! Started logfile: /vlbi/bp222/temp_maps//J1317+3925_X_dfm.log on Thu Feb 14 22:53:11 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1317+3925_X_uva.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1317+3925_X_uva.fits ! AN table 1: 120 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.932593 visibilities/baseline/integration-bin. ! Found source: J1317+3925 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 60432 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1317+3925_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003537Jy sigma=18.218124 ! Fit after self-cal, rms=0.952673Jy sigma=17.199180 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6433 mas, bmaj=1.531 mas, bpa=0.8431 degrees ! Estimated noise=0.340342 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0313439 Jy ! Component: 100 - total flux cleaned = 0.0445532 Jy ! Total flux subtracted in 100 components = 0.0445532 Jy ! Clean residual min=-0.003894 max=0.012515 Jy/beam ! Clean residual mean=0.000003 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.0445532 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0445532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062244Jy sigma=1.116340 ! Fit after self-cal, rms=0.061082Jy sigma=1.096616 ! Inverting map ! Added new window around map position (-1, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115858 Jy ! Component: 100 - total flux cleaned = 0.0192392 Jy ! Total flux subtracted in 100 components = 0.0192392 Jy ! Clean residual min=-0.003458 max=0.012088 Jy/beam ! Clean residual mean=0.000002 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0637924 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.0637924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057023Jy sigma=1.004439 ! Fit after self-cal, rms=0.056658Jy sigma=0.997973 ! Inverting map ! Added new window around map position (1.4, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00979619 Jy ! Component: 100 - total flux cleaned = 0.016327 Jy ! Total flux subtracted in 100 components = 0.016327 Jy ! Clean residual min=-0.002666 max=0.006773 Jy/beam ! Clean residual mean=0.000002 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.0801194 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 20 components and 0.0801194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053834Jy sigma=0.936514 ! Fit after self-cal, rms=0.053667Jy sigma=0.933899 ! Inverting map ! Added new window around map position (-1.8, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0066909 Jy ! Component: 100 - total flux cleaned = 0.0115901 Jy ! Total flux subtracted in 100 components = 0.0115901 Jy ! Clean residual min=-0.002176 max=0.004086 Jy/beam ! Clean residual mean=0.000002 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0917095 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.0917095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052248Jy sigma=0.902846 ! Fit after self-cal, rms=0.052179Jy sigma=0.901905 ! Inverting map ! Added new window around map position (-2.6, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488684 Jy ! Component: 100 - total flux cleaned = 0.00855356 Jy ! Total flux subtracted in 100 components = 0.00855356 Jy ! Clean residual min=-0.001955 max=0.002583 Jy/beam ! Clean residual mean=0.000002 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.100263 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.100263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051420Jy sigma=0.885568 ! Fit after self-cal, rms=0.051361Jy sigma=0.884920 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354017 Jy ! Component: 100 - total flux cleaned = 0.0062855 Jy ! Total flux subtracted in 100 components = 0.0062855 Jy ! Clean residual min=-0.001854 max=0.002177 Jy/beam ! Clean residual mean=0.000001 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.106549 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.106549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050952Jy sigma=0.876205 ! Fit after self-cal, rms=0.050915Jy sigma=0.875860 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8383 mas, bmaj=1.845 mas, bpa=1.431 degrees ! Estimated noise=0.162302 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413117 Jy ! Component: 100 - total flux cleaned = 0.00701166 Jy ! Component: 150 - total flux cleaned = 0.00914419 Jy ! Component: 200 - total flux cleaned = 0.0107581 Jy ! Total flux subtracted in 200 components = 0.0107581 Jy ! Clean residual min=-0.001627 max=0.002941 Jy/beam ! Clean residual mean=0.000001 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.117307 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 47 components and 0.117307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050502Jy