! Started logfile: /vlbi/bp222/temp_maps//J1522-2730_X_dfm.log on Thu Feb 14 22:59:36 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1522-2730_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1522-2730_X_uvm.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! AN table 2: 14 integrations on 21 of 21 possible baselines. ! AN table 3: 44 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.894816 visibilities/baseline/integration-bin. ! Found source: J1522-2730 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 28380 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1522-2730_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.189551Jy sigma=12.812620 ! Fit after self-cal, rms=0.449852Jy sigma=5.045651 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6385 mas, bmaj=1.719 mas, bpa=-4.642 degrees ! Estimated noise=0.792582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.434555 Jy ! Component: 100 - total flux cleaned = 0.542871 Jy ! Total flux subtracted in 100 components = 0.542871 Jy ! Clean residual min=-0.053143 max=0.061040 Jy/beam ! Clean residual mean=-0.000280 rms=0.006967 Jy/beam ! Combined flux in latest and established models = 0.542871 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.542871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.217845Jy sigma=2.317412 ! Fit after self-cal, rms=0.217791Jy sigma=2.317177 ! Inverting map ! Added new window around map position (-1.2, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0622955 Jy ! Component: 100 - total flux cleaned = 0.102868 Jy ! Total flux subtracted in 100 components = 0.102868 Jy ! Clean residual min=-0.051137 max=0.047667 Jy/beam ! Clean residual mean=-0.000199 rms=0.005985 Jy/beam ! Combined flux in latest and established models = 0.64574 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.64574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.191973Jy sigma=2.045967 ! Fit after self-cal, rms=0.191327Jy sigma=2.037894 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8337 mas, bmaj=2.161 mas, bpa=-4.658 degrees ! Estimated noise=0.422094 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392062 Jy ! Component: 100 - total flux cleaned = 0.0593544 Jy ! Component: 150 - total flux cleaned = 0.069961 Jy ! Component: 200 - total flux cleaned = 0.0724388 Jy ! Total flux subtracted in 200 components = 0.0724388 Jy ! Clean residual min=-0.053570 max=0.041130 Jy/beam ! Clean residual mean=-0.000269 rms=0.009433 Jy/beam ! Combined flux in latest and established models = 0.718178 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 30 components and 0.718178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.182144Jy sigma=1.973018 ! Fit after self-cal, rms=0.181596Jy sigma=1.963916 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8337 x 2.161 at -4.658 degrees (North through East) ! Clean map min=-0.048931 max=0.56011 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.18 HN 2.08 KP 1.20 ! LA 1.17 MK 1.09 NL 1.22 OV 1.19 ! PT 1.27 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.99 LA 1.01 MK 0.95 ! NL 1.14 OV 1.01 PT 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.85 FD 0.86 HN 0.93 KP 0.89 ! LA 0.87 MK 0.99 NL 1.07 PT 0.83 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.17 HN 2.03 KP 1.21 ! LA 1.18 MK 1.08 NL 1.23 OV 1.18 ! PT 1.26 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.01 LA 0.99 MK 0.95 ! NL 1.23 OV 1.00 PT 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.85 FD 0.86 HN 0.92 KP 0.89 ! LA 0.88 MK 0.99 NL 1.08 PT 0.83 ! SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.17 HN 2.02 KP 1.21 ! LA 1.17 MK 1.08 NL 1.23 OV 1.18 ! PT 1.26 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 LA 1.00 MK 0.97 ! NL 1.18 OV 0.99 PT 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.85 FD 0.86 HN 0.91 KP 0.90 ! LA 0.87 MK 0.99 NL 1.07 PT 0.84 ! SC 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.19 HN 2.00 KP 1.20 ! LA 1.17 MK 1.11 NL 1.22 OV 1.16 ! PT 1.26 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.02 LA 1.01 MK 0.98 ! NL 1.20 OV 1.00 PT 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.85 FD 0.86 HN 0.94 KP 0.89 ! LA 0.88 MK 1.00 NL 1.07 PT 0.84 ! SC 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.17 HN 2.06 KP 1.21 ! LA 1.18 MK 1.10 NL 1.23 OV 1.19 ! PT 1.28 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.01 LA 1.00 MK 0.95 ! NL 1.20 OV 1.00 PT 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.84 