! Started logfile: /vlbi/bp222/temp_maps//J1439+4958_X_dfm.log on Thu Feb 14 22:57:06 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1439+4958_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1439+4958_X_uvm.fits ! AN table 1: 45 integrations on 28 of 28 possible baselines. ! AN table 2: 23 integrations on 36 of 36 possible baselines. ! AN table 3: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.922316 visibilities/baseline/integration-bin. ! Found source: J1439+4958 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 108 lines of history. ! ! Reading 47016 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1439+4958_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.029409Jy sigma=15.954341 ! Fit after self-cal, rms=0.765466Jy sigma=11.916077 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6676 mas, bmaj=1.251 mas, bpa=-1.451 degrees ! Estimated noise=0.493624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.183502 Jy ! Component: 100 - total flux cleaned = 0.224661 Jy ! Total flux subtracted in 100 components = 0.224661 Jy ! Clean residual min=-0.004677 max=0.014202 Jy/beam ! Clean residual mean=0.000006 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.224661 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.224661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060019Jy sigma=0.870566 ! Fit after self-cal, rms=0.060019Jy sigma=0.870388 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142168 Jy ! Component: 100 - total flux cleaned = 0.0162045 Jy ! Total flux subtracted in 100 components = 0.0162045 Jy ! Clean residual min=-0.003781 max=0.004478 Jy/beam ! Clean residual mean=0.000001 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.240865 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.240865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057253Jy sigma=0.827598 ! Fit after self-cal, rms=0.057225Jy sigma=0.827100 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8656 mas, bmaj=1.538 mas, bpa=-0.3965 degrees ! Estimated noise=0.220513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036503 Jy ! Component: 100 - total flux cleaned = 0.0038908 Jy ! Component: 150 - total flux cleaned = 0.003708 Jy ! Component: 200 - total flux cleaned = 0.00354837 Jy ! Total flux subtracted in 200 components = 0.00354837 Jy ! Clean residual min=-0.004380 max=0.003625 Jy/beam ! Clean residual mean=0.000000 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.244414 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.244414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056825Jy sigma=0.820220 ! Fit after self-cal, rms=0.056804Jy sigma=0.819904 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8656 x 1.538 at -0.3965 degrees (North through East) ! Clean map min=-0.004204 max=0.23515 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.01 KP 0.97 ! MK 1.03 NL 0.97 OV 0.99 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 KP 1.02 LA 0.89 ! MK 1.02 NL 0.89 OV 1.00 PT 1.02 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 1.05 HN 1.03 KP 1.07 ! LA 1.03 MK 1.05 NL 1.04 OV 1.04 ! PT 1.07 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.99 KP 0.97 ! MK 1.02 NL 0.98 OV 0.98 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 KP 1.02 LA 0.89 ! MK 1.02 NL 0.89 OV 1.01 PT 0.98 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 1.05 HN 1.03 KP 1.06 ! LA 1.02 MK 1.06 NL 1.04 OV 1.05 ! PT 1.07 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 0.98 KP 0.98 ! MK 1.04 NL 1.00 OV 0.97 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.00 KP 0.99 LA 0.87 ! MK 1.01 NL 0.89 OV 1.01 PT 1.00 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 1.01 HN 1.01 KP 1.06 ! LA 1.01 MK 1.06 NL 1.06 OV 1.05 ! PT 1.09 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.00 KP 0.98 ! MK 1.02 NL 0.97 OV 0.99 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 KP 1.01 LA 0.87 ! MK 1.01 NL 0.92 OV 1.00 PT 