! Started logfile: /vlbi/bp222/temp_maps//J1501-3828_X_dfm.log on Thu Feb 14 22:58:14 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1501-3828_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1501-3828_X_uvm.fits ! AN table 1: 24 integrations on 21 of 21 possible baselines. ! AN table 2: 46 integrations on 28 of 28 possible baselines. ! AN table 3: 48 integrations on 28 of 28 possible baselines. ! AN table 4: 113 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.791141 visibilities/baseline/integration-bin. ! Found source: J1501-3828 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 45864 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1501-3828_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 128 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 128 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 128 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 128 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 128 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 128 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 128 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 128 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 128 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 128 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 128 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 128 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.007630Jy sigma=11.219433 ! Fit after self-cal, rms=0.905916Jy sigma=10.002621 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6029 mas, bmaj=1.881 mas, bpa=-7.668 degrees ! Estimated noise=0.692984 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0763106 Jy ! Component: 100 - total flux cleaned = 0.0992878 Jy ! Total flux subtracted in 100 components = 0.0992878 Jy ! Clean residual min=-0.004893 max=0.009595 Jy/beam ! Clean residual mean=0.000013 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.0992878 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0992878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088348Jy sigma=0.842081 ! Fit after self-cal, rms=0.087994Jy sigma=0.838638 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100903 Jy ! Component: 100 - total flux cleaned = 0.0125316 Jy ! Total flux subtracted in 100 components = 0.0125316 Jy ! Clean residual min=-0.003754 max=0.007075 Jy/beam ! Clean residual mean=0.000009 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.111819 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 0.111819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087272Jy sigma=0.820129 ! Fit after self-cal, rms=0.087260Jy sigma=0.820010 ! Inverting map ! Added new window around map position (1.6, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00550009 Jy ! Component: 100 - total flux cleaned = 0.00696696 Jy ! Total flux subtracted in 100 components = 0.00696696 Jy ! Clean residual min=-0.003956 max=0.006296 Jy/beam ! Clean residual mean=0.000007 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.118786 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.118786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086893Jy sigma=0.815659 ! Fit after self-cal, rms=0.086866Jy sigma=0.814409 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8196 mas, bmaj=2.511 mas, bpa=-10.74 degrees ! Estimated noise=0.311778 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543326 Jy ! Component: 100 - total flux cleaned = 0.00838801 Jy ! Component: 150 - total flux cleaned = 0.00939649 Jy ! Component: 200 - total flux cleaned = 0.00980711 Jy ! Total flux subtracted in 200 components = 0.00980711 Jy ! Clean residual min=-0.004195 max=0.004388 Jy/beam ! Clean residual mean=0.000007 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.128593 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 43 components and 0.128593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086485Jy sigma=0.809785 ! Fit after self-cal, rms=0.086482Jy sigma=0.809443 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8196 x 2.511 at -10.74 degrees (North through East) ! Clean map min=-0.0037354 max=0.096228 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.14 HN 1.34 KP 1.14 LA 1.03 ! NL 1.39 PT 0.89 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.13 KP 1.02 MK 1.10 ! NL 1.20 OV 0.92 PT 0.97 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 KP 1.08 LA 1.04 MK 1.06 ! NL 1.20 OV 0.91 PT 0.98 SC 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.89 HN 1.20 KP 1.10 MK 1.05 ! NL 0.90 OV 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.07 HN 1.38 KP 1.07 LA 1.08 ! NL 1.40 PT 0.97 SC 0.84 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 1.49 KP 1.04 MK 1.13 ! NL 1.08 OV 0.92 PT 1.01 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 