! Started logfile: J1524-3012_S_dfm.log on Fri Feb 15 19:55:01 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J1524-3012_S_uvm.fits
! Reading UV FITS file: J1524-3012_S_uvm.fits
! AN table 1: 23 integrations on 36 of 36 possible baselines.
! AN table 2: 22 integrations on 21 of 21 possible baselines.
! AN table 3: 67 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.800918 visibilities/baseline/integration-bin.
! Found source: J1524-3012
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 11860 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1524-3012_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
!  A total of 94 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
!  A total of 94 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
!  A total of 94 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 207 telescope corrections were flagged in sub-array 1.
!  A total of 154 telescope corrections were flagged in sub-array 2.
!  A total of 345 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.007015Jy  sigma=10.522615
! Fit after  self-cal, rms=0.885792Jy  sigma=9.163414
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.649 mas, bmaj=8.411 mas, bpa=-10.42 degrees
! Estimated noise=1.12741 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0870019 Jy
! Component: 100  -  total flux cleaned = 0.116005 Jy
! Total flux subtracted in 100 components = 0.116005 Jy
! Clean residual min=-0.006236 max=0.014222 Jy/beam
! Clean residual mean=-0.000031 rms=0.001825 Jy/beam
! Combined flux in latest and established models = 0.116005 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.116005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097390Jy  sigma=0.868495
! Fit after  self-cal, rms=0.097036Jy  sigma=0.866782
! Inverting map 
! Added new window around map position (-3, -10.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157891 Jy
! Component: 100  -  total flux cleaned = 0.0255402 Jy
! Total flux subtracted in 100 components = 0.0255402 Jy
! Clean residual min=-0.005002 max=0.008908 Jy/beam
! Clean residual mean=-0.000018 rms=0.001333 Jy/beam
! Combined flux in latest and established models = 0.141545 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 32 components and 0.141545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.093880Jy  sigma=0.817181
! Fit after  self-cal, rms=0.093737Jy  sigma=0.815877
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.377 mas, bmaj=10.17 mas, bpa=-8.406 degrees
! Estimated noise=0.767812 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111756 Jy
! Component: 100  -  total flux cleaned = 0.0179059 Jy
! Component: 150  -  total flux cleaned = 0.0222376 Jy
! Component: 200  -  total flux cleaned = 0.0248578 Jy
! Total flux subtracted in 200 components = 0.0248578 Jy
! Clean residual min=-0.003594 max=0.004323 Jy/beam
! Clean residual mean=0.000001 rms=0.000976 Jy/beam
! Combined flux in latest and established models = 0.166403 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 65 components and 0.166403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.092303Jy  sigma=0.797478
! Fit after  self-cal, rms=0.092276Jy  sigma=0.797058
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.377 x 10.17 at -8.406 degrees (North through East)
! Clean map  min=-0.0035746  max=0.10753 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.56     KP        1.04     LA        1.03     
!   MK        1.07     NL        1.08     OV        0.93     PT        1.08     
!   SC        0.95     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.02     LA        1.00     MK        0.99     
!   NL        1.17     OV        0.94     PT        1.07     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.86     FD        1.04     HN        1.15     KP        1.01     
!   LA        0.92     MK        0.95     NL        1.07     PT        0.98     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.64     KP        0.94     LA        0.94     
!   MK        1.07     NL        0.96     OV        0.98     PT        1.03     
!   SC        1.12     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.57     FD        1.00     LA        0.97     MK        0.94     