sigma=0.867507 ! Fit after self-cal, rms=0.050433Jy sigma=0.866727 ! Inverting map ! Added new window around map position (-5, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305285 Jy ! Component: 100 - total flux cleaned = 0.00506 Jy ! Component: 150 - total flux cleaned = 0.00664642 Jy ! Component: 200 - total flux cleaned = 0.00759483 Jy ! Total flux subtracted in 200 components = 0.00759483 Jy ! Clean residual min=-0.001386 max=0.001462 Jy/beam ! Clean residual mean=0.000001 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.124902 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 76 components and 0.124902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050210Jy sigma=0.862061 ! Fit after self-cal, rms=0.050161Jy sigma=0.861442 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8383 x 1.845 at 1.431 degrees (North through East) ! Clean map min=-0.001283 max=0.046329 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.93 KP 1.02 ! LA 0.96 MK 1.01 NL 0.98 OV 0.98 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.02 KP 1.00 ! LA 0.97 MK 0.99 NL 0.99 OV 0.98 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.01 KP 1.01 ! LA 0.96 MK 0.99 NL 1.00 OV 0.97 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.03 KP 1.00 ! LA 0.96 MK 0.94 NL 1.02 OV 1.00 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 0.98 KP 1.04 ! LA 0.97 MK 0.94 NL 1.02 OV 0.99 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.02 KP 1.01 ! LA 0.99 MK 1.01 NL 1.00 OV 0.99 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.03 KP 1.00 ! LA 0.96 MK 1.01 NL 1.00 OV 0.99 ! PT 1.00 SC 0.91 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.97 KP 1.02 ! LA 0.98 MK 0.99 NL 0.98 OV 0.97 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.01 KP 1.04 ! LA 0.97 MK 0.98 NL 0.98 OV 1.01 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 0.99 KP 1.02 ! LA 0.98 MK 0.99 NL 1.02 OV 1.02 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 1.00 KP 0.99 ! LA 0.98 MK 0.98 NL 0.98 OV 1.00 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 0.97 KP 1.02 ! LA 0.97 MK 0.87 NL 1.00 OV 0.98 ! PT 1.01 SC 0.92 ! ! ! Fit before self-cal, rms=0.050161Jy sigma=0.861442 ! Fit after self-cal, rms=0.048703Jy sigma=0.860405 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.833 mas, bmaj=1.839 mas, bpa=1.632 degrees ! Estimated noise=0.158642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493006 Jy ! Component: 100 - total flux cleaned = 0.000967965 Jy ! Component: 150 - total flux cleaned = 0.0012988 Jy ! Component: 200 - total flux cleaned = 0.00155399 Jy ! Total flux subtracted in 200 components = 0.00155399 Jy ! Clean residual min=-0.001301 max=0.001298 Jy/beam ! Clean residual mean=0.000001 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.126456 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 0.126455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048628Jy sigma=0.858944 ! Fit after self-cal, rms=0.048609Jy sigma=0.858715 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048609Jy sigma=0.858715 ! Fit after self-cal, rms=0.048761Jy sigma=0.857338 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8291 mas, bmaj=1.842 mas, bpa=1.204 degrees ! Estimated noise=0.158241 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159353 Jy ! Component: 100 - total flux cleaned = 0.000510879 Jy ! Component: 150 - total flux cleaned = 0.000779148 Jy ! Component: 200 - total flux cleaned = 0.000898329 Jy ! Total flux subtracted in 200 components = 0.000898329 Jy ! Clean residual min=-0.001275 max=0.001266 Jy/beam ! Clean residual mean=0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.127354 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 93 components and 0.127354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048706Jy sigma=0.856449 ! Fit after self-cal, rms=0.048688Jy sigma=0.856171 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110269 Jy ! Component: 100 - total flux cleaned = 0.000343329 Jy ! Component: 150 - total flux cleaned = 0.000460521 Jy ! Component: 200 - total flux cleaned = 0.000565426 Jy ! Total flux subtracted in 200 components = 0.000565426 Jy ! Clean residual min=-0.001395 max=0.001284 Jy/beam ! Clean residual mean=0.000000 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.127919 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 98 components and 0.127919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048644Jy sigma=0.855534 ! Fit after self-cal, rms=0.048617Jy sigma=0.855291 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048617Jy sigma=0.855291 ! Fit after self-cal, rms=0.048507Jy sigma=0.853779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8191 mas, bmaj=1.846 mas, bpa=0.6461 