! Started logfile: /vlbi/bp222/temp_maps//J1419+3821_X_dfm.log on Thu Feb 14 22:55:45 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1419+3821_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1419+3821_X_uvm.fits ! AN table 1: 67 integrations on 45 of 45 possible baselines. ! AN table 2: 16 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.962399 visibilities/baseline/integration-bin. ! Found source: J1419+3821 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 38700 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1419+3821_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.273941Jy sigma=19.019992 ! Fit after self-cal, rms=0.243830Jy sigma=3.651986 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6768 mas, bmaj=1.59 mas, bpa=-5.772 degrees ! Estimated noise=0.484723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.5959 Jy ! Component: 100 - total flux cleaned = 0.725846 Jy ! Total flux subtracted in 100 components = 0.725846 Jy ! Clean residual min=-0.010930 max=0.036279 Jy/beam ! Clean residual mean=-0.000005 rms=0.002471 Jy/beam ! Combined flux in latest and established models = 0.725846 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.725846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085312Jy sigma=1.308848 ! Fit after self-cal, rms=0.085309Jy sigma=1.308825 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0332302 Jy ! Component: 100 - total flux cleaned = 0.0460965 Jy ! Total flux subtracted in 100 components = 0.0460965 Jy ! Clean residual min=-0.011448 max=0.010548 Jy/beam ! Clean residual mean=-0.000008 rms=0.001939 Jy/beam ! Combined flux in latest and established models = 0.771942 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.771942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072626Jy sigma=1.111095 ! Fit after self-cal, rms=0.072626Jy sigma=1.111083 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8571 mas, bmaj=1.875 mas, bpa=-5.195 degrees ! Estimated noise=0.255318 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324917 Jy ! Component: 100 - total flux cleaned = 0.00325695 Jy ! Component: 150 - total flux cleaned = 0.00340297 Jy ! Component: 200 - total flux cleaned = 0.00366029 Jy ! Total flux subtracted in 200 components = 0.00366029 Jy ! Clean residual min=-0.012484 max=0.010245 Jy/beam ! Clean residual mean=0.000001 rms=0.002256 Jy/beam ! Combined flux in latest and established models = 0.775602 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.775602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071871Jy sigma=1.096919 ! Fit after self-cal, rms=0.071866Jy sigma=1.096871 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8571 x 1.875 at -5.195 degrees (North through East) ! Clean map min=-0.011722 max=0.76684 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 0.98 KP 1.00 ! LA 0.96 MK 1.02 NL 1.00 OV 1.00 ! PT 1.00 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 1.09 LA 1.07 MK 1.06 ! NL 1.06 OV 1.13 PT 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 0.99 KP 1.00 ! LA 0.96 MK 1.02 NL 0.99 OV 0.99 ! PT 1.01 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.10 LA 1.06 MK 1.06 ! NL 1.10 OV 1.12 PT 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 0.98 KP 1.00 ! LA 0.96 MK 1.02 NL 0.99 OV 0.99 ! PT 1.01 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 1.11 LA 1.08 MK 1.07 ! NL 1.07 OV 1.13 PT 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 0.97 KP 0.99 ! LA 0.96 MK 1.03 NL 0.99 OV 0.99 ! PT 1.01 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 1.09 LA 1.08 MK 1.09 ! NL 1.08 OV 1.13 PT 1.07 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 0.96 KP 1.00 ! LA 0.96 MK 1.02 NL 0.99 OV 0.99 ! PT 1.01 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 1.09 LA 1.07 MK 1.06 ! NL 1.09 OV 1.12 PT 1.08 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 0.97 KP 1.00 ! LA 0.96 MK 1.02 NL 1.00 OV 0.99 ! PT 1.01 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.12 LA 1.06 MK 1.07 ! NL 1.09 OV 1.11 PT 1.08 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 0.97 KP 0.99 ! LA 0.97 MK 1.02 NL 0.98 OV 0.99 ! PT 1.00 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.07 LA 1.07 MK 1.09 ! NL 1.08 OV 1.12 PT 1.07 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 0.97 KP 0.99 ! LA 0.96 MK 1.03 NL 0.99 OV 0.99 ! PT 1.00 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.10 LA 1.10 MK 1.05 ! NL 1.06 OV 1.13 PT 1.06 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 0.96 KP 0.99 ! LA 0.97 MK 1.02 NL 0.97 OV 1.00 ! PT 1.00 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.10 LA 1.06 MK 1.05 ! NL 1.09 OV 1.12 PT 