KP 1.14 LA 1.03 MK 1.07 ! NL 1.25 OV 0.87 PT 0.96 SC 0.99 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.87 HN 1.17 KP 1.11 MK 1.03 ! NL 0.91 OV 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 1.40 KP 1.15 LA 1.07 ! NL 1.35 PT 0.91 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.16 KP 1.04 MK 1.16 ! NL 1.16 OV 0.94 PT 0.97 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 KP 1.06 LA 1.08 MK 1.03 ! NL 1.38 OV 0.84 PT 0.98 SC 1.06 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.86 HN 1.17 KP 1.09 MK 1.02 ! NL 0.91 OV 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 1.31 KP 1.19 LA 1.09 ! NL 1.31 PT 0.89 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 HN 1.18 KP 1.08 MK 1.09 ! NL 1.25 OV 0.89 PT 0.97 SC 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 KP 1.05 LA 1.05 MK 0.99 ! NL 1.22 OV 0.91 PT 1.00 SC 1.03 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.84 HN 1.07 KP 1.07 MK 1.07 ! NL 0.96 OV 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.29 KP 1.06 LA 1.08 ! NL 1.54 PT 0.94 SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 1.24 KP 1.03 MK 1.36 ! NL 1.10 OV 0.92 PT 1.01 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 KP 1.11 LA 1.03 MK 0.94 ! NL 1.17 OV 0.88 PT 1.03 SC 1.01 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.87 HN 1.22 KP 1.13 MK 0.93 ! NL 0.89 OV 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.11 KP 1.16 LA 1.06 ! NL 1.57 PT 0.93 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.17 KP 1.09 MK 0.97 ! NL 1.13 OV 0.90 PT 0.96 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 KP 1.10 LA 0.96 MK 1.05 ! NL 1.31 OV 0.86 PT 1.03 SC 1.01 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.88 HN 1.26 KP 1.09 MK 0.94 ! NL 0.87 OV 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 HN 1.14 KP 1.07 LA 1.10 ! NL 1.37 PT 0.87 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.15 KP 1.02 MK 1.21 ! NL 1.14 OV 0.92 PT 0.94 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 KP 1.05 LA 1.02 MK 1.12 ! NL 1.17 OV 0.91 PT 0.96 SC 0.99 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.86 HN 1.10 KP 1.08 MK 0.95 ! NL 0.88 OV 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 1.00 KP 1.12 LA 1.09 ! NL 1.38 PT 0.88 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.28 KP 1.09 MK 1.17 ! NL 1.23 OV 0.93 PT 0.97 SC 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 KP 1.09 LA 0.99 MK 0.97 ! NL 1.28 OV 0.87 PT 1.01 SC 0.98 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.86 HN 1.21 KP 1.10 MK 0.96 ! NL 0.89 OV 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 1.08 KP 1.17 LA 1.00 ! NL 1.41 PT 0.96 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 1.23 KP 1.01 MK 1.17 ! NL 1.12 OV 0.90 PT 0.99 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 KP 1.03 LA 1.05 MK 1.00 ! NL 1.20 OV 0.90 PT 1.03 SC 1.05 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.84 HN 1.15 KP 1.08 MK 0.88 ! NL 0.96 OV 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 1.20 KP 1.09 LA 1.02 ! NL 1.49 PT 0.94 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.29 KP 1.05 MK 0.97 ! NL 1.21 OV 0.84 PT 1.00 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 KP 1.04 LA 0.96 MK 0.92 ! NL 1.23 OV 0.91 PT 1.01 SC 1.01 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.86 HN 1.28 KP 1.09 MK 0.84 ! NL 0.94 OV 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 HN 1.14 KP 1.03 LA 1.07 ! NL 1.44 PT 0.90 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.90 HN 1.26 KP 1.02 MK 1.42 ! NL 1.08 OV 0.93 PT 0.95 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 KP 1.07 LA 1.03 MK 0.98 ! NL 1.23 OV 0.89 PT 0.98 SC 0.98 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.84 HN 1.06 KP 1.14 MK 0.83 ! NL 0.92 OV 0.93 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! FD 1.09 HN 1.00 KP 0.99 LA 1.07 ! NL 1.27 PT 0.88 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 HN 1.30 KP 1.01 MK 1.09 ! NL 1.09 OV 0.92 PT 0.93 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 KP 1.06 LA 1.07 MK 0.93 ! NL 1.19 OV 0.87 PT 0.95 SC 0.96 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.84 HN 1.03 KP 1.07 MK 0.87 ! NL 0.92 OV 0.94 ! ! ! Fit before self-cal, rms=0.086482Jy sigma=0.809443 ! Fit after self-cal, rms=0.094168Jy sigma=0.794721 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8199 mas, bmaj=2.499 mas, bpa=-10.61 degrees ! Estimated noise=0.315657 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151263 Jy ! Component: 100 - total flux cleaned = -0.00168565 Jy ! Component: 150 - total flux cleaned = -0.00186026 Jy ! Component: 200 - total flux cleaned = -0.0019189 Jy ! Total flux subtracted in 200 components = -0.0019189 Jy ! Clean residual min=-0.002815 max=0.003157 Jy/beam ! Clean residual mean=0.000003 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.126675 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.126675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094136Jy sigma=0.794188 ! Fit after self-cal, rms=0.094463Jy sigma=0.793486 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094463Jy sigma=0.793486 ! Fit after self-cal, rms=0.095690Jy sigma=0.791582 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8193 mas, bmaj=2.494 mas, bpa=-10.69 degrees ! Estimated noise=0.315271 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000928772 Jy ! Component: 100 - total flux cleaned = -0.00102292 Jy ! Component: 150 - total flux cleaned = -0.001102 Jy ! Component: 200 - total flux cleaned = -0.00112477 Jy ! Total flux subtracted in 200 components = -0.00112477 Jy ! Clean residual min=-0.002472 max=0.003021 Jy/beam ! Clean residual mean=0.000001 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.12555 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.12555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095676Jy sigma=0.791284 ! Fit after self-cal, rms=0.095759Jy sigma=0.791224 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.14931e-05 Jy ! Component: 100 - total flux cleaned = -9.1934e-05 Jy ! Component: 150 - total flux cleaned = -9.25973e-05 Jy ! Component: 200 - total flux cleaned = -0.000109452 Jy ! Total flux subtracted in 200 components = -0.000109452 Jy ! Clean residual min=-0.002471 max=0.002989 Jy/beam ! Clean residual mean=0.000001 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.12544 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 68 components and 0.12544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095752Jy sigma=0.791102 ! Fit after self-cal, rms=0.095761Jy sigma=0.791093 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095761Jy sigma=0.791093 ! Fit after self-cal, rms=0.100964Jy sigma=0.777451 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8205 mas, bmaj=2.498 mas, bpa=-10.62 degrees ! Estimated noise=0.315512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00019227 Jy ! Component: 100 - total flux cleaned = -0.000247117 Jy ! Component: 150 - total flux cleaned = -0.000262107 Jy ! Component: 200 - total flux cleaned = -0.000275967 Jy ! Total flux subtracted in 200 components = -0.000275967 Jy ! Clean residual min=-0.001194 max=0.001099 Jy/beam ! Clean residual mean=0.000003 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.125164 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.125164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100961Jy sigma=0.777360 ! Fit after self-cal, rms=0.101284Jy sigma=0.776692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.97436e-05 Jy ! Component: 100 - total flux cleaned = -4.94147e-05 Jy ! Component: 150 - total flux cleaned = -3.75899e-05 Jy ! Component: 200 - total flux cleaned = -3.71049e-05 Jy ! Total flux subtracted in 200 components = -3.71049e-05 Jy ! Clean residual min=-0.001323 max=0.001070 Jy/beam ! Clean residual mean=0.000003 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.125127 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 90 components and 0.125127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101280Jy sigma=0.776653 ! Fit after self-cal, rms=0.101284Jy sigma=0.776648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101284Jy sigma=0.776648 ! Fit after self-cal, rms=0.102623Jy sigma=0.776641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.13 mas, bmaj=7.395 mas, bpa=-8.569 degrees ! Estimated noise=0.39203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215765 Jy ! Component: 100 - total flux cleaned = -0.000236849 Jy ! Component: 150 - total flux cleaned = -0.000265124 Jy ! Component: 200 - total flux cleaned = -0.00027403 Jy ! Total flux subtracted in 200 components = -0.00027403 Jy ! Clean residual min=-0.001216 max=0.001170 Jy/beam ! Clean residual mean=0.000007 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.124853 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 101 components and 0.124853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102625Jy sigma=0.776632 ! Fit after self-cal, rms=0.102675Jy sigma=0.776605 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.70269e-07 Jy ! Component: 100 - total flux cleaned = -8.45544e-07 Jy ! Component: 150 - total flux cleaned = -9.21149e-06 Jy ! Component: 200 - total flux cleaned = -2.43554e-05 Jy ! Total flux subtracted in 200 components = -2.43554e-05 Jy ! Clean residual min=-0.001225 max=0.001172 Jy/beam ! Clean residual mean=0.000007 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.124829 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 103 components and 0.124829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102675Jy