degrees ! Estimated noise=0.155894 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211101 Jy ! Component: 100 - total flux cleaned = 0.000306813 Jy ! Component: 150 - total flux cleaned = 0.000475461 Jy ! Component: 200 - total flux cleaned = 0.000600113 Jy ! Total flux subtracted in 200 components = 0.000600113 Jy ! Clean residual min=-0.001396 max=0.001181 Jy/beam ! Clean residual mean=0.000000 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.128519 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 0.128519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048457Jy sigma=0.853158 ! Fit after self-cal, rms=0.048457Jy sigma=0.852857 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109049 Jy ! Component: 100 - total flux cleaned = 0.000140021 Jy ! Component: 150 - total flux cleaned = 0.000241334 Jy ! Component: 200 - total flux cleaned = 0.000307162 Jy ! Total flux subtracted in 200 components = 0.000307162 Jy ! Clean residual min=-0.001449 max=0.001189 Jy/beam ! Clean residual mean=0.000000 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.128827 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 113 components and 0.128827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048416Jy sigma=0.852373 ! Fit after self-cal, rms=0.048394Jy sigma=0.852160 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048394Jy sigma=0.852160 ! Fit after self-cal, rms=0.047687Jy sigma=0.851981 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.027 mas, bmaj=2.702 mas, bpa=1.163 degrees ! Estimated noise=0.206345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201503 Jy ! Component: 100 - total flux cleaned = 0.000311439 Jy ! Component: 150 - total flux cleaned = 0.00035519 Jy ! Component: 200 - total flux cleaned = 0.000336676 Jy ! Total flux subtracted in 200 components = 0.000336676 Jy ! Clean residual min=-0.001149 max=0.001071 Jy/beam ! Clean residual mean=0.000001 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.129163 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 127 components and 0.129163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.047672Jy sigma=0.851722 ! Fit after self-cal, rms=0.047667Jy sigma=0.851619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.27002e-05 Jy ! Component: 100 - total flux cleaned = 0.000159439 Jy ! Component: 150 - total flux cleaned = 0.000144206 Jy ! Component: 200 - total flux cleaned = 0.000130961 Jy ! Total flux subtracted in 200 components = 0.000130961 Jy ! Clean residual min=-0.001088 max=0.001038 Jy/beam ! Clean residual mean=0.000001 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.129294 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 133 components and 0.129294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.047653Jy sigma=0.851451 ! Fit after self-cal, rms=0.047646Jy sigma=0.851389 ! Inverting map ! Added new window around map position (-3.2, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000988132 Jy ! Component: 100 - total flux cleaned = 0.00165711 Jy ! Component: 150 - total flux cleaned = 0.00202916 Jy ! Component: 200 - total flux cleaned = 0.00223369 Jy ! Total flux subtracted in 200 components = 0.00223369 Jy ! Clean residual min=-0.000893 max=0.000752 Jy/beam ! Clean residual mean=0.000001 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.131528 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 162 components and 0.131528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.047617Jy sigma=0.850969 ! Fit after self-cal, rms=0.047610Jy sigma=0.850910 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8128 mas, bmaj=1.85 mas, bpa=0.2952 degrees ! Estimated noise=0.153854 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8128 x 1.85 at 0.2952 degrees (North through East) ! Clean map min=-0.0012169 max=0.043488 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6229 mas, bmaj=1.546 mas, bpa=-0.7289 degrees ! Estimated noise=0.313723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0292308 Jy ! Component: 100 - total flux cleaned = 0.0471825 Jy ! Component: 150 - total flux cleaned = 0.0604472 Jy ! Component: 200 - total flux cleaned = 0.0705007 Jy ! Total flux subtracted in 200 components = 0.0705007 Jy ! Clean residual min=-0.002991 max=0.005928 Jy/beam ! Clean residual mean=0.000002 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0705008 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0705008 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8128 mas, bmaj=1.85 mas, bpa=0.2952 degrees ! Estimated noise=0.153854 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139485 Jy ! Component: 100 - total flux cleaned = 0.0237155 Jy ! Component: 150 - total flux cleaned = 0.0308376 Jy ! Component: 200 - total flux cleaned = 0.0362827 Jy ! Total flux subtracted in 200 components = 0.0362827 Jy ! Clean residual min=-0.001868 max=0.003387 Jy/beam ! Clean residual mean=-0.000000 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.106783 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 29 components and 0.106784 Jy ! Inverting map ! Added new window around map position (0.6, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429517 Jy ! Component: 100 - total flux cleaned = 0.00773081 Jy ! Component: 150 - total flux cleaned = 0.01052 Jy ! Component: 200 - total flux cleaned = 0.0128343 Jy ! Total flux subtracted in 200 components = 0.0128343 Jy ! Clean residual min=-0.001550 max=0.001580 Jy/beam ! Clean residual mean=0.000000 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.119618 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 54 components and 0.119618 Jy ! Inverting map ! Added new window around map position (-3.6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019646 Jy ! Component: 100 - total flux cleaned = 0.00355103 Jy ! Component: 150 - total flux cleaned = 0.00469934 Jy ! Component: 200 - total flux cleaned = 0.00572058 Jy ! Total flux subtracted in 200 components = 0.00572058 Jy ! Clean residual min=-0.001380 max=0.001091 Jy/beam ! Clean residual mean=0.000000 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.125338 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 76 components and 0.125338 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.027 mas, bmaj=2.702 mas, bpa=1.163 degrees ! Estimated noise=0.206345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186619 Jy ! Component: 100 - total flux cleaned = 0.00312004 Jy ! Component: 150 - total flux cleaned = 0.00408724 Jy ! Component: 200 - total flux cleaned = 0.00469953 Jy ! Total flux subtracted in 200 components = 0.00469953 Jy ! Clean residual min=-0.000960 max=0.000891 Jy/beam ! Clean residual mean=0.000001 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.130038 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500269 Jy ! Component: 100 - total flux cleaned = 0.000893617 Jy ! Component: 150 - total flux cleaned = 0.00115796 Jy ! Component: 200 - total flux cleaned = 0.00133986 Jy ! Total flux subtracted in 200 components = 0.00133986 Jy ! Clean residual min=-0.000895 max=0.000769 Jy/beam ! Clean residual mean=0.000001 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.131378 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 133 components and 0.131378 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8128 mas, bmaj=1.85 mas, bpa=0.2952 degrees ! Estimated noise=0.153854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.6675e-06 Jy ! Component: 100 - total flux cleaned = -4.04299e-05 Jy ! Component: 150 - total flux cleaned = 0.000124105 Jy ! Component: 200 - total flux cleaned = 0.000216636 Jy ! Total flux subtracted in 200 components = 0.000216636 Jy ! Clean residual min=-0.001298 max=0.000960 Jy/beam ! Clean residual mean=0.000001 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.131594 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 161 components and 0.131594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.047557Jy sigma=0.850582 ! Fit after self-cal, rms=0.047503Jy sigma=0.849735 wmodel J1317+3925_X_map.mod ! Writing 161 model components to file: J1317+3925_X_map.mod wobs J1317+3925_X_uvs.fits ! Writing UV FITS file: J1317+3925_X_uvs.fits wwins J1317+3925_X_map.win ! wwins: Wrote 9 windows to J1317+3925_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101209 Jy ! Component: 100 - total flux cleaned = -0.000174389 Jy ! Component: 150 - total flux cleaned = -0.000290769 Jy ! Component: 200 - total flux cleaned = -0.000449853 Jy ! Component: 250 - total flux cleaned = -0.000542465 Jy ! Component: 300 - total flux cleaned = -0.000632747 Jy ! Component: 350 - total flux cleaned = -0.000691567 Jy ! Component: 400 - total flux cleaned = -0.000734959 Jy ! Component: 450 - total flux cleaned = -0.000819928 Jy ! Component: 500 - total flux cleaned = -0.000875527 Jy ! Component: 550 - total flux cleaned = -0.000916607 Jy ! Component: 600 - total flux cleaned = -0.000957204 Jy ! Component: 650 - total flux cleaned = -0.000996984 Jy ! Component: 700 - total flux cleaned = -0.00101003 Jy ! Component: 750 - total flux cleaned = -0.00102289 Jy ! Component: 800 - total flux cleaned = -0.00103547 Jy ! Component: 850 - total flux cleaned = -0.00102291 Jy ! Component: 900 - total flux cleaned = -0.00105974 Jy ! Component: 950 - total flux cleaned = -0.00104725 Jy ! Component: 1000 - total flux cleaned = -0.0010472 Jy ! Component: 1050 - total flux cleaned = -0.00107124 Jy ! Component: 1100 - total flux cleaned = -0.00109485 Jy ! Component: 