1.08 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 0.97 KP 0.99 ! LA 0.96 MK 1.01 NL 0.99 OV 0.99 ! PT 1.00 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 1.13 LA 1.07 MK 1.04 ! NL 1.08 OV 1.11 PT 1.06 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 0.97 KP 0.99 ! LA 0.95 MK 1.03 NL 0.98 OV 0.99 ! PT 1.01 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.08 LA 1.10 MK 1.06 ! NL 1.08 OV 1.10 PT 1.07 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 0.97 KP 0.99 ! LA 0.96 MK 1.01 NL 0.99 OV 0.98 ! PT 0.99 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.09 LA 1.08 MK 1.07 ! NL 1.11 OV 1.12 PT 1.06 ! ! ! Fit before self-cal, rms=0.071866Jy sigma=1.096871 ! Fit after self-cal, rms=0.054725Jy sigma=0.789328 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8563 mas, bmaj=1.881 mas, bpa=-4.607 degrees ! Estimated noise=0.254497 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141512 Jy ! Component: 100 - total flux cleaned = -0.00140579 Jy ! Component: 150 - total flux cleaned = -0.00119716 Jy ! Component: 200 - total flux cleaned = -0.000825641 Jy ! Total flux subtracted in 200 components = -0.000825641 Jy ! Clean residual min=-0.003817 max=0.003935 Jy/beam ! Clean residual mean=0.000003 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.774777 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.774777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054080Jy sigma=0.782039 ! Fit after self-cal, rms=0.054079Jy sigma=0.781983 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054079Jy sigma=0.781983 ! Fit after self-cal, rms=0.051510Jy sigma=0.740766 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8554 mas, bmaj=1.881 mas, bpa=-4.724 degrees ! Estimated noise=0.254425 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324609 Jy ! Component: 100 - total flux cleaned = 0.0037011 Jy ! Component: 150 - total flux cleaned = 0.00381583 Jy ! Component: 200 - total flux cleaned = 0.00396794 Jy ! Total flux subtracted in 200 components = 0.00396794 Jy ! Clean residual min=-0.001509 max=0.001717 Jy/beam ! Clean residual mean=-0.000001 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.778745 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.778745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051318Jy sigma=0.736718 ! Fit after self-cal, rms=0.051307Jy sigma=0.736702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104074 Jy ! Component: 100 - total flux cleaned = 0.00109497 Jy ! Component: 150 - total flux cleaned = 0.0010483 Jy ! Component: 200 - total flux cleaned = 0.00112753 Jy ! Total flux subtracted in 200 components = 0.00112753 Jy ! Clean residual min=-0.001428 max=0.001573 Jy/beam ! Clean residual mean=-0.000001 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.779872 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.779872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051214Jy sigma=0.735123 ! Fit after self-cal, rms=0.051210Jy sigma=0.735069 ! Inverting map ! Added new window around map position (-5, -30.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000787518 Jy ! Component: 100 - total flux cleaned = 0.000940444 Jy ! Component: 150 - total flux cleaned = 0.00100703 Jy ! Component: 200 - total flux cleaned = 0.00106828 Jy ! Total flux subtracted in 200 components = 0.00106828 Jy ! Clean residual min=-0.001353 max=0.001391 Jy/beam ! Clean residual mean=-0.000001 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.78094 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 57 components and 0.780941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051155Jy sigma=0.734211 ! Fit after self-cal, rms=0.051154Jy sigma=0.734180 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051154Jy sigma=0.734180 ! Fit after self-cal, rms=0.050806Jy sigma=0.727050 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8545 mas, bmaj=1.88 mas, bpa=-4.751 degrees ! Estimated noise=0.254384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133254 Jy ! Component: 100 - total flux cleaned = 0.00217023 Jy ! Component: 150 - total flux cleaned = 0.00231382 Jy ! Component: 200 - total flux cleaned = 0.00241645 Jy ! Total flux subtracted in 200 components = 0.00241645 Jy ! Clean residual min=-0.000936 max=0.001301 Jy/beam ! Clean residual mean=0.000000 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.783357 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.783357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050762Jy sigma=0.726292 ! Fit after self-cal, rms=0.050762Jy sigma=0.726277 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000704238 Jy ! Component: 100 - total