! Started logfile: /vlbi/bp222/temp_maps//J1344+6606_X_dfm.log on Thu Feb 14 22:54:35 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1344+6606_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1344+6606_X_uvm.fits ! AN table 1: 31 integrations on 45 of 45 possible baselines. ! AN table 2: 30 integrations on 21 of 21 possible baselines. ! AN table 3: 48 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.907391 visibilities/baseline/integration-bin. ! Found source: J1344+6606 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 36684 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1344+6606_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 31 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 31 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 31 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 31 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 31 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 31 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 31 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 31 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 31 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 31 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 31 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 31 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.067645Jy sigma=16.416663 ! Fit after self-cal, rms=0.674098Jy sigma=10.052507 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6327 mas, bmaj=1.435 mas, bpa=8.768 degrees ! Estimated noise=0.556895 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.237546 Jy ! Component: 100 - total flux cleaned = 0.324718 Jy ! Total flux subtracted in 100 components = 0.324718 Jy ! Clean residual min=-0.010407 max=0.041182 Jy/beam ! Clean residual mean=0.000005 rms=0.002703 Jy/beam ! Combined flux in latest and established models = 0.324718 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.324718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099262Jy sigma=1.532557 ! Fit after self-cal, rms=0.099156Jy sigma=1.530080 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463919 Jy ! Component: 100 - total flux cleaned = 0.0712162 Jy ! Total flux subtracted in 100 components = 0.0712162 Jy ! Clean residual min=-0.005658 max=0.014224 Jy/beam ! Clean residual mean=0.000002 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 0.395934 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 8 components and 0.395934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069623Jy sigma=1.020188 ! Fit after self-cal, rms=0.069620Jy sigma=1.019711 ! Inverting map ! Added new window around map position (-0.6, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151165 Jy ! Component: 100 - total flux cleaned = 0.0234969 Jy ! Total flux subtracted in 100 components = 0.0234969 Jy ! Clean residual min=-0.004563 max=0.006585 Jy/beam ! Clean residual mean=0.000002 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.419431 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 11 components and 0.419431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065686Jy sigma=0.956796 ! Fit after self-cal, rms=0.065649Jy sigma=0.955457 ! Inverting map ! Added new window around map position (-1.8, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00689721 Jy ! Component: 100 - total flux cleaned = 0.0105594 Jy ! Total flux subtracted in 100 components = 0.0105594 Jy ! Clean residual min=-0.004295 max=0.005238 Jy/beam ! Clean residual mean=0.000001 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.429991 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.429991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064991Jy sigma=0.944762 ! Fit after self-cal, rms=0.064961Jy sigma=0.943865 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8482 mas, bmaj=1.679 mas, bpa=3.294 degrees ! Estimated noise=0.256119 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391983 Jy ! Component: 100 - total flux cleaned = 0.00648677 Jy ! Component: 150 - total flux cleaned = 0.00742345 Jy ! Component: 200 - total flux cleaned = 0.00775167 Jy ! Total flux subtracted in 200 components = 0.00775167 Jy ! Clean residual min=-0.004279 max=0.004941 Jy/beam ! Clean residual mean=0.000002 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.437742 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.437742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064683Jy