!   NL        1.20     OV        0.92     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.90     FD        1.00     HN        1.07     KP        0.98     
!   LA        0.96     MK        1.03     NL        1.09     PT        0.99     
!   SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.55     KP        0.96     LA        0.93     
!   MK        1.01     NL        1.01     OV        0.97     PT        1.03     
!   SC        0.93     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.71     FD        1.03     LA        0.95     MK        0.97     
!   NL        1.22     OV        0.97     PT        0.94     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.80     FD        1.03     HN        1.09     KP        1.02     
!   LA        0.94     MK        1.14     NL        0.96     PT        0.96     
!   SC        0.95     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.092276Jy  sigma=0.797058
! Fit after  self-cal, rms=0.095163Jy  sigma=0.783930
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.429 mas, bmaj=10.16 mas, bpa=-8.011 degrees
! Estimated noise=0.770757 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00155566 Jy
! Component: 100  -  total flux cleaned = -0.00183149 Jy
! Component: 150  -  total flux cleaned = -0.00195152 Jy
! Component: 200  -  total flux cleaned = -0.0019876 Jy
! Total flux subtracted in 200 components = -0.0019876 Jy
! Clean residual min=-0.002442 max=0.002732 Jy/beam
! Clean residual mean=-0.000010 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.164415 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 85 components and 0.164415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.095118Jy  sigma=0.783454
! Fit after  self-cal, rms=0.095198Jy  sigma=0.783170
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.095198Jy  sigma=0.783170
! Fit after  self-cal, rms=0.095919Jy  sigma=0.782691
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.432 mas, bmaj=10.16 mas, bpa=-8.074 degrees
! Estimated noise=0.769881 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00132847 Jy
! Component: 100  -  total flux cleaned = -0.0015851 Jy
! Component: 150  -  total flux cleaned = -0.00161723 Jy
! Component: 200  -  total flux cleaned = -0.00167702 Jy
! Total flux subtracted in 200 components = -0.00167702 Jy
! Clean residual min=-0.002290 max=0.002629 Jy/beam
! Clean residual mean=-0.000010 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.162738 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 94 components and 0.162738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.095889Jy  sigma=0.782395
! Fit after  self-cal, rms=0.095913Jy  sigma=0.782377
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.57402e-05 Jy
! Component: 100  -  total flux cleaned = -0.00014964 Jy
! Component: 150  -  total flux cleaned = -0.000200065 Jy
! Component: 200  -  total flux cleaned = -0.000223849 Jy
! Total flux subtracted in 200 components = -0.000223849 Jy
! Clean residual min=-0.002282 max=0.002602 Jy/beam
! Clean residual mean=-0.000010 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.162514 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 102 components and 0.162514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.095898Jy  sigma=0.782234
! Fit after  self-cal, rms=0.095902Jy  sigma=0.782228
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.095902Jy  sigma=0.782228
! Fit after  self-cal, rms=0.097128Jy  sigma=0.780053
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.435 mas, bmaj=10.16 mas, bpa=-8.1 degrees
! Estimated noise=0.76893 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000344516 Jy
! Component: 100  -  total flux cleaned = -0.000553438 Jy
! Component: 150  -  total flux cleaned = -0.000676329 Jy
! Component: 200  -  total flux cleaned = -0.000719588 Jy
! Total flux subtracted in 200 components = -0.000719588 Jy
! Clean residual min=-0.002230 max=0.002357 Jy/beam
! Clean residual mean=-0.000008 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.161794 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 116 components and 0.161794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097109Jy  sigma=0.779885