FD 0.87 HN 0.93 KP 0.90 ! LA 0.88 MK 1.01 NL 1.08 PT 0.84 ! SC 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.18 HN 2.03 KP 1.21 ! LA 1.19 MK 1.08 NL 1.19 OV 1.16 ! PT 1.29 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.02 LA 0.98 MK 0.96 ! NL 1.21 OV 0.99 PT 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.86 FD 0.87 HN 0.92 KP 0.90 ! LA 0.89 MK 1.01 NL 1.08 PT 0.84 ! SC 0.91 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.17 HN 2.02 KP 1.20 ! LA 1.19 MK 1.10 NL 1.21 OV 1.19 ! PT 1.25 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 LA 0.99 MK 0.96 ! NL 1.17 OV 1.01 PT 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.85 FD 0.87 HN 0.93 KP 0.90 ! LA 0.89 MK 1.01 NL 1.08 PT 0.84 ! SC 0.92 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.17 HN 2.15 KP 1.19 ! LA 1.18 MK 1.10 NL 1.24 OV 1.17 ! PT 1.28 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 LA 1.04 MK 0.93 ! NL 1.17 OV 1.00 PT 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.86 FD 0.87 HN 0.92 KP 0.90 ! LA 0.89 MK 1.00 NL 1.09 PT 0.85 ! SC 0.92 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.17 HN 2.00 KP 1.21 ! LA 1.18 MK 1.10 NL 1.19 OV 1.21 ! PT 1.26 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 LA 1.01 MK 0.94 ! NL 1.21 OV 0.98 PT 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.84 FD 0.87 HN 0.92 KP 0.90 ! LA 0.90 MK 1.02 NL 1.09 PT 0.84 ! SC 0.93 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.17 HN 2.01 KP 1.22 ! LA 1.18 MK 1.10 NL 1.22 OV 1.18 ! PT 1.27 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.04 LA 1.00 MK 0.92 ! NL 1.19 OV 0.99 PT 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.85 FD 0.87 HN 0.93 KP 0.90 ! LA 0.89 MK 1.01 NL 1.09 PT 0.84 ! SC 0.93 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.17 HN 1.92 KP 1.23 ! LA 1.15 MK 1.09 NL 1.24 OV 1.16 ! PT 1.28 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.01 LA 1.01 MK 0.99 ! NL 1.21 OV 1.00 PT 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.85 FD 0.87 HN 0.91 KP 0.91 ! LA 0.89 MK 1.02 NL 1.09 PT 0.85 ! SC 0.94 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.17 HN 2.13 KP 1.20 ! LA 1.20 MK 1.08 NL 1.20 OV 1.16 ! PT 1.27 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 LA 1.03 MK 0.93 ! NL 1.21 OV 0.98 PT 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.85 FD 0.87 HN 0.91 KP 0.89 ! LA 0.89 MK 1.01 NL 1.09 PT 0.84 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.181596Jy sigma=1.963916 ! Fit after self-cal, rms=0.111103Jy sigma=0.837436 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8414 mas, bmaj=2.172 mas, bpa=-5.048 degrees ! Estimated noise=0.42606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0115384 Jy ! Component: 100 - total flux cleaned = -0.011851 Jy ! Component: 150 - total flux cleaned = -0.0113378 Jy ! Component: 200 - total flux cleaned = -0.0109003 Jy ! Total flux subtracted in 200 components = -0.0109003 Jy ! Clean residual min=-0.007815 max=0.010966 Jy/beam ! Clean residual mean=-0.000013 rms=0.001538 Jy/beam ! Combined flux in latest and established models = 0.707278 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.707278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107036Jy sigma=0.808974 ! Fit after self-cal, rms=0.106517Jy sigma=0.800751 ! Inverting map ! Added new window around map position (-1.2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158502 Jy ! Component: 100 - total flux cleaned = 0.00102306 Jy ! Component: 150 - total flux cleaned = 0.00102378 Jy ! Component: 200 - total flux cleaned = 0.00102459 Jy ! Total flux subtracted in 200 components = 0.00102459 Jy ! Clean residual min=-0.006619 max=0.008286 Jy/beam ! Clean residual mean=-0.000010 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.708303 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 53 components and 0.708303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104762Jy sigma=0.786439 ! Fit after self-cal, rms=0.104620Jy sigma=0.784966 ! Inverting map ! Added new window around map position (1.4, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593717 Jy ! Component: 100 - total flux cleaned = 0.00636 Jy ! Component: 150 - total flux cleaned = 0.00619368 Jy ! Component: 200 - total flux cleaned = 0.00603402 Jy ! Total flux subtracted in 200 components = 0.00603402 Jy ! Clean residual min=-0.006342 max=0.007400 Jy/beam ! Clean residual mean=-0.000004 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.714337 