! Started logfile: /vlbi/bp222/temp_maps//J1127-1857_X_dfm.log on Thu Feb 14 22:50:15 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1127-1857_X_uva.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1127-1857_X_uva.fits ! AN table 1: 78 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.980627 visibilities/baseline/integration-bin. ! Found source: J1127-1857 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 41304 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1127-1857_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.500948Jy sigma=19.007025 ! Fit after self-cal, rms=0.178986Jy sigma=2.171777 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.634 mas, bmaj=1.649 mas, bpa=-4.113 degrees ! Estimated noise=0.51844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.847796 Jy ! Component: 100 - total flux cleaned = 1.03346 Jy ! Total flux subtracted in 100 components = 1.03346 Jy ! Clean residual min=-0.019901 max=0.057260 Jy/beam ! Clean residual mean=0.000008 rms=0.004118 Jy/beam ! Combined flux in latest and established models = 1.03346 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.03346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.161469Jy sigma=1.882509 ! Fit after self-cal, rms=0.161439Jy sigma=1.881892 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0613627 Jy ! Component: 100 - total flux cleaned = 0.0960585 Jy ! Total flux subtracted in 100 components = 0.0960585 Jy ! Clean residual min=-0.013990 max=0.021196 Jy/beam ! Clean residual mean=0.000002 rms=0.002791 Jy/beam ! Combined flux in latest and established models = 1.12952 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 1.12952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132002Jy sigma=1.297989 ! Fit after self-cal, rms=0.131907Jy sigma=1.297134 ! Inverting map ! Added new window around map position (0.8, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0229033 Jy ! Component: 100 - total flux cleaned = 0.0377676 Jy ! Total flux subtracted in 100 components = 0.0377676 Jy ! Clean residual min=-0.013228 max=0.016935 Jy/beam ! Clean residual mean=0.000001 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 1.16728 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 1.16728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.128126Jy sigma=1.188284 ! Fit after self-cal, rms=0.127999Jy sigma=1.186585 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8282 mas, bmaj=2.023 mas, bpa=-4.078 degrees ! Estimated noise=0.291376 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139212 Jy ! Component: 100 - total flux cleaned = 0.0217774 Jy ! Component: 150 - total flux cleaned = 0.0266877 Jy ! Component: 200 - total flux cleaned = 0.0287062 Jy ! Total flux subtracted in 200 components = 0.0287062 Jy ! Clean residual min=-0.014720 max=0.012200 Jy/beam ! Clean residual mean=-0.000000 rms=0.002621 Jy/beam ! Combined flux in latest and established models = 1.19599 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 50 components and 1.19599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.127376Jy sigma=1.149599 ! Fit after self-cal, rms=0.127294Jy sigma=1.148372 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8282 x 2.023 at -4.078 degrees (North through East) ! Clean map min=-0.013747 max=1.1065 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.06 KP 1.00 ! LA 0.98 MK 1.00 NL 0.96 OV 1.00 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.06 KP 1.00 ! LA 0.98 MK 1.01 NL 0.96 OV 1.00 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.06 KP 1.00 ! LA 0.97 MK 1.00 NL 0.96 OV 1.00 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.04 KP 0.99 ! LA 0.97 MK 1.01 NL 0.96 OV 1.00 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.04 KP 1.00 ! LA 0.97 MK 1.01 NL 0.96 OV 1.00 ! PT 1.06 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.05 KP 1.00 ! LA 0.97 MK 1.01 NL 0.96 OV 1.00 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.05 KP 1.00 ! LA 0.97 MK 1.00 NL 0.95 OV 1.00 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.06 