! Started logfile: /vlbi/bp222/temp_maps//J1349-3056_X_dfm.log on Thu Feb 14 22:54:48 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1349-3056_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1349-3056_X_uvm.fits ! AN table 1: 93 integrations on 45 of 45 possible baselines. ! AN table 2: 22 integrations on 15 of 15 possible baselines. ! AN table 3: 66 integrations on 21 of 21 possible baselines. ! AN table 4: 23 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.791714 visibilities/baseline/integration-bin. ! Found source: J1349-3056 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 58248 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1349-3056_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 132 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 132 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 132 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 132 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 132 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 132 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 132 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 132 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 132 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 132 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 132 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.014950Jy sigma=12.281283 ! Fit after self-cal, rms=0.853559Jy sigma=10.158501 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6158 mas, bmaj=1.766 mas, bpa=-5.547 degrees ! Estimated noise=0.609336 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108948 Jy ! Component: 100 - total flux cleaned = 0.135885 Jy ! Total flux subtracted in 100 components = 0.135885 Jy ! Clean residual min=-0.006880 max=0.013568 Jy/beam ! Clean residual mean=-0.000004 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 0.135885 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.135885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088866Jy sigma=0.978312 ! Fit after self-cal, rms=0.088795Jy sigma=0.977775 ! Inverting map ! Added new window around map position (1.4, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146629 Jy ! Component: 100 - total flux cleaned = 0.0242952 Jy ! Total flux subtracted in 100 components = 0.0242952 Jy ! Clean residual min=-0.005985 max=0.009692 Jy/beam ! Clean residual mean=-0.000002 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.16018 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.16018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084331Jy sigma=0.894594 ! Fit after self-cal, rms=0.083932Jy sigma=0.891113 ! Inverting map ! Added new window around map position (-0.6, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00974149 Jy ! Component: 100 - total flux cleaned = 0.0165113 Jy ! Total flux subtracted in 100 components = 0.0165113 Jy ! Clean residual min=-0.004479 max=0.007920 Jy/beam ! Clean residual mean=-0.000001 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.176692 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.176692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081878Jy sigma=0.853044 ! Fit after self-cal, rms=0.081766Jy sigma=0.852245 ! Inverting map ! Added new window around map position (2.2, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00755485 Jy ! Component: 100 - total flux cleaned = 0.0127147 Jy ! Total flux subtracted in 100 components = 0.0127147 Jy ! Clean residual min=-0.003735 max=0.005269 Jy/beam ! Clean residual mean=0.000001 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.189406 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.189406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080763Jy sigma=0.834040 ! Fit after self-cal, rms=0.080672Jy sigma=0.832966 ! Inverting map ! Added new window around map position (1.2, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00513833 Jy ! Component: 100 - total flux cleaned = 0.00863236 Jy ! Total flux subtracted in 100 components = 0.00863236 Jy ! Clean residual min=-0.003232 max=0.004413 Jy/beam ! Clean residual mean=0.000002 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.198039 