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 66 components and 0.714337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103707Jy sigma=0.774208 ! Fit after self-cal, rms=0.103583Jy sigma=0.772581 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103583Jy sigma=0.772581 ! Fit after self-cal, rms=0.103612Jy sigma=0.755357 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8382 mas, bmaj=2.164 mas, bpa=-5.075 degrees ! Estimated noise=0.42417 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00273591 Jy ! Component: 100 - total flux cleaned = -0.00273745 Jy ! Component: 150 - total flux cleaned = -0.0028935 Jy ! Component: 200 - total flux cleaned = -0.00327402 Jy ! Total flux subtracted in 200 components = -0.00327402 Jy ! Clean residual min=-0.005498 max=0.004672 Jy/beam ! Clean residual mean=0.000001 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.711063 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.711063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102392Jy sigma=0.746519 ! Fit after self-cal, rms=0.102285Jy sigma=0.744825 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000830686 Jy ! Component: 100 - total flux cleaned = -0.000470565 Jy ! Component: 150 - total flux cleaned = -0.00057584 Jy ! Component: 200 - total flux cleaned = -0.000573875 Jy ! Total flux subtracted in 200 components = -0.000573875 Jy ! Clean residual min=-0.005117 max=0.004604 Jy/beam ! Clean residual mean=-0.000001 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.710489 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 0.710489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101933Jy sigma=0.742167 ! Fit after self-cal, rms=0.101903Jy sigma=0.741734 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101903Jy sigma=0.741734 ! Fit after self-cal, rms=0.101620Jy sigma=0.726215 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8366 mas, bmaj=2.164 mas, bpa=-5.043 degrees ! Estimated noise=0.423338 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00161461 Jy ! Component: 100 - total flux cleaned = -0.00197952 Jy ! Component: 150 - total flux cleaned = -0.00238907 Jy ! Component: 200 - total flux cleaned = -0.00257068 Jy ! Total flux subtracted in 200 components = -0.00257068 Jy ! Clean residual min=-0.003817 max=0.002997 Jy/beam ! Clean residual mean=0.000002 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.707918 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 0.707918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101199Jy sigma=0.722789 ! Fit after self-cal, rms=0.101177Jy sigma=0.722320 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000392593 Jy ! Component: 100 - total flux cleaned = -0.000396153 Jy ! Component: 150 - total flux cleaned = -0.000398522 Jy ! Component: 200 - total flux cleaned = -0.00040068 Jy ! Total flux subtracted in 200 components = -0.00040068 Jy ! Clean residual min=-0.003572 max=0.002779 Jy/beam ! Clean residual mean=0.000001 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.707518 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 97 components and 0.707518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101005Jy sigma=0.720878 ! Fit after self-cal, rms=0.100989Jy sigma=0.720732 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100989Jy sigma=0.720732 ! Fit after self-cal, rms=0.101304Jy sigma=0.719632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.295 mas, bmaj=5.102 mas, bpa=-0.504 degrees ! Estimated noise=0.535817 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000252236 Jy ! Component: 100 - total flux cleaned = -0.000655048 Jy ! Component: 150 - total flux cleaned = -0.000774972 Jy ! Component: 200 - total flux cleaned = -0.000929131 Jy ! Total flux subtracted in 200 components = -0.000929131 Jy ! Clean residual min=-0.002484 max=0.002644 Jy/beam ! Clean residual mean=0.000009 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.706588 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 108 components and 0.706588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101195Jy sigma=0.718647 ! Fit after self-cal, rms=0.101174Jy sigma=0.718384 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236479 Jy ! Component: 100 - total flux cleaned = 0.000234713 Jy ! Component: 150 - total flux cleaned = 0.000238178 Jy ! Component: 200 - total flux cleaned = 0.000200584 Jy ! Total flux subtracted in 200 components = 0.000200584 Jy ! Clean residual min=-0.002415 max=0.002531 Jy/beam ! Clean residual mean=0.000009 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.706789 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 116 components and 0.706789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101129Jy sigma=0.717933 ! Fit after self-cal, rms=0.101121Jy sigma=0.717840 ! Inverting map ! Added new window around map position (-41.6, -37.