KP 0.99 ! LA 0.97 MK 1.01 NL 0.96 OV 1.00 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.04 KP 1.00 ! LA 0.98 MK 1.01 NL 0.94 OV 1.00 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.05 KP 0.99 ! LA 0.98 MK 1.00 NL 0.96 OV 1.00 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.04 KP 0.99 ! LA 0.97 MK 1.01 NL 0.95 OV 1.00 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.04 KP 1.00 ! LA 0.97 MK 1.01 NL 0.95 OV 0.99 ! PT 1.02 SC 0.99 ! ! ! Fit before self-cal, rms=0.127294Jy sigma=1.148372 ! Fit after self-cal, rms=0.119068Jy sigma=1.033368 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8313 mas, bmaj=2.023 mas, bpa=-3.992 degrees ! Estimated noise=0.290808 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00325496 Jy ! Component: 100 - total flux cleaned = -0.00391292 Jy ! Component: 150 - total flux cleaned = -0.0042302 Jy ! Component: 200 - total flux cleaned = -0.00468083 Jy ! Total flux subtracted in 200 components = -0.00468083 Jy ! Clean residual min=-0.011533 max=0.011709 Jy/beam ! Clean residual mean=-0.000003 rms=0.002100 Jy/beam ! Combined flux in latest and established models = 1.19131 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 1.19131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.118694Jy sigma=1.029218 ! Fit after self-cal, rms=0.118679Jy sigma=1.028915 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.118679Jy sigma=1.028915 ! Fit after self-cal, rms=0.085553Jy sigma=0.796481 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8311 mas, bmaj=2.027 mas, bpa=-4.004 degrees ! Estimated noise=0.290923 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143979 Jy ! Component: 100 - total flux cleaned = -0.00202298 Jy ! Component: 150 - total flux cleaned = -0.00244721 Jy ! Component: 200 - total flux cleaned = -0.00286605 Jy ! Total flux subtracted in 200 components = -0.00286605 Jy ! Clean residual min=-0.004903 max=0.005519 Jy/beam ! Clean residual mean=-0.000003 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 1.18844 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 69 components and 1.18844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085459Jy sigma=0.794198 ! Fit after self-cal, rms=0.085442Jy sigma=0.793969 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.8, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281403 Jy ! Component: 100 - total flux cleaned = 0.00351065 Jy ! Component: 150 - total flux cleaned = 0.00330001 Jy ! Component: 200 - total flux cleaned = 0.00330236 Jy ! Total flux subtracted in 200 components = 0.00330236 Jy ! Clean residual min=-0.004573 max=0.004585 Jy/beam ! Clean residual mean=-0.000002 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 1.19174 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 1.19174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084733Jy sigma=0.789692 ! Fit after self-cal, rms=0.084715Jy sigma=0.789337 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084715Jy sigma=0.789337 ! Fit after self-cal, rms=0.070984Jy sigma=0.721213 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.831 mas, bmaj=2.028 mas, bpa=-3.989 degrees ! Estimated noise=0.291074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142996 Jy ! Component: 100 - total flux cleaned = -0.00210218 Jy ! Component: 150 - total flux cleaned = -0.00246578 Jy ! Component: 200 - total flux cleaned = -0.00272487 Jy ! Total flux subtracted in 200 components = -0.00272487 Jy ! Clean residual min=-0.002832 max=0.002302 Jy/beam ! Clean residual mean=-0.000002 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 1.18902 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 99 components and 1.18902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070803Jy sigma=0.718543 ! Fit after self-cal, rms=0.070804Jy sigma=0.718389 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000312925 Jy ! Component: 100 - total flux cleaned = -0.000604033 Jy ! Component: 150 - total flux cleaned = -0.000761311 Jy ! Component: 200 - total flux cleaned = -0.000905881 Jy ! Total flux