 1.00 ! MK 1.01 NL 1.02 OV 0.99 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 KP 1.02 LA 0.96 ! MK 1.01 NL 0.92 OV 1.02 PT 1.02 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.99 HN 0.98 KP 0.99 ! LA 0.98 MK 1.00 NL 1.00 OV 1.02 ! PT 1.02 SC 0.89 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.04 KP 1.02 ! MK 1.03 NL 1.00 OV 0.99 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 KP 1.03 LA 0.95 ! MK 1.00 NL 0.91 OV 1.02 PT 1.03 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.00 HN 0.99 KP 1.02 ! LA 0.98 MK 0.99 NL 1.02 OV 1.01 ! PT 1.02 SC 0.88 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.04 KP 0.99 ! MK 1.01 NL 1.02 OV 0.99 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.03 KP 1.01 LA 0.94 ! MK 0.99 NL 0.92 OV 1.00 PT 1.03 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.98 HN 0.99 KP 1.01 ! LA 0.99 MK 0.96 NL 1.02 OV 1.02 ! PT 1.02 SC 0.88 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.06 KP 1.01 ! MK 1.00 NL 1.02 OV 1.00 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.02 KP 1.04 LA 0.96 ! MK 1.02 NL 0.93 OV 1.01 PT 1.01 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.00 HN 0.99 KP 1.01 ! LA 0.98 MK 1.02 NL 1.01 OV 1.02 ! PT 1.02 SC 0.88 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.03 KP 1.00 ! MK 1.01 NL 1.03 OV 1.02 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 KP 1.02 LA 0.96 ! MK 0.97 NL 0.93 OV 1.01 PT 1.04 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00 HN 0.99 KP 1.02 ! LA 0.98 MK 1.03 NL 1.02 OV 1.01 ! PT 1.03 SC 0.84 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.02 KP 1.00 ! MK 1.03 NL 1.02 OV 1.00 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 KP 1.02 LA 0.96 ! MK 1.01 NL 0.93 OV 0.99 PT 1.04 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.01 HN 0.97 KP 1.01 ! LA 1.00 MK 0.99 NL 1.01 OV 1.01 ! PT 1.03 SC 0.86 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.06 KP 0.98 ! MK 0.99 NL 1.01 OV 0.99 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 KP 1.03 LA 0.96 ! MK 1.00 NL 0.91 OV 1.01 PT 1.03 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.99 HN 0.99 KP 1.02 ! LA 1.00 MK 1.00 NL 1.02 OV 1.01 ! PT 1.01 SC 0.83 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.01 KP 1.01 ! MK 0.99 NL 1.01 OV 0.99 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.03 KP 1.01 LA 0.95 ! MK 1.00 NL 0.92 OV 1.01 PT 1.04 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.99 HN 0.99 KP 1.01 ! LA 1.00 MK 1.02 NL 1.01 OV 1.00 ! PT 1.03 SC 0.83 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.02 KP 1.02 ! MK 0.98 NL 1.03 OV 1.00 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 KP 1.03 LA 0.96 ! MK 0.96 NL 0.91 OV 1.01 PT 1.04 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.01 HN 0.99 KP 1.00 ! LA 0.99 MK 1.02 NL 1.00 OV 1.02 ! PT 1.01 SC 0.85 ! ! ! Fit before self-cal, rms=0.055657Jy sigma=0.845013 ! Fit after self-cal, rms=0.053634Jy sigma=0.830234 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8544 mas, bmaj=1.614 mas, bpa=5.552 degrees ! Estimated noise=0.198424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000584459 Jy ! Component: 100 - total flux cleaned = 0.000871901 Jy ! Component: 150 - total flux cleaned = 0.000938116 Jy ! Component: 200 - total flux cleaned = 0.000941061 Jy ! Total flux subtracted in 200 components = 0.000941061 Jy ! Clean residual min=-0.001902 max=0.001547 Jy/beam ! Clean residual mean=-0.000001 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.285734 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.285734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053476Jy sigma=0.827410 ! Fit after self-cal, rms=0.053475Jy sigma=0.827080 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053475Jy sigma=0.827080 ! Fit after self-cal, rms=0.053183Jy sigma=0.826928 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8513 mas, bmaj=1.606 mas, bpa=5.916 degrees ! Estimated noise=0.197493 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0005085 Jy ! Component: 100 - total flux cleaned = 0.000626432 Jy ! Component: 150 - total flux cleaned = 0.000625863 Jy ! Component: 200 - total flux cleaned = 0.000624886 Jy ! Total flux subtracted in 200 components = 0.000624886 Jy ! Clean residual min=-0.001652 max=0.001421 Jy/beam ! Clean residual mean=-0.000001 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.286359 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.286359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053076Jy sigma=0.824863 ! Fit after self-cal, rms=0.053058Jy sigma=0.824659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.41531e-05 Jy ! Component: 100 - total flux cleaned = -1.65939e-05 Jy ! Component: 150 - total flux cleaned = -1.68252e-05 Jy ! Component: 200 - total flux cleaned = -1.71835e-05 Jy ! Total flux subtracted in 200 components = -1.71835e-05 Jy ! Clean residual min=-0.001566 max=0.001351 Jy/beam ! Clean residual mean=-0.000001 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.286341 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.286341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052982Jy sigma=0.823145 ! Fit after self-cal, rms=0.052967Jy sigma=0.822972 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052967Jy sigma=0.822972 ! Fit after self-cal, rms=0.052587Jy sigma=0.819827 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8492 mas, bmaj=1.6 mas, bpa=6.088 degrees ! Estimated noise=0.196816 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195077 Jy ! Component: 100 - total flux cleaned = 0.000152127 Jy ! Component: 150 - total flux cleaned = 0.000110144 Jy ! Component: 200 - total flux cleaned = 7.29697e-05 Jy ! Total flux subtracted in 200 components = 7.29697e-05 Jy ! Clean residual min=-0.001344 max=0.001198 Jy/beam ! Clean residual mean=0.000000 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.286414 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 38 components and 0.286414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052523Jy sigma=0.818536 ! Fit after self-cal, rms=0.052509Jy sigma=0.818383 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.62748e-05 Jy ! Component: 100 - total flux cleaned = -1.21798e-05 Jy ! Component: 150 - total flux cleaned = -1.21035e-05 Jy ! Component: 200 - total flux cleaned = -1.26826e-05 Jy ! Total flux subtracted in 200 components = -1.26826e-05 Jy ! Clean residual min=-0.001251 max=0.001139 Jy/beam ! Clean residual mean=0.000000 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.286402 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 39 components and 0.286402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052463Jy sigma=0.817426 ! Fit after self-cal, rms=0.052453Jy sigma=0.817310 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052453Jy sigma=0.817310 ! Fit after self-cal, rms=0.052343Jy sigma=0.817250 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.055 mas, bmaj=2.579 mas, bpa=11.52 degrees ! Estimated noise=0.267401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.20054e-05 Jy ! Component: 100 - total flux cleaned = -2.74287e-05 Jy ! Component: 150 - total flux cleaned = -5.06285e-05 Jy ! Component: 200 - total flux cleaned = -6.04661e-05 Jy ! Total flux subtracted in 200 components = -6.04661e-05 Jy ! Clean residual min=-0.000813 max=0.000826 Jy/beam ! Clean residual mean=0.000000 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.286341 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.286341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052333Jy sigma=0.817035 ! Fit after self-cal, rms=0.052326Jy sigma=0.816950 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.91131e-05 Jy ! Component: 100 - total flux cleaned = -3.64488e-07 Jy ! Component: 150 - total flux cleaned = 9.23807e-06 Jy ! Component: 200 - total flux cleaned = 9.71304e-06 