! Started logfile: /vlbi/bp222/temp_maps//J1352-2649_X_dfm.log on Thu Feb 14 22:55:03 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1352-2649_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1352-2649_X_uvm.fits ! AN table 1: 24 integrations on 1 of 1 possible baselines. ! AN table 2: 48 integrations on 28 of 28 possible baselines. ! AN table 3: 96 integrations on 28 of 28 possible baselines. ! AN table 4: 27 integrations on 10 of 10 possible baselines. ! AN table 5: 115 integrations on 10 of 10 possible baselines. ! AN table 6: 23 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.833026 visibilities/baseline/integration-bin. ! Found source: J1352-2649 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 59568 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1352-2649_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! A total of 107 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! A total of 107 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! A total of 107 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! A total of 107 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 5. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! A total of 107 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 6. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! A total of 107 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 7. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! A total of 107 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 8. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! A total of 107 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 9. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! A total of 107 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 10. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! A total of 107 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 11. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! A total of 107 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 12. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 39 telescope corrections were flagged in sub-array 2. ! A total of 107 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 10 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.003006Jy sigma=13.888555 ! Fit after self-cal, rms=0.964855Jy sigma=13.366938 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8082 mas, bmaj=2.087 mas, bpa=-5.685 degrees ! Estimated noise=0.525372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.026595 Jy ! Component: 100 - total flux cleaned = 0.0328419 Jy ! Total flux subtracted in 100 components = 0.0328419 Jy ! Clean residual min=-0.002865 max=0.003987 Jy/beam ! Clean residual mean=-0.000007 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0328419 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0328419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062539Jy sigma=0.800002 ! Fit after self-cal, rms=0.061024Jy sigma=0.779240 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440225 Jy ! Component: 100 - total flux cleaned = 0.00642562 Jy ! Total flux subtracted in 100 components = 0.00642562 Jy ! Clean residual min=-0.002834 max=0.003570 Jy/beam ! Clean residual mean=-0.000006 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.0392676 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.0392675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060492Jy sigma=0.769970 ! Fit after self-cal, rms=0.060462Jy sigma=0.769750 ! Inverting map ! Added new window around map position (2, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329143 Jy ! Component: 100 - total flux cleaned = 0.00478553 Jy ! Total flux subtracted in 100 components = 0.00478553 Jy ! Clean residual min=-0.002682 max=0.003195 Jy/beam ! Clean residual mean=-0.000005 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0440531 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 0.0440531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060199Jy sigma=0.765390 ! Fit after self-cal, rms=0.060116Jy sigma=0.763999 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.271 mas, bmaj=3.248 mas, bpa=-4.063 degrees ! Estimated noise=0.218242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038299 Jy ! Component: 100 - total flux cleaned = 0.00586056 Jy ! Component: 150 - total flux cleaned = 0.00704935 Jy ! Component: 200 - total flux cleaned = 0.00766971 Jy ! Total flux subtracted in 200 components = 0.00766971 Jy ! Clean residual min=-0.003418 max=0.004840 Jy/beam ! Clean residual mean=-0.000016 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 