1150 - total flux cleaned = -0.00113005 Jy ! Component: 1200 - total flux cleaned = -0.00115315 Jy ! Component: 1250 - total flux cleaned = -0.00118743 Jy ! Component: 1300 - total flux cleaned = -0.00121022 Jy ! Component: 1350 - total flux cleaned = -0.00126623 Jy ! Component: 1400 - total flux cleaned = -0.00123289 Jy ! Component: 1450 - total flux cleaned = -0.00126603 Jy ! Component: 1500 - total flux cleaned = -0.00127694 Jy ! Component: 1550 - total flux cleaned = -0.00127691 Jy ! Component: 1600 - total flux cleaned = -0.00126638 Jy ! Component: 1650 - total flux cleaned = -0.00127702 Jy ! Component: 1700 - total flux cleaned = -0.00127708 Jy ! Component: 1750 - total flux cleaned = -0.00119328 Jy ! Component: 1800 - total flux cleaned = -0.00120394 Jy ! Component: 1850 - total flux cleaned = -0.00119379 Jy ! Component: 1900 - total flux cleaned = -0.00118349 Jy ! Component: 1950 - total flux cleaned = -0.00117325 Jy ! Component: 2000 - total flux cleaned = -0.00119334 Jy ! Component: 2050 - total flux cleaned = -0.00113334 Jy ! Component: 2100 - total flux cleaned = -0.0011532 Jy ! Component: 2150 - total flux cleaned = -0.00112363 Jy ! Component: 2200 - total flux cleaned = -0.00112364 Jy ! Component: 2250 - total flux cleaned = -0.00109447 Jy ! Component: 2300 - total flux cleaned = -0.0010945 Jy ! Component: 2350 - total flux cleaned = -0.00113277 Jy ! Component: 2400 - total flux cleaned = -0.00108522 Jy ! Component: 2450 - total flux cleaned = -0.00105686 Jy ! Component: 2500 - total flux cleaned = -0.00105691 Jy ! Component: 2550 - total flux cleaned = -0.00104751 Jy ! Component: 2600 - total flux cleaned = -0.00101038 Jy ! Component: 2650 - total flux cleaned = -0.00101944 Jy ! Component: 2700 - total flux cleaned = -0.000991763 Jy ! Component: 2750 - total flux cleaned = -0.000973589 Jy ! Component: 2800 - total flux cleaned = -0.000910208 Jy ! Component: 2850 - total flux cleaned = -0.000892215 Jy ! Component: 2900 - total flux cleaned = -0.000892307 Jy ! Component: 2950 - total flux cleaned = -0.000839025 Jy ! Component: 3000 - total flux cleaned = -0.000803703 Jy ! Component: 3050 - total flux cleaned = -0.000812444 Jy ! Component: 3100 - total flux cleaned = -0.000760129 Jy ! Component: 3150 - total flux cleaned = -0.000742915 Jy ! Component: 3200 - total flux cleaned = -0.000742813 Jy ! Component: 3250 - total flux cleaned = -0.000708407 Jy ! Component: 3300 - total flux cleaned = -0.00067423 Jy ! Component: 3350 - total flux cleaned = -0.000623322 Jy ! Component: 3400 - total flux cleaned = -0.000598047 Jy ! Component: 3450 - total flux cleaned = -0.000606406 Jy ! Component: 3500 - total flux cleaned = -0.000547972 Jy ! Component: 3550 - total flux cleaned = -0.000522931 Jy ! Component: 3600 - total flux cleaned = -0.000489883 Jy ! Component: 3650 - total flux cleaned = -0.000456956 Jy ! Component: 3700 - total flux cleaned = -0.000465198 Jy ! Component: 3750 - total flux cleaned = -0.0003919 Jy ! Component: 3800 - total flux cleaned = -0.000383805 Jy ! Component: 3850 - total flux cleaned = -0.000319384 Jy ! Component: 3900 - total flux cleaned = -0.000303409 Jy ! Component: 3950 - total flux cleaned = -0.00032736 Jy ! Component: 4000 - total flux cleaned = -0.000279676 Jy ! Component: 4050 - total flux cleaned = -0.000240212 Jy ! Total flux subtracted in 4096 components = -0.00020869 Jy ! Clean residual min=-0.000426 max=0.000424 Jy/beam ! Clean residual mean=0.000000 rms=0.000133 Jy/beam ! Combined flux in latest and established models = 0.131386 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 471 components and 0.131386 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1317+3925_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8128 x 1.85 at 0.2952 degrees (North through East) ! Clean map min=-0.0010344 max=0.042735 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1317+3925_X_map.fits wmodel /vlbi/bp222/temp_maps//J1317+3925_X_map.mod ! Writing 471 model components to file: /vlbi/bp222/temp_maps//J1317+3925_X_map.mod wobs /vlbi/bp222/temp_maps//J1317+3925_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1317+3925_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1317+3925_X_map.win ! wwins: Wrote 10 windows to /vlbi/bp222/temp_maps//J1317+3925_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0427349 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000132837 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.932516 0.932516 1.86503 3.73007 7.46013 14.9203 29.8405 59.681 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.042 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 321.71 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1317+3925_X_dfm.log closed on Thu Feb 14 22:53:20 2019