Jy ! Total flux subtracted in 200 components = 9.71304e-06 Jy ! Clean residual min=-0.000807 max=0.000830 Jy/beam ! Clean residual mean=0.000000 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.286351 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.286351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052322Jy sigma=0.816849 ! Fit after self-cal, rms=0.052316Jy sigma=0.816755 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8479 mas, bmaj=1.598 mas, bpa=6.101 degrees ! Estimated noise=0.196502 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8479 x 1.598 at 6.101 degrees (North through East) ! Clean map min=-0.00096014 max=0.18216 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6506 mas, bmaj=1.285 mas, bpa=5.718 degrees ! Estimated noise=0.420832 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150708 Jy ! Component: 100 - total flux cleaned = 0.213512 Jy ! Component: 150 - total flux cleaned = 0.242941 Jy ! Component: 200 - total flux cleaned = 0.258531 Jy ! Total flux subtracted in 200 components = 0.258531 Jy ! Clean residual min=-0.002731 max=0.007735 Jy/beam ! Clean residual mean=0.000004 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.258531 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.258531 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8479 mas, bmaj=1.598 mas, bpa=6.101 degrees ! Estimated noise=0.196502 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122405 Jy ! Component: 100 - total flux cleaned = 0.0185735 Jy ! Component: 150 - total flux cleaned = 0.0221036 Jy ! Component: 200 - total flux cleaned = 0.0242222 Jy ! Total flux subtracted in 200 components = 0.0242222 Jy ! Clean residual min=-0.001020 max=0.001200 Jy/beam ! Clean residual mean=0.000001 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.282754 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 26 components and 0.282754 Jy ! Inverting map ! Added new window around map position (0.2, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134567 Jy ! Component: 100 - total flux cleaned = 0.00192592 Jy ! Component: 150 - total flux cleaned = 0.00235766 Jy ! Component: 200 - total flux cleaned = 0.00258748 Jy ! Total flux subtracted in 200 components = 0.00258748 Jy ! Clean residual min=-0.000955 max=0.001069 Jy/beam ! Clean residual mean=0.000001 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.285341 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.285341 Jy ! Inverting map ! Added new window around map position (-1.4, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000650082 Jy ! Component: 100 - total flux cleaned = 0.000763413 Jy ! Component: 150 - total flux cleaned = 0.000788263 Jy ! Component: 200 - total flux cleaned = 0.000811998 Jy ! Total flux subtracted in 200 components = 0.000811998 Jy ! Clean residual min=-0.000867 max=0.000949 Jy/beam ! Clean residual mean=0.000000 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.286153 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 54 components and 0.286153 Jy ! Inverting map ! Added new window around map position (2.4, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240544 Jy ! Component: 100 - total flux cleaned = 0.000217435 Jy ! Component: 150 - total flux cleaned = 0.000239152 Jy ! Component: 200 - total flux cleaned = 0.000218543 Jy ! Total flux subtracted in 200 components = 0.000218543 Jy ! Clean residual min=-0.000815 max=0.000787 Jy/beam ! Clean residual mean=0.000000 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.286372 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 66 components and 0.286372 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.055 mas, bmaj=2.579 mas, bpa=11.52 degrees ! Estimated noise=0.267401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395189 Jy ! Component: 100 - total flux cleaned = 0.000500691 Jy ! Component: 150 - total flux cleaned = 0.000527175 Jy ! Component: 