flux cleaned = 0.000776379 Jy ! Component: 150 - total flux cleaned = 0.000745945 Jy ! Component: 200 - total flux cleaned = 0.000691292 Jy ! Total flux subtracted in 200 components = 0.000691292 Jy ! Clean residual min=-0.000882 max=0.000928 Jy/beam ! Clean residual mean=0.000000 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.784048 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 79 components and 0.784048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050714Jy sigma=0.725654 ! Fit after self-cal, rms=0.050712Jy sigma=0.725634 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050712Jy sigma=0.725634 ! Fit after self-cal, rms=0.050706Jy sigma=0.725455 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.097 mas, bmaj=2.772 mas, bpa=-6.362 degrees ! Estimated noise=0.327418 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011367 Jy ! Component: 100 - total flux cleaned = 0.00144469 Jy ! Component: 150 - total flux cleaned = 0.00153302 Jy ! Component: 200 - total flux cleaned = 0.0015497 Jy ! Total flux subtracted in 200 components = 0.0015497 Jy ! Clean residual min=-0.000996 max=0.001117 Jy/beam ! Clean residual mean=0.000000 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.785598 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 102 components and 0.785598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050692Jy sigma=0.725142 ! Fit after self-cal, rms=0.050692Jy sigma=0.725133 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.0006e-05 Jy ! Component: 100 - total flux cleaned = 3.37701e-05 Jy ! Component: 150 - total flux cleaned = 2.08868e-05 Jy ! Component: 200 - total flux cleaned = -2.18103e-06 Jy ! Total flux subtracted in 200 components = -2.18103e-06 Jy ! Clean residual min=-0.000978 max=0.001105 Jy/beam ! Clean residual mean=0.000000 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.785596 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 115 components and 0.785596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050688Jy sigma=0.725069 ! Fit after self-cal, rms=0.050687Jy sigma=0.725067 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8541 mas, bmaj=1.88 mas, bpa=-4.755 degrees ! Estimated noise=0.254443 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8541 x 1.88 at -4.755 degrees (North through East) ! Clean map min=-0.0010309 max=0.76308 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050687Jy sigma=0.725067 ! Fit after self-cal, rms=0.047741Jy sigma=0.669697 ! Inverting map and beam ! Estimated beam: bmin=0.8539 mas, bmaj=1.879 mas, bpa=-4.762 degrees ! Estimated noise=0.254528 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000643437 Jy ! Component: 100 - total flux cleaned = 0.000735498 Jy ! Component: 150 - total flux cleaned = 0.000815157 Jy ! Component: 200 - total flux cleaned = 0.000851516 Jy ! Total flux subtracted in 200 components = 0.000851516 Jy ! Clean residual min=-0.000879 max=0.000901 Jy/beam ! Clean residual mean=0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.786448 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 123 components and 0.786448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.047716Jy sigma=0.669449 ! Fit after self-cal, rms=0.047716Jy sigma=0.669445 ! Inverting map ! Added new window around map position (11.6, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00050857 Jy ! Component: 100 - total flux cleaned = 0.000544734 Jy ! Component: 150 - total flux cleaned = 0.000579211 Jy ! Component: 200 - total flux cleaned = 0.000562216 Jy ! Total flux subtracted in 200 components = 0.000562216 Jy ! Clean residual min=-0.000875 max=0.000848 Jy/beam ! Clean residual mean=-0.000000 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.78701 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 136 components and 0.78701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.047696Jy sigma=0.669219 ! Fit after self-cal, rms=0.047695Jy sigma=0.669213 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.047695Jy sigma=0.669213 ! Fit after self-cal, rms=0.047706Jy sigma=0.669160 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6752 mas, bmaj=1.595 mas, bpa=-5.28 degrees ! Estimated noise=0.482536 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.593217 Jy ! Component: 100 - total flux cleaned = 0.722577 Jy ! Component: 150 - total flux cleaned = 0.752594 Jy ! Component: 200 - total flux cleaned = 0.76458 Jy ! Total flux subtracted in 200 components = 0.76458 Jy ! Clean residual min=-0.002181 max=0.005599 Jy/beam ! Clean residual mean=0.000002 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.76458 