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000871614 Jy ! Component: 100 - total flux cleaned = 0.00047666 Jy ! Component: 150 - total flux cleaned = 0.000300933 Jy ! Component: 200 - total flux cleaned = 9.7106e-05 Jy ! Total flux subtracted in 200 components = 9.7106e-05 Jy ! Clean residual min=-0.002146 max=0.001950 Jy/beam ! Clean residual mean=0.000003 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.706886 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 140 components and 0.706886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101050Jy sigma=0.717149 ! Fit after self-cal, rms=0.101052Jy sigma=0.717084 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.836 mas, bmaj=2.164 mas, bpa=-5.036 degrees ! Estimated noise=0.422728 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.836 x 2.164 at -5.036 degrees (North through East) ! Clean map min=-0.0026294 max=0.56894 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101052Jy sigma=0.717084 ! Fit after self-cal, rms=0.100878Jy sigma=0.656426 ! Inverting map and beam ! Estimated beam: bmin=0.836 mas, bmaj=2.166 mas, bpa=-5.07 degrees ! Estimated noise=0.422308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103832 Jy ! Component: 100 - total flux cleaned = -0.00104062 Jy ! Component: 150 - total flux cleaned = -0.00104024 Jy ! Component: 200 - total flux cleaned = -0.00110208 Jy ! Total flux subtracted in 200 components = -0.00110208 Jy ! Clean residual min=-0.002736 max=0.002259 Jy/beam ! Clean residual mean=0.000001 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.705784 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 156 components and 0.705784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100726Jy sigma=0.655109 ! Fit after self-cal, rms=0.100711Jy sigma=0.655003 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.50753e-05 Jy ! Component: 100 - total flux cleaned = 0.000112054 Jy ! Component: 150 - total flux cleaned = 1.36753e-06 Jy ! Component: 200 - total flux cleaned = -5.04531e-05 Jy ! Total flux subtracted in 200 components = -5.04531e-05 Jy ! Clean residual min=-0.002581 max=0.002102 Jy/beam ! Clean residual mean=0.000001 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.705734 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 163 components and 0.705734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100628Jy sigma=0.654280 ! Fit after self-cal, rms=0.100620Jy sigma=0.654227 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100620Jy sigma=0.654227 ! Fit after self-cal, rms=0.100903Jy sigma=0.653840 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6414 mas, bmaj=1.732 mas, bpa=-5.005 degrees ! Estimated noise=0.782797 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.429013 Jy ! Component: 100 - total flux cleaned = 0.534162 Jy ! Component: 150 - total flux cleaned = 0.585568 Jy ! Component: 200 - total flux cleaned = 0.616512 Jy ! Total flux subtracted in 200 components = 0.616512 Jy ! Clean residual min=-0.005977 max=0.016562 Jy/beam ! Clean residual mean=-0.000080 rms=0.001672 Jy/beam ! Combined flux in latest and established models = 0.616512 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.616512 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8359 mas, bmaj=2.166 mas, bpa=-5.044 degrees ! Estimated noise=0.421988 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0344252 Jy ! Component: 100 - total flux cleaned = 0.0528172 Jy ! Component: 150 - total flux cleaned = 0.0634515 Jy ! Component: 200 - total flux cleaned = 0.0704091 Jy ! Total flux subtracted in 200 components = 0.0704091 Jy ! Clean residual min=-0.002883 max=0.004146 Jy/beam ! Clean residual mean=-0.000025 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.686921 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 56 components and 0.686921 Jy ! Inverting map ! Added new window around map position (0.6, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488113 Jy ! Component: 100 - total flux cleaned = 0.00839915 Jy ! Component: 150 - total flux cleaned = 0.0100866 Jy ! Component: 200 - total flux cleaned = 