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.198039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080145Jy sigma=0.823966 ! Fit after self-cal, rms=0.080092Jy sigma=0.823312 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8586 mas, bmaj=2.437 mas, bpa=-9.59 degrees ! Estimated noise=0.257268 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00566851 Jy ! Component: 100 - total flux cleaned = 0.00874001 Jy ! Component: 150 - total flux cleaned = 0.0106955 Jy ! Component: 200 - total flux cleaned = 0.0115373 Jy ! Total flux subtracted in 200 components = 0.0115373 Jy ! Clean residual min=-0.002791 max=0.003088 Jy/beam ! Clean residual mean=0.000005 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.209576 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 55 components and 0.209576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079763Jy sigma=0.816624 ! Fit after self-cal, rms=0.079734Jy sigma=0.816296 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8586 x 2.437 at -9.59 degrees (North through East) ! Clean map min=-0.0025514 max=0.14424 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 1.13 KP 1.09 ! LA 1.03 MK 1.10 NL 1.13 OV 0.94 ! PT 0.98 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.10 KP 0.98 NL 0.90 ! OV 0.95 PT 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.98 HN 1.26 KP 0.98 ! MK 0.98 NL 0.84 OV 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.90 HN 1.16 KP 1.10 NL 1.45 ! SC 0.85 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 1.12 KP 1.08 ! LA 1.02 MK 1.07 NL 1.13 OV 0.92 ! PT 0.97 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.02 KP 1.01 NL 1.03 ! OV 0.98 PT 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.98 HN 1.26 KP 0.97 ! MK 0.97 NL 0.84 OV 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.95 HN 1.26 KP 1.09 NL 1.66 ! SC 0.85 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 1.16 KP 1.06 ! LA 0.98 MK 1.09 NL 1.15 OV 0.94 ! PT 0.97 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.15 KP 0.98 NL 0.91 ! OV 0.99 PT 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.99 HN 1.27 KP 1.00 ! MK 0.95 NL 0.86 OV 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.98 HN 1.33 KP 1.04 NL 1.35 ! SC 0.91 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 1.12 KP 1.08 ! LA 1.02 MK 1.07 NL 1.17 OV 0.94 ! PT 0.98 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.08 KP 0.99 NL 0.95 ! OV 1.01 PT 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.98 HN 1.26 KP 0.98 ! MK 0.95 NL 0.84 OV 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 HN 1.26 KP 0.99 NL 1.34 ! SC 0.94 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.08 KP 1.08 ! LA 1.01 MK 1.06 NL 1.13 OV 0.93 ! PT 0.99 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.05 KP 1.00 NL 0.87 ! OV 0.99 PT 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.97 HN 1.21 KP 0.99 ! MK 0.97 NL 0.84 OV 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.86 HN 1.21 KP 1.07 NL 1.35 ! SC 0.94 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.08 KP 1.09 ! LA 1.01 MK 1.07 NL 1.16 OV 0.93 ! PT 0.99 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 HN 1.11 KP 0.99 NL 0.89 ! OV 0.98 PT 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.97 HN 1.31 KP 0.97 ! MK 0.98 NL 0.83 OV 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 HN 1.30 KP 1.01 NL 1.23 ! SC 0.85 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.03 KP 1.09 ! LA 1.03 MK 1.06 NL 1.16 OV 0.91 ! PT 0.97 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HN 1.05 KP 0.97 NL 0.91 ! OV 0.91 PT 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.95 HN 1.18 KP 0.98 ! MK 0.96 NL 0.84 OV 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.92 HN 1.25 KP 1.08 NL 1.50 ! SC 0.78 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.04 KP 1.07 ! LA 1.01 MK 1.06 NL 1.13 OV 0.92 ! PT 0.98 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.13 KP 0.97 NL 0.87 ! OV 0.91 PT 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.96 HN 1.35 KP 0.97 ! MK 0.95 NL 0.81 OV 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 HN 1.07 KP 0.99 NL 1.45 ! SC 0.80 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.06 KP 1.06 ! LA 1.06 MK 1.06 NL 1.14 OV 0.93 ! PT 0.97 