! Started logfile: /vlbi/bp222/maps//J1209+4119_X_dfm.log on Mon Jan 14 16:48:31 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/bp222/maps//J1209+4119_X_uva.fits
! Reading UV FITS file: /vlbi/bp222/maps//J1209+4119_X_uva.fits
! AN table 1: 69 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.977053 visibilities/baseline/integration-bin.
! Found source: J1209+4119
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 29124 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1209+4119_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012971Jy  sigma=16.198066
! Fit after  self-cal, rms=0.856241Jy  sigma=13.684878
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5891 mas, bmaj=1.627 mas, bpa=-13.83 degrees
! Estimated noise=0.532228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0994689 Jy
! Component: 100  -  total flux cleaned = 0.140958 Jy
! Total flux subtracted in 100 components = 0.140958 Jy
! Clean residual min=-0.007185 max=0.019297 Jy/beam
! Clean residual mean=0.000010 rms=0.001575 Jy/beam
! Combined flux in latest and established models = 0.140958 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.140958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073643Jy  sigma=1.107251
! Fit after  self-cal, rms=0.073278Jy  sigma=1.101490
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.022719 Jy
! Component: 100  -  total flux cleaned = 0.0347408 Jy
! Total flux subtracted in 100 components = 0.0347408 Jy
! Clean residual min=-0.003545 max=0.006139 Jy/beam
! Clean residual mean=0.000005 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.175699 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 7 components and 0.175699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064041Jy  sigma=0.938429
! Fit after  self-cal, rms=0.063947Jy  sigma=0.936994
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00698947 Jy
! Component: 100  -  total flux cleaned = 0.0108504 Jy
! Total flux subtracted in 100 components = 0.0108504 Jy
! Clean residual min=-0.002982 max=0.005141 Jy/beam
! Clean residual mean=0.000004 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 0.186549 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.186549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062918Jy  sigma=0.919268
! Fit after  self-cal, rms=0.062911Jy  sigma=0.919130
! Inverting map 
! Added new window around map position (-2, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00454249 Jy
! Component: 100  -  total flux cleaned = 0.00724383 Jy
! Total flux subtracted in 100 components = 0.00724383 Jy
! Clean residual min=-0.002990 max=0.004097 Jy/beam
! Clean residual mean=0.000003 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.193793 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 22 components and 0.193793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062410Jy  sigma=0.909401
! Fit after  self-cal, rms=0.062367Jy  sigma=0.908876
! Inverting map 
! Added new window around map position (2.2, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00351247 Jy
! Component: 100  -  total flux cleaned = 0.00571532 Jy
! Total flux subtracted in 100 components = 0.00571532 Jy
! Clean residual min=-0.002425 max=0.002448 Jy/beam
! Clean residual mean=0.000002 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.199508 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 34 components and 0.199508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062064Jy  sigma=0.902705
! Fit after  self-cal, rms=0.062046Jy  sigma=0.902548
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.791 mas, bmaj=1.888 mas, bpa=-13.41 degrees
! Estimated noise=0.266837 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00377937 Jy
! Component: 100  -  total flux cleaned = 0.00633995 Jy
! Component: 150  -  total flux cleaned = 0.00834972 Jy
! Component: 200  -  total flux cleaned = 0.00996697 Jy
! Total flux subtracted in 200 components = 0.00996697 Jy
! Clean residual min=-0.002001 max=0.002335 Jy/beam
! Clean residual mean=0.000003 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.209475 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 65 components and 0.209475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061769Jy  sigma=0.897035
! Fit after  self-cal, rms=0.061762Jy  sigma=0.896933
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.791 x 1.888 at -13.41 degrees (North through East)
! Clean map  min=-0.0019563  max=0.14137 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.98     KP        1.01     
!   LA        0.98     MK        1.04     NL        1.01     PT        0.96     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.97     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.04     PT        0.95     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.98     KP        1.03     
!   LA        0.98     MK        1.01     NL        1.03     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.97     KP        1.03     
!   LA        0.99     MK        1.05     NL        1.02     PT        0.95     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.96     KP        1.01     
!   LA        0.99     MK        0.96     NL        1.02     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.96     KP        1.03     
!   LA        0.99     MK        1.02     NL        1.03     PT        0.96     
!   SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.95     KP        1.04     
!   LA        0.98     MK        1.01     NL        1.01     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.97     KP        1.03     
!   LA        1.00     MK        0.99     NL        1.02     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.98     KP        1.03     
!   LA        0.98     MK        1.00     NL        1.02     PT        0.98     
!   SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        0.97     KP        1.02     
!   LA        0.99     MK        1.03     NL        1.04     PT        0.95     
!   SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.01     KP        1.02     
!   LA        0.98     MK        0.96     NL        1.02     PT        0.98     
!   SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.99     KP        1.02     
!   LA        0.99     MK        0.98     NL        1.02     PT        0.97     
!   SC        1.03     
! 