! Fit after  self-cal, rms=0.097159Jy  sigma=0.779803
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.86371e-06 Jy
! Component: 100  -  total flux cleaned = -6.43276e-05 Jy
! Component: 150  -  total flux cleaned = -6.42904e-05 Jy
! Component: 200  -  total flux cleaned = -4.68351e-05 Jy
! Total flux subtracted in 200 components = -4.68351e-05 Jy
! Clean residual min=-0.002244 max=0.002364 Jy/beam
! Clean residual mean=-0.000007 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.161748 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 125 components and 0.161748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097149Jy  sigma=0.779727
! Fit after  self-cal, rms=0.097152Jy  sigma=0.779719
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097152Jy  sigma=0.779719
! Fit after  self-cal, rms=0.097327Jy  sigma=0.779671
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.023 mas, bmaj=19.94 mas, bpa=-3.345 degrees
! Estimated noise=0.900383 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000564231 Jy
! Component: 100  -  total flux cleaned = -0.00065402 Jy
! Component: 150  -  total flux cleaned = -0.00070319 Jy
! Component: 200  -  total flux cleaned = -0.000703885 Jy
! Total flux subtracted in 200 components = -0.000703885 Jy
! Clean residual min=-0.002316 max=0.002869 Jy/beam
! Clean residual mean=-0.000013 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.161044 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 129 components and 0.161044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097321Jy  sigma=0.779625
! Fit after  self-cal, rms=0.097330Jy  sigma=0.779599
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.42161e-06 Jy
! Component: 100  -  total flux cleaned = 1.7751e-05 Jy
! Component: 150  -  total flux cleaned = 1.75349e-05 Jy
! Component: 200  -  total flux cleaned = 7.36329e-06 Jy
! Total flux subtracted in 200 components = 7.36329e-06 Jy
! Clean residual min=-0.002318 max=0.002841 Jy/beam
! Clean residual mean=-0.000013 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.161051 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 137 components and 0.161051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097328Jy  sigma=0.779595
! Fit after  self-cal, rms=0.097329Jy  sigma=0.779585
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.436 mas, bmaj=10.17 mas, bpa=-8.089 degrees
! Estimated noise=0.767934 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.436 x 10.17 at -8.089 degrees (North through East)
! Clean map  min=-0.0021182  max=0.10779 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.701 mas, bmaj=8.345 mas, bpa=-10.13 degrees
! Estimated noise=1.13603 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.087139 Jy
! Component: 100  -  total flux cleaned = 0.11624 Jy
! Component: 150  -  total flux cleaned = 0.130666 Jy
! Component: 200  -  total flux cleaned = 0.139517 Jy
! Total flux subtracted in 200 components = 0.139517 Jy
! Clean residual min=-0.003985 max=0.005199 Jy/beam
! Clean residual mean=-0.000020 rms=0.001028 Jy/beam
! Combined flux in latest and established models = 0.139517 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.139517 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.436 mas, bmaj=10.17 mas, bpa=-8.089 degrees
! Estimated noise=0.767934 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00870448 Jy
! Component: 100  -  total flux cleaned = 0.013866 Jy
! Component: 150  -  total flux cleaned = 0.0171221 Jy
! Component: 200  -  total flux cleaned = 0.0190942 Jy
! Total flux subtracted in 200 components = 0.0190942 Jy
! Clean residual min=-0.002542 max=0.002699 Jy/beam
! Clean residual mean=-0.000009 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.158611 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 71 components and 0.158611 Jy
! Inverting map 
! Added new window around map position (-8, -27.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247857 Jy
! Component: 100  -  total flux cleaned = 0.00320992 Jy
! Component: 150  -  total flux cleaned = 0.00361483 Jy
! Component: 200  -  total flux cleaned = 0.00383606 Jy