1.02 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.03 HN 1.01 KP 1.04 ! LA 1.02 MK 1.04 NL 1.06 OV 1.04 ! PT 1.08 SC 0.93 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.00 KP 0.98 ! MK 1.02 NL 0.96 OV 0.98 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.99 KP 1.02 LA 0.88 ! MK 0.97 NL 0.91 OV 1.00 PT 1.00 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.03 HN 0.99 KP 1.04 ! LA 1.03 MK 1.04 NL 1.04 OV 1.06 ! PT 1.09 SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.01 KP 0.98 ! MK 1.02 NL 0.97 OV 0.98 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.01 KP 1.02 LA 0.86 ! MK 0.97 NL 0.91 OV 0.98 PT 1.01 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.04 HN 1.01 KP 1.05 ! LA 1.01 MK 1.03 NL 1.05 OV 1.05 ! PT 1.08 SC 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 1.00 KP 0.97 ! MK 1.02 NL 0.98 OV 0.97 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00 KP 1.02 LA 0.87 ! MK 1.00 NL 0.91 OV 0.98 PT 1.01 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 1.04 HN 1.02 KP 1.03 ! LA 1.03 MK 1.04 NL 1.05 OV 1.05 ! PT 1.06 SC 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.99 KP 0.97 ! MK 1.01 NL 0.95 OV 0.95 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00 KP 0.99 LA 0.89 ! MK 0.98 NL 0.90 OV 0.99 PT 1.00 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.02 HN 1.01 KP 1.05 ! LA 1.00 MK 1.04 NL 1.04 OV 1.04 ! PT 1.06 SC 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 0.98 KP 0.95 ! MK 1.02 NL 0.98 OV 0.96 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.00 KP 1.04 LA 0.89 ! MK 0.99 NL 0.91 OV 1.01 PT 1.00 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.03 HN 1.02 KP 1.04 ! LA 1.03 MK 1.04 NL 1.04 OV 1.04 ! PT 1.06 SC 0.94 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 0.99 KP 0.95 ! MK 1.00 NL 0.97 OV 0.97 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.98 KP 0.99 LA 0.87 ! MK 0.98 NL 0.90 OV 0.98 PT 1.00 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.00 HN 1.01 KP 1.06 ! LA 1.01 MK 1.03 NL 1.07 OV 1.04 ! PT 1.04 SC 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 0.98 KP 0.95 ! MK 1.01 NL 0.98 OV 0.96 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 KP 1.00 LA 0.87 ! MK 0.97 NL 0.88 OV 1.00 PT 0.99 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.04 HN 0.99 KP 1.05 ! LA 1.01 MK 1.01 NL 1.05 OV 1.05 ! PT 1.06 SC 0.95 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 1.01 KP 0.96 ! MK 1.01 NL 0.97 OV 0.97 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.98 KP 0.99 LA 0.84 ! MK 0.92 NL 0.89 OV 1.02 PT 1.00 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.02 HN 1.01 KP 1.05 ! LA 1.00 MK 0.99 NL 1.05 OV 1.05 ! PT 1.02 SC 0.93 ! ! ! Fit before self-cal, rms=0.056804Jy sigma=0.819904 ! Fit after self-cal, rms=0.052944Jy sigma=0.769411 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8612 mas, bmaj=1.532 mas, bpa=-1.047 degrees ! Estimated noise=0.219528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00091789 Jy ! Component: 100 - total flux cleaned = 0.00121256 Jy ! Component: 150 - total flux cleaned = 0.00144472 Jy ! Component: 200 - total flux cleaned = 0.00172836 Jy ! Total flux subtracted in 200 components = 0.00172836 Jy ! Clean residual min=-0.000845 max=0.000965 Jy/beam ! Clean residual mean=0.000001 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.246142 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.246142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052856Jy sigma=0.768187 ! Fit after self-cal, rms=0.052862Jy sigma=0.768066 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052862Jy sigma=0.768066 ! Fit after self-cal, rms=0.052825Jy sigma=0.767728 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.86 mas, bmaj=1.532 mas, bpa=-1.239 degrees ! Estimated noise=0.219574 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000480431 Jy ! Component: 100 - total flux cleaned = 0.000719227 Jy ! Component: 