sigma=0.776603 ! Fit after self-cal, rms=0.102677Jy sigma=0.776600 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8198 mas, bmaj=2.494 mas, bpa=-10.61 degrees ! Estimated noise=0.315662 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8198 x 2.494 at -10.61 degrees (North through East) ! Clean map min=-0.0015737 max=0.097258 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6031 mas, bmaj=1.872 mas, bpa=-7.282 degrees ! Estimated noise=0.704271 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0771657 Jy ! Component: 100 - total flux cleaned = 0.100773 Jy ! Component: 150 - total flux cleaned = 0.110894 Jy ! Component: 200 - total flux cleaned = 0.115211 Jy ! Total flux subtracted in 200 components = 0.115211 Jy ! Clean residual min=-0.003488 max=0.003749 Jy/beam ! Clean residual mean=0.000004 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.11521 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.11521 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8198 mas, bmaj=2.494 mas, bpa=-10.61 degrees ! Estimated noise=0.315662 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403482 Jy ! Component: 100 - total flux cleaned = 0.00635094 Jy ! Component: 150 - total flux cleaned = 0.00714005 Jy ! Component: 200 - total flux cleaned = 0.00767125 Jy ! Total flux subtracted in 200 components = 0.00767125 Jy ! Clean residual min=-0.001445 max=0.001353 Jy/beam ! Clean residual mean=0.000005 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.122882 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 35 components and 0.122882 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.13 mas, bmaj=7.395 mas, bpa=-8.569 degrees ! Estimated noise=0.39203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110254 Jy ! Component: 100 - total flux cleaned = 0.0016345 Jy ! Component: 150 - total flux cleaned = 0.00172852 Jy ! Component: 200 - total flux cleaned = 0.00181964 Jy ! Total flux subtracted in 200 components = 0.00181964 Jy ! Clean residual min=-0.001122 max=0.001191 Jy/beam ! Clean residual mean=0.000007 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.124701 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.52861e-05 Jy ! Component: 100 - total flux cleaned = 0.000137703 Jy ! Component: 150 - total flux cleaned = 0.000168403 Jy ! Component: 200 - total flux cleaned = 0.000195128 Jy ! Total flux subtracted in 200 components = 0.000195128 Jy ! Clean residual min=-0.001120 max=0.001156 Jy/beam ! Clean residual mean=0.000007 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.124897 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.124897 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8198 mas, bmaj=2.494 mas, bpa=-10.61 degrees ! Estimated noise=0.315662 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232776 Jy ! Component: 100 - total flux cleaned = -0.000232798 Jy ! Component: 150 - total flux cleaned = -0.000232929 Jy ! Component: 200 - total flux cleaned = -0.000203482 Jy ! Total flux subtracted in 200 components = -0.000203482 Jy ! Clean residual min=-0.001130 max=0.001016 Jy/beam ! Clean residual mean=0.000004 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.124693 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 0.124693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102697Jy sigma=0.776849 ! Fit after self-cal, rms=0.102688Jy sigma=0.776752 wmodel J1501-3828_X_map.mod ! Writing 59 model components to file: J1501-3828_X_map.mod wobs J1501-3828_X_uvs.fits ! Writing UV FITS file: J1501-3828_X_uvs.fits wwins J1501-3828_X_map.win ! wwins: Wrote 3 windows to J1501-3828_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.74477e-05 Jy ! Component: 100 - total flux cleaned = -8.65344e-05 Jy ! Component: 150 - total flux cleaned = -5.06151e-05 Jy ! Component: 200 - total flux cleaned = 5.37989e-05 Jy ! Component: 250 - total flux cleaned = 0.0001212 Jy ! Component: 300 - total flux cleaned = 0.000187208 Jy ! Component: 350 - total flux cleaned = 0.00025165 Jy ! Component: 400 - total flux cleaned = 0.000298778 Jy ! Component: 450 - total flux cleaned = 0.000329179 Jy ! Component: 500 - total flux cleaned = 0.000298826 Jy ! Component: 550 - total flux cleaned = 0.000299007 Jy ! Component: 600 - total flux cleaned = 0.000284616 Jy ! Component: 650 - total flux cleaned = 0.000313235 Jy ! Component: 700 - total flux cleaned = 0.000327245 Jy ! Component: 750 - total flux cleaned = 0.000341041 Jy ! Component: 800 - total flux cleaned = 0.000382341 Jy ! Component: 850 - total flux cleaned = 0.000436419 Jy ! Component: 900 - total flux cleaned = 0.000476553 Jy ! Component: 950 - total flux cleaned = 0.000502757 Jy ! Component: 1000 - total flux cleaned = 0.000554475 Jy ! Component: 1050 - total flux