! Started logfile: /vlbi/bp222/maps//J1419+5423_X_dfm.log on Mon Jan 14 16:54:52 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/maps//J1419+5423_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/maps//J1419+5423_X_uvm.fits ! AN table 1: 16 integrations on 21 of 21 possible baselines. ! AN table 2: 15 integrations on 28 of 28 possible baselines. ! AN table 3: 14 integrations on 36 of 36 possible baselines. ! Apparent sampling: 1.26905 visibilities/baseline/integration-bin. ! Found source: J1419+5423 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 108 lines of history. ! ! Reading 19188 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1419+5423_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.312804Jy sigma=20.540071 ! Fit after self-cal, rms=0.444359Jy sigma=7.432228 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6009 mas, bmaj=2.238 mas, bpa=-34.18 degrees ! Estimated noise=0.789931 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.57158 Jy ! Component: 100 - total flux cleaned = 0.806591 Jy ! Total flux subtracted in 100 components = 0.806591 Jy ! Clean residual min=-0.065653 max=0.106426 Jy/beam ! Clean residual mean=-0.000089 rms=0.012734 Jy/beam ! Combined flux in latest and established models = 0.806592 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.806592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.277273Jy sigma=4.216017 ! Fit after self-cal, rms=0.261121Jy sigma=4.037720 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138598 Jy ! Component: 100 - total flux cleaned = 0.217185 Jy ! Total flux subtracted in 100 components = 0.217185 Jy ! Clean residual min=-0.033228 max=0.041003 Jy/beam ! Clean residual mean=-0.000036 rms=0.006046 Jy/beam ! Combined flux in latest and established models = 1.02378 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 13 components and 1.02378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.144593Jy sigma=2.178644 ! Fit after self-cal, rms=0.138980Jy sigma=2.115177 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0560763 Jy ! Component: 100 - total flux cleaned = 0.0869317 Jy ! Total flux subtracted in 100 components = 0.0869317 Jy ! Clean residual min=-0.022129 max=0.024800 Jy/beam ! Clean residual mean=-0.000015 rms=0.003865 Jy/beam ! Combined flux in latest and established models = 1.11071 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 1.11071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104215Jy sigma=1.548691 ! Fit after self-cal, rms=0.103159Jy sigma=1.533610 ! Inverting map ! Added new window around map position (1.8, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220351 Jy ! Component: 100 - total flux cleaned = 0.0338557 Jy ! Total flux subtracted in 100 components = 0.0338557 Jy ! Clean residual min=-0.016744 max=0.014549 Jy/beam ! Clean residual mean=-0.000007 rms=0.003009 Jy/beam ! Combined flux in latest and established models = 1.14456 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 1.14456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089890Jy sigma=1.312963 ! Fit after self-cal, rms=0.089688Jy sigma=1.309596 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7868 mas, bmaj=2.325 mas, bpa=-34.46 degrees ! Estimated noise=0.395557 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208154 Jy ! Component: 100 - total flux cleaned = 0.0265447 Jy ! Component: 150 - total flux cleaned = 0.0295526 Jy ! Component: 200 - total flux cleaned = 0.0314195 Jy ! Total flux subtracted in 200 components = 0.0314195 Jy ! Clean residual min=-0.012683 max=0.011846 Jy/beam ! Clean residual mean=0.000006 rms=0.003012 Jy/beam ! Combined flux in latest and established models = 1.17598 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 44 components and 1.17598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079765Jy sigma=1.138607 ! Fit after self-cal, rms=0.079560Jy sigma=1.135257 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7868 x 2.325 at -34.46 degrees (North through East) ! Clean map min=-0.023691 max=0.73619 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.99 KP 1.00 ! MK 0.99 NL 0.90 OV 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.02 HN 0.96 KP 0.98 ! MK 0.98 NL 0.99 OV 0.94 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 KP 1.00 LA 1.00 ! MK 1.01 NL 0.97 OV 1.01 PT 1.02 ! SC 1.10 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.99 KP 1.01 ! MK 1.02 NL 0.90 OV 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.02 HN 0.98 KP 0.99 ! MK 1.00 NL 1.00 OV 0.96 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00 KP 1.02 LA 0.99 ! MK 1.02 NL 0.96 OV 1.00 PT 1.03 ! SC 1.09 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.99 KP 0.99 ! MK 0.99 NL 0.90 OV 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.01 HN 1.00 KP 1.01 ! MK 1.00 NL 1.01 OV 0.96 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.02 KP 1.00 LA 0.98 ! MK 1.02 NL 0.97 OV 1.01 PT 1.03 ! SC 1.07 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.98 KP 1.00 ! MK 1.01 NL 0.90 OV 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 HN 0.98 KP 1.00 ! MK 1.00 NL 1.01 OV 0.94 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 KP 1.02 LA 0.98 ! MK 1.01 NL 0.99 OV 1.01 PT 1.03 ! SC 1.08 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.99 KP 1.00 ! MK 1.00 NL 0.91 OV 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.00 HN 0.96 KP 0.99 ! MK 1.01 NL 1.01 OV 0.95 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.01 KP 1.02 LA 0.99 ! MK 1.00 NL 0.96 OV 1.00 PT 1.03 ! SC 1.10 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.00 KP 1.00 ! MK 1.02 NL 0.88 OV 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 HN 0.98 KP 0.99 ! MK 1.00 NL 1.05 OV 0.96 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.02 KP 1.02 LA 0.97 ! MK 0.99 NL 0.96 OV 0.99 PT 1.03 ! SC 1.08 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.98 KP 1.00 ! MK 1.00 NL 0.90 OV 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.01 HN 0.98 KP 0.99 ! MK 1.00 NL 1.01 OV 0.97 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.01 KP 1.03 LA 0.98 ! MK 1.00 NL 0.97 OV 1.00 PT 1.02 ! SC 1.10 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.98 KP 1.00 ! MK 1.02 NL 0.89 OV 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.03 HN 0.99 KP 0.97 ! MK 0.98 NL 1.02 OV 0.97 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.02 KP 1.01 LA 0.98 ! MK 1.00 NL 0.97 OV 1.00 PT 1.02 ! SC 1.10 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 0.98 KP 1.01 ! MK 0.98 NL 0.90 OV 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.01 HN 0.99 KP 0.97 ! MK 0.98 NL 1.01 OV 0.95 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.01 KP 1.02 LA 0.98 ! MK 1.01 NL 0.96 OV 1.00 PT 1.04 ! SC 1.08 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 0.98 KP 1.00 ! MK 1.00 NL 0.90 OV 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 HN 0.99 KP 0.99 ! MK 1.01 NL 1.01 OV 0.95 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.02 KP 1.00 LA 0.97 ! MK 1.00 NL 0.96 OV 1.00 PT 1.04 ! SC 1.09 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.98 KP 0.99 ! MK 1.00 NL 0.89 OV 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.03 HN 0.96 KP 0.97 ! MK 0.98 NL 1.00 OV 0.94 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.01 KP 1.01 LA 0.97 ! MK 1.00 NL 0.96 OV 1.00 PT 1.04 ! SC 1.10 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.99 KP 1.00 ! MK 0.98 NL 0.90 OV 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 HN 0.94 KP 0.97 ! MK 0.95 NL 1.00 OV 0.93 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.99 KP 1.02 LA 0.96 ! MK 0.98 NL 0.96 OV 1.00 PT 1.03 ! SC 1.10 ! ! ! Fit before self-cal, rms=0.079560Jy sigma=1.135257 ! Fit after self-cal, rms=0.063251Jy sigma=0.909245 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7877 mas, bmaj=2.328 mas, bpa=-34.42 degrees ! Estimated noise=0.393024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00887661 Jy ! Component: 100 - total flux cleaned = 0.0123846 Jy ! Component: 150 - total flux cleaned = 0.0133428 Jy ! Component: 200 - total flux cleaned = 0.0138746 Jy ! Total flux subtracted in 200 components = 0.0138746 Jy ! Clean residual min=-0.005637 max=0.006246 Jy/beam ! Clean residual mean=0.000000 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 1.18986 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 66 components and 1.18986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061769Jy sigma=0.884235 ! Fit after self-cal, rms=0.061597Jy sigma=0.882323 ! Inverting map ! Added new window around map position (-2, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340912 Jy ! Component: 100 - total flux cleaned = 0.00452614 Jy ! Component: 150 - total flux cleaned = 0.00550351 Jy ! Component: 200 - total flux cleaned = 0.00661925 Jy ! Total flux subtracted in 200 components = 0.00661925 Jy ! Clean residual min=-0.004861 max=0.004810 Jy/beam ! Clean residual mean=0.000005 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 1.19648 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 1.19648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060778Jy sigma=0.869157 ! Fit after self-cal, rms=0.060736Jy sigma=0.868782 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060736Jy sigma=0.868782 ! Fit after self-cal, rms=0.060463Jy sigma=0.866783 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7878 mas, bmaj=2.326 mas, bpa=-34.43 degrees ! Estimated noise=0.392726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385733 Jy ! Component: 100 - total flux cleaned = 0.00603996 Jy ! Component: 150 - total flux cleaned = 0.00714961 Jy ! Component: 200 - total flux cleaned = 0.00779698 Jy ! Total flux subtracted in 200 components = 0.00779698 Jy ! Clean residual min=-0.004197 max=0.004113 Jy/beam ! Clean residual mean=0.000001 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 1.20427 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 99 components and 1.20427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060062Jy sigma=0.860357 ! Fit after self-cal, rms=0.060023Jy sigma=0.860007 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000908856 Jy ! Component: 100 - total flux cleaned = 0.00142077 Jy ! Component: 150 - total flux cleaned = 0.00205077 Jy ! Component: 200 - total flux cleaned = 0.0024184 Jy ! Total flux subtracted in 200 components = 0.0024184 Jy ! Clean residual min=-0.003741 max=0.003832 Jy/beam ! Clean residual mean=0.000003 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 1.20669 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 107 components and 1.20669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059810Jy sigma=0.856720 ! Fit after self-cal, rms=0.059786Jy sigma=0.856530 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059786Jy sigma=0.856530 ! Fit after self-cal, rms=0.059666Jy sigma=0.856028 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7879 mas, bmaj=2.325 mas, bpa=-34.44 degrees ! Estimated noise=0.392675 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213245 Jy ! Component: 100 - total flux cleaned = 0.00267587 Jy ! Component: 150 - total flux cleaned = 0.00322283 Jy ! Component: 200 - total flux cleaned = 0.00378486 Jy ! Total flux subtracted in 200 components = 0.00378486 Jy ! Clean residual min=-0.003335 max=0.003508 Jy/beam ! Clean residual mean=0.000001 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 1.21048 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 112 components and 1.21048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059495Jy sigma=0.853326 ! Fit after self-cal, rms=0.059477Jy sigma=0.853162 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.8, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330957 Jy ! Component: 100 - total flux cleaned = 0.00554553 Jy ! Component: 150 - total flux cleaned = 0.00684236 Jy ! Component: 200 - total flux cleaned = 0.00795149 Jy ! Total flux subtracted in 200 components = 0.00795149 Jy ! Clean residual min=-0.002956 max=0.003147 Jy/beam ! Clean residual mean=0.000001 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 1.21843 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 132 components and 1.21843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059206Jy sigma=0.848965 ! Fit after self-cal, rms=0.059194Jy sigma=0.848884 ! Inverting map ! Added new window around map position (12.4, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000728262 Jy ! Component: 100 - total flux cleaned = 0.000489427 Jy ! Component: 150 - total flux cleaned = 0.000691682 Jy ! Component: 200 - total flux cleaned = 0.00112754 Jy ! Total flux subtracted in 200 components = 0.00112754 Jy ! Clean residual min=-0.002568 max=0.002309 Jy/beam ! Clean residual mean=0.000001 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 1.21956 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 154 