sigma=0.938887 ! Fit after self-cal, rms=0.064681Jy sigma=0.938780 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8482 x 1.679 at 3.294 degrees (North through East) ! Clean map min=-0.0039935 max=0.33774 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.92 KP 1.09 ! LA 1.02 MK 1.08 NL 1.22 OV 0.95 ! PT 0.96 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 0.97 KP 1.00 ! MK 0.96 NL 0.85 OV 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.98 HN 0.99 KP 0.99 ! MK 1.00 NL 0.99 OV 0.97 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.93 KP 1.09 ! LA 1.02 MK 1.09 NL 1.20 OV 0.94 ! PT 0.96 SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 0.99 KP 1.00 ! MK 0.98 NL 0.83 OV 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.98 HN 0.99 KP 0.98 ! MK 1.00 NL 0.99 OV 0.98 SC 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.92 KP 1.09 ! LA 1.03 MK 1.09 NL 1.22 OV 0.95 ! PT 0.96 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 0.97 KP 0.99 ! MK 0.94 NL 0.86 OV 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.98 HN 0.99 KP 1.00 ! MK 1.00 NL 0.99 OV 0.97 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.93 KP 1.09 ! LA 1.02 MK 1.06 NL 1.23 OV 0.94 ! PT 0.96 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 HN 0.97 KP 1.00 ! MK 0.96 NL 0.86 OV 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.98 HN 0.98 KP 1.00 ! MK 1.01 NL 0.99 OV 0.98 SC 0.97 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.93 KP 1.09 ! LA 1.03 MK 1.08 NL 1.22 OV 0.93 ! PT 0.94 SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 0.99 KP 1.00 ! MK 0.96 NL 0.86 OV 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.99 HN 0.99 KP 0.98 ! MK 1.02 NL 1.00 OV 0.98 SC 0.96 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.94 KP 1.09 ! LA 1.02 MK 1.08 NL 1.26 OV 0.94 ! PT 0.96 SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.98 HN 1.01 KP 1.00 ! MK 0.97 NL 0.87 OV 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.99 HN 0.98 KP 0.99 ! MK 1.01 NL 1.00 OV 0.98 SC 0.96 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.91 KP 1.10 ! LA 1.03 MK 1.10 NL 1.22 OV 0.95 ! PT 0.95 SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 1.00 KP 1.01 ! MK 0.96 NL 0.86 OV 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.99 HN 0.99 KP 0.99 ! MK 1.01 NL 1.00 OV 0.98 SC 0.98 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 0.92 KP 1.09 ! LA 1.01 MK 1.10 NL 1.25 OV 0.94 ! PT 0.97 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 0.99 KP 1.01 ! MK 0.95 NL 0.84 OV 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.98 HN 1.00 KP 0.99 ! MK 1.02 NL 1.00 OV 0.97 SC 0.99 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.92 KP 1.08 ! LA 1.02 MK 1.07 NL 1.22 OV 0.95 ! PT 0.96 SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 HN 0.99 KP 1.01 ! MK 0.97 NL 0.85 OV 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00 HN 0.99 KP 0.99 ! MK 1.01 NL 1.00 OV 0.97 SC 0.97 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 0.94 KP 1.10 ! LA 1.03 MK 1.13 NL 1.23 OV 0.92 ! PT 0.97 SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 1.02 KP 1.02 ! MK 0.97 NL 0.85 OV 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.98 HN 0.99 KP 0.99 ! MK 1.01 NL 0.99 OV 0.97 SC 0.98 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.94 KP 1.09 ! LA 1.02 MK 1.11 NL 1.24 OV 0.95 ! PT 0.96 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 HN 1.01 KP 0.99 ! MK 0.95 NL 0.85 OV 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.98 HN 0.99 KP 0.99 ! MK 0.97 NL 0.99 OV 0.98 SC 0.99 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.93 KP 1.10 ! LA 1.04 MK 1.07 NL 1.24 OV 0.95 ! PT 0.95 SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.98 HN 1.03 KP 1.02 ! MK 0.93 NL 0.86 OV 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 HN 1.00 KP 0.99 ! MK 0.93 NL 0.99 OV 0.99 SC 0.99 ! ! ! Fit before self-cal, rms=0.064681Jy sigma=0.938780 ! Fit after self-cal, rms=0.056941Jy sigma=0.783556 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8483 mas, bmaj=1.671 mas, bpa=3.566 degrees ! Estimated noise=0.25598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372749 Jy ! Component: 100 - total flux cleaned = 0.00490149 Jy ! Component: 150 - total flux cleaned = 0.0053031 Jy ! Component: 200 - total flux cleaned = 0.00555431 Jy ! Total flux subtracted in 200 components = 0.00555431 Jy ! Clean residual min=-0.001944 max=0.002261 Jy/beam ! Clean residual mean=-0.000000 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.443296 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.443296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056492Jy sigma=0.776357 ! Fit after self-cal, rms=0.056436Jy sigma=0.775346 ! Inverting map ! Added new window around map position (1.2, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105448 Jy ! Component: 100 - total flux cleaned = 0.00112084 Jy ! Component: 150 - total flux cleaned = 0.00111977 Jy ! Component: 200 - total flux cleaned = 0.00106704 Jy ! Total flux subtracted in 200 components = 0.00106704 Jy ! Clean residual min=-0.001604 max=0.001894 Jy/beam ! Clean residual mean=-0.000000 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.444364 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 55 components and 0.444364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056286Jy sigma=0.773159 ! Fit after self-cal, rms=0.056273Jy sigma=0.773012 ! Inverting map ! Added new window around map position (-5.4, -20.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148136 Jy ! Component: 100 - total flux cleaned = 0.0013807 Jy ! Component: 150 - total flux cleaned = 0.00114744 Jy ! Component: 200 - total flux cleaned = 0.000938334 Jy ! Total flux subtracted in 200 components = 0.000938334 Jy ! Clean residual min=-0.001510 max=0.001670 Jy/beam ! Clean residual mean=-0.000000 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.445302 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 71 components and 0.445302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056175Jy sigma=0.771494 ! Fit after self-cal, rms=0.056168Jy sigma=0.771410 ! Inverting map ! Added new window around map position (-0.4, 12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118335 Jy ! Component: 100 - total flux cleaned = 0.00130738 Jy ! Component: 150 - total flux cleaned = 0.00134416 Jy ! Component: 200 - total flux cleaned = 0.00130936 Jy ! Total flux subtracted in 200 components = 0.00130936 Jy ! Clean residual min=-0.001376 max=0.001377 Jy/beam ! Clean residual mean=-0.000000 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.446611 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 88 components and 0.446611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056098Jy sigma=0.770548 ! Fit after self-cal, rms=0.056094Jy sigma=0.770512 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056094Jy sigma=0.770512 ! Fit after self-cal, rms=0.055601Jy sigma=0.766954 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8452 mas, bmaj=1.669 mas, bpa=3.596 degrees ! Estimated noise=0.255484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000959809 Jy ! Component: 100 - total flux cleaned = 0.00115226 Jy ! Component: 150 - total flux cleaned = 0.00115354 Jy ! Component: 200 - total flux cleaned = 0.00103947 Jy ! Total flux subtracted in 200 components = 0.00103947 Jy ! Clean residual min=-0.001174 max=0.001190 Jy/beam ! Clean residual mean=-0.000000 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.447651 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 105 components and 0.447651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055538Jy sigma=0.766077 ! Fit after self-cal, rms=0.055531Jy sigma=0.766002 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25.6, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000925051 Jy ! Component: 100 - total flux cleaned = 0.00121995 Jy ! Component: 150 - total flux cleaned = 0.00124639 Jy ! Component: 200 - total flux cleaned = 0.00122157 Jy ! Total flux subtracted in 200 components = 0.00122157 Jy ! Clean residual min=-0.001118 max=0.001043 Jy/beam ! Clean residual mean=-0.000000 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.448872 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 123 components and 0.448872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055498Jy sigma=0.765483 ! Fit after self-cal, rms=0.055498Jy sigma=0.765456 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055498Jy sigma=0.765456 ! Fit after self-cal, rms=0.055279Jy sigma=0.762907 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8436 mas, bmaj=1.669 mas, bpa=3.588 degrees ! Estimated noise=0.255335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000498794 Jy ! Component: 100 - total flux cleaned = 0.000787046 Jy ! Component: 150 - total flux cleaned = 0.000948841 Jy ! Component: 200 - total flux cleaned = 0.00109571 Jy ! Total flux subtracted in 200 components = 0.00109571 Jy ! Clean residual min=-0.000881 max=0.000887 Jy/beam ! Clean residual mean=-0.000000 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.449968 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 131 components and 0.449968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055252Jy sigma=0.762553 ! Fit after self-cal, rms=0.055250Jy sigma=0.762533 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148391 Jy ! Component: 100 - total flux cleaned = 0.00024495 Jy ! Component: 150 - total flux cleaned = 0.000263605 Jy ! Component: 200 - total flux cleaned = 0.000315219 Jy ! Total flux subtracted in 200 components = 0.000315219 Jy ! Clean residual min=-0.000868 max=0.000853 Jy/beam ! Clean residual mean=-0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.450283 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 143 components and 0.450283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055237Jy sigma=0.762373 ! Fit after self-cal, rms=0.055236Jy sigma=0.762370 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055236Jy sigma=0.762370 ! Fit after self-cal, rms=0.055160Jy sigma=0.762308 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.93 mas, bmaj=2.419 mas, bpa=-0.4047 degrees ! Estimated noise=0.323947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000625397 Jy ! Component: 100 - total flux cleaned = 0.000953826 Jy ! Component: 150 - total flux cleaned = 0.00105371 Jy ! Component: 200 - total flux cleaned = 0.00111351 Jy ! Total flux subtracted in 200 components = 0.00111351 Jy ! Clean residual min=-0.000844 max=0.000841 Jy/beam ! Clean residual mean=-0.000001 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.451397 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 160 components and 0.451397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055151Jy sigma=0.762191 ! Fit after self-cal, rms=0.055150Jy sigma=0.762184 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176561 Jy ! Component: 100 - total flux cleaned = 0.000283469 Jy ! Component: 150 - total flux cleaned = 0.000296105 Jy ! Component: 200 - total flux cleaned = 0.000319761 Jy ! Total flux subtracted in 200 components = 0.000319761 Jy ! Clean residual min=-0.000840 max=0.000820 Jy/beam ! Clean residual mean=-0.000001 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.451716 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 175 components and 0.451716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055147Jy sigma=0.762139 ! Fit after self-cal, rms=0.055147Jy sigma=0.762137 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8428 mas, bmaj=1.668 mas, bpa=3.595 degrees ! Estimated noise=0.255228 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8428 x 1.668 at 3.595 degrees (North through East) ! Clean map min=-0.0010522 max=0.33724 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6298 mas, bmaj=1.429 mas, bpa=9.101 degrees ! Estimated noise=0.548981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.234233 Jy ! Component: 100 - total flux cleaned = 0.321385 Jy ! Component: 150 - total flux cleaned = 0.367724 Jy ! Component: 200 - total flux cleaned = 0.393602 Jy ! Total flux subtracted in 200 components = 0.393602 Jy ! Clean residual min=-0.003986 max=0.012792 Jy/beam ! Clean residual mean=0.000002 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.393602 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.393602 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8428 mas, bmaj=1.668 mas, bpa=3.595 degrees ! Estimated noise=0.255228 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209785 Jy ! Component: 100 - total flux cleaned = 0.0318139 Jy ! Component: 150 - total flux cleaned = 0.0382645 Jy ! Component: 200 - total flux cleaned = 0.0425918 Jy ! Total flux subtracted in 200 components = 0.0425918 Jy ! Clean residual min=-0.001684 max=0.002384 Jy/beam ! Clean residual mean=-0.000000 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.436194 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 25 components and 0.436194 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030605 Jy ! Component: 100 - total flux cleaned = 0.00545378 Jy ! Component: 150 - total flux cleaned = 0.00742827 Jy ! Component: 200 - total flux cleaned = 0.008664 Jy ! Total flux subtracted in 200 components = 0.008664 Jy ! Clean residual min=-0.001202 max=0.001372 Jy/beam ! Clean residual mean=-0.000000 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.444858 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 56 components and 0.444858 Jy ! Inverting map ! Added new window around map position (7.4, 27.