0.0114172 Jy ! Total flux subtracted in 200 components = 0.0114172 Jy ! Clean residual min=-0.002221 max=0.002314 Jy/beam ! Clean residual mean=-0.000007 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.698338 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 84 components and 0.698338 Jy ! Inverting map ! Added new window around map position (-3.8, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189395 Jy ! Component: 100 - total flux cleaned = 0.00263042 Jy ! Component: 150 - total flux cleaned = 0.00323009 Jy ! Component: 200 - total flux cleaned = 0.00353828 Jy ! Total flux subtracted in 200 components = 0.00353828 Jy ! Clean residual min=-0.001959 max=0.001908 Jy/beam ! Clean residual mean=-0.000003 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.701876 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 111 components and 0.701876 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.294 mas, bmaj=5.105 mas, bpa=-0.5805 degrees ! Estimated noise=0.534968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115293 Jy ! Component: 100 - total flux cleaned = 0.00133505 Jy ! Component: 150 - total flux cleaned = 0.00153124 Jy ! Component: 200 - total flux cleaned = 0.00170474 Jy ! Total flux subtracted in 200 components = 0.00170474 Jy ! Clean residual min=-0.001862 max=0.001589 Jy/beam ! Clean residual mean=-0.000001 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.703581 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124692 Jy ! Component: 100 - total flux cleaned = 0.000124682 Jy ! Component: 150 - total flux cleaned = 0.000153191 Jy ! Component: 200 - total flux cleaned = 0.000126786 Jy ! Total flux subtracted in 200 components = 0.000126786 Jy ! Clean residual min=-0.001824 max=0.001593 Jy/beam ! Clean residual mean=-0.000001 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.703707 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 156 components and 0.703707 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8359 mas, bmaj=2.166 mas, bpa=-5.044 degrees ! Estimated noise=0.421988 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000746102 Jy ! Component: 100 - total flux cleaned = -0.000748742 Jy ! Component: 150 - total flux cleaned = -0.000657151 Jy ! Component: 200 - total flux cleaned = -0.000478369 Jy ! Total flux subtracted in 200 components = -0.000478369 Jy ! Clean residual min=-0.001971 max=0.001728 Jy/beam ! Clean residual mean=-0.000001 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.703229 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 173 components and 0.703229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100426Jy sigma=0.651321 ! Fit after self-cal, rms=0.100362Jy sigma=0.650415 wmodel J1522-2730_X_map.mod ! Writing 173 model components to file: J1522-2730_X_map.mod wobs J1522-2730_X_uvs.fits ! Writing UV FITS file: J1522-2730_X_uvs.fits wwins J1522-2730_X_map.win ! wwins: Wrote 7 windows to J1522-2730_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000227256 Jy ! Component: 100 - total flux cleaned = 0.000465263 Jy ! Component: 150 - total flux cleaned = 0.000605802 Jy ! Component: 200 - total flux cleaned = 0.000632191 Jy ! Component: 250 - total flux cleaned = 0.000659148 Jy ! Component: 300 - total flux cleaned = 0.000608208 Jy ! Component: 350 - total flux cleaned = 0.000533506 Jy ! Component: 400 - total flux cleaned = 0.000582976 Jy ! Component: 450 - total flux cleaned = 0.000630796 Jy ! Component: 500 - total flux cleaned = 0.000535986 Jy ! Component: 550 - total flux cleaned = 0.000535721 Jy ! Component: 600 - total flux cleaned = 0.000489751 Jy ! Component: 650 - total flux cleaned = 0.000400199 Jy ! Component: 700 - total flux cleaned = 0.000422223 Jy ! Component: 750 - total flux cleaned = 0.000356801 Jy ! Component: 800 - total flux cleaned = 0.000335564 Jy ! Component: 850 - total flux cleaned = 0.000398951 Jy ! Component: 900 - total flux cleaned = 0.000273362 Jy ! Component: 950 - total flux cleaned = 0.000252772 Jy ! Component: 1000 - total flux cleaned = 0.000191708 Jy ! Component: 1050 - total flux cleaned = 0.000151358 Jy ! Component: 1100 - total flux cleaned = 0.000171135 Jy ! Component: 1150 - total flux cleaned = 9.20768e-05 Jy ! Component: 1200 - total flux cleaned = 7.26401e-05 Jy ! Component: 1250 - total flux cleaned = 3.39727e-05 Jy ! Component: 1300 - total flux cleaned = -4.43136e-06 Jy ! Component: 1350 - total flux cleaned = -4.59596e-06 Jy ! Component: 1400 - total