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.11 KP 0.97 NL 0.91 ! OV 1.00 PT 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.97 HN 1.21 KP 0.96 ! MK 0.99 NL 0.81 OV 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.93 HN 1.27 KP 1.03 NL 1.44 ! SC 0.89 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.03 KP 1.06 ! LA 1.06 MK 1.04 NL 1.10 OV 0.91 ! PT 0.96 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.02 KP 0.99 NL 0.87 ! OV 0.95 PT 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.96 HN 1.15 KP 0.94 ! MK 0.95 NL 0.85 OV 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 HN 1.25 KP 1.01 NL 1.23 ! SC 0.92 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.04 KP 1.07 ! LA 1.01 MK 1.06 NL 1.15 OV 0.89 ! PT 0.97 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 0.96 KP 1.01 NL 0.88 ! OV 0.99 PT 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.98 HN 1.14 KP 0.95 ! MK 0.95 NL 0.81 OV 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.94 HN 1.35 KP 1.04 NL 1.26 ! SC 0.93 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.01 KP 1.05 ! LA 1.01 MK 1.06 NL 1.13 OV 0.91 ! PT 0.96 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 1.08 KP 0.96 NL 0.84 ! OV 0.99 PT 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.94 HN 1.21 KP 0.95 ! MK 0.94 NL 0.84 OV 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.81 HN 1.21 KP 1.02 NL 1.41 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.079734Jy sigma=0.816296 ! Fit after self-cal, rms=0.081339Jy sigma=0.790672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8643 mas, bmaj=2.436 mas, bpa=-9.38 degrees ! Estimated noise=0.258307 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00089183 Jy ! Component: 100 - total flux cleaned = -0.00105855 Jy ! Component: 150 - total flux cleaned = -0.00115348 Jy ! Component: 200 - total flux cleaned = -0.00119569 Jy ! Total flux subtracted in 200 components = -0.00119569 Jy ! Clean residual min=-0.001415 max=0.001394 Jy/beam ! Clean residual mean=0.000001 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.20838 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 68 components and 0.20838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081252Jy sigma=0.789833 ! Fit after self-cal, rms=0.081405Jy sigma=0.789425 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081405Jy sigma=0.789425 ! Fit after self-cal, rms=0.082011Jy sigma=0.787508 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8655 mas, bmaj=2.438 mas, bpa=-9.424 degrees ! Estimated noise=0.25837 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000925789 Jy ! Component: 100 - total flux cleaned = -0.00103188 Jy ! Component: 150 - total flux cleaned = -0.00109192 Jy ! Component: 200 - total flux cleaned = -0.00114772 Jy ! Total flux subtracted in 200 components = -0.00114772 Jy ! Clean residual min=-0.001252 max=0.001269 Jy/beam ! Clean residual mean=0.000001 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.207233 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 72 components and 0.207233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081974Jy sigma=0.787135 ! Fit after self-cal, rms=0.081984Jy sigma=0.787077 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.41205e-05 Jy ! Component: 100 - total flux cleaned = -0.000146824 Jy ! Component: 150 - total flux cleaned = -0.000145627 Jy ! Component: 200 - total flux cleaned = -0.000145741 Jy ! Total flux subtracted in 200 components = -0.000145741 Jy ! Clean residual min=-0.001223 max=0.001228 Jy/beam ! Clean residual mean=0.000001 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.207087 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.207087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081967Jy sigma=0.786911 ! Fit after self-cal, rms=0.081963Jy sigma=0.786886 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081963Jy sigma=0.786886 ! Fit after self-cal, rms=0.082650Jy sigma=0.784876 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8659 mas, bmaj=2.435 mas, bpa=-9.416 degrees ! Estimated noise=0.257977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000392302 Jy ! Component: 100 - total flux cleaned = -0.000431226 Jy ! Component: 150 - total flux cleaned = -0.000484623 