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104196 Jy ! Component: 100 - total flux cleaned = 0.00188757 Jy ! Component: 150 - total flux cleaned = 0.00255453 Jy ! Component: 200 - total flux cleaned = 0.00311878 Jy ! Total flux subtracted in 200 components = 0.00311878 Jy ! Clean residual min=-0.001037 max=0.001044 Jy/beam ! Clean residual mean=-0.000000 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.447977 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 72 components and 0.447977 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.93 mas, bmaj=2.419 mas, bpa=-0.4047 degrees ! Estimated noise=0.323947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170184 Jy ! Component: 100 - total flux cleaned = 0.00222932 Jy ! Component: 150 - total flux cleaned = 0.00252533 Jy ! Component: 200 - total flux cleaned = 0.00270489 Jy ! Total flux subtracted in 200 components = 0.00270489 Jy ! Clean residual min=-0.001074 max=0.001089 Jy/beam ! Clean residual mean=-0.000001 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.450682 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000279186 Jy ! Component: 100 - total flux cleaned = 0.000420379 Jy ! Component: 150 - total flux cleaned = 0.000598841 Jy ! Component: 200 - total flux cleaned = 0.000715111 Jy ! Total flux subtracted in 200 components = 0.000715111 Jy ! Clean residual min=-0.000984 max=0.000924 Jy/beam ! Clean residual mean=-0.000001 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.451397 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 151 components and 0.451397 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8428 mas, bmaj=1.668 mas, bpa=3.595 degrees ! Estimated noise=0.255228 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151457 Jy ! Component: 100 - total flux cleaned = 0.000119434 Jy ! Component: 150 - total flux cleaned = 0.000118577 Jy ! Component: 200 - total flux cleaned = 0.000142176 Jy ! Total flux subtracted in 200 components = 0.000142176 Jy ! Clean residual min=-0.000875 max=0.000913 Jy/beam ! Clean residual mean=-0.000000 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.451539 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 173 components and 0.451539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055194Jy sigma=0.762561 ! Fit after self-cal, rms=0.055193Jy sigma=0.762483 wmodel J1344+6606_X_map.mod ! Writing 173 model components to file: J1344+6606_X_map.mod wobs J1344+6606_X_uvs.fits ! Writing UV FITS file: J1344+6606_X_uvs.fits wwins J1344+6606_X_map.win ! wwins: Wrote 9 windows to J1344+6606_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.45911e-05 Jy ! Component: 100 - total flux cleaned = 9.99291e-05 Jy ! Component: 150 - total flux cleaned = 0.00013006 Jy ! Component: 200 - total flux cleaned = 0.000159303 Jy ! Component: 250 - total flux cleaned = 0.000202116 Jy ! Component: 300 - total flux cleaned = 0.000244077 Jy ! Component: 350 - total flux cleaned = 0.000271645 Jy ! Component: 400 - total flux cleaned = 0.00037963 Jy ! Component: 450 - total flux cleaned = 0.000432479 Jy ! Component: 500 - total flux cleaned = 0.000511019 Jy ! Component: 550 - total flux cleaned = 0.000588402 Jy ! Component: 600 - total flux cleaned = 0.000664935 Jy ! Component: 650 - total flux cleaned = 0.000740621 Jy ! Component: 700 - total flux cleaned = 0.000852907 Jy ! Component: 750 - total flux cleaned = 0.00092697 Jy ! Component: 800 - total flux cleaned = 0.00098795 Jy ! Component: 850 - total flux cleaned = 0.00103654 Jy ! Component: 900 - total flux cleaned = 0.00112037 Jy ! Component: 950 - total flux cleaned = 0.00116766 Jy ! Component: 1000 - total flux cleaned = 0.00122626 Jy ! Component: 1050 - total flux cleaned = 0.00122644 Jy ! Component: 1100 - total flux cleaned = 0.00134174 Jy ! Component: 1150 - total flux cleaned = 0.00137581 Jy ! Component: 1200 - total flux cleaned = 0.00143218 Jy ! Component: 1250 - total flux cleaned = 0.00142098 Jy ! Component: 1300 - total flux cleaned = 0.00146551 Jy ! Component: 1350 - total flux cleaned = 