! 
! Fit before self-cal, rms=0.061762Jy  sigma=0.896933
! Fit after  self-cal, rms=0.061432Jy  sigma=0.892561
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7934 mas, bmaj=1.894 mas, bpa=-13.6 degrees
! Estimated noise=0.266829 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000715365 Jy
! Component: 100  -  total flux cleaned = -0.000626909 Jy
! Component: 150  -  total flux cleaned = -0.000576222 Jy
! Component: 200  -  total flux cleaned = -0.00050724 Jy
! Total flux subtracted in 200 components = -0.00050724 Jy
! Clean residual min=-0.001450 max=0.001605 Jy/beam
! Clean residual mean=0.000001 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.208968 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 85 components and 0.208968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061402Jy  sigma=0.892007
! Fit after  self-cal, rms=0.061405Jy  sigma=0.891962
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061405Jy  sigma=0.891962
! Fit after  self-cal, rms=0.061546Jy  sigma=0.890016
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.794 mas, bmaj=1.892 mas, bpa=-13.48 degrees
! Estimated noise=0.267209 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000124749 Jy
! Component: 100  -  total flux cleaned = 1.37736e-05 Jy
! Component: 150  -  total flux cleaned = 9.31616e-05 Jy
! Component: 200  -  total flux cleaned = 0.000178921 Jy
! Total flux subtracted in 200 components = 0.000178921 Jy
! Clean residual min=-0.001302 max=0.001420 Jy/beam
! Clean residual mean=0.000001 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.209147 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 101 components and 0.209147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061529Jy  sigma=0.889734
! Fit after  self-cal, rms=0.061533Jy  sigma=0.889716
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.2, -8.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138583 Jy
! Component: 100  -  total flux cleaned = 0.00228337 Jy
! Component: 150  -  total flux cleaned = 0.00295001 Jy
! Component: 200  -  total flux cleaned = 0.00351495 Jy
! Total flux subtracted in 200 components = 0.00351495 Jy
! Clean residual min=-0.001162 max=0.001129 Jy/beam
! Clean residual mean=0.000000 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.212662 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 125 components and 0.212662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061497Jy  sigma=0.889012
! Fit after  self-cal, rms=0.061495Jy  sigma=0.888987
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061495Jy  sigma=0.888987
! Fit after  self-cal, rms=0.061509Jy  sigma=0.888287
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7935 mas, bmaj=1.892 mas, bpa=-13.47 degrees
! Estimated noise=0.26692 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.93118e-05 Jy
! Component: 100  -  total flux cleaned = 0.000314373 Jy
! Component: 150  -  total flux cleaned = 0.000516739 Jy
! Component: 200  -  total flux cleaned = 0.000684352 Jy
! Total flux subtracted in 200 components = 0.000684352 Jy
! Clean residual min=-0.001102 max=0.001111 Jy/beam
! Clean residual mean=0.000000 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.213346 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 133 components and 0.213346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061497Jy  sigma=0.888090
! Fit after  self-cal, rms=0.061500Jy  sigma=0.888084
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000209077 Jy
! Component: 100  -  total flux cleaned = 0.000326794 Jy
! Component: 150  -  total flux cleaned = 0.000424299 Jy
! Component: 200  -  total flux cleaned = 0.00050383 Jy
! Total flux subtracted in 200 components = 0.00050383 Jy
! Clean residual min=-0.001105 max=0.001135 Jy/beam
! Clean residual mean=-0.000000 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.21385 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 142 components and 0.21385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061494Jy  sigma=0.887990
! Fit after  self-cal, rms=0.061495Jy  sigma=0.887990
! Inverting map 
! Added new window around map position (8.6, -28.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000800777 Jy
! Component: 100  -  total flux cleaned = 0.000817341 Jy
! Component: 150  -  total flux cleaned = 0.000983125 Jy
! Component: 200  -  total flux cleaned = 0.0011061 Jy
! Total flux subtracted in 200 components = 0.0011061 Jy
! Clean residual min=-0.001060 max=0.001117 Jy/beam
! Clean residual mean=-0.000000 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.214956 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 158 components and 0.214956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061478Jy  sigma=0.887713
! Fit after  self-cal, rms=0.061477Jy  sigma=0.887696
! Inverting map 
! Added new window around map position (-7.2, 21.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000915518 Jy
! Component: 100  -  total flux cleaned = 0.00118043 Jy
! Component: 150  -  total flux cleaned = 0.00146602 Jy
! Component: 200  -  total flux cleaned = 0.0017448 Jy