flux cleaned = -6.12004e-05 Jy ! Component: 1450 - total flux cleaned = -4.2343e-05 Jy ! Component: 1500 - total flux cleaned = -9.76204e-05 Jy ! Component: 1550 - total flux cleaned = -0.000152308 Jy ! Component: 1600 - total flux cleaned = -9.81333e-05 Jy ! Component: 1650 - total flux cleaned = -0.000151916 Jy ! Component: 1700 - total flux cleaned = -9.87411e-05 Jy ! Component: 1750 - total flux cleaned = -0.000204415 Jy ! Component: 1800 - total flux cleaned = -0.000186938 Jy ! Component: 1850 - total flux cleaned = -0.000134643 Jy ! Component: 1900 - total flux cleaned = -0.00011763 Jy ! Component: 1950 - total flux cleaned = -0.000168899 Jy ! Component: 2000 - total flux cleaned = -0.000135003 Jy ! Component: 2050 - total flux cleaned = -0.000135134 Jy ! Component: 2100 - total flux cleaned = -0.000235182 Jy ! Component: 2150 - total flux cleaned = -0.000152453 Jy ! Component: 2200 - total flux cleaned = -0.000152277 Jy ! Component: 2250 - total flux cleaned = -0.000152116 Jy ! Component: 2300 - total flux cleaned = -0.000135989 Jy ! Component: 2350 - total flux cleaned = -8.77453e-05 Jy ! Component: 2400 - total flux cleaned = -0.000103921 Jy ! Component: 2450 - total flux cleaned = -4.06309e-05 Jy ! Component: 2500 - total flux cleaned = -0.000135189 Jy ! Component: 2550 - total flux cleaned = -5.6963e-05 Jy ! Component: 2600 - total flux cleaned = -7.25918e-05 Jy ! Component: 2650 - total flux cleaned = -0.000118796 Jy ! Component: 2700 - total flux cleaned = -4.20264e-05 Jy ! Component: 2750 - total flux cleaned = -8.77069e-05 Jy ! Component: 2800 - total flux cleaned = -8.7573e-05 Jy ! Component: 2850 - total flux cleaned = -0.000102506 Jy ! Component: 2900 - total flux cleaned = -8.73991e-05 Jy ! Component: 2950 - total flux cleaned = -8.74418e-05 Jy ! Component: 3000 - total flux cleaned = -8.75047e-05 Jy ! Component: 3050 - total flux cleaned = -5.81193e-05 Jy ! Component: 3100 - total flux cleaned = -8.72193e-05 Jy ! Component: 3150 - total flux cleaned = -4.36541e-05 Jy ! Component: 3200 - total flux cleaned = -7.24475e-05 Jy ! Component: 3250 - total flux cleaned = -1.51176e-05 Jy ! Component: 3300 - total flux cleaned = -8.92675e-07 Jy ! Component: 3350 - total flux cleaned = -1.50478e-05 Jy ! Component: 3400 - total flux cleaned = -9.46246e-07 Jy ! Component: 3450 - total flux cleaned = -8.8041e-07 Jy ! Component: 3500 - total flux cleaned = 5.47758e-05 Jy ! Component: 3550 - total flux cleaned = 6.86099e-05 Jy ! Component: 3600 - total flux cleaned = 2.72654e-05 Jy ! Component: 3650 - total flux cleaned = 2.72965e-05 Jy ! Component: 3700 - total flux cleaned = 2.74432e-05 Jy ! Component: 3750 - total flux cleaned = 3.9836e-07 Jy ! Component: 3800 - total flux cleaned = -1.30746e-05 Jy ! Component: 3850 - total flux cleaned = 2.72062e-05 Jy ! Component: 3900 - total flux cleaned = 5.23137e-07 Jy ! Component: 3950 - total flux cleaned = 1.38167e-05 Jy ! Component: 4000 - total flux cleaned = -2.58249e-05 Jy ! Component: 4050 - total flux cleaned = -3.88681e-05 Jy ! Total flux subtracted in 4096 components = -3.88244e-05 Jy ! Clean residual min=-0.000825 max=0.000680 Jy/beam ! Clean residual mean=0.000003 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.70319 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 453 components and 0.703191 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1522-2730_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8359 x 2.166 at -5.044 degrees (North through East) ! Clean map min=-0.002228 max=0.57394 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1522-2730_X_map.fits wmodel /vlbi/bp222/temp_maps//J1522-2730_X_map.mod ! Writing 453 model components to file: /vlbi/bp222/temp_maps//J1522-2730_X_map.mod wobs /vlbi/bp222/temp_maps//J1522-2730_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1522-2730_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1522-2730_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/temp_maps//J1522-2730_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.573939 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000226404 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.118342 0.118342 0.236685 0.473369 0.946738 1.89348 3.78695 7.57391 15.1478 30.2956 60.5913 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.573 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2535.02 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1522-2730_X_dfm.log closed on Thu Feb 14 22:59:43 2019