0.0517228 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 61 components and 0.0517228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059912Jy sigma=0.760045 ! Fit after self-cal, rms=0.059779Jy sigma=0.758340 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.271 x 3.248 at -4.063 degrees (North through East) ! Clean map min=-0.0032988 max=0.037104 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 0.88 KP 1.42 LA 1.15 ! NL 1.27 OV 1.29 PT 0.84 SC 1.16 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.21 FD 1.18 KP 1.03 LA 1.09 ! MK 1.24 NL 1.50 OV 0.98 PT 0.71 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.08 FD 0.82 KP 1.45 OV 1.13 ! PT 0.74 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 1.12 KP 1.07 NL 0.89 ! OV 1.00 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.11 FD 1.28 HN 0.80 KP 0.83 ! NL 1.29 OV 0.73 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 0.86 KP 1.44 LA 1.13 ! NL 1.32 OV 1.04 PT 0.86 SC 1.13 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.11 FD 1.20 KP 1.02 LA 1.03 ! MK 1.37 NL 1.50 OV 1.05 PT 0.68 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.17 FD 1.07 KP 0.93 OV 0.77 ! PT 1.11 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.96 FD 1.10 KP 1.09 NL 0.79 ! OV 1.01 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.34 FD 1.31 HN 1.10 KP 0.73 ! NL 1.42 OV 0.74 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 0.88 KP 1.34 LA 1.24 ! NL 1.34 OV 1.09 PT 0.84 SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.14 FD 1.21 KP 1.08 LA 0.98 ! MK 1.22 NL 1.47 OV 1.06 PT 0.76 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.31 FD 1.19 KP 0.83 OV 0.68 ! PT 1.27 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.92 FD 1.06 KP 1.03 NL 0.83 ! OV 1.03 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.22 FD 1.36 HN 0.82 KP 0.71 ! NL 0.97 OV 0.74 SC 1.16 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.94 KP 1.45 LA 1.12 ! NL 1.24 OV 1.03 PT 0.85 SC 1.11 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.17 FD 1.31 KP 0.97 LA 1.01 ! MK 1.13 NL 1.45 OV 0.94 PT 0.77 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 1.31 KP 0.70 OV 0.72 ! PT 1.39 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.90 FD 1.08 KP 1.06 NL 0.81 ! OV 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.13 FD 1.22 HN 0.86 KP 0.81 ! NL 1.05 OV 0.67 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 KP 1.50 LA 1.00 ! NL 1.21 OV 0.93 PT 0.90 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.17 FD 1.24 KP 1.05 LA 1.02 ! MK 1.02 NL 1.44 OV 0.94 PT 0.72 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.21 FD 1.09 KP 0.91 OV 0.71 ! PT 1.12 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.88 FD 1.06 KP 1.15 NL 0.77 ! OV 1.06 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.34 FD 1.26 HN 1.02 KP 0.79 ! NL 0.85 OV 0.73 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.07 KP 1.32 LA 1.06 ! NL 1.34 OV 0.97 PT 0.90 SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.88 FD 1.22 KP 0.99 LA 1.00 ! MK 1.10 NL 1.43 OV 0.92 PT 0.76 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.13 FD 1.23 KP 0.80 OV 0.65 ! PT 1.41 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.88 FD 1.00 KP 1.01 NL 0.79 ! OV 1.03 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.20 FD 1.40 HN 0.89 KP 0.79 ! NL 0.88 OV 0.71 SC 1.09 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.92 KP 1.16 LA 1.14 ! NL 1.33 OV 1.03 PT 0.90 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.13 FD 1.16 KP 1.00 LA 0.94 ! MK 1.24 NL 1.53 OV 0.88 PT 0.74 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.11 FD 1.21 KP 0.90 OV 0.66 ! PT 1.36 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.92 FD 0.99 KP 1.12 NL 0.77 ! OV 0.92 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.05 FD 1.31 HN 0.85 KP 0.92 ! NL 1.02 OV 0.74 SC 0.89 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.91 KP 1.38 LA 1.22 ! NL 1.11 OV 0.97 PT 0.94 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 1.20 KP 1.02 LA 0.95 ! MK 0.94 NL 1.63 OV 0.91 PT 0.72 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 FD 1.02 KP 0.79 OV 0.73 ! PT 1.31 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.89 FD 1.00 KP 1.09 NL 0.76 ! OV 1.01 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.07 FD 1.19 HN 0.89 KP 0.75 ! NL 1.17 OV 0.71 SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.79 FD 1.06 KP 1.39 LA 1.13 ! NL 1.24 OV 0.94 PT 0.97 SC 0.82 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.23 KP 1.01 LA 0.93 ! MK 1.21 NL 