! Total flux subtracted in 200 components = 0.0017448 Jy
! Clean residual min=-0.000993 max=0.000995 Jy/beam
! Clean residual mean=-0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.216701 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 178 components and 0.216701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061456Jy  sigma=0.887401
! Fit after  self-cal, rms=0.061456Jy  sigma=0.887384
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061456Jy  sigma=0.887384
! Fit after  self-cal, rms=0.061399Jy  sigma=0.887324
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.049 mas, bmaj=2.562 mas, bpa=-24.86 degrees
! Estimated noise=0.349372 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000334295 Jy
! Component: 100  -  total flux cleaned = 0.00064956 Jy
! Component: 150  -  total flux cleaned = 0.000919236 Jy
! Component: 200  -  total flux cleaned = 0.00111632 Jy
! Total flux subtracted in 200 components = 0.00111632 Jy
! Clean residual min=-0.001186 max=0.001126 Jy/beam
! Clean residual mean=-0.000001 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.217817 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 198 components and 0.217817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061395Jy  sigma=0.887263
! Fit after  self-cal, rms=0.061395Jy  sigma=0.887249
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000244471 Jy
! Component: 100  -  total flux cleaned = 0.00031482 Jy
! Component: 150  -  total flux cleaned = 0.000410968 Jy
! Component: 200  -  total flux cleaned = 0.000484688 Jy
! Total flux subtracted in 200 components = 0.000484688 Jy
! Clean residual min=-0.001154 max=0.001041 Jy/beam
! Clean residual mean=-0.000001 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.218302 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 203 components and 0.218302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061393Jy  sigma=0.887237
! Fit after  self-cal, rms=0.061393Jy  sigma=0.887237
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7929 mas, bmaj=1.891 mas, bpa=-13.48 degrees
! Estimated noise=0.266789 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7929 x 1.891 at -13.48 degrees (North through East)
! Clean map  min=-0.00086848  max=0.14131 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5891 mas, bmaj=1.628 mas, bpa=-13.8 degrees
! Estimated noise=0.533239 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0999525 Jy
! Component: 100  -  total flux cleaned = 0.142694 Jy
! Component: 150  -  total flux cleaned = 0.164736 Jy
! Component: 200  -  total flux cleaned = 0.176531 Jy
! Total flux subtracted in 200 components = 0.176531 Jy
! Clean residual min=-0.002709 max=0.005662 Jy/beam
! Clean residual mean=0.000004 rms=0.000661 Jy/beam
! Combined flux in latest and established models = 0.176531 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.176531 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7929 mas, bmaj=1.891 mas, bpa=-13.48 degrees
! Estimated noise=0.266789 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00906176 Jy
! Component: 100  -  total flux cleaned = 0.0142267 Jy
! Component: 150  -  total flux cleaned = 0.0177678 Jy
! Component: 200  -  total flux cleaned = 0.020468 Jy
! Total flux subtracted in 200 components = 0.020468 Jy
! Clean residual min=-0.001749 max=0.002033 Jy/beam
! Clean residual mean=0.000004 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.196999 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 40 components and 0.196999 Jy
! Inverting map 
! Added new window around map position (1, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223539 Jy
! Component: 100  -  total flux cleaned = 0.00401924 Jy
! Component: 150  -  total flux cleaned = 0.00558476 Jy
! Component: 200  -  total flux cleaned = 0.00698613 Jy
! Total flux subtracted in 200 components = 0.00698613 Jy
! Clean residual min=-0.001407 max=0.001116 Jy/beam
! Clean residual mean=0.000002 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.203985 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 68 components and 0.203985 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.049 mas, bmaj=2.562 mas, bpa=-24.86 degrees
! Estimated noise=0.349372 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232619 Jy
! Component: 100  -  total flux cleaned = 0.00410592 Jy
! Component: 150  -  total flux cleaned = 0.00555342 Jy
! Component: 200  -  total flux cleaned = 0.00675903 Jy
! Total flux subtracted in 200 components = 0.00675903 Jy
! Clean residual min=-0.001414 max=0.001372 Jy/beam
! Clean residual mean=0.000002 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.210744 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105572 Jy
! Component: 100  -  total flux cleaned = 0.00199401 Jy
! Component: 150  -  total flux cleaned = 0.00282939 Jy
! Component: 200  -  total flux cleaned = 0.00351706 Jy
! Total flux subtracted in 200 components = 0.00351706 Jy
! Clean residual min=-0.001240 max=0.001225 Jy/beam
! Clean residual mean=0.000001 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.214261 Jy
! Adding 122 model components to the UV plane model.