cleaned = 0.000567381 Jy ! Component: 1100 - total flux cleaned = 0.000580187 Jy ! Component: 1150 - total flux cleaned = 0.000642962 Jy ! Component: 1200 - total flux cleaned = 0.000692731 Jy ! Component: 1250 - total flux cleaned = 0.000754127 Jy ! Component: 1300 - total flux cleaned = 0.000753985 Jy ! Component: 1350 - total flux cleaned = 0.000790358 Jy ! Component: 1400 - total flux cleaned = 0.000838253 Jy ! Component: 1450 - total flux cleaned = 0.000850001 Jy ! Component: 1500 - total flux cleaned = 0.000920186 Jy ! Component: 1550 - total flux cleaned = 0.000896956 Jy ! Component: 1600 - total flux cleaned = 0.000954486 Jy ! Component: 1650 - total flux cleaned = 0.000965884 Jy ! Component: 1700 - total flux cleaned = 0.00102224 Jy ! Component: 1750 - total flux cleaned = 0.00102215 Jy ! Component: 1800 - total flux cleaned = 0.0010665 Jy ! Component: 1850 - total flux cleaned = 0.00105541 Jy ! Component: 1900 - total flux cleaned = 0.00107729 Jy ! Component: 1950 - total flux cleaned = 0.00110984 Jy ! Component: 2000 - total flux cleaned = 0.00110989 Jy ! Component: 2050 - total flux cleaned = 0.00118472 Jy ! Component: 2100 - total flux cleaned = 0.00118474 Jy ! Component: 2150 - total flux cleaned = 0.00122691 Jy ! Component: 2200 - total flux cleaned = 0.00126863 Jy ! Component: 2250 - total flux cleaned = 0.0012582 Jy ! Component: 2300 - total flux cleaned = 0.00132003 Jy ! Component: 2350 - total flux cleaned = 0.0013201 Jy ! Component: 2400 - total flux cleaned = 0.00135043 Jy ! Component: 2450 - total flux cleaned = 0.00140091 Jy ! Component: 2500 - total flux cleaned = 0.00144092 Jy ! Component: 2550 - total flux cleaned = 0.00147074 Jy ! Component: 2600 - total flux cleaned = 0.00148065 Jy ! Component: 2650 - total flux cleaned = 0.00152973 Jy ! Component: 2700 - total flux cleaned = 0.00153944 Jy ! Component: 2750 - total flux cleaned = 0.0015975 Jy ! Component: 2800 - total flux cleaned = 0.00161663 Jy ! Component: 2850 - total flux cleaned = 0.00160713 Jy ! Component: 2900 - total flux cleaned = 0.00163558 Jy ! Component: 2950 - total flux cleaned = 0.00166392 Jy ! Component: 3000 - total flux cleaned = 0.001617 Jy ! Component: 3050 - total flux cleaned = 0.00170121 Jy ! Component: 3100 - total flux cleaned = 0.00168259 Jy ! Component: 3150 - total flux cleaned = 0.00166419 Jy ! Component: 3200 - total flux cleaned = 0.00173763 Jy ! Component: 3250 - total flux cleaned = 0.00170105 Jy ! Component: 3300 - total flux cleaned = 0.00171929 Jy ! Component: 3350 - total flux cleaned = 0.00178266 Jy ! Component: 3400 - total flux cleaned = 0.00176471 Jy ! Component: 3450 - total flux cleaned = 0.00180943 Jy ! Component: 3500 - total flux cleaned = 0.00180051 Jy ! Component: 3550 - total flux cleaned = 0.00182693 Jy ! Component: 3600 - total flux cleaned = 0.00178284 Jy ! Component: 3650 - total flux cleaned = 0.00180915 Jy ! Component: 3700 - total flux cleaned = 0.00178305 Jy ! Component: 3750 - total flux cleaned = 0.00180041 Jy ! Component: 3800 - total flux cleaned = 0.00181776 Jy ! Component: 3850 - total flux cleaned = 0.00182633 Jy ! Component: 3900 - total flux cleaned = 0.00184341 Jy ! Component: 3950 - total flux cleaned = 0.00185193 Jy ! Component: 4000 - total flux cleaned = 0.00185191 Jy ! Component: 4050 - total flux cleaned = 0.00191087 Jy ! Total flux subtracted in 4096 components = 0.00190245 Jy ! Clean residual min=-0.000447 max=0.000498 Jy/beam ! Clean residual mean=0.000001 rms=0.000145 Jy/beam ! Combined flux in latest and established models = 0.126595 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 355 components and 0.126595 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1501-3828_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8198 x 2.494 at -10.61 degrees (North through East) ! Clean map min=-0.00082441 max=0.098049 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1501-3828_X_map.fits wmodel /vlbi/bp222/temp_maps//J1501-3828_X_map.mod ! Writing 355 model components to file: /vlbi/bp222/temp_maps//J1501-3828_X_map.mod wobs /vlbi/bp222/temp_maps//J1501-3828_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1501-3828_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1501-3828_X_map.win ! wwins: Wrote 4 windows to /vlbi/bp222/temp_maps//J1501-3828_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0980486 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000145254 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.444436 0.444436 0.888872 1.77774 3.55549 7.11098 14.222 28.4439 56.8878 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.098 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 675.012 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1501-3828_X_dfm.log closed on Thu Feb 14 22:58:20 2019