! Total flux subtracted in 200 components = 0.00383606 Jy
! Clean residual min=-0.002148 max=0.002358 Jy/beam
! Clean residual mean=-0.000003 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.162447 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 99 components and 0.162447 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.023 mas, bmaj=19.94 mas, bpa=-3.345 degrees
! Estimated noise=0.900383 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000596336 Jy
! Component: 100  -  total flux cleaned = 0.000921637 Jy
! Component: 150  -  total flux cleaned = 0.00104081 Jy
! Component: 200  -  total flux cleaned = 0.00109463 Jy
! Total flux subtracted in 200 components = 0.00109463 Jy
! Clean residual min=-0.002087 max=0.002362 Jy/beam
! Clean residual mean=-0.000002 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.163542 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.91339e-05 Jy
! Component: 100  -  total flux cleaned = 9.50254e-05 Jy
! Component: 150  -  total flux cleaned = 0.000136863 Jy
! Component: 200  -  total flux cleaned = 0.00017619 Jy
! Total flux subtracted in 200 components = 0.00017619 Jy
! Clean residual min=-0.002057 max=0.002348 Jy/beam
! Clean residual mean=-0.000001 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.163718 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 142 components and 0.163718 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.436 mas, bmaj=10.17 mas, bpa=-8.089 degrees
! Estimated noise=0.767934 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00021266 Jy
! Component: 100  -  total flux cleaned = -0.000246278 Jy
! Component: 150  -  total flux cleaned = -0.000245513 Jy
! Component: 200  -  total flux cleaned = -0.000217781 Jy
! Total flux subtracted in 200 components = -0.000217781 Jy
! Clean residual min=-0.001995 max=0.002245 Jy/beam
! Clean residual mean=-0.000001 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.1635 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 159 components and 0.1635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097264Jy  sigma=0.778980
! Fit after  self-cal, rms=0.097261Jy  sigma=0.778829
wmodel J1524-3012_S_map.mod
! Writing 159 model components to file: J1524-3012_S_map.mod
wobs   J1524-3012_S_uvs.fits
! Writing UV FITS file: J1524-3012_S_uvs.fits
wwins  J1524-3012_S_map.win
! wwins: Wrote 4 windows to J1524-3012_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000986387 Jy
! Component: 100  -  total flux cleaned = 0.00143406 Jy
! Component: 150  -  total flux cleaned = 0.00160966 Jy
! Component: 200  -  total flux cleaned = 0.00171149 Jy
! Component: 250  -  total flux cleaned = 0.00167942 Jy
! Component: 300  -  total flux cleaned = 0.00161599 Jy
! Component: 350  -  total flux cleaned = 0.0014908 Jy
! Component: 400  -  total flux cleaned = 0.00133785 Jy
! Component: 450  -  total flux cleaned = 0.00115921 Jy
! Component: 500  -  total flux cleaned = 0.0010425 Jy
! Component: 550  -  total flux cleaned = 0.000956456 Jy
! Component: 600  -  total flux cleaned = 0.000843607 Jy
! Component: 650  -  total flux cleaned = 0.000760482 Jy
! Component: 700  -  total flux cleaned = 0.000705846 Jy
! Component: 750  -  total flux cleaned = 0.000598753 Jy
! Component: 800  -  total flux cleaned = 0.000572456 Jy
! Component: 850  -  total flux cleaned = 0.000494944 Jy
! Component: 900  -  total flux cleaned = 0.000469468 Jy
! Component: 950  -  total flux cleaned = 0.000544761 Jy
! Component: 1000  -  total flux cleaned = 0.000543936 Jy
! Component: 1050  -  total flux cleaned = 0.000445925 Jy
! Component: 1100  -  total flux cleaned = 0.000421858 Jy
! Component: 1150  -  total flux cleaned = 0.000445581 Jy
! Component: 1200  -  total flux cleaned = 0.000445606 Jy
! Component: 1250  -  total flux cleaned = 0.000422212 Jy
! Component: 1300  -  total flux cleaned = 0.000422206 Jy
! Component: 1350  -  total flux cleaned = 0.000444624 Jy
! Component: 1400  -  total flux cleaned = 0.000422557 Jy
! Component: 1450  -  total flux cleaned = 0.000466622 Jy
! Component: 1500  -  total flux cleaned = 0.000401147 Jy
! Component: 1550  -  total flux cleaned = 0.000400912 Jy