150 - total flux cleaned = 0.000935973 Jy ! Component: 200 - total flux cleaned = 0.00109586 Jy ! Total flux subtracted in 200 components = 0.00109586 Jy ! Clean residual min=-0.000789 max=0.000852 Jy/beam ! Clean residual mean=0.000001 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.247238 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 43 components and 0.247238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052791Jy sigma=0.767301 ! Fit after self-cal, rms=0.052788Jy sigma=0.767270 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.4, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00075615 Jy ! Component: 100 - total flux cleaned = 0.000869461 Jy ! Component: 150 - total flux cleaned = 0.00102146 Jy ! Component: 200 - total flux cleaned = 0.00113944 Jy ! Total flux subtracted in 200 components = 0.00113944 Jy ! Clean residual min=-0.000788 max=0.000801 Jy/beam ! Clean residual mean=0.000001 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.248377 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 57 components and 0.248377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052767Jy sigma=0.766987 ! Fit after self-cal, rms=0.052765Jy sigma=0.766972 ! Inverting map ! Added new window around map position (-4, -23.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273002 Jy ! Component: 100 - total flux cleaned = 0.000327755 Jy ! Component: 150 - total flux cleaned = 0.000408605 Jy ! Component: 200 - total flux cleaned = 0.000438401 Jy ! Total flux subtracted in 200 components = 0.000438401 Jy ! Clean residual min=-0.000751 max=0.000757 Jy/beam ! Clean residual mean=0.000001 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.248816 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 75 components and 0.248816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052751Jy sigma=0.766772 ! Fit after self-cal, rms=0.052750Jy sigma=0.766766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052750Jy sigma=0.766766 ! Fit after self-cal, rms=0.052722Jy sigma=0.765458 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8592 mas, bmaj=1.532 mas, bpa=-1.371 degrees ! Estimated noise=0.219631 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285261 Jy ! Component: 100 - total flux cleaned = 0.000470972 Jy ! Component: 150 - total flux cleaned = 0.000586989 Jy ! Component: 200 - total flux cleaned = 0.00062682 Jy ! Total flux subtracted in 200 components = 0.00062682 Jy ! Clean residual min=-0.000698 max=0.000706 Jy/beam ! Clean residual mean=0.000000 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.249442 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 84 components and 0.249443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052712Jy sigma=0.765326 ! Fit after self-cal, rms=0.052713Jy sigma=0.765315 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.53718e-05 Jy ! Component: 100 - total flux cleaned = 7.1247e-05 Jy ! Component: 150 - total flux cleaned = 8.27069e-05 Jy ! Component: 200 - total flux cleaned = 8.30438e-05 Jy ! Total flux subtracted in 200 components = 8.30438e-05 Jy ! Clean residual min=-0.000716 max=0.000703 Jy/beam ! Clean residual mean=0.000000 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.249526 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 94 components and 0.249526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052708Jy sigma=0.765250 ! Fit after self-cal, rms=0.052707Jy sigma=0.765247 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052707Jy sigma=0.765247 ! Fit after self-cal, rms=0.052730Jy sigma=0.765213 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.97 mas, bmaj=2.495 mas, bpa=5.376 degrees ! Estimated noise=0.28942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.09798e-05 Jy ! Component: 100 - total flux cleaned = 1.40531e-05 Jy ! Component: 150 - total flux cleaned = -6.60985e-05 Jy ! Component: 200 - total flux cleaned = -0.000125208 Jy ! Total