components and 1.21956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058971Jy sigma=0.845710 ! Fit after self-cal, rms=0.058953Jy sigma=0.845588 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058953Jy sigma=0.845588 ! Fit after self-cal, rms=0.058917Jy sigma=0.845327 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.993 mas, bmaj=2.568 mas, bpa=-43.26 degrees ! Estimated noise=0.517336 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012654 Jy ! Component: 100 - total flux cleaned = 0.00169665 Jy ! Component: 150 - total flux cleaned = 0.00243327 Jy ! Component: 200 - total flux cleaned = 0.00295385 Jy ! Total flux subtracted in 200 components = 0.00295385 Jy ! Clean residual min=-0.002663 max=0.002728 Jy/beam ! Clean residual mean=-0.000003 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 1.22251 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 178 components and 1.22251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058823Jy sigma=0.844370 ! Fit after self-cal, rms=0.058805Jy sigma=0.844241 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224439 Jy ! Component: 100 - total flux cleaned = 0.00072872 Jy ! Component: 150 - total flux cleaned = 0.00114319 Jy ! Component: 200 - total flux cleaned = 0.00171543 Jy ! Total flux subtracted in 200 components = 0.00171543 Jy ! Clean residual min=-0.002395 max=0.002471 Jy/beam ! Clean residual mean=-0.000002 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 1.22423 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 202 components and 1.22423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058762Jy sigma=0.843806 ! Fit after self-cal, rms=0.058749Jy sigma=0.843713 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7878 mas, bmaj=2.325 mas, bpa=-34.45 degrees ! Estimated noise=0.3926 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7878 x 2.325 at -34.45 degrees (North through East) ! Clean map min=-0.014198 max=0.7305 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058749Jy sigma=0.843713 ! Fit after self-cal, rms=0.055171Jy sigma=0.766457 ! Inverting map and beam ! Estimated beam: bmin=0.7878 mas, bmaj=2.325 mas, bpa=-34.45 degrees ! Estimated noise=0.392519 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00091812 Jy ! Component: 100 - total flux cleaned = 0.00129238 Jy ! Component: 150 - total flux cleaned = 0.00168076 Jy ! Component: 200 - total flux cleaned = 0.00190443 Jy ! Total flux subtracted in 200 components = 0.00190443 Jy ! Clean residual min=-0.001944 max=0.001898 Jy/beam ! Clean residual mean=-0.000001 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 1.22613 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 221 components and 1.22613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055084Jy sigma=0.764975 ! Fit after self-cal, rms=0.055081Jy sigma=0.764947 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.48847e-05 Jy ! Component: 100 - total flux cleaned = 0.000278101 Jy ! Component: 150 - total flux cleaned = 0.00058666 Jy ! Component: 200 - total flux cleaned = 0.000732397 Jy ! Total flux subtracted in 200 components = 0.000732397 Jy ! Clean residual min=-0.001845 max=0.001781 Jy/beam ! Clean residual mean=-0.000001 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 1.22686 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 233 components and 1.22686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055028Jy sigma=0.764140 ! Fit after self-cal, rms=0.055025Jy sigma=0.764123 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055025Jy sigma=0.764123 ! Fit after self-cal, rms=0.055027Jy sigma=0.764064 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5997 mas, bmaj=2.242 mas, bpa=-34.1 degrees ! Estimated noise=0.785395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.576802 Jy ! Component: 100 - total flux cleaned = 0.826879 Jy ! Component: 150 - total flux cleaned = 0.955574 Jy ! Component: 200 - total flux cleaned = 1.03269 Jy ! Total flux subtracted in 200 components = 1.03269 Jy ! Clean residual min=-0.017810 max=0.040079 Jy/beam ! Clean residual mean=-0.000043 rms=0.004306 Jy/beam ! Combined flux in latest and established models = 1.03269 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 1.03269 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7878 