! Started logfile: /vlbi/bp222/temp_maps//J1526-1351_X_dfm.log on Thu Feb 14 23:00:31 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1526-1351_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1526-1351_X_uvm.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! AN table 2: 92 integrations on 21 of 21 possible baselines. ! AN table 3: 23 integrations on 36 of 36 possible baselines. ! AN table 4: 46 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.878346 visibilities/baseline/integration-bin. ! Found source: J1526-1351 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 88200 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1526-1351_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.006177Jy sigma=15.571059 ! Fit after self-cal, rms=0.935934Jy sigma=14.325953 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.652 mas, bmaj=1.688 mas, bpa=-5.038 degrees ! Estimated noise=0.343378 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0474233 Jy ! Component: 100 - total flux cleaned = 0.0602782 Jy ! Total flux subtracted in 100 components = 0.0602782 Jy ! Clean residual min=-0.005400 max=0.007952 Jy/beam ! Clean residual mean=-0.000008 rms=0.001703 Jy/beam ! Combined flux in latest and established models = 0.0602782 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0602782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089497Jy sigma=1.455832 ! Fit after self-cal, rms=0.088513Jy sigma=1.443092 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8476 mas, bmaj=2.127 mas, bpa=-7.261 degrees ! Estimated noise=0.160471 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195369 Jy ! Component: 100 - total flux cleaned = 0.0309458 Jy ! Component: 150 - total flux cleaned = 0.0376689 Jy ! Component: 200 - total flux cleaned = 0.0416301 Jy ! Total flux subtracted in 200 components = 0.0416301 Jy ! Clean residual min=-0.011356 max=0.016070 Jy/beam ! Clean residual mean=0.000007 rms=0.003300 Jy/beam ! Combined flux in latest and established models = 0.101908 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.101908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085668Jy sigma=1.353174 ! Fit after self-cal, rms=0.085674Jy sigma=1.350497 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8476 x 2.127 at -7.261 degrees (North through East) ! Clean map min=-0.011373 max=0.065935 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.12 FD 1.09 HN 1.55 KP 0.79 ! LA 0.57 MK 1.31 NL 2.29 OV 1.74 ! PT 0.49 SC 1.35 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.44 FD 1.06 HN 1.26 KP 0.85 ! MK 0.85 NL 1.23 OV 1.17 ! ! Telescope amplitude corrections in sub-array 3: ! BR 2.41 HN 2.56 KP 0.64 LA 0.59 ! MK 1.48 NL 1.85 OV 3.98 PT 0.41 ! SC 2.15 ! ! Telescope amplitude corrections in sub-array 4: ! BR 2.27 FD 1.00 HN 1.27 KP 0.53 ! MK 1.04 NL 1.50 OV 0.90 SC 1.30 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.27 FD 1.07 HN 1.54 KP 0.78 ! LA 0.58 MK 1.31 NL 2.18 OV 1.67 ! PT 0.49 SC 1.35 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.49 FD 1.07 HN 1.27 KP 0.77 ! MK 0.88 NL 1.19 OV 1.15 ! ! Telescope amplitude corrections in sub-array 3: ! BR 2.44 HN 3.09 KP 0.62 LA 0.60 ! MK 1.39 NL 2.16 OV 4.58 PT 0.43 ! SC 1.51 ! ! Telescope amplitude corrections in sub-array 4: ! BR 2.28 FD 1.04 HN 1.34 KP 0.52 ! MK 1.12 NL 1.56 OV 0.89 SC 1.50 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 2.23 FD 1.05 HN 1.59 KP 0.78 ! LA 0.58 MK 1.32 NL 2.17 OV 1.58 ! PT 0.49 SC 1.27 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.45 FD 1.06 HN 1.22 KP 0.78 ! MK 0.92 NL 1.23 OV 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 2.78 HN 2.69 KP 0.63 LA 0.60 ! MK 1.35 NL 1.96 OV 5.82 PT 0.42 ! SC 1.40 ! ! Telescope amplitude corrections in sub-array 4: ! BR 2.38 FD 1.03 HN 1.36 