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.76458 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8537 mas, bmaj=1.879 mas, bpa=-4.757 degrees ! Estimated noise=0.254603 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00870351 Jy ! Component: 100 - total flux cleaned = 0.0132333 Jy ! Component: 150 - total flux cleaned = 0.01611 Jy ! Component: 200 - total flux cleaned = 0.0181553 Jy ! Total flux subtracted in 200 components = 0.0181553 Jy ! Clean residual min=-0.001181 max=0.001488 Jy/beam ! Clean residual mean=-0.000000 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.782735 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 42 components and 0.782735 Jy ! Inverting map ! Added new window around map position (-0.4, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151064 Jy ! Component: 100 - total flux cleaned = 0.00235274 Jy ! Component: 150 - total flux cleaned = 0.00298093 Jy ! Component: 200 - total flux cleaned = 0.00336883 Jy ! Total flux subtracted in 200 components = 0.00336883 Jy ! Clean residual min=-0.001023 max=0.000989 Jy/beam ! Clean residual mean=-0.000000 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.786104 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 62 components and 0.786104 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.095 mas, bmaj=2.771 mas, bpa=-6.369 degrees ! Estimated noise=0.327884 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133244 Jy ! Component: 100 - total flux cleaned = 0.00169062 Jy ! Component: 150 - total flux cleaned = 0.00183671 Jy ! Component: 200 - total flux cleaned = 0.00190764 Jy ! Total flux subtracted in 200 components = 0.00190764 Jy ! Clean residual min=-0.001026 max=0.001013 Jy/beam ! Clean residual mean=-0.000000 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.788012 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.44281e-05 Jy ! Component: 100 - total flux cleaned = 0.000102252 Jy ! Component: 150 - total flux cleaned = 0.000187274 Jy ! Component: 200 - total flux cleaned = 0.000233511 Jy ! Total flux subtracted in 200 components = 0.000233511 Jy ! Clean residual min=-0.000993 max=0.001001 Jy/beam ! Clean residual mean=-0.000000 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.788245 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 121 components and 0.788245 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8537 mas, bmaj=1.879 mas, bpa=-4.757 degrees ! Estimated noise=0.254603 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.99086e-05 Jy ! Component: 100 - total flux cleaned = -0.000103165 Jy ! Component: 150 - total flux cleaned = -0.000103376 Jy ! Component: 200 - total flux cleaned = -6.39461e-05 Jy ! Total flux subtracted in 200 components = -6.39461e-05 Jy ! Clean residual min=-0.000859 max=0.000839 Jy/beam ! Clean residual mean=-0.000000 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.788181 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 139 components and 0.788181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.047672Jy sigma=0.668952 ! Fit after self-cal, rms=0.047671Jy sigma=0.668930 wmodel J1419+3821_X_map.mod ! Writing 139 model components to file: J1419+3821_X_map.mod wobs J1419+3821_X_uvs.fits ! Writing UV FITS file: J1419+3821_X_uvs.fits wwins J1419+3821_X_map.win ! wwins: Wrote 6 windows to J1419+3821_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170617 Jy ! Component: 100 - total flux cleaned = 0.000273634 Jy ! Component: 150 - total flux cleaned = 0.000316152 Jy ! Component: 200 - total flux cleaned = 0.000398969 Jy ! Component: 250 - total flux cleaned = 0.000479578 Jy ! Component: 300 - total flux cleaned = 0.000505545 Jy ! Component: 350 - total flux cleaned = 0.000505407 Jy ! Component: 400 - total flux cleaned = 0.000543415 Jy ! Component: 450 - total flux cleaned = 0.000556002 Jy ! Component: 500 - total flux cleaned = 0.000617632 Jy ! Component: 550 - total flux cleaned = 0.000666233 Jy ! Component: 600 - total flux cleaned = 0.000726287 Jy ! Component: 650 - total flux cleaned = 0.000738385 Jy ! Component: 700 - total flux cleaned = 0.000785406 Jy ! Component: 750 - total flux cleaned = 0.000831793 Jy ! Component: 800 - total flux cleaned = 0.000854694 Jy ! Component: 850 - total flux cleaned = 0.000900264 Jy ! Component: 900 - total flux cleaned = 0.000956471 Jy ! Component: 950 - total flux cleaned = 0.00102327 Jy ! Component: 1000 - total flux cleaned = 0.00105637 Jy ! Component: 1050 - total flux cleaned = 0.00115481 Jy ! Component: 1100 - total flux cleaned = 0.00123051 Jy ! Component: 1150 - total flux cleaned = 0.00125177 Jy ! Component: 1200 - total flux cleaned = 0.00130496 