! The established model now contains 181 components and 0.214261 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7929 mas, bmaj=1.891 mas, bpa=-13.48 degrees
! Estimated noise=0.266789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000549131 Jy
! Component: 100  -  total flux cleaned = 0.00117188 Jy
! Component: 150  -  total flux cleaned = 0.00166022 Jy
! Component: 200  -  total flux cleaned = 0.00204358 Jy
! Total flux subtracted in 200 components = 0.00204358 Jy
! Clean residual min=-0.001028 max=0.000949 Jy/beam
! Clean residual mean=0.000000 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.216304 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 205 components and 0.216304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061414Jy  sigma=0.887599
! Fit after  self-cal, rms=0.061412Jy  sigma=0.887542
wmodel J1209+4119_X_map.mod
! Writing 205 model components to file: J1209+4119_X_map.mod
wobs   J1209+4119_X_uvs.fits
! Writing UV FITS file: J1209+4119_X_uvs.fits
wwins  J1209+4119_X_map.win
! wwins: Wrote 8 windows to J1209+4119_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000342632 Jy
! Component: 100  -  total flux cleaned = -0.000483428 Jy
! Component: 150  -  total flux cleaned = -0.000550547 Jy
! Component: 200  -  total flux cleaned = -0.000680567 Jy
! Component: 250  -  total flux cleaned = -0.000822926 Jy
! Component: 300  -  total flux cleaned = -0.000962114 Jy
! Component: 350  -  total flux cleaned = -0.00111321 Jy
! Component: 400  -  total flux cleaned = -0.00123138 Jy
! Component: 450  -  total flux cleaned = -0.00128934 Jy
! Component: 500  -  total flux cleaned = -0.00136099 Jy
! Component: 550  -  total flux cleaned = -0.00145925 Jy
! Component: 600  -  total flux cleaned = -0.00148707 Jy
! Component: 650  -  total flux cleaned = -0.0015687 Jy
! Component: 700  -  total flux cleaned = -0.00160901 Jy
! Component: 750  -  total flux cleaned = -0.00168828 Jy
! Component: 800  -  total flux cleaned = -0.00174026 Jy
! Component: 850  -  total flux cleaned = -0.00179155 Jy
! Component: 900  -  total flux cleaned = -0.00182943 Jy
! Component: 950  -  total flux cleaned = -0.0018669 Jy
! Component: 1000  -  total flux cleaned = -0.00191606 Jy
! Component: 1050  -  total flux cleaned = -0.00194026 Jy
! Component: 1100  -  total flux cleaned = -0.00196416 Jy
! Component: 1150  -  total flux cleaned = -0.0019878 Jy
! Component: 1200  -  total flux cleaned = -0.00198788 Jy
! Component: 1250  -  total flux cleaned = -0.00198783 Jy
! Component: 1300  -  total flux cleaned = -0.00199919 Jy
! Component: 1350  -  total flux cleaned = -0.00197649 Jy
! Component: 1400  -  total flux cleaned = -0.00196529 Jy
! Component: 1450  -  total flux cleaned = -0.00195413 Jy
! Component: 1500  -  total flux cleaned = -0.00196521 Jy
! Component: 1550  -  total flux cleaned = -0.00200889 Jy
! Component: 1600  -  total flux cleaned = -0.00198713 Jy
! Component: 1650  -  total flux cleaned = -0.00197647 Jy
! Component: 1700  -  total flux cleaned = -0.00197641 Jy
! Component: 1750  -  total flux cleaned = -0.00193416 Jy
! Component: 1800  -  total flux cleaned = -0.00191327 Jy
! Component: 1850  -  total flux cleaned = -0.00191318 Jy
! Component: 1900  -  total flux cleaned = -0.00191307 Jy
! Component: 1950  -  total flux cleaned = -0.00184154 Jy
! Component: 2000  -  total flux cleaned = -0.00188214 Jy
! Component: 2050  -  total flux cleaned = -0.00184193 Jy
! Component: 2100  -  total flux cleaned = -0.00181204 Jy
! Component: 2150  -  total flux cleaned = -0.00184186 Jy
! Component: 2200  -  total flux cleaned = -0.001832 Jy
