! Started logfile: /vlbi/bp222/temp_maps//J1154+6022_X_dfm.log on Thu Feb 14 22:50:56 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1154+6022_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1154+6022_X_uvm.fits ! AN table 1: 67 integrations on 45 of 45 possible baselines. ! AN table 2: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.93985 visibilities/baseline/integration-bin. ! Found source: J1154+6022 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 40500 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1154+6022_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 34 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.052326Jy sigma=15.771133 ! Fit after self-cal, rms=0.676746Jy sigma=10.055011 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6838 mas, bmaj=1.212 mas, bpa=9.47 degrees ! Estimated noise=0.477021 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.254929 Jy ! Component: 100 - total flux cleaned = 0.312208 Jy ! Total flux subtracted in 100 components = 0.312208 Jy ! Clean residual min=-0.006771 max=0.020136 Jy/beam ! Clean residual mean=0.000016 rms=0.002036 Jy/beam ! Combined flux in latest and established models = 0.312208 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.312208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078428Jy sigma=1.180274 ! Fit after self-cal, rms=0.078418Jy sigma=1.180123 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212208 Jy ! Component: 100 - total flux cleaned = 0.0301728 Jy ! Total flux subtracted in 100 components = 0.0301728 Jy ! Clean residual min=-0.007066 max=0.015219 Jy/beam ! Clean residual mean=0.000013 rms=0.001778 Jy/beam ! Combined flux in latest and established models = 0.342381 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 9 components and 0.342381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073959Jy sigma=1.097178 ! Fit after self-cal, rms=0.073961Jy sigma=1.097096 ! Inverting map ! Added new window around map position (1.6, 12). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144492 Jy ! Component: 100 - total flux cleaned = 0.0161266 Jy ! Total flux subtracted in 100 components = 0.0161266 Jy ! Clean residual min=-0.006641 max=0.014152 Jy/beam ! Clean residual mean=0.000011 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 0.358508 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 21 components and 0.358508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071896Jy sigma=1.061745 ! Fit after self-cal, rms=0.071663Jy sigma=1.057309 ! Inverting map ! Added new window around map position (-1.4, -11.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115092 Jy ! Component: 100 - total flux cleaned = 0.0164062 Jy ! Total flux subtracted in 100 components = 0.0164062 Jy ! Clean residual min=-0.006429 max=0.009099 Jy/beam ! Clean residual mean=0.000008 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 0.374914 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.374914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070238Jy sigma=1.033834 ! Fit after self-cal, rms=0.070169Jy sigma=1.032578 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9051 mas, bmaj=1.502 mas, bpa=9.186 degrees ! Estimated noise=0.248689 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.11823e-05 Jy ! Component: 100 - total flux cleaned = -0.000453184 Jy ! Component: 150 - total flux cleaned = -0.00108134 Jy ! Component: 200 - total flux cleaned = -0.00152441 Jy ! Total flux subtracted in 200 components = -0.00152441 Jy ! Clean residual min=-0.006682 max=0.009366 Jy/beam ! Clean residual mean=0.000068 rms=0.001874 Jy/beam ! Combined flux in latest and established models = 0.37339 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 42 components and 0.37339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069707Jy sigma=1.024810 ! Fit after self-cal, rms=0.069679Jy sigma=1.024487 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9051 x 1.502 at 9.186 degrees (North through East) ! Clean map min=-0.0064428 max=0.32279 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 1.01 KP 1.05 ! LA 1.02 MK 1.03 NL 1.03 OV 1.06 ! PT 1.04 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 0.85 HN 0.84 KP 0.88 ! LA 0.87 MK 1.01 NL 0.98 PT 0.82 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.01 