200 - total flux cleaned = 0.000526583 Jy ! Total flux subtracted in 200 components = 0.000526583 Jy ! Clean residual min=-0.000741 max=0.000743 Jy/beam ! Clean residual mean=0.000001 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.286898 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.54441e-05 Jy ! Component: 100 - total flux cleaned = 2.98823e-05 Jy ! Component: 150 - total flux cleaned = 4.26985e-05 Jy ! Component: 200 - total flux cleaned = 4.25769e-05 Jy ! Total flux subtracted in 200 components = 4.25769e-05 Jy ! Clean residual min=-0.000733 max=0.000746 Jy/beam ! Clean residual mean=0.000000 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.286941 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 95 components and 0.286941 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8479 mas, bmaj=1.598 mas, bpa=6.101 degrees ! Estimated noise=0.196502 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013801 Jy ! Component: 100 - total flux cleaned = -0.00019732 Jy ! Component: 150 - total flux cleaned = -0.000216138 Jy ! Component: 200 - total flux cleaned = -0.000216222 Jy ! Total flux subtracted in 200 components = -0.000216222 Jy ! Clean residual min=-0.000795 max=0.000801 Jy/beam ! Clean residual mean=0.000000 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.286725 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 106 components and 0.286725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052140Jy sigma=0.812972 ! Fit after self-cal, rms=0.052105Jy sigma=0.812423 wmodel J1535+4957_X_map.mod ! Writing 106 model components to file: J1535+4957_X_map.mod wobs J1535+4957_X_uvs.fits ! Writing UV FITS file: J1535+4957_X_uvs.fits wwins J1535+4957_X_map.win ! wwins: Wrote 6 windows to J1535+4957_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.09854e-05 Jy ! Component: 100 - total flux cleaned = 5.44675e-05 Jy ! Component: 150 - total flux cleaned = 9.41437e-05 Jy ! Component: 200 - total flux cleaned = 8.14746e-05 Jy ! Component: 250 - total flux cleaned = 8.14437e-05 Jy ! Component: 300 - total flux cleaned = 2.059e-05 Jy ! Component: 350 - total flux cleaned = -2.70543e-05 Jy ! Component: 400 - total flux cleaned = -6.23122e-05 Jy ! Component: 450 - total flux cleaned = -7.39865e-05 Jy ! Component: 500 - total flux cleaned = -0.000108317 Jy ! Component: 550 - total flux cleaned = -0.000130742 Jy ! Component: 600 - total flux cleaned = -0.000130667 Jy ! Component: 650 - total flux cleaned = -0.000141678 Jy ! Component: 700 - total flux cleaned = -0.000141766 Jy ! Component: 750 - total flux cleaned = -0.000173781 Jy ! Component: 800 - total flux cleaned = -0.000163258 Jy ! Component: 850 - total flux cleaned = -0.00019465 Jy ! Component: 900 - total flux cleaned = -0.000236025 Jy ! Component: 950 - total flux cleaned = -0.000215272 Jy ! Component: 1000 - total flux cleaned = -0.000184693 Jy ! Component: 1050 - total flux cleaned = -0.000214976 Jy ! Component: 1100 - total flux cleaned = -0.000224995 Jy ! Component: 1150 - total flux cleaned = -0.000195115 Jy ! Component: 1200 - total flux cleaned = -0.000224708 Jy ! Component: 1250 - total flux cleaned = -0.000214935 Jy ! Component: 1300 - total flux cleaned = -0.000234276 Jy ! Component: 1350 - total flux cleaned = -0.000234179 Jy ! Component: 1400 - total flux cleaned = -0.000224551 Jy ! Component: 1450 - total flux cleaned = -0.000215047 Jy ! Component: 1500 - total flux cleaned = -0.00025269 Jy ! Component: 1550 - total flux cleaned = -0.000252671 Jy ! Component: 1600 - total flux cleaned = -0.000234149 Jy ! Component: 1650 - total flux cleaned = -0.000280332 Jy ! Component: 1700 - total flux cleaned = -0.000280303 Jy ! Component: 1750 - total flux cleaned = -0.000298376 Jy ! Component: 1800 - total flux cleaned = -0.000316504 Jy ! Component: 1850 - total flux cleaned = -0.00032553 Jy ! Component: 1900 - total flux cleaned = -0.000334532 Jy ! Component: 