! Component: 2250  -  total flux cleaned = -0.00179294 Jy
! Component: 2300  -  total flux cleaned = -0.00176398 Jy
! Component: 2350  -  total flux cleaned = -0.00180242 Jy
! Component: 2400  -  total flux cleaned = -0.00177374 Jy
! Component: 2450  -  total flux cleaned = -0.00171681 Jy
! Component: 2500  -  total flux cleaned = -0.00173566 Jy
! Component: 2550  -  total flux cleaned = -0.00176369 Jy
! Component: 2600  -  total flux cleaned = -0.00173578 Jy
! Component: 2650  -  total flux cleaned = -0.00171728 Jy
! Component: 2700  -  total flux cleaned = -0.00168984 Jy
! Component: 2750  -  total flux cleaned = -0.00173544 Jy
! Component: 2800  -  total flux cleaned = -0.00168119 Jy
! Component: 2850  -  total flux cleaned = -0.0016812 Jy
! Component: 2900  -  total flux cleaned = -0.00169019 Jy
! Component: 2950  -  total flux cleaned = -0.00164594 Jy
! Component: 3000  -  total flux cleaned = -0.00165482 Jy
! Component: 3050  -  total flux cleaned = -0.00166361 Jy
! Component: 3100  -  total flux cleaned = -0.00165495 Jy
! Component: 3150  -  total flux cleaned = -0.00165497 Jy
! Component: 3200  -  total flux cleaned = -0.00163772 Jy
! Component: 3250  -  total flux cleaned = -0.00160348 Jy
! Component: 3300  -  total flux cleaned = -0.00161199 Jy
! Component: 3350  -  total flux cleaned = -0.00164577 Jy
! Component: 3400  -  total flux cleaned = -0.001629 Jy
! Component: 3450  -  total flux cleaned = -0.0016541 Jy
! Component: 3500  -  total flux cleaned = -0.00162919 Jy
! Component: 3550  -  total flux cleaned = -0.00162099 Jy
! Component: 3600  -  total flux cleaned = -0.00165388 Jy
! Component: 3650  -  total flux cleaned = -0.00162118 Jy
! Component: 3700  -  total flux cleaned = -0.0016538 Jy
! Component: 3750  -  total flux cleaned = -0.0016781 Jy
! Component: 3800  -  total flux cleaned = -0.00167804 Jy
! Component: 3850  -  total flux cleaned = -0.00167803 Jy
! Component: 3900  -  total flux cleaned = -0.00168606 Jy
! Component: 3950  -  total flux cleaned = -0.00168605 Jy
! Component: 4000  -  total flux cleaned = -0.00170968 Jy
! Component: 4050  -  total flux cleaned = -0.00170968 Jy
! Total flux subtracted in 4096 components = -0.00170188 Jy
! Clean residual min=-0.000520 max=0.000446 Jy/beam
! Clean residual mean=-0.000000 rms=0.000132 Jy/beam
! Combined flux in latest and established models = 0.214603 Jy
keep
! Adding 315 model components to the UV plane model.
! The established model now contains 520 components and 0.214603 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/bp222/maps//J1209+4119_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7929 x 1.891 at -13.48 degrees (North through East)
! Clean map  min=-0.00071378  max=0.14131 Jy/beam
! Writing clean map to FITS file: /vlbi/bp222/maps//J1209+4119_X_map.fits
wmodel /vlbi/bp222/maps//J1209+4119_X_map.mod
! Writing 520 model components to file: /vlbi/bp222/maps//J1209+4119_X_map.mod
wobs   /vlbi/bp222/maps//J1209+4119_X_uvs.fits
! Writing UV FITS file: /vlbi/bp222/maps//J1209+4119_X_uvs.fits
wwins  /vlbi/bp222/maps//J1209+4119_X_map.win
! wwins: Wrote 9 windows to /vlbi/bp222/maps//J1209+4119_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.141309 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000131724 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.279652 0.279652 0.559303 1.11861 2.23721 4.47443 8.94885 17.8977 35.7954 71.5908
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.141 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1072.76 
quit
! Quitting program
! Log file /vlbi/bp222/maps//J1209+4119_X_dfm.log closed on Mon Jan 14 16:48:37 2019