Jy ! Component: 1250 - total flux cleaned = 0.00137873 Jy ! Component: 1300 - total flux cleaned = 0.0014101 Jy ! Component: 1350 - total flux cleaned = 0.00143086 Jy ! Component: 1400 - total flux cleaned = 0.0015237 Jy ! Component: 1450 - total flux cleaned = 0.0015442 Jy ! Component: 1500 - total flux cleaned = 0.00162532 Jy ! Component: 1550 - total flux cleaned = 0.00162519 Jy ! Component: 1600 - total flux cleaned = 0.0016952 Jy ! Component: 1650 - total flux cleaned = 0.00177471 Jy ! Component: 1700 - total flux cleaned = 0.00180426 Jy ! Component: 1750 - total flux cleaned = 0.00188256 Jy ! Component: 1800 - total flux cleaned = 0.00188265 Jy ! Component: 1850 - total flux cleaned = 0.00192137 Jy ! Component: 1900 - total flux cleaned = 0.00196938 Jy ! Component: 1950 - total flux cleaned = 0.00200756 Jy ! Component: 2000 - total flux cleaned = 0.00207391 Jy ! Component: 2050 - total flux cleaned = 0.00206455 Jy ! Component: 2100 - total flux cleaned = 0.00210195 Jy ! Component: 2150 - total flux cleaned = 0.00212052 Jy ! Component: 2200 - total flux cleaned = 0.00211126 Jy ! Component: 2250 - total flux cleaned = 0.00215711 Jy ! Component: 2300 - total flux cleaned = 0.00219363 Jy ! Component: 2350 - total flux cleaned = 0.0022026 Jy ! Component: 2400 - total flux cleaned = 0.00223871 Jy ! Component: 2450 - total flux cleaned = 0.00222973 Jy ! Component: 2500 - total flux cleaned = 0.00227437 Jy ! Component: 2550 - total flux cleaned = 0.0022478 Jy ! Component: 2600 - total flux cleaned = 0.00230938 Jy ! Component: 2650 - total flux cleaned = 0.00233572 Jy ! Component: 2700 - total flux cleaned = 0.00236191 Jy ! Component: 2750 - total flux cleaned = 0.00235326 Jy ! Component: 2800 - total flux cleaned = 0.00242221 Jy ! Component: 2850 - total flux cleaned = 0.0024737 Jy ! Component: 2900 - total flux cleaned = 0.00248214 Jy ! Component: 2950 - total flux cleaned = 0.00247361 Jy ! Component: 3000 - total flux cleaned = 0.00249051 Jy ! Component: 3050 - total flux cleaned = 0.00250739 Jy ! Component: 3100 - total flux cleaned = 0.00254071 Jy ! Component: 3150 - total flux cleaned = 0.00255737 Jy ! Component: 3200 - total flux cleaned = 0.00255739 Jy ! Component: 3250 - total flux cleaned = 0.00258201 Jy ! Component: 3300 - total flux cleaned = 0.00258206 Jy ! Component: 3350 - total flux cleaned = 0.00258206 Jy ! Component: 3400 - total flux cleaned = 0.00258203 Jy ! Component: 3450 - total flux cleaned = 0.00260629 Jy ! Component: 3500 - total flux cleaned = 0.00260626 Jy ! Component: 3550 - total flux cleaned = 0.00263028 Jy ! Component: 3600 - total flux cleaned = 0.00267006 Jy ! Component: 3650 - total flux cleaned = 0.00268587 Jy ! Component: 3700 - total flux cleaned = 0.00270953 Jy ! Component: 3750 - total flux cleaned = 0.0027252 Jy ! Component: 3800 - total flux cleaned = 0.00271738 Jy ! Component: 3850 - total flux cleaned = 0.00272517 Jy ! Component: 3900 - total flux cleaned = 0.00279482 Jy ! Component: 3950 - total flux cleaned = 0.00280252 Jy ! Component: 4000 - total flux cleaned = 0.0028332 Jy ! Component: 4050 - total flux cleaned = 0.00283326 Jy ! Total flux subtracted in 4096 components = 0.00285599 Jy ! Clean residual min=-0.000466 max=0.000551 Jy/beam ! Clean residual mean=0.000000 rms=0.000135 Jy/beam ! Combined flux in latest and established models = 0.791037 Jy keep ! Adding 345 model components to the UV plane model. ! The established model now contains 484 components and 0.791037 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1419+3821_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8537 x 1.879 at -4.757 degrees (North through East) ! Clean map min=-0.00090014 max=0.76365 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1419+3821_X_map.fits wmodel /vlbi/bp222/temp_maps//J1419+3821_X_map.mod ! Writing 484 model components to file: /vlbi/bp222/temp_maps//J1419+3821_X_map.mod wobs /vlbi/bp222/temp_maps//J1419+3821_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1419+3821_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1419+3821_X_map.win ! wwins: Wrote 7 windows to /vlbi/bp222/temp_maps//J1419+3821_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.763651 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000134787 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.052951 0.052951 0.105902 0.211804 0.423608 0.847216 1.69443 3.38887 6.77773 13.5555 27.1109 54.2219 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.763 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 5665.61 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1419+3821_X_dfm.log closed on Thu Feb 14 22:55:51 2019