KP 1.04 ! LA 1.02 MK 1.03 NL 1.04 OV 1.06 ! PT 1.04 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.84 HN 0.84 KP 0.88 ! LA 0.87 MK 1.00 NL 0.99 PT 0.83 ! SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 1.00 KP 1.05 ! LA 1.01 MK 1.03 NL 1.03 OV 1.06 ! PT 1.04 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.86 HN 0.86 KP 0.88 ! LA 0.87 MK 1.01 NL 0.99 PT 0.81 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.99 KP 1.04 ! LA 1.01 MK 1.02 NL 1.03 OV 1.07 ! PT 1.04 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 0.86 HN 0.85 KP 0.87 ! LA 0.87 MK 1.00 NL 1.01 PT 0.83 ! SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.99 KP 1.05 ! LA 1.02 MK 1.02 NL 1.03 OV 1.06 ! PT 1.05 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.87 HN 0.84 KP 0.87 ! LA 0.88 MK 1.01 NL 0.99 PT 0.82 ! SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 1.00 KP 1.05 ! LA 1.00 MK 1.04 NL 1.04 OV 1.06 ! PT 1.04 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.86 HN 0.84 KP 0.88 ! LA 0.87 MK 1.02 NL 1.01 PT 0.82 ! SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 1.00 KP 1.04 ! LA 1.02 MK 1.03 NL 1.02 OV 1.06 ! PT 1.03 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.85 HN 0.82 KP 0.88 ! LA 0.89 MK 0.99 NL 1.00 PT 0.81 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 1.00 KP 1.04 ! LA 1.00 MK 1.02 NL 1.04 OV 1.05 ! PT 1.04 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.86 HN 0.83 KP 0.88 ! LA 0.87 MK 1.00 NL 0.99 PT 0.82 ! SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.99 KP 1.04 ! LA 1.01 MK 1.02 NL 1.02 OV 1.05 ! PT 1.04 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.85 HN 0.83 KP 0.88 ! LA 0.87 MK 1.01 NL 0.99 PT 0.82 ! SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.00 KP 1.04 ! LA 1.01 MK 1.03 NL 1.03 OV 1.06 ! PT 1.03 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.86 HN 0.84 KP 0.87 ! LA 0.88 MK 0.99 NL 1.00 PT 0.82 ! SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.99 KP 1.06 ! LA 1.01 MK 1.03 NL 1.01 OV 1.05 ! PT 1.04 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.86 HN 0.83 KP 0.89 ! LA 0.88 MK 0.99 NL 0.98 PT 0.83 ! SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.00 KP 1.05 ! LA 1.01 MK 1.03 NL 1.03 OV 1.06 ! PT 1.01 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.85 HN 0.83 KP 0.89 ! LA 0.87 MK 0.97 NL 1.00 PT 0.81 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.069679Jy sigma=1.024487 ! Fit after self-cal, rms=0.056746Jy sigma=0.789126 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9078 mas, bmaj=1.503 mas, bpa=10.44 degrees ! Estimated noise=0.250459 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00952027 Jy ! Component: 100 - total flux cleaned = -0.0120424 Jy ! Component: 150 - total flux cleaned = -0.014017 Jy ! Component: 200 - total flux cleaned = -0.0151435 Jy ! Total flux subtracted in 200 components = -0.0151435 Jy ! Clean residual min=-0.002833 max=0.003825 Jy/beam ! Clean residual mean=0.000005 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.358246 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 59 components and 0.358246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054801Jy sigma=0.762684 ! Fit after self-cal, rms=0.054768Jy sigma=0.762365 ! Inverting map ! Added new window around map position (1, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122999 Jy ! Component: 100 - total flux cleaned = 0.000509142 Jy ! Component: 150 - total flux cleaned = -0.000308072 Jy ! Component: 200 - total flux cleaned = -0.00103479 Jy ! Total flux subtracted in 200 components = -0.00103479 Jy ! Clean residual min=-0.002749 max=0.002303 Jy/beam ! Clean residual mean=0.000006 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.357211 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 72 components and 0.357211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054375Jy sigma=0.757072 ! Fit after self-cal, rms=0.054348Jy sigma=0.756864 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054348Jy sigma=0.756864 ! Fit after self-cal, rms=0.053649Jy sigma=0.744302 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9068 mas, bmaj=1.496 mas, bpa=10.41 degrees ! Estimated noise=0.249792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00281626 Jy ! Component: 100 - total flux cleaned = -0.0039978 