! Component: 1600  -  total flux cleaned = 0.000422842 Jy
! Component: 1650  -  total flux cleaned = 0.000465048 Jy
! Component: 1700  -  total flux cleaned = 0.000506784 Jy
! Component: 1750  -  total flux cleaned = 0.00044446 Jy
! Component: 1800  -  total flux cleaned = 0.000423993 Jy
! Component: 1850  -  total flux cleaned = 0.000464772 Jy
! Component: 1900  -  total flux cleaned = 0.000444885 Jy
! Component: 1950  -  total flux cleaned = 0.000465309 Jy
! Component: 2000  -  total flux cleaned = 0.000525042 Jy
! Component: 2050  -  total flux cleaned = 0.000564446 Jy
! Component: 2100  -  total flux cleaned = 0.000564829 Jy
! Component: 2150  -  total flux cleaned = 0.000622673 Jy
! Component: 2200  -  total flux cleaned = 0.000642001 Jy
! Component: 2250  -  total flux cleaned = 0.00056654 Jy
! Component: 2300  -  total flux cleaned = 0.000641948 Jy
! Component: 2350  -  total flux cleaned = 0.000642219 Jy
! Component: 2400  -  total flux cleaned = 0.000660809 Jy
! Component: 2450  -  total flux cleaned = 0.000770622 Jy
! Component: 2500  -  total flux cleaned = 0.000734411 Jy
! Component: 2550  -  total flux cleaned = 0.000770438 Jy
! Component: 2600  -  total flux cleaned = 0.00075252 Jy
! Component: 2650  -  total flux cleaned = 0.000787951 Jy
! Component: 2700  -  total flux cleaned = 0.000840794 Jy
! Component: 2750  -  total flux cleaned = 0.000805795 Jy
! Component: 2800  -  total flux cleaned = 0.000857997 Jy
! Component: 2850  -  total flux cleaned = 0.000978591 Jy
! Component: 2900  -  total flux cleaned = 0.000944358 Jy
! Component: 2950  -  total flux cleaned = 0.00104631 Jy
! Component: 3000  -  total flux cleaned = 0.00106302 Jy
! Component: 3050  -  total flux cleaned = 0.00107975 Jy
! Component: 3100  -  total flux cleaned = 0.00111303 Jy
! Component: 3150  -  total flux cleaned = 0.00109653 Jy
! Component: 3200  -  total flux cleaned = 0.00112937 Jy
! Component: 3250  -  total flux cleaned = 0.00111266 Jy
! Component: 3300  -  total flux cleaned = 0.00109657 Jy
! Component: 3350  -  total flux cleaned = 0.00109663 Jy
! Component: 3400  -  total flux cleaned = 0.00106465 Jy
! Component: 3450  -  total flux cleaned = 0.00103308 Jy
! Component: 3500  -  total flux cleaned = 0.0010173 Jy
! Component: 3550  -  total flux cleaned = 0.00101732 Jy
! Component: 3600  -  total flux cleaned = 0.00106409 Jy
! Component: 3650  -  total flux cleaned = 0.00104849 Jy
! Component: 3700  -  total flux cleaned = 0.00100215 Jy
! Component: 3750  -  total flux cleaned = 0.000940935 Jy
! Component: 3800  -  total flux cleaned = 0.00097129 Jy
! Component: 3850  -  total flux cleaned = 0.000971425 Jy
! Component: 3900  -  total flux cleaned = 0.000941367 Jy
! Component: 3950  -  total flux cleaned = 0.000971351 Jy
! Component: 4000  -  total flux cleaned = 0.000941618 Jy
! Component: 4050  -  total flux cleaned = 0.00100094 Jy
! Total flux subtracted in 4096 components = 0.000971492 Jy
! Clean residual min=-0.001010 max=0.000906 Jy/beam
! Clean residual mean=0.000001 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.164472 Jy
keep
! Adding 297 model components to the UV plane model.
! The established model now contains 456 components and 0.164472 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J1524-3012_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.436 x 10.17 at -8.089 degrees (North through East)
! Clean map  min=-0.0018039  max=0.10864 Jy/beam
! Writing clean map to FITS file: J1524-3012_S_map.fits
wmodel J1524-3012_S_map.mod
! Writing 456 model components to file: J1524-3012_S_map.mod
wobs   J1524-3012_S_uvs.fits
! Writing UV FITS file: J1524-3012_S_uvs.fits
wwins  J1524-3012_S_map.win
! wwins: Wrote 5 windows to J1524-3012_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.108643 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00028601 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.789773 0.789773 1.57955 3.15909 6.31818 12.6364 25.2727 50.5455
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.108 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  379.856 
quit
! Quitting program
! Log file J1524-3012_S_dfm.log closed on Fri Feb 15 19:55:06 2019