mas, bmaj=2.325 mas, bpa=-34.45 degrees ! Estimated noise=0.392587 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0661918 Jy ! Component: 100 - total flux cleaned = 0.103977 Jy ! Component: 150 - total flux cleaned = 0.129213 Jy ! Component: 200 - total flux cleaned = 0.146676 Jy ! Total flux subtracted in 200 components = 0.146676 Jy ! Clean residual min=-0.010478 max=0.010206 Jy/beam ! Clean residual mean=-0.000029 rms=0.001957 Jy/beam ! Combined flux in latest and established models = 1.17937 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 34 components and 1.17937 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.993 mas, bmaj=2.568 mas, bpa=-43.25 degrees ! Estimated noise=0.517446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195965 Jy ! Component: 100 - total flux cleaned = 0.0215285 Jy ! Component: 150 - total flux cleaned = 0.0238096 Jy ! Component: 200 - total flux cleaned = 0.0260093 Jy ! Total flux subtracted in 200 components = 0.0260093 Jy ! Clean residual min=-0.006737 max=0.006488 Jy/beam ! Clean residual mean=-0.000025 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 1.20538 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160109 Jy ! Component: 100 - total flux cleaned = 0.00320865 Jy ! Component: 150 - total flux cleaned = 0.00422016 Jy ! Component: 200 - total flux cleaned = 0.00603223 Jy ! Total flux subtracted in 200 components = 0.00603223 Jy ! Clean residual min=-0.004375 max=0.004695 Jy/beam ! Clean residual mean=-0.000019 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 1.21141 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 93 components and 1.21141 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7878 mas, bmaj=2.325 mas, bpa=-34.45 degrees ! Estimated noise=0.392587 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357023 Jy ! Component: 100 - total flux cleaned = 0.00409009 Jy ! Component: 150 - total flux cleaned = 0.00531912 Jy ! Component: 200 - total flux cleaned = 0.00638008 Jy ! Total flux subtracted in 200 components = 0.00638008 Jy ! Clean residual min=-0.003762 max=0.003366 Jy/beam ! Clean residual mean=-0.000002 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 1.21779 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 115 components and 1.21779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056637Jy sigma=0.786129 ! Fit after self-cal, rms=0.056186Jy sigma=0.780177 wmodel J1419+5423_X_map.mod ! Writing 115 model components to file: J1419+5423_X_map.mod wobs J1419+5423_X_uvs.fits ! Writing UV FITS file: J1419+5423_X_uvs.fits wwins J1419+5423_X_map.win ! wwins: Wrote 5 windows to J1419+5423_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122932 Jy ! Component: 100 - total flux cleaned = -0.00190313 Jy ! Component: 150 - total flux cleaned = -0.00221834 Jy ! Component: 200 - total flux cleaned = -0.00221836 Jy ! Component: 250 - total flux cleaned = -0.00217088 Jy ! Component: 300 - total flux cleaned = -0.00212413 Jy ! Component: 350 - total flux cleaned = -0.00207826 Jy ! Component: 400 - total flux cleaned = -0.00216328 Jy ! Component: 450 - total flux cleaned = -0.0023298 Jy ! Component: 500 - total flux cleaned = -0.00241033 Jy ! Component: 550 - total flux cleaned = -0.0025682 Jy ! Component: 600 - total flux cleaned = -0.00279798 Jy ! Component: 650 - total flux cleaned = -0.00294736 Jy ! Component: 700 - total flux cleaned = -0.00316654 Jy ! Component: 750 - total flux cleaned = -0.00334434 Jy ! Component: 800 - total flux cleaned = -0.00351694 Jy ! Component: 850 - total flux cleaned = -0.00358393 Jy ! Component: 900 - total flux cleaned = -0.00361668 Jy ! Component: 950 - total flux cleaned = -0.00361648 Jy ! Component: 1000 - total flux cleaned = -0.00364807 Jy ! Component: 1050 - total flux cleaned = -0.00361779 Jy ! Component: 1100 - total flux cleaned = -0.00374097 Jy ! Component: 1150 - total flux cleaned = -0.00380096 Jy ! Component: 1200 - total flux cleaned = -0.00385985 Jy ! Component: 1250 - total flux cleaned = -0.0038304 Jy ! Component: 1300 - total flux cleaned = -0.00388736 Jy ! Component: 1350 - total flux cleaned = -0.00391454 Jy ! Component: 1400 - total flux cleaned = -0.00383182 Jy ! Component: 1450 - total flux cleaned = -0.0038858 Jy ! Component: 1500 - total flux cleaned = -0.00380557 Jy ! Component: 1550 - total flux cleaned = -0.00383227 Jy ! Component: 1600 - total flux cleaned = -0.00385839 Jy ! Component: 1650 - total flux cleaned = -0.00385801 Jy ! Component: 1700 - total flux cleaned = -0.00380867 Jy ! Component: 1750 - total flux cleaned = -0.00383315 Jy ! Component: 1800 - total flux cleaned = -0.00383314 Jy ! Component: 1850 - total flux cleaned = -0.00380886 Jy ! Component: 1900 - total flux cleaned = -0.00387955 Jy ! Component: 1950 - total flux cleaned = -0.00385638 Jy ! Component: 2000 - total flux cleaned = -0.00378816 Jy ! Component: 2050 - total flux cleaned = -0.00385506 Jy ! Component: 2100 - total flux cleaned = -0.00381034 Jy ! Component: 2150 - total flux cleaned = -0.0037669 Jy ! Component: 2200 - total flux cleaned = -0.00381026 Jy ! Component: 2250 - total flux cleaned = -0.00381101 Jy ! Component: 2300 - total flux cleaned = -0.00387416 Jy ! Component: 2350 - total flux cleaned = -0.00389543 Jy ! Component: 2400 - total flux cleaned = -0.00401781 Jy ! Component: 2450 - total flux cleaned = -0.0039572 Jy ! Component: 2500 - total flux cleaned = -0.00393828 Jy ! Component: 2550 - total flux cleaned = -0.00405648 Jy ! Component: 2600 - total flux cleaned = -0.0041345 Jy ! Component: 2650 - total flux cleaned = -0.00413444 Jy ! Component: 2700 - total flux cleaned = -0.00421039 Jy ! Component: 2750 - total flux cleaned = -0.0043418 Jy ! Component: 2800 - total flux cleaned = -0.00428594 Jy ! Component: 2850 - total flux cleaned = -0.00434116 Jy ! Component: 2900 - total flux cleaned = -0.00432326 Jy ! Component: 2950 - total flux cleaned = -0.00437697 Jy ! Component: 3000 - total flux cleaned = -0.00435924 Jy ! Component: 3050 - total flux cleaned = -0.00442957 Jy ! Component: 3100 - total flux cleaned = -0.00451642 Jy ! Component: 3150 - total flux cleaned = -0.00455109 Jy ! Component: 3200 - total flux cleaned = -0.00458517 Jy ! Component: 3250 - total flux cleaned = -0.00466934 Jy ! Component: 3300 - total flux cleaned = -0.00476919 Jy ! Component: 3350 - total flux cleaned = -0.00473639 Jy ! Component: 3400 - total flux cleaned = -0.00483441 Jy ! Component: 3450 - total flux cleaned = -0.00486689 Jy ! Component: 3500 - total flux cleaned = -0.00493095 Jy ! Component: 3550 - total flux cleaned = -0.00491503 Jy ! Component: 3600 - total flux cleaned = -0.00499339 Jy ! Component: 3650 - total flux cleaned = -0.00503997 Jy ! Component: 3700 - total flux cleaned = -0.00505569 Jy ! Component: 3750 - total flux cleaned = -0.0051624 Jy ! Component: 3800 - total flux cleaned = -0.00514712 Jy ! Component: 3850 - total flux cleaned = -0.0052523 Jy ! Component: 3900 - total flux cleaned = -0.00531138 Jy ! Component: 3950 - total flux cleaned = -0.0053849 Jy ! Component: 4000 - total flux cleaned = -0.00541415 Jy ! Component: 4050 - total flux cleaned = -0.00545751 Jy ! Total flux subtracted in 4096 components = -0.00548651 Jy ! Clean residual min=-0.000894 max=0.000754 Jy/beam ! Clean residual mean=-0.000001 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 1.2123 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 425 components and 1.2123 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/maps//J1419+5423_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7878 x 2.325 at -34.45 degrees (North through East) ! Clean map min=-0.010491 max=0.72539 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/maps//J1419+5423_X_map.fits wmodel /vlbi/bp222/maps//J1419+5423_X_map.mod ! Writing 425 model components to file: /vlbi/bp222/maps//J1419+5423_X_map.mod wobs /vlbi/bp222/maps//J1419+5423_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/maps//J1419+5423_X_uvs.fits wwins /vlbi/bp222/maps//J1419+5423_X_map.win ! wwins: Wrote 6 windows to /vlbi/bp222/maps//J1419+5423_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.725391 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000248578 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.102805 0.102805 0.205609 0.411218 0.822437 1.64487 3.28975 6.5795 13.159 26.318 52.636 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.725 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2918.16 quit ! Quitting program ! Log file /vlbi/bp222/maps//J1419+5423_X_dfm.log closed on Mon Jan 14 16:54:57 2019