Jy ! Component: 150 - total flux cleaned = -0.00498564 Jy ! Component: 200 - total flux cleaned = -0.00536477 Jy ! Total flux subtracted in 200 components = -0.00536477 Jy ! Clean residual min=-0.002406 max=0.001453 Jy/beam ! Clean residual mean=0.000002 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.351846 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 0.351846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053313Jy sigma=0.739782 ! Fit after self-cal, rms=0.053299Jy sigma=0.739684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000124834 Jy ! Component: 100 - total flux cleaned = -0.000285675 Jy ! Component: 150 - total flux cleaned = -0.000382225 Jy ! Component: 200 - total flux cleaned = -0.000471565 Jy ! Total flux subtracted in 200 components = -0.000471565 Jy ! Clean residual min=-0.002094 max=0.001348 Jy/beam ! Clean residual mean=0.000003 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.351375 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 0.351375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053204Jy sigma=0.738475 ! Fit after self-cal, rms=0.053195Jy sigma=0.738420 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053195Jy sigma=0.738420 ! Fit after self-cal, rms=0.053075Jy sigma=0.736464 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9063 mas, bmaj=1.496 mas, bpa=10.55 degrees ! Estimated noise=0.249339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00157193 Jy ! Component: 100 - total flux cleaned = -0.00221079 Jy ! Component: 150 - total flux cleaned = -0.00249664 Jy ! Component: 200 - total flux cleaned = -0.00245557 Jy ! Total flux subtracted in 200 components = -0.00245557 Jy ! Clean residual min=-0.001815 max=0.001170 Jy/beam ! Clean residual mean=0.000001 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.348919 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 86 components and 0.348919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052963Jy sigma=0.734995 ! Fit after self-cal, rms=0.052959Jy sigma=0.734966 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.82568e-05 Jy ! Component: 100 - total flux cleaned = 3.88528e-05 Jy ! Component: 150 - total flux cleaned = 7.08601e-05 Jy ! Component: 200 - total flux cleaned = 1.04618e-05 Jy ! Total flux subtracted in 200 components = 1.04618e-05 Jy ! Clean residual min=-0.001641 max=0.001110 Jy/beam ! Clean residual mean=0.000001 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.34893 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.34893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052918Jy sigma=0.734421 ! Fit after self-cal, rms=0.052916Jy sigma=0.734402 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052916Jy sigma=0.734402 ! Fit after self-cal, rms=0.052862Jy sigma=0.733865 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.15 mas, bmaj=2.573 mas, bpa=10.96 degrees ! Estimated noise=0.322992 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121572 Jy ! Component: 100 - total flux cleaned = -0.00146243 Jy ! Component: 150 - total flux cleaned = -0.0016215 Jy ! Component: 200 - total flux cleaned = -0.00170689 Jy ! Total flux subtracted in 200 components = -0.00170689 Jy ! Clean residual min=-0.001154 max=0.001027 Jy/beam ! Clean residual mean=0.000002 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.347223 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 96 components and 0.347223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052826Jy sigma=0.733415 ! Fit after self-cal, rms=0.052818Jy sigma=0.733317 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.86503e-06 Jy ! Component: 100 - total flux cleaned = -2.60156e-05 Jy ! Component: 150 - total flux cleaned = -4.51023e-05 Jy ! Component: 200 - total flux cleaned = -7.37799e-05 Jy ! Total flux subtracted in 200 components = -7.37799e-05 Jy ! Clean residual min=-0.001137 max=0.001030 Jy/beam ! Clean residual mean=0.000002 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.347149 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 104 components and 0.347149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052810Jy sigma=0.733227 ! Fit after self-cal, rms=0.052805Jy sigma=0.733165 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9064 mas, bmaj=1.496 mas, bpa=10.74 degrees ! Estimated