1.23 OV 0.89 PT 0.75 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 FD 0.91 KP 0.84 OV 0.81 ! PT 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.96 FD 0.93 KP 1.13 NL 0.79 ! OV 0.92 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.11 FD 1.20 HN 0.81 KP 0.77 ! NL 1.24 OV 0.65 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.82 FD 0.90 KP 1.40 LA 1.27 ! NL 1.28 OV 1.00 PT 0.94 SC 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.10 KP 1.00 LA 0.98 ! MK 0.95 NL 1.40 OV 0.96 PT 0.68 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.26 KP 0.81 OV 0.66 ! PT 1.16 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.84 FD 1.01 KP 1.07 NL 0.73 ! OV 1.02 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.05 FD 1.33 HN 0.82 KP 0.69 ! NL 1.35 OV 0.74 SC 0.80 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.81 FD 0.98 KP 1.27 LA 1.26 ! NL 1.09 OV 0.93 PT 0.82 SC 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.08 KP 1.11 LA 0.86 ! MK 0.93 NL 1.37 OV 0.91 PT 0.74 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.83 FD 0.90 KP 0.96 OV 0.75 ! PT 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.82 FD 0.95 KP 1.08 NL 0.70 ! OV 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.91 FD 1.17 HN 0.70 KP 0.81 ! NL 0.72 OV 0.69 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.76 FD 1.14 KP 1.18 LA 1.16 ! NL 1.17 OV 0.97 PT 0.99 SC 0.76 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 1.18 KP 1.09 LA 0.95 ! MK 0.83 NL 1.27 OV 0.96 PT 0.66 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.77 FD 0.83 KP 0.86 OV 0.76 ! PT 0.95 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.82 FD 0.89 KP 0.98 NL 0.79 ! OV 0.99 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.81 FD 1.01 HN 0.72 KP 0.82 ! NL 1.16 OV 0.73 SC 0.77 ! ! ! Fit before self-cal, rms=0.059779Jy sigma=0.758340 ! Fit after self-cal, rms=0.060273Jy sigma=0.745280 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.29 mas, bmaj=3.311 mas, bpa=-2.954 degrees ! Estimated noise=0.216899 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000655253 Jy ! Component: 100 - total flux cleaned = 0.000624325 Jy ! Component: 150 - total flux cleaned = 0.000596149 Jy ! Component: 200 - total flux cleaned = 0.000552626 Jy ! Total flux subtracted in 200 components = 0.000552626 Jy ! Clean residual min=-0.002814 max=0.004163 Jy/beam ! Clean residual mean=-0.000010 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.0522754 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 69 components and 0.0522754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060235Jy sigma=0.744593 ! Fit after self-cal, rms=0.060648Jy sigma=0.740913 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060648Jy sigma=0.740913 ! Fit after self-cal, rms=0.065111Jy sigma=0.735550 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.29 mas, bmaj=3.335 mas, bpa=-2.4 degrees ! Estimated noise=0.218549 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664885 Jy ! Component: 100 - total flux cleaned = 0.000718686 Jy ! Component: 150 - total flux cleaned = 0.00073475 Jy ! Component: 200 - total flux cleaned = 0.000734467 Jy ! Total flux subtracted in 200 components = 0.000734467 Jy ! Clean residual min=-0.002366 max=0.003810 Jy/beam ! Clean residual mean=-0.000010 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.0530099 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 72 components and 0.0530099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065092Jy sigma=0.735212 ! Fit after self-cal, rms=0.065461Jy sigma=0.733830 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.2, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322381 Jy ! Component: 100 - total flux cleaned = 0.00481461 Jy ! Component: 150 - total flux cleaned = 0.00585927 Jy ! Component: 200 - total flux cleaned = 0.0064006 Jy ! Total flux subtracted in 200 components = 0.0064006 Jy ! Clean residual min=-0.002037 max=0.002957 Jy/beam ! Clean residual mean=-0.000006 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.0594105 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 107 components and 0.0594105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065294Jy sigma=0.730794 ! Fit after self-cal, rms=0.065154Jy sigma=0.729630 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065154Jy sigma=0.729630 ! Fit after self-cal, rms=0.066145Jy sigma=0.725593 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.286 mas, bmaj=3.342 mas, bpa=-2.438 degrees ! Estimated noise=0.216179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219515 