flux subtracted in 200 components = -0.000125208 Jy ! Clean residual min=-0.000688 max=0.000738 Jy/beam ! Clean residual mean=0.000001 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.2494 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 113 components and 0.2494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052729Jy sigma=0.765221 ! Fit after self-cal, rms=0.052729Jy sigma=0.765213 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.75628e-05 Jy ! Component: 100 - total flux cleaned = -0.000127827 Jy ! Component: 150 - total flux cleaned = -0.000173756 Jy ! Component: 200 - total flux cleaned = -0.000197092 Jy ! Total flux subtracted in 200 components = -0.000197092 Jy ! Clean residual min=-0.000688 max=0.000718 Jy/beam ! Clean residual mean=0.000001 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.249203 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 118 components and 0.249203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052729Jy sigma=0.765219 ! Fit after self-cal, rms=0.052729Jy sigma=0.765218 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8587 mas, bmaj=1.532 mas, bpa=-1.453 degrees ! Estimated noise=0.219743 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8587 x 1.532 at -1.453 degrees (North through East) ! Clean map min=-0.00066299 max=0.23439 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.663 mas, bmaj=1.249 mas, bpa=-2.384 degrees ! Estimated noise=0.488456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.181528 Jy ! Component: 100 - total flux cleaned = 0.221862 Jy ! Component: 150 - total flux cleaned = 0.235488 Jy ! Component: 200 - total flux cleaned = 0.241476 Jy ! Total flux subtracted in 200 components = 0.241476 Jy ! Clean residual min=-0.001869 max=0.002729 Jy/beam ! Clean residual mean=0.000002 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.241476 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.241476 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8587 mas, bmaj=1.532 mas, bpa=-1.453 degrees ! Estimated noise=0.219743 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00369613 Jy ! Component: 100 - total flux cleaned = 0.00553953 Jy ! Component: 150 - total flux cleaned = 0.00648053 Jy ! Component: 200 - total flux cleaned = 0.00703693 Jy ! Total flux subtracted in 200 components = 0.00703693 Jy ! Clean residual min=-0.000773 max=0.000809 Jy/beam ! Clean residual mean=0.000001 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.248513 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 32 components and 0.248513 Jy ! Inverting map ! Added new window around map position (-36.2, 17.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000540268 Jy ! Component: 100 - total flux cleaned = 0.000831952 Jy ! Component: 150 - total flux cleaned = 0.00100652 Jy ! Component: 200 - total flux cleaned = 0.00111146 Jy ! Total flux subtracted in 200 components = 0.00111146 Jy ! Clean residual min=-0.000675 max=0.000716 Jy/beam ! Clean residual mean=0.000001 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.249625 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 42 components and 0.249625 Jy ! Inverting map ! Added new window around map position (-8.6, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000389866 Jy ! Component: 100 - total flux cleaned = 0.000483788 Jy ! Component: 150 - total flux cleaned = 0.000549105 Jy ! Component: 200 - total flux cleaned = 0.000651134 Jy ! Total flux subtracted in 200 components = 0.000651134 Jy ! Clean residual min=-0.000690 max=0.000667 Jy/beam ! Clean residual mean=0.000000 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.250276 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 56 components and 0.250276 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.97 mas, bmaj=2.495 mas, bpa=5.376 degrees ! Estimated noise=0.28942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.3389e-05 Jy ! Component: 100 - total flux cleaned = -3.57323e-06 Jy ! Component: 150 - total flux cleaned = -9.34908e-05 Jy ! Component: 200 - total flux cleaned = -0.000159789 Jy ! Total flux subtracted in 200 components = -0.000159789 Jy ! Clean residual min=-0.000769 max=0.000639 Jy/beam ! Clean residual mean=0.000001 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.250116 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.38388e-05 Jy ! Component: 100 - total flux cleaned = -4.58351e-05 Jy ! Component: 150 - total flux cleaned = -6.61207e-05 Jy ! Component: 200 - total flux cleaned = -9.4534e-05 Jy ! Total flux subtracted in 200 components = -9.4534e-05 Jy ! Clean residual min=-0.000752 max=0.000614 Jy/beam ! Clean residual mean=0.000001 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.250021 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 88 components and 0.250021 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8587 mas, bmaj=1.532 mas, bpa=-1.453 degrees ! Estimated noise=0.219743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150388 Jy ! Component: 100 - total flux cleaned = 0.000150513 Jy ! Component: 150 - total flux cleaned = 0.000150118 Jy ! Component: 200 - total flux cleaned = 0.000164234 Jy ! Total flux subtracted in 200 components = 0.000164234 Jy ! Clean residual min=-0.000704 max=0.000625 Jy/beam ! Clean residual mean=0.000000 rms=0.000153 Jy/beam ! Combined flux in latest and established models = 0.250186 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 106 components and 0.250185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052723Jy sigma=0.765072 ! Fit after self-cal, rms=0.052721Jy sigma=0.765042 wmodel J1439+4958_X_map.mod ! Writing 106 model components to file: J1439+4958_X_map.mod wobs J1439+4958_X_uvs.fits ! Writing UV FITS file: J1439+4958_X_uvs.fits wwins J1439+4958_X_map.win ! wwins: Wrote 6 windows to J1439+4958_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.73124e-05 Jy ! Component: 100 - total flux cleaned = -4.27925e-05 Jy ! Component: 150 - total flux cleaned = -2.07622e-05 Jy ! Component: 200 - total flux cleaned = 1.19222e-05 Jy ! Component: 250 - total flux cleaned = 8.60142e-05 Jy ! Component: 300 - total flux cleaned = 0.0001274 Jy ! Component: 350 - total flux cleaned = 0.000147755 Jy ! Component: 400 - total flux cleaned = 0.000187586 Jy ! Component: 450 - total flux cleaned = 0.000187654 Jy ! Component: 500 - total flux cleaned = 0.000207101 Jy ! Component: 550 - total flux cleaned = 0.000235757 Jy ! Component: 600 - total flux cleaned = 0.000245291 Jy ! Component: 650 - total flux cleaned = 0.000273132 Jy ! Component: 700 - total flux cleaned = 0.000300713 Jy ! Component: 750 - total flux cleaned = 0.00030066 Jy ! Component: 800 - total flux cleaned = 0.000327781 Jy ! Component: 850 - total flux cleaned = 0.000327861 Jy ! Component: 900 - total flux cleaned = 0.000345526 Jy ! Component: 950 - total flux cleaned = 0.00036308 Jy ! Component: 1000 - total flux cleaned = 0.000371909 Jy ! Component: 1050 - total flux cleaned = 0.000371922 Jy ! Component: 1100 - total flux cleaned = 0.000389077 Jy ! Component: 1150 - total flux cleaned = 0.000380715 Jy ! Component: 1200 - total flux cleaned = 0.000431045 Jy ! Component: 1250 - total flux cleaned = 0.000464327 Jy ! Component: 1300 - total flux cleaned = 0.000439439 Jy ! Component: 1350 - total flux cleaned = 0.00047224 Jy ! Component: 1400 - total flux cleaned = 0.000464014 Jy ! Component: 1450 - total flux cleaned = 0.000488309 Jy ! Component: 1500 - total flux cleaned = 0.000472193 Jy ! Component: 1550 - total flux cleaned = 0.000472229 Jy ! Component: 1600 - total flux cleaned = 0.000456458 Jy ! Component: 1650 - total flux cleaned = 0.000480177 Jy ! Component: 1700 - total flux cleaned = 0.000433295 Jy ! Component: 1750 - total flux cleaned = 0.000495569 Jy ! Component: 1800 - total flux cleaned = 0.000456974 Jy ! Component: 1850 - total flux cleaned = 