noise=0.249014 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9064 x 1.496 at 10.74 degrees (North through East) ! Clean map min=-0.0011025 max=0.3263 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6849 mas, bmaj=1.206 mas, bpa=10.89 degrees ! Estimated noise=0.475575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.254137 Jy ! Component: 100 - total flux cleaned = 0.309921 Jy ! Component: 150 - total flux cleaned = 0.327826 Jy ! Component: 200 - total flux cleaned = 0.337791 Jy ! Total flux subtracted in 200 components = 0.337791 Jy ! Clean residual min=-0.002753 max=0.005117 Jy/beam ! Clean residual mean=0.000001 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.337791 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.337791 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9064 mas, bmaj=1.496 mas, bpa=10.74 degrees ! Estimated noise=0.249014 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00624111 Jy ! Component: 100 - total flux cleaned = 0.00822221 Jy ! Component: 150 - total flux cleaned = 0.0092727 Jy ! Component: 200 - total flux cleaned = 0.00969844 Jy ! Total flux subtracted in 200 components = 0.00969844 Jy ! Clean residual min=-0.001376 max=0.001628 Jy/beam ! Clean residual mean=0.000000 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.34749 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 25 components and 0.34749 Jy ! Inverting map ! Added new window around map position (3.8, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000719543 Jy ! Component: 100 - total flux cleaned = 0.000974989 Jy ! Component: 150 - total flux cleaned = 0.00108905 Jy ! Component: 200 - total flux cleaned = 0.00119321 Jy ! Total flux subtracted in 200 components = 0.00119321 Jy ! Clean residual min=-0.001197 max=0.001341 Jy/beam ! Clean residual mean=-0.000001 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.348683 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 43 components and 0.348683 Jy ! Inverting map ! Added new window around map position (-27.8, -20.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000712492 Jy ! Component: 100 - total flux cleaned = 0.000851286 Jy ! Component: 150 - total flux cleaned = 0.000936005 Jy ! Component: 200 - total flux cleaned = 0.00101685 Jy ! Total flux subtracted in 200 components = 0.00101685 Jy ! Clean residual min=-0.001071 max=0.001171 Jy/beam ! Clean residual mean=-0.000001 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.3497 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 54 components and 0.3497 Jy ! Inverting map ! Added new window around map position (0.8, 8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000696927 Jy ! Component: 100 - total flux cleaned = 0.000837731 Jy ! Component: 150 - total flux cleaned = 0.000935618 Jy ! Component: 200 - total flux cleaned = 0.000934236 Jy ! Total flux subtracted in 200 components = 0.000934236 Jy ! Clean residual min=-0.000972 max=0.001134 Jy/beam ! Clean residual mean=-0.000001 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.350634 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 65 components and 0.350634 Jy ! Inverting map ! Added new window around map position (12.2, 24.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000756686 Jy ! Component: 100 - total flux cleaned = 0.000875742 Jy ! Component: 150 - total flux cleaned = 0.000959488 Jy ! Component: 200 - total flux cleaned = 0.000985812 Jy ! Total flux subtracted in 200 components = 0.000985812 Jy ! Clean residual min=-0.000949 max=0.001066 Jy/beam ! Clean residual mean=-0.000000 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.35162 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 82 components and 0.35162 Jy ! Inverting map ! Added new window around map position (9.6, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000487169 Jy ! Component: 100 - total flux cleaned = 0.000454819 Jy ! Component: 150 - total flux cleaned = 0.000536238 Jy ! Component: 200 - total flux cleaned = 0.000561449 Jy ! Total flux subtracted in 200 components = 0.000561449 Jy ! Clean residual min=-0.000917 max=0.000962 Jy/beam ! Clean residual mean=-0.000000 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.352181 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 101 components and 0.352181 Jy ! Inverting