Jy ! Component: 200 - total flux cleaned = -0.000517752 Jy ! Total flux subtracted in 200 components = -0.000517752 Jy ! Clean residual min=-0.001133 max=0.001217 Jy/beam ! Clean residual mean=0.000000 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.206569 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 81 components and 0.206569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082640Jy sigma=0.784777 ! Fit after self-cal, rms=0.082655Jy sigma=0.784748 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116024 Jy ! Component: 100 - total flux cleaned = 0.00179044 Jy ! Component: 150 - total flux cleaned = 0.00207781 Jy ! Component: 200 - total flux cleaned = 0.00214384 Jy ! Total flux subtracted in 200 components = 0.00214384 Jy ! Clean residual min=-0.001114 max=0.001021 Jy/beam ! Clean residual mean=0.000000 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.208713 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 103 components and 0.208713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082637Jy sigma=0.784470 ! Fit after self-cal, rms=0.082635Jy sigma=0.784453 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082635Jy sigma=0.784453 ! Fit after self-cal, rms=0.082711Jy sigma=0.784409 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.213 mas, bmaj=5.914 mas, bpa=-4.462 degrees ! Estimated noise=0.307752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216364 Jy ! Component: 100 - total flux cleaned = 0.000321452 Jy ! Component: 150 - total flux cleaned = 0.000277824 Jy ! Component: 200 - total flux cleaned = 0.000238348 Jy ! Total flux subtracted in 200 components = 0.000238348 Jy ! Clean residual min=-0.001168 max=0.000885 Jy/beam ! Clean residual mean=0.000001 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.208951 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 117 components and 0.208951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082706Jy sigma=0.784353 ! Fit after self-cal, rms=0.082708Jy sigma=0.784342 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.46861e-05 Jy ! Component: 100 - total flux cleaned = 5.14982e-05 Jy ! Component: 150 - total flux cleaned = 4.02088e-05 Jy ! Component: 200 - total flux cleaned = 1.98555e-05 Jy ! Total flux subtracted in 200 components = 1.98555e-05 Jy ! Clean residual min=-0.001139 max=0.000887 Jy/beam ! Clean residual mean=0.000001 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.208971 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 124 components and 0.208971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082706Jy sigma=0.784336 ! Fit after self-cal, rms=0.082706Jy sigma=0.784330 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8657 mas, bmaj=2.433 mas, bpa=-9.399 degrees ! Estimated noise=0.257667 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8657 x 2.433 at -9.399 degrees (North through East) ! Clean map min=-0.00096595 max=0.14462 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6186 mas, bmaj=1.753 mas, bpa=-5.135 degrees ! Estimated noise=0.606006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10942 Jy ! Component: 100 - total flux cleaned = 0.138569 Jy ! Component: 150 - total flux cleaned = 0.155083 Jy ! Component: 200 - total flux cleaned = 0.166644 Jy ! Total flux subtracted in 200 components = 0.166644 Jy ! Clean residual min=-0.003287 max=0.007763 Jy/beam ! Clean residual mean=-0.000004 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.166644 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.166644 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8657 mas, bmaj=2.433 mas, bpa=-9.399 degrees ! Estimated noise=0.257667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157976 Jy ! Component: 100 - total flux cleaned = 0.0244889 Jy ! Component: 150 - total flux cleaned = 0.0298071 Jy ! Component: 200 - total flux cleaned = 0.0331647 Jy ! Total flux subtracted in 200 components = 0.0331647 Jy ! Clean residual min=-0.001316 max=0.001768 Jy/beam ! Clean residual mean=-0.000001 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.199808 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 59 components and 0.199808 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217684 Jy ! Component: 100 - total flux cleaned = 0.0037232 Jy ! Component: 150 - total flux cleaned = 0.00493249 Jy ! Component: 200 - total flux cleaned = 0.0059072 Jy ! Total flux subtracted in 200 components = 0.0059072 Jy ! Clean residual min=-0.001036 max=0.001015 Jy/beam ! Clean residual mean=-0.000000 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.205715 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 81 components and 0.205715 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.213 mas, bmaj=5.914 mas, bpa=-4.462 degrees ! Estimated noise=0.307752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109557 Jy ! Component: 100 - total flux cleaned = 0.00183318 Jy ! Component: 150 - total flux cleaned = 0.00236818 Jy ! Component: 200 - total flux cleaned = 0.00258971 Jy ! Total flux subtracted in 200 components = 0.00258971 Jy ! Clean residual min=-0.001205 max=0.000878 Jy/beam ! Clean residual mean=0.000001 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.208305 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.95036e-05 Jy ! Component: 100 - total flux cleaned = 0.000130133 Jy ! Component: 150 - total flux cleaned = 0.000180553 Jy ! Component: 200 - total flux cleaned = 0.000214998 Jy ! Total flux subtracted in 200 components = 0.000214998 Jy ! Clean residual min=-0.001162 max=0.000862 Jy/beam ! Clean residual mean=0.000001 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.20852 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 109 components and 0.20852 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8657 mas, bmaj=2.433 mas, bpa=-9.399 degrees ! Estimated noise=0.257667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000273604 Jy ! Component: 100 - total flux cleaned = -0.000357937 Jy ! Component: 150 - total flux cleaned = -0.000339942 Jy ! Component: 200 - total flux cleaned = -0.000339564 Jy ! Total flux subtracted in 200 components = -0.000339564 Jy ! Clean residual min=-0.001030 max=0.000965 Jy/beam ! Clean residual mean=0.000000 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.208181 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 127 components and 0.208181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082711Jy sigma=0.784373 ! Fit after self-cal, rms=0.082704Jy sigma=0.784325 wmodel J1349-3056_X_map.mod ! Writing 127 model components to file: J1349-3056_X_map.mod wobs J1349-3056_X_uvs.fits ! Writing UV FITS file: J1349-3056_X_uvs.fits wwins J1349-3056_X_map.win ! wwins: Wrote 7 windows to J1349-3056_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000153264 Jy ! Component: 100 - total flux cleaned = -0.000251616 Jy ! Component: 150 - total flux cleaned = -0.000373202 Jy ! Component: 200 - total flux cleaned = -0.000460358 Jy ! Component: 250 - total flux cleaned = -0.000516328 Jy ! Component: 300 - total flux cleaned = -0.000475509 Jy ! Component: 350 - total flux cleaned = -0.000489217 Jy ! Component: 400 - total flux cleaned = -0.000476539 Jy ! Component: 450 - total flux cleaned = -0.000489372 Jy ! Component: 500 - total flux cleaned = -0.000451766 Jy ! Component: 550 - total flux cleaned = -0.000402583 Jy ! Component: 600 - total flux cleaned = -0.00036631 Jy ! Component: 650 - total flux cleaned = -0.00031863 Jy ! Component: 700 - total flux cleaned = -0.000307024 Jy ! Component: 750 - total flux cleaned = -0.000283747 Jy ! Component: 800 - total flux cleaned = -0.000272297 Jy ! Component: 850 - total flux cleaned = -0.000226791 Jy ! Component: 900 - total flux cleaned = -0.000215654 Jy ! Component: 950 - total flux cleaned = -0.000193361 Jy ! Component: 1000 - total flux cleaned = -0.000149311 Jy ! Component: 1050 - total flux cleaned = -0.000138384 Jy ! Component: 1100 - total flux cleaned = -6.29715e-05 Jy ! Component: 1150 - total flux cleaned = -3.08004e-05 Jy ! Component: 1200 - total flux cleaned = 5.38335e-05 Jy ! Component: 1250 - total flux cleaned = 8.51865e-05 Jy ! Component: 1300 - total flux cleaned = 0.00013726 Jy ! Component: 1350 - total flux cleaned = 0.000209392 Jy ! Component: 1400 - total flux cleaned = 0.000239954 Jy ! Component: 1450 - total flux cleaned = 0.000290605 Jy ! Component: 1500 - total flux cleaned = 0.000360941 Jy ! Component: 1550 - total flux cleaned = 0.000400768 Jy ! Component: 1600 - total flux cleaned = 0.000430594 Jy ! Component: 1650 - total flux cleaned = 0.000508959 Jy ! Component: 1700 - total flux cleaned = 0.000508972 Jy ! Component: 1750 - total flux cleaned = 0.000566996 Jy ! Component: 1800 - total flux cleaned = 0.000634117 Jy ! Component: 1850 - total flux cleaned = 0.000643574 Jy ! Component: 1900 - total flux cleaned = 0.000728753 Jy ! Component: 1950 - total flux cleaned = 0.000756824 Jy ! Component: 2000 - total flux cleaned = 0.000766188 Jy ! Component: 2050 - total flux cleaned = 0.000794053 Jy ! Component: 2100 - total flux cleaned = 0.000867742 Jy ! Component: 2150 - total flux cleaned = 0.000913472 Jy ! Component: 2200 - total flux cleaned = 0.000931599 Jy ! Component: 2250 - total flux cleaned = 0.000976781 Jy ! Component: 2300 - total flux cleaned = 0.00104852 Jy ! Component: 2350 - total flux cleaned = 0.00107529 Jy ! Component: 2400 - total flux cleaned = 0.00112835 Jy ! Component: 2450 - total flux cleaned = 0.00116356 Jy ! Component: 2500 - total flux cleaned = 0.00118106 Jy ! Component: 2550 - total flux cleaned = 0.00120715 Jy ! Component: 2600 - total flux cleaned = 0.00125902 Jy ! Component: 2650 - total flux cleaned = 0.001345 Jy ! Component: 2700 - total flux cleaned = 0.00137922 Jy ! Component: 2750 - total flux cleaned = 0.0014131 Jy ! Component: 2800 - total flux cleaned = 0.00147231 Jy ! Component: 2850 - total flux cleaned = 0.00150591 Jy ! Component: 2900 - total flux cleaned = 0.00155611 Jy ! Component: 2950 - total flux cleaned = 0.00158946 Jy ! Component: 3000 - total flux cleaned = 0.00163906 Jy ! Component: 3050 - total flux cleaned = 0.00169677 Jy ! Component: 3100 - total flux cleaned = 0.0017214 Jy ! Component: 3150 - total flux cleaned = 0.0017704 Jy ! Component: 3200 - total flux cleaned = 0.00181914 Jy ! Component: 3250 - total flux cleaned = 0.00184327 Jy ! Component: 3300 - total flux cleaned = 0.00185935 Jy ! Component: 3350 - total flux cleaned = 0.00188341 Jy ! Component: 3400 - total flux cleaned = 0.0019073 Jy ! Component: 3450 - total flux cleaned = 0.00195493 Jy ! Component: 3500 - total flux cleaned = 0.0019786 Jy ! Component: 3550 - total flux cleaned = 0.00199433 Jy ! Component: 3600 - total flux cleaned = 0.00203349 Jy ! Component: 3650 - total flux cleaned = 0.00206465 Jy ! Component: 3700 - total flux cleaned = 0.00208016 Jy ! Component: 3750 - total flux cleaned = 0.00214968 Jy ! Component: 3800 - total flux cleaned = 0.0021266 Jy ! Component: 3850 - total flux cleaned = 0.00217256 Jy ! Component: 3900 - total flux cleaned = 0.00217256 Jy ! Component: 3950 - total flux cleaned = 0.0021574 Jy ! Component: 4000 - total flux cleaned = 0.00220272 Jy ! Component: 4050 - total flux cleaned = 0.00220264 Jy ! Total flux subtracted in 4096 components = 0.00223267 Jy ! Clean residual min=-0.000447 max=0.000414 Jy/beam ! Clean residual mean=0.000000 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.210413 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 420 components and 0.210413 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1349-3056_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8657 x 2.433 at -9.399 degrees (North through East) ! Clean map min=-0.00071665 max=0.14605 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1349-3056_X_map.fits wmodel /vlbi/bp222/temp_maps//J1349-3056_X_map.mod ! Writing 420 model components to file: /vlbi/bp222/temp_maps//J1349-3056_X_map.mod wobs /vlbi/bp222/temp_maps//J1349-3056_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1349-3056_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1349-3056_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/temp_maps//J1349-3056_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.146046 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000132643 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.272469 0.272469 0.544938 1.08988 2.17975 4.35951 8.71902 17.438 34.8761 69.7521 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.146 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1101.04 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1349-3056_X_dfm.log closed on Thu Feb 14 22:54:56 2019