KP 0.54 ! MK 1.23 NL 1.65 OV 0.92 SC 1.46 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 2.30 FD 1.03 HN 1.49 KP 0.75 ! LA 0.59 MK 1.32 NL 2.11 OV 1.57 ! PT 0.50 SC 1.34 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.59 FD 1.09 HN 1.17 KP 0.74 ! MK 0.91 NL 1.27 OV 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 2.92 HN 3.05 KP 0.63 LA 0.60 ! MK 1.40 NL 2.12 OV 8.61 PT 0.42 ! SC 1.44 ! ! Telescope amplitude corrections in sub-array 4: ! BR 2.13 FD 1.04 HN 1.39 KP 0.53 ! MK 1.16 NL 1.58 OV 0.93 SC 1.32 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 2.35 FD 1.01 HN 1.40 KP 0.72 ! LA 0.60 MK 1.28 NL 2.01 OV 1.40 ! PT 0.53 SC 1.34 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.63 FD 1.13 HN 1.29 KP 0.72 ! MK 0.89 NL 1.21 OV 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 3.12 HN 2.51 KP 0.61 LA 0.58 ! MK 1.61 NL 1.88 OV 5.57 PT 0.43 ! SC 1.61 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.97 FD 1.09 HN 1.31 KP 0.54 ! MK 1.13 NL 1.47 OV 1.00 SC 1.34 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 2.07 FD 1.00 HN 1.42 KP 0.72 ! LA 0.60 MK 1.20 NL 2.06 OV 1.36 ! PT 0.52 SC 1.29 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.65 FD 1.11 HN 1.27 KP 0.71 ! MK 0.92 NL 1.26 OV 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 2.42 HN 3.00 KP 0.61 LA 0.59 ! MK 1.42 NL 2.16 OV 4.92 PT 0.43 ! SC 1.56 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.77 FD 0.99 HN 1.34 KP 0.55 ! MK 1.20 NL 1.48 OV 1.06 SC 1.43 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 2.02 FD 1.03 HN 1.45 KP 0.71 ! LA 0.59 MK 1.22 NL 2.08 OV 1.25 ! PT 0.53 SC 1.27 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.67 FD 1.15 HN 1.14 KP 0.66 ! MK 1.01 NL 1.28 OV 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.98 HN 2.60 KP 0.62 LA 0.60 ! MK 1.38 NL 1.84 OV 3.54 PT 0.42 ! SC 1.44 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.48 FD 1.11 HN 1.14 KP 0.59 ! MK 0.88 NL 1.56 OV 1.07 SC 1.20 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.92 FD 1.04 HN 1.49 KP 0.70 ! LA 0.60 MK 1.16 NL 2.13 OV 1.23 ! PT 0.52 SC 1.23 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.53 FD 1.16 HN 1.27 KP 0.68 ! MK 0.85 NL 1.20 OV 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 2.10 HN 2.06 KP 0.62 LA 0.59 ! MK 1.37 NL 1.93 OV 3.17 PT 0.43 ! SC 1.33 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.48 FD 0.96 HN 1.23 KP 0.63 ! MK 0.84 NL 1.63 OV 1.13 SC 1.33 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.70 FD 1.04 HN 1.39 KP 0.71 ! LA 0.58 MK 1.17 NL 2.02 OV 1.22 ! PT 0.54 SC 1.29 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.52 FD 1.15 HN 1.21 KP 0.69 ! MK 0.88 NL 1.23 OV 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.92 HN 2.17 KP 0.61 LA 0.60 ! MK 1.44 NL 1.80 OV 2.54 PT 0.45 ! SC 1.48 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.58 FD 1.00 HN 1.18 KP 0.70 ! MK 0.90 NL 1.35 OV 1.15 SC 1.09 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.65 FD 1.06 HN 1.44 KP 0.70 ! LA 0.60 MK 1.22 NL 1.93 OV 1.18 ! PT 0.52 SC 1.24 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.50 FD 1.15 HN 1.21 KP 0.69 ! MK 0.92 NL 1.18 OV 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 2.09 HN 2.68 KP 0.61 LA 0.60 ! MK 1.42 NL 2.09 OV 2.28 PT 0.43 ! SC 1.31 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.58 FD 1.10 HN 1.23 KP 0.67 ! MK 0.97 NL 1.47 OV 1.09 SC 1.12 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.66 FD 1.07 HN 1.42 KP 0.72 ! LA 0.59 MK 1.25 NL 2.01 OV 1.19 ! PT 0.52 SC 1.21 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.58 FD 1.18 HN 1.23 KP 0.69 ! MK 0.94 NL 1.20 OV 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.85 HN 2.25 KP 0.62 LA 0.60 ! MK 1.35 NL 1.75 OV 2.34 PT 0.43 ! SC 1.11 