1950 - total flux cleaned = -0.000325527 Jy ! Component: 2000 - total flux cleaned = -0.000369627 Jy ! Component: 2050 - total flux cleaned = -0.000343247 Jy ! Component: 2100 - total flux cleaned = -0.000325839 Jy ! Component: 2150 - total flux cleaned = -0.000351788 Jy ! Component: 2200 - total flux cleaned = -0.000334482 Jy ! Component: 2250 - total flux cleaned = -0.000360127 Jy ! Component: 2300 - total flux cleaned = -0.000317572 Jy ! Component: 2350 - total flux cleaned = -0.00031759 Jy ! Component: 2400 - total flux cleaned = -0.000309204 Jy ! Component: 2450 - total flux cleaned = -0.000267261 Jy ! Component: 2500 - total flux cleaned = -0.000333904 Jy ! Component: 2550 - total flux cleaned = -0.000284133 Jy ! Component: 2600 - total flux cleaned = -0.000284166 Jy ! Component: 2650 - total flux cleaned = -0.000251408 Jy ! Component: 2700 - total flux cleaned = -0.000235125 Jy ! Component: 2750 - total flux cleaned = -0.000227078 Jy ! Component: 2800 - total flux cleaned = -0.000243298 Jy ! Component: 2850 - total flux cleaned = -0.000227245 Jy ! Component: 2900 - total flux cleaned = -0.000251244 Jy ! Component: 2950 - total flux cleaned = -0.00018759 Jy ! Component: 3000 - total flux cleaned = -0.000155937 Jy ! Component: 3050 - total flux cleaned = -0.000155905 Jy ! Component: 3100 - total flux cleaned = -0.000132467 Jy ! Component: 3150 - total flux cleaned = -0.000116888 Jy ! Component: 3200 - total flux cleaned = -0.000140178 Jy ! Component: 3250 - total flux cleaned = -0.000101593 Jy ! Component: 3300 - total flux cleaned = -7.8569e-05 Jy ! Component: 3350 - total flux cleaned = -2.50514e-05 Jy ! Component: 3400 - total flux cleaned = -6.31601e-05 Jy ! Component: 3450 - total flux cleaned = -4.04355e-05 Jy ! Component: 3500 - total flux cleaned = -4.04502e-05 Jy ! Component: 3550 - total flux cleaned = -1.78928e-05 Jy ! Component: 3600 - total flux cleaned = -4.0339e-05 Jy ! Component: 3650 - total flux cleaned = 1.17599e-05 Jy ! Component: 3700 - total flux cleaned = -2.52858e-05 Jy ! Component: 3750 - total flux cleaned = 4.23957e-06 Jy ! Component: 3800 - total flux cleaned = 2.62839e-05 Jy ! Component: 3850 - total flux cleaned = 5.56083e-05 Jy ! Component: 3900 - total flux cleaned = 3.38106e-05 Jy ! Component: 3950 - total flux cleaned = 6.2806e-05 Jy ! Component: 4000 - total flux cleaned = 9.17056e-05 Jy ! Component: 4050 - total flux cleaned = 0.000106117 Jy ! Total flux subtracted in 4096 components = 9.89577e-05 Jy ! Clean residual min=-0.000420 max=0.000389 Jy/beam ! Clean residual mean=-0.000000 rms=0.000122 Jy/beam ! Combined flux in latest and established models = 0.286823 Jy keep ! Adding 335 model components to the UV plane model. ! The established model now contains 440 components and 0.286824 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1535+4957_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8479 x 1.598 at 6.101 degrees (North through East) ! Clean map min=-0.00061177 max=0.18134 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1535+4957_X_map.fits wmodel /vlbi/bp222/temp_maps//J1535+4957_X_map.mod ! Writing 440 model components to file: /vlbi/bp222/temp_maps//J1535+4957_X_map.mod wobs /vlbi/bp222/temp_maps//J1535+4957_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1535+4957_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1535+4957_X_map.win ! wwins: Wrote 7 windows to /vlbi/bp222/temp_maps//J1535+4957_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.181337 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000121838 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.201566 0.201566 0.403131 0.806262 1.61252 3.22505 6.4501 12.9002 25.8004 51.6008 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.181 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1488.35 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1535+4957_X_dfm.log closed on Thu Feb 14 23:00:55 2019