subtracted in 200 components = -0.000905881 Jy ! Clean residual min=-0.002670 max=0.002148 Jy/beam ! Clean residual mean=-0.000002 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 1.18811 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 102 components and 1.18811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070722Jy sigma=0.717280 ! Fit after self-cal, rms=0.070706Jy sigma=0.717190 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070706Jy sigma=0.717190 ! Fit after self-cal, rms=0.070749Jy sigma=0.716754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.134 mas, bmaj=4.335 mas, bpa=1.154 degrees ! Estimated noise=0.37971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014113 Jy ! Component: 100 - total flux cleaned = 9.287e-05 Jy ! Component: 150 - total flux cleaned = 4.78596e-05 Jy ! Component: 200 - total flux cleaned = 7.98587e-06 Jy ! Total flux subtracted in 200 components = 7.98587e-06 Jy ! Clean residual min=-0.001436 max=0.001564 Jy/beam ! Clean residual mean=-0.000004 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 1.18812 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 107 components and 1.18812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070703Jy sigma=0.716142 ! Fit after self-cal, rms=0.070684Jy sigma=0.715972 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.4, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481574 Jy ! Component: 100 - total flux cleaned = 0.000444244 Jy ! Component: 150 - total flux cleaned = 0.00036255 Jy ! Component: 200 - total flux cleaned = 0.000325605 Jy ! Total flux subtracted in 200 components = 0.000325605 Jy ! Clean residual min=-0.001202 max=0.001181 Jy/beam ! Clean residual mean=-0.000003 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 1.18845 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 131 components and 1.18845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070601Jy sigma=0.714787 ! Fit after self-cal, rms=0.070592Jy sigma=0.714704 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8309 mas, bmaj=2.028 mas, bpa=-3.979 degrees ! Estimated noise=0.291155 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8309 x 2.028 at -3.979 degrees (North through East) ! Clean map min=-0.0017693 max=1.1072 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070592Jy sigma=0.714704 ! Fit after self-cal, rms=0.067200Jy sigma=0.662017 ! Inverting map and beam ! Estimated beam: bmin=0.8308 mas, bmaj=2.028 mas, bpa=-3.983 degrees ! Estimated noise=0.291191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000461044 Jy ! Component: 100 - total flux cleaned = -0.000678024 Jy ! Component: 150 - total flux cleaned = -0.000734379 Jy ! Component: 200 - total flux cleaned = -0.000678011 Jy ! Total flux subtracted in 200 components = -0.000678011 Jy ! Clean residual min=-0.001297 max=0.001283 Jy/beam ! Clean residual mean=-0.000001 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 1.18777 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 145 components and 1.18777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067037Jy sigma=0.660065 ! Fit after self-cal, rms=0.067019Jy sigma=0.659875 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.98033e-05 Jy ! Component: 100 - total flux cleaned = 7.69204e-05 Jy ! Component: 150 - total flux cleaned = 0.000123411 Jy ! Component: 200 - total flux cleaned = 0.000254581 Jy ! Total flux subtracted in 200 components = 0.000254581 Jy ! Clean residual min=-0.001225 max=0.001258 Jy/beam ! Clean residual mean=-0.000001 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 1.18802 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 156 components and 1.18802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066941Jy sigma=0.658959 ! Fit after self-cal, rms=0.066934Jy sigma=0.658896 ! Inverting map ! Added new window around map position (-10.2, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000635125 Jy ! Component: 100 - total flux cleaned = 0.000887704 Jy ! Component: 150 - total flux cleaned = 0.00100671 Jy ! Component: 200 - total flux cleaned = 0.00119533 Jy ! Total flux subtracted in 200 components = 0.00119533 Jy ! Clean residual min=-0.001188 max=0.001172 Jy/beam ! Clean residual mean=-0.000001 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 1.18922 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 174 components and 1.18922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066876Jy sigma=0.658235 ! Fit after self-cal, rms=0.066873Jy sigma=0.658208 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066873Jy sigma=0.658208 ! Fit after self-cal, rms=0.066905Jy sigma=0.658068 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6356 mas, bmaj=1.652 mas, bpa=-4.001 degrees ! Estimated noise=0.520324 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.850851 Jy ! Component: 100 - total flux cleaned = 1.03736 Jy ! Component: 150 - total flux cleaned = 1.09765 Jy ! Component: 200 - total flux cleaned = 1.13055 Jy ! Total flux subtracted in 200 components = 1.13055 Jy ! Clean residual min=-0.006428 max=0.016692 Jy/beam ! Clean residual mean=0.000002 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 1.13055 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 1.13055 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8307 mas, bmaj=2.028 mas, bpa=-3.978 degrees ! Estimated noise=0.291253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0261763 Jy ! Component: 100 - total flux cleaned = 0.0390652 Jy ! Component: 150 - total flux cleaned = 0.0460492 Jy ! Component: 200 - total flux cleaned = 0.0502165 Jy ! Total flux subtracted in 200 components = 0.0502165 Jy ! Clean residual min=-0.001868 max=0.002528 Jy/beam ! Clean residual mean=-0.000002 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 1.18077 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 39 components and 1.18077 Jy ! Inverting map ! Added new window around map position (-0.6, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268634 Jy ! Component: 100 - total flux cleaned = 0.00370829 Jy ! Component: 150 - total flux cleaned = 0.00453219 Jy ! Component: 200 - total flux cleaned = 0.00512933 Jy ! Total flux subtracted in 200 components = 0.00512933 Jy ! Clean residual min=-0.001472 max=0.001561 Jy/beam ! Clean residual mean=-0.000001 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 1.1859 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 62 components and 1.1859 Jy ! Inverting map ! Added new window around map position (-1.6, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000886849 Jy ! Component: 100 - total flux cleaned = 0.00132908 Jy ! Component: 150 - total flux cleaned = 0.00174095 Jy ! Component: 200 - total flux cleaned = 0.00206916 Jy ! Total flux subtracted in 200 components = 0.00206916 Jy ! Clean residual min=-0.001265 max=0.001434 Jy/beam ! Clean residual mean=-0.000001 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 1.18797 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 79 components and 1.18797 Jy ! Inverting map ! Added new window around map position (-2.8, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023658 Jy ! Component: 100 - total flux cleaned = 0.000400356 Jy ! Component: 150 - total flux cleaned = 0.000454847 Jy ! Component: 200 - total flux cleaned = 0.00064687 Jy ! Total flux subtracted in 200 components = 0.00064687 Jy ! Clean residual min=-0.001250 max=0.001341 Jy/beam ! Clean residual mean=-0.000001 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 1.18861 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 95 components and 1.18861 Jy ! Inverting map ! Added new window around map position (1.8, 11.