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.31 FD 1.01 HN 1.02 KP 0.75 ! MK 1.09 NL 1.41 OV 1.18 SC 1.18 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.50 FD 1.11 HN 1.34 KP 0.72 ! LA 0.59 MK 1.25 NL 1.93 OV 1.17 ! PT 0.53 SC 1.25 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.47 FD 1.24 HN 1.17 KP 0.67 ! MK 0.84 NL 1.22 OV 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.87 HN 2.17 KP 0.61 LA 0.61 ! MK 1.22 NL 1.93 OV 2.09 PT 0.43 ! SC 1.43 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.47 FD 0.95 HN 1.18 KP 0.73 ! MK 0.92 NL 1.31 OV 1.21 SC 1.14 ! ! ! Fit before self-cal, rms=0.085674Jy sigma=1.350497 ! Fit after self-cal, rms=0.165102Jy sigma=1.097864 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9093 mas, bmaj=2.369 mas, bpa=-8.54 degrees ! Estimated noise=0.176802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.4, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00927011 Jy ! Component: 100 - total flux cleaned = 0.0124455 Jy ! Component: 150 - total flux cleaned = 0.0126083 Jy ! Component: 200 - total flux cleaned = 0.0126018 Jy ! Total flux subtracted in 200 components = 0.0126018 Jy ! Clean residual min=-0.006723 max=0.008413 Jy/beam ! Clean residual mean=0.000001 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 0.11451 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 41 components and 0.11451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.164078Jy sigma=1.077920 ! Fit after self-cal, rms=0.168098Jy sigma=1.050841 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.168098Jy sigma=1.050841 ! Fit after self-cal, rms=0.170391Jy sigma=1.028309 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9179 mas, bmaj=2.417 mas, bpa=-9.034 degrees ! Estimated noise=0.185457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00621317 Jy ! Component: 100 - total flux cleaned = 0.00738996 Jy ! Component: 150 - total flux cleaned = 0.00753214 Jy ! Component: 200 - total flux cleaned = 0.00753478 Jy ! Total flux subtracted in 200 components = 0.00753478 Jy ! Clean residual min=-0.005729 max=0.006720 Jy/beam ! Clean residual mean=0.000000 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 0.122045 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 0.122045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.169721Jy sigma=1.020414 ! Fit after self-cal, rms=0.170088Jy sigma=1.016570 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.8, 27.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00619876 Jy ! Component: 100 - total flux cleaned = 0.00872609 Jy ! Component: 150 - total flux cleaned = 0.00872284 Jy ! Component: 200 - total flux cleaned = 0.00850339 Jy ! Total flux subtracted in 200 components = 0.00850339 Jy ! Clean residual min=-0.005020 max=0.006122 Jy/beam ! Clean residual mean=0.000000 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.130548 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 58 components and 0.130548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.169619Jy sigma=1.009987 ! Fit after self-cal, rms=0.169569Jy sigma=1.008536 ! Inverting map ! Added new window around map position (13.4, 34.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0057232 Jy ! Component: 100 - total flux cleaned = 0.00893704 Jy ! Component: 150 - total flux cleaned = 0.0112051 Jy ! Component: 200 - total flux cleaned = 0.0126161 Jy ! Total flux subtracted in 200 components = 0.0126161 Jy ! Clean residual min=-0.004637 max=0.005754 Jy/beam ! Clean residual mean=0.000005 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.143164 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 77 components and 0.143164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.169149Jy sigma=1.001404 ! Fit after self-cal, rms=0.168821Jy sigma=0.998898 ! Inverting map ! Added new window around map position (5, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509086 Jy ! Component: 100 - total flux cleaned = 0.00770598 Jy ! Component: 150 - total flux cleaned = 0.0088844 Jy ! Component: 200 - total flux cleaned = 0.00931341 Jy ! Total flux subtracted in 200 components = 0.00931341 Jy ! Clean residual min=-0.004424 max=0.004938 Jy/beam ! Clean residual mean=0.000007 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.152478 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 100 components and 0.152478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.168381Jy sigma=0.995261 ! Fit after self-cal, rms=0.168079Jy sigma=0.994241 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.168079Jy sigma=0.994241 ! Fit after self-cal, rms=0.178048Jy sigma=0.961749 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9212 mas, bmaj=2.442 mas, bpa=-9.176 degrees ! Estimated noise=0.183641 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384871 Jy ! Component: 100 - total flux cleaned = 0.00590573 Jy ! Component: 150 - total flux cleaned = 0.00671464 Jy ! Component: 200 - total flux cleaned = 0.00718125 Jy ! Total flux subtracted in 200 components = 0.00718125 Jy ! Clean residual min=-0.003774 max=0.004291 Jy/beam ! Clean residual mean=-0.000001 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.159659 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 115 components and 0.159659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177753Jy sigma=0.959420 ! Fit after self-cal, rms=0.177754Jy sigma=0.957798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288545 Jy ! Component: 100 - total flux cleaned = 0.00311231 Jy ! Component: 150 - total flux cleaned = 0.00332487 Jy ! Component: 200 - total flux cleaned = 0.00370731 Jy ! Total flux subtracted in 200 components = 0.00370731 Jy ! Clean residual min=-0.003741 max=0.004190 Jy/beam ! Clean residual mean=-0.000001 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.163366 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 134 components and 0.163366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177366Jy sigma=0.955419 ! Fit after self-cal, rms=0.177269Jy sigma=0.954788 ! Inverting map ! Added new window around map position (2.2, 32.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389205 Jy ! Component: 100 - total flux cleaned = 0.005801 Jy ! Component: 150 - total flux cleaned = 0.00657024 Jy ! Component: 200 - total flux cleaned = 0.00702379 Jy ! Total flux subtracted in 200 components = 0.00702379 Jy ! Clean residual min=-0.003555 max=0.004083 Jy/beam ! Clean residual mean=-0.000004 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.17039 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 155 components and 0.17039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.176968Jy sigma=0.952335 ! Fit after self-cal, rms=0.176797Jy sigma=0.951804 ! Inverting map ! Added new window around map position (9.8, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332697 Jy ! Component: 100 - total flux cleaned = 0.00511714 Jy ! Component: 150 - total flux cleaned = 0.00620981 Jy ! Component: 200 - total flux cleaned = 0.0068141 Jy ! Total flux subtracted in 200 components = 0.0068141 Jy ! Clean residual min=-0.003345 max=0.003769 Jy/beam ! Clean residual mean=-0.000004 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.177204 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 168 components and 0.177204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.176527Jy sigma=0.950072 ! Fit after self-cal, rms=0.176433Jy sigma=0.949758 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.176433Jy sigma=0.949758 ! Fit after self-cal, rms=0.172785Jy sigma=0.946764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.39 