Jy ! Component: 100 - total flux cleaned = 0.00319119 Jy ! Component: 150 - total flux cleaned = 0.00350974 Jy ! Component: 200 - total flux cleaned = 0.0037491 Jy ! Total flux subtracted in 200 components = 0.0037491 Jy ! Clean residual min=-0.001483 max=0.002745 Jy/beam ! Clean residual mean=-0.000005 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0631596 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 124 components and 0.0631596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066072Jy sigma=0.724105 ! Fit after self-cal, rms=0.066226Jy sigma=0.722660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.2, 5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219894 Jy ! Component: 100 - total flux cleaned = 0.00349859 Jy ! Component: 150 - total flux cleaned = 0.00439531 Jy ! Component: 200 - total flux cleaned = 0.00484159 Jy ! Total flux subtracted in 200 components = 0.00484159 Jy ! Clean residual min=-0.001377 max=0.001936 Jy/beam ! Clean residual mean=-0.000004 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0680012 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 155 components and 0.0680012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066131Jy sigma=0.721490 ! Fit after self-cal, rms=0.066076Jy sigma=0.721080 ! Inverting map ! Added new window around map position (44.8, 9.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185272 Jy ! Component: 100 - total flux cleaned = 0.00294923 Jy ! Component: 150 - total flux cleaned = 0.00373436 Jy ! Component: 200 - total flux cleaned = 0.00418938 Jy ! Total flux subtracted in 200 components = 0.00418938 Jy ! Clean residual min=-0.001230 max=0.001535 Jy/beam ! Clean residual mean=-0.000003 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0721906 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 182 components and 0.0721906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066008Jy sigma=0.720221 ! Fit after self-cal, rms=0.065935Jy sigma=0.719852 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065935Jy sigma=0.719852 ! Fit after self-cal, rms=0.065669Jy sigma=0.717625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.592 mas, bmaj=6.021 mas, bpa=1.343 degrees ! Estimated noise=0.233083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183573 Jy ! Component: 100 - total flux cleaned = 0.00285167 Jy ! Component: 150 - total flux cleaned = 0.00346458 Jy ! Component: 200 - total flux cleaned = 0.00391847 Jy ! Total flux subtracted in 200 components = 0.00391847 Jy ! Clean residual min=-0.001243 max=0.001624 Jy/beam ! Clean residual mean=-0.000004 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.076109 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 221 components and 0.076109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065624Jy sigma=0.716777 ! Fit after self-cal, rms=0.065666Jy sigma=0.716180 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106936 Jy ! Component: 100 - total flux cleaned = 0.0015102 Jy ! Component: 150 - total flux cleaned = 0.00187487 Jy ! Component: 200 - total flux cleaned = 0.00216375 Jy ! Total flux subtracted in 200 components = 0.00216375 Jy ! Clean residual min=-0.001195 max=0.001667 Jy/beam ! Clean residual mean=-0.000004 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0782728 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 239 components and 0.0782728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065647Jy sigma=0.715942 ! Fit after self-cal, rms=0.065611Jy sigma=0.715827 ! Inverting map ! Added new window around map position (6.6, -51.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157678 Jy ! Component: 100 - total flux cleaned = 0.0020281 Jy ! Component: 150 - total flux cleaned = 0.00222769 Jy ! Component: 200 - total flux cleaned = 0.00230189 Jy ! Total flux subtracted in 200 components = 0.00230189 Jy ! Clean residual min=-0.001318 max=0.001515 Jy/beam ! Clean residual mean=-0.000003 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0805747 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 270 components and 0.0805746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065566Jy sigma=0.715421 ! Fit after self-cal, rms=0.065552Jy sigma=0.715232 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.291 mas, bmaj=3.364 mas, bpa=-2.421 degrees ! Estimated noise=0.212159 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.291 x 3.364 at -2.421 degrees (North through East) ! Clean map min=-0.001033 max=0.035863 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8208 mas, bmaj=2.142 mas, bpa=-3.007 degrees ! Estimated noise=0.525465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272596 Jy ! Component: 100 - total flux cleaned = 0.0360056 Jy ! Component: 150 - total flux cleaned = 0.041964 Jy ! Component: 200 - total flux cleaned = 0.0465924 Jy ! Total flux subtracted in 200 components = 0.0465924 Jy ! Clean residual min=-0.002339 max=0.002775 Jy/beam ! Clean residual mean=-0.000005 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.0465924 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0465924 Jy ! Inverting map and beam ! Estimated beam: bmin=1.291 mas, bmaj=3.364 mas, bpa=-2.421 degrees ! Estimated noise=0.212159 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00584193 Jy ! Component: 100 - total flux cleaned = 0.010301 Jy ! Component: 150 - total flux cleaned = 0.0139041 Jy ! Component: 200 - total flux cleaned = 0.0168799 Jy ! Total flux subtracted in 200 components = 0.0168799 Jy ! Clean residual min=-0.001638 max=0.002316 Jy/beam ! Clean residual mean=-0.000010 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0634724 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 65 components and 0.0634724 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.592 mas, bmaj=6.021 mas, bpa=1.343 degrees ! Estimated noise=0.233083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329274 Jy ! Component: 100 - total flux cleaned = 0.0058663 Jy ! Component: 150 - total flux cleaned = 0.00796604 Jy ! Component: 200 - total flux cleaned = 0.00970719 Jy ! Total flux subtracted in 200 components = 0.00970719 Jy ! Clean residual min=-0.001554 max=0.001771 Jy/beam ! Clean residual mean=-0.000009 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0731796 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145864 Jy ! Component: 100 - total flux cleaned = 0.00269661 Jy ! Component: 150 - total flux cleaned = 0.00376524 Jy ! Component: 200 - total flux cleaned = 0.00466126 Jy ! Total flux subtracted in 200 components = 0.00466126 Jy ! Clean residual min=-0.001331 max=0.001479 Jy/beam ! Clean residual mean=-0.000006 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0778408 Jy ! Adding 127 model components to the UV plane model. ! The established model now contains 180 components and 0.0778408 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.291 mas, bmaj=3.364 mas, bpa=-2.421 degrees ! Estimated noise=0.212159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000827523 Jy ! Component: 100 - total flux cleaned = 0.00129483 Jy ! Component: 150 - total flux cleaned = 0.00162531 Jy ! Component: 200 - total flux cleaned = 0.00184726 Jy ! Total flux subtracted in 200 components = 0.00184726 Jy ! Clean residual min=-0.001141 max=0.001285 Jy/beam ! Clean residual mean=-0.000003 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.0796881 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 213 components and 0.0796881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065537Jy sigma=0.715588 ! Fit after self-cal, rms=0.065518Jy sigma=0.715145 wmodel J1352-2649_X_map.mod ! Writing 213 model components to file: J1352-2649_X_map.mod wobs J1352-2649_X_uvs.fits ! Writing UV FITS file: J1352-2649_X_uvs.fits wwins J1352-2649_X_map.win ! wwins: Wrote 6 windows to J1352-2649_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000490211 Jy ! Component: 100 - total flux cleaned = 0.000712138 Jy ! Component: 150 - total flux cleaned = 0.000884635 Jy ! Component: 200 - total flux cleaned = 0.00101269 Jy ! Component: 250 - total flux cleaned = 0.00111772 Jy ! Component: 300 - total flux cleaned = 0.00118546 Jy ! Component: 350 - total flux cleaned = 0.00118562 Jy ! Component: 400 - total flux cleaned = 0.00121825 Jy ! Component: 450 - total flux cleaned = 0.00128168 Jy ! Component: 500 - total flux cleaned = 0.00132812 Jy ! Component: 550 - total flux cleaned = 0.0014041 Jy ! Component: 600 - total flux cleaned = 0.00146343 Jy ! Component: 650 - total flux cleaned = 0.00144875 Jy ! Component: 700 - total flux cleaned = 0.00144874 Jy ! Component: 750 - total flux cleaned = 0.00142038 Jy ! Component: 800 - total flux cleaned = 0.00139223 Jy ! Component: 850 - total flux cleaned = 0.00130928 Jy ! Component: 900 - total flux cleaned = 0.00122769 Jy ! Component: 950 - total flux cleaned = 0.00116055 Jy ! Component: 1000 - total flux cleaned = 0.00118695 Jy ! Component: 1050 - total flux cleaned = 0.00112126 Jy ! Component: 1100 - total flux cleaned = 0.00109528 Jy ! Component: 1150 - total flux cleaned = 0.00103116 Jy ! Component: 1200 - total flux cleaned = 0.00101847 Jy ! Component: 1250 - total flux cleaned = 0.000955986 Jy ! Component: 1300 - total flux cleaned = 0.000968466 Jy ! Component: 1350 - total flux cleaned = 0.000919383 Jy ! Component: 1400 - total flux cleaned = 0.000943919 Jy ! Component: 1450 - total flux cleaned = 0.000919847 Jy ! Component: 1500 - total flux cleaned = 0.000943739 Jy ! Component: 1550 - total flux cleaned = 0.000920079 Jy ! Component: 1600 - total flux cleaned = 0.000908482 Jy ! Component: 1650 - total flux cleaned = 0.000943181 Jy ! Component: 1700 - total flux cleaned = 0.000908974 Jy ! Component: 1750 - total flux cleaned = 0.00089778 Jy ! Component: 1800 - total flux cleaned = 0.000931547 Jy ! Component: 1850 - total flux cleaned = 0.000898065 Jy ! Component: 1900 - total flux cleaned = 0.000898084 Jy ! Component: 1950 - total flux cleaned = 0.000908978 Jy ! Component: 2000 - total flux cleaned = 0.000908822 Jy ! Component: 2050 - total flux cleaned = 0.000908799 Jy ! Component: 2100 - total flux cleaned = 0.000919418 Jy ! Component: 2150 - total flux cleaned = 0.000908705 Jy ! Component: 2200 - total flux cleaned = 0.000919334 Jy ! Component: 2250 - total flux cleaned = 0.000950697 Jy ! Component: 2300 - total flux cleaned = 0.000971365 Jy ! Component: 2350 - total flux cleaned = 0.000961028 Jy ! Component: 2400 - total flux cleaned = 0.000940736 Jy ! Component: 2450 - total flux cleaned = 0.00101175 Jy ! Component: 2500 - total flux cleaned = 0.000931297 Jy ! Component: 2550 - total flux cleaned = 0.000941483 Jy ! Component: 2600 - total flux cleaned = 0.000931697 Jy ! Component: 2650 - total flux cleaned = 0.000941439 Jy ! Component: 2700 - total flux cleaned = 0.000921817 Jy ! Component: 2750 - total flux cleaned = 0.000883059 Jy ! Component: 2800 - total flux cleaned = 0.000902353 Jy ! Component: 2850 - total flux cleaned = 0.000892768 Jy ! Component: 2900 - total flux cleaned = 0.000873695 Jy ! Component: 2950 - total flux cleaned = 0.000816869 Jy ! Component: 3000 - total flux cleaned = 0.000854466 Jy ! Component: 3050 - total flux cleaned = 0.000845119 Jy ! Component: 3100 - total flux cleaned = 0.000826596 Jy ! Component: 3150 - total flux cleaned = 0.000798933 Jy ! Component: 3200 - total flux cleaned = 0.000808195 Jy ! Component: 3250 - total flux cleaned = 0.000744398 Jy ! Component: 3300 - total flux cleaned = 0.000789655 Jy ! Component: 3350 - total flux cleaned = 0.00077169 Jy ! Component: 3400 - total flux cleaned = 0.000735886 Jy ! Component: 3450 - total flux cleaned = 0.000726957 Jy ! Component: 3500 - total flux cleaned = 0.000682689 Jy ! Component: 3550 - total flux cleaned = 0.000647555 Jy ! Component: 3600 - total flux cleaned = 0.0006476 Jy ! Component: 3650 - total flux cleaned = 0.000638823 Jy ! Component: 3700 - total flux cleaned = 0.000621509 Jy ! Component: 3750 - total flux cleaned = 0.000570046 Jy ! Component: 3800 - total flux cleaned = 0.000604251 Jy ! Component: 3850 - total flux cleaned = 0.000604266 Jy ! Component: 3900 - total flux cleaned = 0.000578838 Jy ! Component: 3950 - total flux cleaned = 0.000570506 Jy ! Component: 4000 - total flux cleaned = 0.00054542 Jy ! Component: 4050 - total flux cleaned = 0.000545425 Jy ! Total flux subtracted in 4096 components = 0.000512434 Jy ! Clean residual min=-0.000495 max=0.000476 Jy/beam ! Clean residual mean=-0.000001 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.0802005 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 524 components and 0.0802005 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1352-2649_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.291 x 3.364 at -2.421 degrees (North through East) ! Clean map min=-0.00081077 max=0.034683 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1352-2649_X_map.fits wmodel /vlbi/bp222/temp_maps//J1352-2649_X_map.mod ! Writing 524 model components to file: /vlbi/bp222/temp_maps//J1352-2649_X_map.mod wobs /vlbi/bp222/temp_maps//J1352-2649_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1352-2649_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1352-2649_X_map.win ! wwins: Wrote 7 windows to /vlbi/bp222/temp_maps//J1352-2649_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0346831 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172355 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.49083 1.49083 2.98165 5.9633 11.9266 23.8532 47.7064 95.4128 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.034 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 201.23 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1352-2649_X_dfm.log closed on Thu Feb 14 22:55:12 2019