0.00148755 Jy ! Component: 1400 - total flux cleaned = 0.00155336 Jy ! Component: 1450 - total flux cleaned = 0.00148808 Jy ! Component: 1500 - total flux cleaned = 0.00152055 Jy ! Component: 1550 - total flux cleaned = 0.0015418 Jy ! Component: 1600 - total flux cleaned = 0.00150993 Jy ! Component: 1650 - total flux cleaned = 0.00147845 Jy ! Component: 1700 - total flux cleaned = 0.00153081 Jy ! Component: 1750 - total flux cleaned = 0.00148913 Jy ! Component: 1800 - total flux cleaned = 0.00147881 Jy ! Component: 1850 - total flux cleaned = 0.00146856 Jy ! Component: 1900 - total flux cleaned = 0.00147869 Jy ! Component: 1950 - total flux cleaned = 0.00145848 Jy ! Component: 2000 - total flux cleaned = 0.00145863 Jy ! Component: 2050 - total flux cleaned = 0.00145867 Jy ! Component: 2100 - total flux cleaned = 0.00147854 Jy ! Component: 2150 - total flux cleaned = 0.00148848 Jy ! Component: 2200 - total flux cleaned = 0.00149821 Jy ! Component: 2250 - total flux cleaned = 0.00146903 Jy ! Component: 2300 - total flux cleaned = 0.00146911 Jy ! Component: 2350 - total flux cleaned = 0.00153642 Jy ! Component: 2400 - total flux cleaned = 0.00151727 Jy ! Component: 2450 - total flux cleaned = 0.0015172 Jy ! Component: 2500 - total flux cleaned = 0.00151719 Jy ! Component: 2550 - total flux cleaned = 0.00149836 Jy ! Component: 2600 - total flux cleaned = 0.00149831 Jy ! Component: 2650 - total flux cleaned = 0.00151694 Jy ! Component: 2700 - total flux cleaned = 0.0015355 Jy ! Component: 2750 - total flux cleaned = 0.00155396 Jy ! Component: 2800 - total flux cleaned = 0.00158147 Jy ! Component: 2850 - total flux cleaned = 0.0015814 Jy ! Component: 2900 - total flux cleaned = 0.00156325 Jy ! Component: 2950 - total flux cleaned = 0.00161734 Jy ! Component: 3000 - total flux cleaned = 0.00155444 Jy ! Component: 3050 - total flux cleaned = 0.0015634 Jy ! Component: 3100 - total flux cleaned = 0.00159012 Jy ! Component: 3150 - total flux cleaned = 0.00157234 Jy ! Component: 3200 - total flux cleaned = 0.00154581 Jy ! Component: 3250 - total flux cleaned = 0.00156344 Jy ! Component: 3300 - total flux cleaned = 0.00158086 Jy ! Component: 3350 - total flux cleaned = 0.00158083 Jy ! Component: 3400 - total flux cleaned = 0.00156345 Jy ! Component: 3450 - total flux cleaned = 0.00157205 Jy ! Component: 3500 - total flux cleaned = 0.00152062 Jy ! Component: 3550 - total flux cleaned = 0.0015377 Jy ! Component: 3600 - total flux cleaned = 0.00155465 Jy ! Component: 3650 - total flux cleaned = 0.00149546 Jy ! Component: 3700 - total flux cleaned = 0.00156291 Jy ! Component: 3750 - total flux cleaned = 0.00157129 Jy ! Component: 3800 - total flux cleaned = 0.00157131 Jy ! Component: 3850 - total flux cleaned = 0.00157132 Jy ! Component: 3900 - total flux cleaned = 0.00157961 Jy ! Component: 3950 - total flux cleaned = 0.00157969 Jy ! Component: 4000 - total flux cleaned = 0.00159614 Jy ! Component: 4050 - total flux cleaned = 0.00164514 Jy ! Total flux subtracted in 4096 components = 0.00161257 Jy ! Clean residual min=-0.000552 max=0.000491 Jy/beam ! Clean residual mean=-0.000000 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.453152 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 474 components and 0.453152 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1344+6606_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8428 x 1.668 at 3.595 degrees (North through East) ! Clean map min=-0.0010199 max=0.33703 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1344+6606_X_map.fits wmodel /vlbi/bp222/temp_maps//J1344+6606_X_map.mod ! Writing 474 model components to file: /vlbi/bp222/temp_maps//J1344+6606_X_map.mod wobs /vlbi/bp222/temp_maps//J1344+6606_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1344+6606_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1344+6606_X_map.win ! wwins: Wrote 10 windows to /vlbi/bp222/temp_maps//J1344+6606_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.337029 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000139073 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.123793 0.123793 0.247586 0.495173 0.990346 1.98069 3.96138 7.92276 15.8455 31.6911 63.3821 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.337 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2423.4 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1344+6606_X_dfm.log closed on Thu Feb 14 22:54:42 2019