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000751569 Jy ! Component: 100 - total flux cleaned = 0.00093117 Jy ! Component: 150 - total flux cleaned = 0.00106052 Jy ! Component: 200 - total flux cleaned = 0.00122673 Jy ! Total flux subtracted in 200 components = 0.00122673 Jy ! Clean residual min=-0.001130 max=0.001059 Jy/beam ! Clean residual mean=-0.000001 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 1.18984 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 113 components and 1.18984 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.134 mas, bmaj=4.336 mas, bpa=1.137 degrees ! Estimated noise=0.379853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000663908 Jy ! Component: 100 - total flux cleaned = 0.000778655 Jy ! Component: 150 - total flux cleaned = 0.000954577 Jy ! Component: 200 - total flux cleaned = 0.00106829 Jy ! Total flux subtracted in 200 components = 0.00106829 Jy ! Clean residual min=-0.001054 max=0.000961 Jy/beam ! Clean residual mean=-0.000001 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 1.19091 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.25513e-05 Jy ! Component: 100 - total flux cleaned = 0.000139688 Jy ! Component: 150 - total flux cleaned = 0.000228434 Jy ! Component: 200 - total flux cleaned = 0.000244336 Jy ! Total flux subtracted in 200 components = 0.000244336 Jy ! Clean residual min=-0.001037 max=0.000919 Jy/beam ! Clean residual mean=-0.000001 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 1.19115 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 155 components and 1.19115 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8307 mas, bmaj=2.028 mas, bpa=-3.978 degrees ! Estimated noise=0.291253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146868 Jy ! Component: 100 - total flux cleaned = -3.20285e-05 Jy ! Component: 150 - total flux cleaned = 7.83673e-05 Jy ! Component: 200 - total flux cleaned = 0.000149149 Jy ! Total flux subtracted in 200 components = 0.000149149 Jy ! Clean residual min=-0.000996 max=0.000977 Jy/beam ! Clean residual mean=-0.000000 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 1.1913 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 165 components and 1.1913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066815Jy sigma=0.657532 ! Fit after self-cal, rms=0.066773Jy sigma=0.657129 wmodel J1127-1857_X_map.mod ! Writing 165 model components to file: J1127-1857_X_map.mod wobs J1127-1857_X_uvs.fits ! Writing UV FITS file: J1127-1857_X_uvs.fits wwins J1127-1857_X_map.win ! wwins: Wrote 9 windows to J1127-1857_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.79359e-05 Jy ! Component: 100 - total flux cleaned = -0.00015115 Jy ! Component: 150 - total flux cleaned = -0.00013393 Jy ! Component: 200 - total flux cleaned = 3.68256e-07 Jy ! Component: 250 - total flux cleaned = 4.94024e-05 Jy ! Component: 300 - total flux cleaned = 0.000145567 Jy ! Component: 350 - total flux cleaned = 0.000192573 Jy ! Component: 400 - total flux cleaned = 0.000285048 Jy ! Component: 450 - total flux cleaned = 0.000391061 Jy ! Component: 500 - total flux cleaned = 0.000510183 Jy ! Component: 550 - total flux cleaned = 0.000598219 Jy ! Component: 600 - total flux cleaned = 0.000699616 Jy ! Component: 650 - total flux cleaned = 0.000785263 Jy ! Component: 700 - total flux cleaned = 0.00087016 Jy ! Component: 750 - total flux cleaned = 0.000995663 Jy ! Component: 800 - total flux cleaned = 0.0010233 Jy ! Component: 850 - total flux cleaned = 0.00113269 Jy ! Component: 900 - total flux cleaned = 0.00114615 Jy ! Component: 950 - total flux cleaned = 0.00122668 Jy ! Component: 1000 - total flux cleaned = 0.00124009 Jy ! Component: 1050 - total flux cleaned = 0.00133228 Jy ! Component: 1100 - total flux cleaned = 0.00137145 Jy ! Component: 1150 - total flux cleaned = 0.00141037 Jy ! Component: 1200 - total flux cleaned = 0.00144897 Jy ! Component: 1250 - total flux cleaned = 0.00148737 Jy ! Component: 1300 - total flux cleaned = 0.0015253 Jy ! Component: 1350 - total flux cleaned = 0.00158793 Jy ! Component: 1400 - total flux cleaned = 0.00161278 Jy ! Component: 1450 - total flux cleaned = 0.00163753 Jy ! Component: 1500 - total flux cleaned = 0.00172323 Jy ! Component: 1550 - total flux cleaned = 0.00172336 Jy ! Component: 1600 - total flux cleaned = 0.00172345 Jy ! Component: 1650 - total flux cleaned = 0.00177155 Jy ! Component: 1700 - total flux cleaned = 0.00177155 Jy ! Component: 1750 - total flux cleaned = 0.00183094 Jy ! Component: 1800 - total flux cleaned = 0.00184276 Jy ! Component: 1850 - total flux cleaned = 0.00188943 Jy ! Component: 1900 - total flux cleaned = 0.00187775 Jy ! Component: 1950 - total flux cleaned = 0.00191249 Jy ! Component: 2000 - total flux cleaned = 0.00195852 Jy ! Component: 2050 - total flux cleaned = 0.00200428 Jy ! Component: 2100 - total flux cleaned = 0.00194734 Jy ! Component: 2150 - total flux cleaned = 0.00202658 Jy ! Component: 2200 - total flux cleaned = 0.00204907 Jy ! Component: 2250 - total flux cleaned = 0.00210497 Jy ! Component: 2300 - total flux cleaned = 0.00206052 Jy ! Component: 2350 - total flux cleaned = 0.00213813 Jy ! Component: 2400 - total flux cleaned = 0.00218222 Jy ! Component: 2450 - total flux cleaned = 0.00214937 Jy ! Component: 2500 - total flux cleaned = 0.0021712 Jy ! Component: 2550 - total flux cleaned = 0.00216029 Jy ! Component: 2600 - total flux cleaned = 0.0021818 Jy ! Component: 2650 - total flux cleaned = 0.00222477 Jy ! Component: 2700 - total flux cleaned = 0.00218193 Jy ! Component: 2750 - total flux cleaned = 0.00218195 Jy ! Component: 2800 - total flux cleaned = 0.00220307 Jy ! Component: 2850 - total flux cleaned = 0.002182 Jy ! Component: 2900 - total flux cleaned = 0.00217144 Jy ! Component: 2950 - total flux cleaned = 0.0021714 Jy ! Component: 3000 - total flux cleaned = 0.00215056 Jy ! Component: 3050 - total flux cleaned = 0.00218162 Jy ! Component: 3100 - total flux cleaned = 0.00213002 Jy ! Component: 3150 - total flux cleaned = 0.00209916 Jy ! Component: 3200 - total flux cleaned = 0.00211966 Jy ! Component: 3250 - total flux cleaned = 0.00209935 Jy ! Component: 3300 - total flux cleaned = 0.00209932 Jy ! Component: 3350 - total flux cleaned = 0.00206902 Jy ! Component: 3400 - total flux cleaned = 0.00204892 Jy ! Component: 3450 - total flux cleaned = 0.00206899 Jy ! Component: 3500 - total flux cleaned = 0.00204901 Jy ! Component: 3550 - total flux cleaned = 0.00200926 Jy ! Component: 3600 - total flux cleaned = 0.00196966 Jy ! Component: 3650 - total flux cleaned = 0.00198935 Jy ! Component: 3700 - total flux cleaned = 0.00195984 Jy ! Component: 3750 - total flux cleaned = 0.00188151 Jy ! Component: 3800 - total flux cleaned = 0.0018718 Jy ! Component: 3850 - total flux cleaned = 0.00189117 Jy ! Component: 3900 - total flux cleaned = 0.00185245 Jy ! Component: 3950 - total flux cleaned = 0.00182345 Jy ! Component: 4000 - total flux cleaned = 0.00180424 Jy ! Component: 4050 - total flux cleaned = 0.0018138 Jy ! Total flux subtracted in 4096 components = 0.00181375 Jy ! Clean residual min=-0.000524 max=0.000588 Jy/beam ! Clean residual mean=-0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 1.19312 Jy keep ! Adding 339 model components to the UV plane model. ! The established model now contains 499 components and 1.19311 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1127-1857_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8307 x 2.028 at -3.978 degrees (North through East) ! Clean map min=-0.001269 max=1.1094 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1127-1857_X_map.fits wmodel /vlbi/bp222/temp_maps//J1127-1857_X_map.mod ! Writing 499 model components to file: /vlbi/bp222/temp_maps//J1127-1857_X_map.mod wobs /vlbi/bp222/temp_maps//J1127-1857_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1127-1857_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1127-1857_X_map.win ! wwins: Wrote 10 windows to /vlbi/bp222/temp_maps//J1127-1857_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.10939 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000164289 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0444268 0.0444268 0.0888536 0.177707 0.355415 0.710829 1.42166 2.84332 5.68663 11.3733 22.7465 45.4931 90.9861 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.109 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 6752.68 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1127-1857_X_dfm.log closed on Thu Feb 14 22:50:22 2019