map ! Added new window around map position (0.2, -15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122877 Jy ! Component: 100 - total flux cleaned = 0.000123938 Jy ! Component: 150 - total flux cleaned = 0.000100676 Jy ! Component: 200 - total flux cleaned = 0.00012418 Jy ! Total flux subtracted in 200 components = 0.00012418 Jy ! Clean residual min=-0.000910 max=0.000880 Jy/beam ! Clean residual mean=-0.000000 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.352306 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 116 components and 0.352306 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.15 mas, bmaj=2.573 mas, bpa=10.96 degrees ! Estimated noise=0.322992 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000339325 Jy ! Component: 100 - total flux cleaned = -0.000559818 Jy ! Component: 150 - total flux cleaned = -0.00077627 Jy ! Component: 200 - total flux cleaned = -0.000939314 Jy ! Total flux subtracted in 200 components = -0.000939314 Jy ! Clean residual min=-0.000946 max=0.000893 Jy/beam ! Clean residual mean=0.000001 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.351366 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162795 Jy ! Component: 100 - total flux cleaned = -0.000270846 Jy ! Component: 150 - total flux cleaned = -0.000395529 Jy ! Component: 200 - total flux cleaned = -0.000500719 Jy ! Total flux subtracted in 200 components = -0.000500719 Jy ! Clean residual min=-0.000950 max=0.000886 Jy/beam ! Clean residual mean=0.000002 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.350866 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 150 components and 0.350866 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9064 mas, bmaj=1.496 mas, bpa=10.74 degrees ! Estimated noise=0.249014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467808 Jy ! Component: 100 - total flux cleaned = 0.000559299 Jy ! Component: 150 - total flux cleaned = 0.000646047 Jy ! Component: 200 - total flux cleaned = 0.000646553 Jy ! Total flux subtracted in 200 components = 0.000646553 Jy ! Clean residual min=-0.000837 max=0.000845 Jy/beam ! Clean residual mean=0.000000 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.351512 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 159 components and 0.351512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052666Jy sigma=0.731300 ! Fit after self-cal, rms=0.052652Jy sigma=0.731085 wmodel J1154+6022_X_map.mod ! Writing 159 model components to file: J1154+6022_X_map.mod wobs J1154+6022_X_uvs.fits ! Writing UV FITS file: J1154+6022_X_uvs.fits wwins J1154+6022_X_map.win ! wwins: Wrote 10 windows to J1154+6022_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.59987e-05 Jy ! Component: 100 - total flux cleaned = -1.16437e-06 Jy ! Component: 150 - total flux cleaned = 4.3252e-05 Jy ! Component: 200 - total flux cleaned = 0.000101253 Jy ! Component: 250 - total flux cleaned = 0.000101034 Jy ! Component: 300 - total flux cleaned = 0.000129008 Jy ! Component: 350 - total flux cleaned = 0.000183661 Jy ! Component: 400 - total flux cleaned = 0.000197031 Jy ! Component: 450 - total flux cleaned = 0.000263358 Jy ! Component: 500 - total flux cleaned = 0.000263172 Jy ! Component: 550 - total flux cleaned = 0.000301867 Jy ! Component: 600 - total flux cleaned = 0.000302162 Jy ! Component: 650 - total flux cleaned = 0.000365376 Jy ! Component: 700 - total flux cleaned = 0.000352809 Jy ! Component: 750 - total flux cleaned = 0.000377377 Jy ! Component: 800 - total flux cleaned = 0.000414023 Jy ! Component: 850 - total flux cleaned = 0.000389922 Jy ! Component: 900 - total flux cleaned = 0.000425878 Jy ! Component: 950 - total flux cleaned = 0.00047317 Jy ! Component: 1000 - total flux cleaned = 0.000449798 Jy ! Component: 1050 - total flux cleaned = 0.000496396 Jy ! Component: 1100 - total flux cleaned = 0.000542199 Jy ! Component: 1150 - total flux cleaned = 0.000542294 Jy ! Component: 1200 - total flux cleaned = 0.000564901 Jy ! Component: 1250 - total flux cleaned = 0.00059855 Jy ! Component: 1300 - total flux cleaned = 0.000609858 Jy ! Component: 1350 - total flux cleaned = 0.000664875 Jy ! Component: 1400 - total flux cleaned = 0.000654041 Jy ! Component: 1450 - total flux cleaned = 0.000751667 Jy ! Component: 1500 - total flux cleaned = 0.000805443 