mas, bmaj=4.591 mas, bpa=-6.589 degrees ! Estimated noise=0.187531 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128924 Jy ! Component: 100 - total flux cleaned = 0.00301001 Jy ! Component: 150 - total flux cleaned = 0.00388517 Jy ! Component: 200 - total flux cleaned = 0.00420783 Jy ! Total flux subtracted in 200 components = 0.00420783 Jy ! Clean residual min=-0.004169 max=0.004586 Jy/beam ! Clean residual mean=-0.000007 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.181412 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 190 components and 0.181412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.172692Jy sigma=0.945525 ! Fit after self-cal, rms=0.172528Jy sigma=0.945066 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000736969 Jy ! Component: 100 - total flux cleaned = 0.0012908 Jy ! Component: 150 - total flux cleaned = 0.0015878 Jy ! Component: 200 - total flux cleaned = 0.00200813 Jy ! Total flux subtracted in 200 components = 0.00200813 Jy ! Clean residual min=-0.004152 max=0.004609 Jy/beam ! Clean residual mean=-0.000006 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.18342 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 200 components and 0.18342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.172457Jy sigma=0.944454 ! Fit after self-cal, rms=0.172397Jy sigma=0.944301 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9248 mas, bmaj=2.445 mas, bpa=-8.768 degrees ! Estimated noise=0.180878 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9248 x 2.445 at -8.768 degrees (North through East) ! Clean map min=-0.0057236 max=0.071253 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6916 mas, bmaj=1.867 mas, bpa=-6.711 degrees ! Estimated noise=0.422497 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0558924 Jy ! Component: 100 - total flux cleaned = 0.0747458 Jy ! Component: 150 - total flux cleaned = 0.0877896 Jy ! Component: 200 - total flux cleaned = 0.0982099 Jy ! Total flux subtracted in 200 components = 0.0982099 Jy ! Clean residual min=-0.006078 max=0.009023 Jy/beam ! Clean residual mean=-0.000005 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 0.0982099 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0982099 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9248 mas, bmaj=2.445 mas, bpa=-8.768 degrees ! Estimated noise=0.180878 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138485 Jy ! Component: 100 - total flux cleaned = 0.023597 Jy ! Component: 150 - total flux cleaned = 0.0317212 Jy ! Component: 200 - total flux cleaned = 0.0378623 Jy ! Total flux subtracted in 200 components = 0.0378623 Jy ! Clean residual min=-0.005913 max=0.006210 Jy/beam ! Clean residual mean=-0.000002 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 0.136072 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 52 components and 0.136072 Jy ! Inverting map ! Added new window around map position (10.4, -13.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00617135 Jy ! Component: 100 - total flux cleaned = 0.0111676 Jy ! Component: 150 - total flux cleaned = 0.0155247 Jy ! Component: 200 - total flux cleaned = 0.0197197 Jy ! Total flux subtracted in 200 components = 0.0197197 Jy ! Clean residual min=-0.004463 max=0.004199 Jy/beam ! Clean residual mean=-0.000003 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.155792 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 69 components and 0.155792 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.39 mas, bmaj=4.591 mas, bpa=-6.589 degrees ! Estimated noise=0.187531 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00592474 Jy ! Component: 100 - total flux cleaned = 0.010834 Jy ! Component: 150 - total flux cleaned = 0.014674 Jy ! Component: 