0.000472353 Jy ! Component: 1900 - total flux cleaned = 0.000441749 Jy ! Component: 1950 - total flux cleaned = 0.000449311 Jy ! Component: 2000 - total flux cleaned = 0.00047194 Jy ! Component: 2050 - total flux cleaned = 0.000441982 Jy ! Component: 2100 - total flux cleaned = 0.00043456 Jy ! Component: 2150 - total flux cleaned = 0.000486438 Jy ! Component: 2200 - total flux cleaned = 0.000486416 Jy ! Component: 2250 - total flux cleaned = 0.000493728 Jy ! Component: 2300 - total flux cleaned = 0.000508331 Jy ! Component: 2350 - total flux cleaned = 0.000537365 Jy ! Component: 2400 - total flux cleaned = 0.000537341 Jy ! Component: 2450 - total flux cleaned = 0.000544549 Jy ! Component: 2500 - total flux cleaned = 0.000523029 Jy ! Component: 2550 - total flux cleaned = 0.000494639 Jy ! Component: 2600 - total flux cleaned = 0.000487612 Jy ! Component: 2650 - total flux cleaned = 0.000487645 Jy ! Component: 2700 - total flux cleaned = 0.000480659 Jy ! Component: 2750 - total flux cleaned = 0.000459693 Jy ! Component: 2800 - total flux cleaned = 0.000452766 Jy ! Component: 2850 - total flux cleaned = 0.000445899 Jy ! Component: 2900 - total flux cleaned = 0.000439011 Jy ! Component: 2950 - total flux cleaned = 0.000438987 Jy ! Component: 3000 - total flux cleaned = 0.000432142 Jy ! Component: 3050 - total flux cleaned = 0.000418572 Jy ! Component: 3100 - total flux cleaned = 0.000398369 Jy ! Component: 3150 - total flux cleaned = 0.000398421 Jy ! Component: 3200 - total flux cleaned = 0.000385055 Jy ! Component: 3250 - total flux cleaned = 0.000371645 Jy ! Component: 3300 - total flux cleaned = 0.000338435 Jy ! Component: 3350 - total flux cleaned = 0.000345001 Jy ! Component: 3400 - total flux cleaned = 0.000292295 Jy ! Component: 3450 - total flux cleaned = 0.000311973 Jy ! Component: 3500 - total flux cleaned = 0.000279325 Jy ! Component: 3550 - total flux cleaned = 0.000285811 Jy ! Component: 3600 - total flux cleaned = 0.000305224 Jy ! Component: 3650 - total flux cleaned = 0.00027297 Jy ! Component: 3700 - total flux cleaned = 0.000272952 Jy ! Component: 3750 - total flux cleaned = 0.000285801 Jy ! Component: 3800 - total flux cleaned = 0.000279443 Jy ! Component: 3850 - total flux cleaned = 0.000273089 Jy ! Component: 3900 - total flux cleaned = 0.000285791 Jy ! Component: 3950 - total flux cleaned = 0.000247931 Jy ! Component: 4000 - total flux cleaned = 0.000241637 Jy ! Component: 4050 - total flux cleaned = 0.000247889 Jy ! Total flux subtracted in 4096 components = 0.000260354 Jy ! Clean residual min=-0.000373 max=0.000342 Jy/beam ! Clean residual mean=0.000000 rms=0.000107 Jy/beam ! Combined flux in latest and established models = 0.250446 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 434 components and 0.250446 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1439+4958_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8587 x 1.532 at -1.453 degrees (North through East) ! Clean map min=-0.00053132 max=0.23423 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1439+4958_X_map.fits wmodel /vlbi/bp222/temp_maps//J1439+4958_X_map.mod ! Writing 434 model components to file: /vlbi/bp222/temp_maps//J1439+4958_X_map.mod wobs /vlbi/bp222/temp_maps//J1439+4958_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1439+4958_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1439+4958_X_map.win ! wwins: Wrote 7 windows to /vlbi/bp222/temp_maps//J1439+4958_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.234225 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000106572 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.136499 0.136499 0.272998 0.545995 1.09199 2.18398 4.36796 8.73593 17.4719 34.9437 69.8874 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.234 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2197.82 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1439+4958_X_dfm.log closed on Thu Feb 14 22:57:13 2019