Jy ! Component: 1550 - total flux cleaned = 0.000784073 Jy ! Component: 1600 - total flux cleaned = 0.000826507 Jy ! Component: 1650 - total flux cleaned = 0.000879121 Jy ! Component: 1700 - total flux cleaned = 0.000952293 Jy ! Component: 1750 - total flux cleaned = 0.000962707 Jy ! Component: 1800 - total flux cleaned = 0.00103486 Jy ! Component: 1850 - total flux cleaned = 0.00102453 Jy ! Component: 1900 - total flux cleaned = 0.00106518 Jy ! Component: 1950 - total flux cleaned = 0.00109558 Jy ! Component: 2000 - total flux cleaned = 0.00114572 Jy ! Component: 2050 - total flux cleaned = 0.00113575 Jy ! Component: 2100 - total flux cleaned = 0.00116541 Jy ! Component: 2150 - total flux cleaned = 0.00117522 Jy ! Component: 2200 - total flux cleaned = 0.001185 Jy ! Component: 2250 - total flux cleaned = 0.00120443 Jy ! Component: 2300 - total flux cleaned = 0.00123353 Jy ! Component: 2350 - total flux cleaned = 0.00128175 Jy ! Component: 2400 - total flux cleaned = 0.00128166 Jy ! Component: 2450 - total flux cleaned = 0.00131025 Jy ! Component: 2500 - total flux cleaned = 0.00134813 Jy ! Component: 2550 - total flux cleaned = 0.00134804 Jy ! Component: 2600 - total flux cleaned = 0.00140427 Jy ! Component: 2650 - total flux cleaned = 0.00140422 Jy ! Component: 2700 - total flux cleaned = 0.00142286 Jy ! Component: 2750 - total flux cleaned = 0.00146897 Jy ! Component: 2800 - total flux cleaned = 0.00152413 Jy ! Component: 2850 - total flux cleaned = 0.00151495 Jy ! Component: 2900 - total flux cleaned = 0.00154238 Jy ! Component: 2950 - total flux cleaned = 0.0015605 Jy ! Component: 3000 - total flux cleaned = 0.00159663 Jy ! Component: 3050 - total flux cleaned = 0.00159658 Jy ! Component: 3100 - total flux cleaned = 0.00160553 Jy ! Component: 3150 - total flux cleaned = 0.00164108 Jy ! Component: 3200 - total flux cleaned = 0.00162337 Jy ! Component: 3250 - total flux cleaned = 0.00169381 Jy ! Component: 3300 - total flux cleaned = 0.00167629 Jy ! Component: 3350 - total flux cleaned = 0.00174605 Jy ! Component: 3400 - total flux cleaned = 0.00169388 Jy ! Component: 3450 - total flux cleaned = 0.00172848 Jy ! Component: 3500 - total flux cleaned = 0.00174563 Jy ! Component: 3550 - total flux cleaned = 0.00177994 Jy ! Component: 3600 - total flux cleaned = 0.00177138 Jy ! Component: 3650 - total flux cleaned = 0.00178833 Jy ! Component: 3700 - total flux cleaned = 0.00181375 Jy ! Component: 3750 - total flux cleaned = 0.00179698 Jy ! Component: 3800 - total flux cleaned = 0.00180536 Jy ! Component: 3850 - total flux cleaned = 0.00178033 Jy ! Component: 3900 - total flux cleaned = 0.00182193 Jy ! Component: 3950 - total flux cleaned = 0.00183849 Jy ! Component: 4000 - total flux cleaned = 0.001855 Jy ! Component: 4050 - total flux cleaned = 0.00187963 Jy ! Total flux subtracted in 4096 components = 0.00187145 Jy ! Clean residual min=-0.000428 max=0.000522 Jy/beam ! Clean residual mean=0.000000 rms=0.000143 Jy/beam ! Combined flux in latest and established models = 0.353384 Jy keep ! Adding 333 model components to the UV plane model. ! The established model now contains 492 components and 0.353384 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1154+6022_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9064 x 1.496 at 10.74 degrees (North through East) ! Clean map min=-0.00091201 max=0.32747 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1154+6022_X_map.fits wmodel /vlbi/bp222/temp_maps//J1154+6022_X_map.mod ! Writing 492 model components to file: /vlbi/bp222/temp_maps//J1154+6022_X_map.mod wobs /vlbi/bp222/temp_maps//J1154+6022_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1154+6022_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1154+6022_X_map.win ! wwins: Wrote 11 windows to /vlbi/bp222/temp_maps//J1154+6022_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.327466 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000142424 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.130478 0.130478 0.260956 0.521913 1.04383 2.08765 4.1753 8.3506 16.7012 33.4024 66.8048 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.327 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2299.24 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1154+6022_X_dfm.log closed on Thu Feb 14 22:51:03 2019