200 - total flux cleaned = 0.0175985 Jy ! Total flux subtracted in 200 components = 0.0175985 Jy ! Clean residual min=-0.004132 max=0.004790 Jy/beam ! Clean residual mean=-0.000006 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 0.17339 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275116 Jy ! Component: 100 - total flux cleaned = 0.00475643 Jy ! Component: 150 - total flux cleaned = 0.00605447 Jy ! Component: 200 - total flux cleaned = 0.00724677 Jy ! Total flux subtracted in 200 components = 0.00724677 Jy ! Clean residual min=-0.004281 max=0.004697 Jy/beam ! Clean residual mean=-0.000005 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.180637 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 110 components and 0.180637 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9248 mas, bmaj=2.445 mas, bpa=-8.768 degrees ! Estimated noise=0.180878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220859 Jy ! Component: 100 - total flux cleaned = 0.00365073 Jy ! Component: 150 - total flux cleaned = 0.00465622 Jy ! Component: 200 - total flux cleaned = 0.00581588 Jy ! Total flux subtracted in 200 components = 0.00581588 Jy ! Clean residual min=-0.003407 max=0.003526 Jy/beam ! Clean residual mean=-0.000003 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.186453 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 136 components and 0.186453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.172139Jy sigma=0.946898 ! Fit after self-cal, rms=0.171819Jy sigma=0.945633 wmodel J1526-1351_X_map.mod ! Writing 136 model components to file: J1526-1351_X_map.mod wobs J1526-1351_X_uvs.fits ! Writing UV FITS file: J1526-1351_X_uvs.fits wwins J1526-1351_X_map.win ! wwins: Wrote 10 windows to J1526-1351_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000916778 Jy ! Component: 100 - total flux cleaned = 0.0013495 Jy ! Component: 150 - total flux cleaned = 0.00176283 Jy ! Component: 200 - total flux cleaned = 0.00239117 Jy ! Component: 250 - total flux cleaned = 0.00277944 Jy ! Component: 300 - total flux cleaned = 0.00305048 Jy ! Component: 350 - total flux cleaned = 0.00336899 Jy ! Component: 400 - total flux cleaned = 0.00362851 Jy ! Component: 450 - total flux cleaned = 0.00388383 Jy ! Component: 500 - total flux cleaned = 0.00403505 Jy ! Component: 550 - total flux cleaned = 0.00423368 Jy ! Component: 600 - total flux cleaned = 0.00442898 Jy ! Component: 650 - total flux cleaned = 0.00452516 Jy ! Component: 700 - total flux cleaned = 0.00462058 Jy ! Component: 750 - total flux cleaned = 0.00471473 Jy ! Component: 800 - total flux cleaned = 0.004854 Jy ! Component: 850 - total flux cleaned = 0.00503748 Jy ! Component: 900 - total flux cleaned = 0.00512832 Jy ! Component: 950 - total flux cleaned = 0.00526338 Jy ! Component: 1000 - total flux cleaned = 0.00539718 Jy ! Component: 1050 - total flux cleaned = 0.00557315 Jy ! Component: 1100 - total flux cleaned = 0.00579148 Jy ! Component: 1150 - total flux cleaned = 0.00609373 Jy ! Component: 1200 - total flux cleaned = 0.006308 Jy ! Component: 1250 - total flux cleaned = 0.00643548 Jy ! Component: 1300 - total flux cleaned = 0.00673058 Jy ! Component: 1350 - total flux cleaned = 0.00702349 Jy ! Component: 1400 - total flux cleaned = 0.00739708 Jy ! Component: 1450 - total flux cleaned = 0.00776775 Jy ! Component: 1500 - total flux cleaned = 0.0079314 Jy ! Component: 1550 - total flux cleaned = 0.00833795 Jy ! Component: 1600 - total flux cleaned = 0.00849905 Jy ! Component: 1650 - total flux cleaned = 0.00893946 Jy ! Component: 1700 - total flux cleaned = 0.00901898 Jy ! Component: 1750 - total flux cleaned = 0.00941441 Jy ! Component: 1800 - total flux cleaned = 0.00965029 Jy ! Component: 1850 - total flux cleaned = 0.0100405 Jy ! Component: 1900 - total flux cleaned = 0.0101955 Jy ! Component: 1950 - total flux cleaned = 0.0105037 Jy ! Component: 2000 - total flux cleaned = 0.0106183 Jy ! Component: 2050 - total flux cleaned = 0.0109228 Jy ! Component: 2100 - total flux cleaned = 0.0110741 Jy ! Component: 2150 - total flux cleaned = 0.0113751 Jy ! Component: 2200 - total flux cleaned = 0.0116741 Jy ! Component: 2250 - total flux cleaned = 0.0119711 Jy ! Component: 2300 - total flux cleaned = 0.0120078 Jy ! Component: 2350 - total flux cleaned = 0.0123382 Jy ! Component: 2400 - total flux cleaned = 0.0125939 Jy ! Component: 2450 - total flux cleaned = 0.0128115 Jy ! Component: 2500 - total flux cleaned = 0.0129559 Jy ! Component: 2550 - total flux cleaned = 0.0132797 Jy ! Component: 2600 - total flux cleaned = 0.0134585 Jy ! Component: 2650 - total flux cleaned = 0.0137783 Jy ! Component: 2700 - total flux cleaned = 0.0141318 Jy ! Component: 2750 - total flux cleaned = 0.0143424 Jy ! Component: 2800 - total flux cleaned = 0.0145874 Jy ! Component: 2850 - total flux cleaned = 0.0147961 Jy ! Component: 2900 - total flux cleaned = 0.0150735 Jy ! Component: 2950 - total flux cleaned = 0.0153149 Jy ! Component: 3000 - total flux cleaned = 0.015521 Jy ! Component: 3050 - total flux cleaned = 0.0158623 Jy ! Component: 3100 - total flux cleaned = 0.0160662 Jy ! Component: 3150 - total flux cleaned = 0.0163706 Jy ! Component: 3200 - total flux cleaned = 0.0166736 Jy ! Component: 3250 - total flux cleaned = 0.0166735 Jy ! Component: 3300 - total flux cleaned = 0.0170071 Jy ! Component: 3350 - total flux cleaned = 0.0172395 Jy ! Component: 3400 - total flux cleaned = 0.0174382 Jy ! Component: 3450 - total flux cleaned = 0.0177346 Jy ! Component: 3500 - total flux cleaned = 0.0179968 Jy ! Component: 3550 - total flux cleaned = 0.0182254 Jy ! Component: 3600 - total flux cleaned = 0.0183554 Jy ! Component: 3650 - total flux cleaned = 0.0185499 Jy ! Component: 3700 - total flux cleaned = 0.0188401 Jy ! Component: 3750 - total flux cleaned = 0.019001 Jy ! Component: 3800 - total flux cleaned = 0.0191287 Jy ! Component: 3850 - total flux cleaned = 0.0192562 Jy ! Component: 3900 - total flux cleaned = 0.0196053 Jy ! Component: 3950 - total flux cleaned = 0.0197634 Jy ! Component: 4000 - total flux cleaned = 0.019952 Jy ! Component: 4050 - total flux cleaned = 0.0202029 Jy ! Total flux subtracted in 4096 components = 0.0202655 Jy ! Clean residual min=-0.001611 max=0.001727 Jy/beam ! Clean residual mean=-0.000004 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.206719 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 458 components and 0.206719 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1526-1351_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9248 x 2.445 at -8.768 degrees (North through East) ! Clean map min=-0.0026722 max=0.074363 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1526-1351_X_map.fits wmodel /vlbi/bp222/temp_maps//J1526-1351_X_map.mod ! Writing 458 model components to file: /vlbi/bp222/temp_maps//J1526-1351_X_map.mod wobs /vlbi/bp222/temp_maps//J1526-1351_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1526-1351_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1526-1351_X_map.win ! wwins: Wrote 11 windows to /vlbi/bp222/temp_maps//J1526-1351_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0743626 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000586981 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.36805 2.36805 4.7361 9.4722 18.9444 37.8888 75.7776 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.074 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 126.686 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1526-1351_X_dfm.log closed on Thu Feb 14 23:00:41 2019