! Started logfile: /vlbi/bp222/temp_maps//J1103-3251_X_dfm.log on Thu Feb 14 22:49:34 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1103-3251_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1103-3251_X_uvm.fits ! AN table 1: 77 integrations on 45 of 45 possible baselines. ! AN table 2: 74 integrations on 28 of 28 possible baselines. ! AN table 3: 22 integrations on 10 of 10 possible baselines. ! AN table 4: 23 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.822176 visibilities/baseline/integration-bin. ! Found source: J1103-3251 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 57480 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1103-3251_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 85 telescope corrections were flagged in sub-array 1. ! A total of 92 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.033050Jy sigma=13.048374 ! Fit after self-cal, rms=0.756388Jy sigma=9.292096 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6074 mas, bmaj=1.653 mas, bpa=-2.637 degrees ! Estimated noise=0.601849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.198273 Jy ! Component: 100 - total flux cleaned = 0.2568 Jy ! Total flux subtracted in 100 components = 0.2568 Jy ! Clean residual min=-0.015910 max=0.030335 Jy/beam ! Clean residual mean=-0.000006 rms=0.002426 Jy/beam ! Combined flux in latest and established models = 0.2568 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.2568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097787Jy sigma=1.069658 ! Fit after self-cal, rms=0.097764Jy sigma=1.069328 ! Inverting map ! Added new window around map position (0.8, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203213 Jy ! Component: 100 - total flux cleaned = 0.0238187 Jy ! Total flux subtracted in 100 components = 0.0238187 Jy ! Clean residual min=-0.009469 max=0.021329 Jy/beam ! Clean residual mean=-0.000003 rms=0.001646 Jy/beam ! Combined flux in latest and established models = 0.280618 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.280618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092593Jy sigma=0.974661 ! Fit after self-cal, rms=0.092165Jy sigma=0.966494 ! Inverting map ! Added new window around map position (-1.6, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126345 Jy ! Component: 100 - total flux cleaned = 0.0169406 Jy ! Total flux subtracted in 100 components = 0.0169406 Jy ! Clean residual min=-0.008354 max=0.010494 Jy/beam ! Clean residual mean=-0.000002 rms=0.001272 Jy/beam ! Combined flux in latest and established models = 0.297559 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.297559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089995Jy sigma=0.934132 ! Fit after self-cal, rms=0.089819Jy sigma=0.931474 ! Inverting map ! Added new window around map position (-1, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00614421 Jy ! Component: 100 - total flux cleaned = 0.00770981 Jy ! Total flux subtracted in 100 components = 0.00770981 Jy ! Clean residual min=-0.007312 max=0.006056 Jy/beam ! Clean residual mean=-0.000001 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.305269 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 0.305269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088905Jy sigma=0.919213 ! Fit after self-cal, rms=0.088860Jy sigma=0.918824 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8524 mas, bmaj=2.337 mas, bpa=-7.009 degrees ! Estimated noise=0.250028 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00404636 Jy ! Component: 100 - total flux cleaned = 0.00430539 Jy ! Component: 150 - total flux cleaned = 0.00440828 Jy ! Component: 200 - total flux cleaned = 0.0045862 Jy ! Total flux subtracted in 200 components = 0.0045862 Jy ! Clean residual min=-0.005603 max=0.006249 Jy/beam ! Clean residual mean=0.000002 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.309855 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 42 components and 0.309855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088432Jy sigma=0.914104 ! Fit after self-cal, rms=0.088403Jy sigma=0.913780 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8524 x 2.337 at -7.009 degrees (North through East) ! Clean map min=-0.0051736 max=0.23447 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.10 KP 1.00 ! LA 0.98 MK 1.00 NL 1.08 OV 0.87 ! PT 0.93 SC 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 1.04 HN 1.39 KP 1.05 ! MK 1.01 NL 0.99 OV 1.01 PT 1.16 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 HN 1.02 LA 1.04 NL 1.32 ! PT 1.19 ! ! A total of 63 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* OV 0.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.94 HN 1.13 KP 1.00 ! LA 0.97 MK 0.99 NL 1.08 OV 0.88 ! PT 0.93 SC 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.02 HN 1.38 KP 1.02 ! MK 1.02 NL 0.98 OV 1.06 PT 1.18 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 HN 1.01 LA 1.08 NL 1.34 ! PT 1.15 ! ! A total of 63 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* OV 0.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.95 HN 1.14 KP 1.00 ! LA 0.98 MK 0.98 NL 1.08 OV 0.87 ! PT 0.93 SC 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.03 HN 1.43 KP 1.03 ! MK 1.03 NL 0.97 OV 1.05 PT 1.17 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.04 HN 1.22 LA 0.99 NL 1.38 ! PT 1.16 ! ! A total of 63 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* OV 0.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 1.09 KP 0.99 ! LA 0.97 MK 0.98 NL 1.07 OV 0.87 ! PT 0.93 SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.03 HN 1.37 KP 1.03 ! MK 0.98 NL 0.96 OV 1.03 PT 1.16 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.03 HN 1.09 LA 1.09 NL 1.32 ! PT 1.11 ! ! A total of 63 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* OV 0.00* ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 1.12 KP 1.01 ! LA 0.98 MK 0.99 NL 1.07 OV 0.86 ! PT 0.85 SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.01 HN 1.45 KP 1.04 ! MK 1.03 NL 0.96 OV 1.04 PT 1.16 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.10 HN 1.10 LA 1.05 NL 1.29 ! PT 1.12 ! ! A total of 63 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* OV 0.00* ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 1.18 KP 1.00 ! LA 0.96 MK 0.97 NL 1.05 OV 0.86 ! PT 0.94 SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.02 HN 1.43 KP 1.04 ! MK 1.01 NL 0.95 OV 1.04 PT 1.18 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 HN 1.01 LA 1.07 NL 1.44 ! PT 1.18 ! ! A total of 63 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* OV 0.00* ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 1.10 KP 0.99 ! LA 0.97 MK 0.99 NL 1.06 OV 0.86 ! PT 0.94 SC 1.04 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.01 HN 1.40 KP 1.05 ! MK 1.01 NL 0.95 OV 1.06 PT 1.15 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.04 HN 1.10 LA 1.04 NL 1.27 ! PT 1.16 ! ! A total of 63 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* OV 0.00* ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 1.11 KP 1.00 ! LA 0.97 MK 0.96 NL 1.06 OV 0.86 ! PT 0.93 SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.03 HN 1.29 KP 1.04 ! MK 1.02 NL 0.98 OV 1.03 PT 1.13 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.04 HN 1.07 LA 1.03 NL 1.37 ! PT 1.12 ! ! A total of 63 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* OV 0.00* ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 1.08 KP 0.98 ! LA 0.97 MK 0.98 NL 1.06 OV 0.87 ! PT 0.92 SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 1.02 HN 1.38 KP 1.04 ! MK 1.02 NL 0.96 OV 1.05 PT 1.17 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.05 HN 1.11 LA 1.10 NL 1.23 ! PT 1.06 ! ! A total of 63 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* OV 0.00* ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 1.08 KP 1.00 ! LA 0.96 MK 0.96 NL 1.06 OV 0.86 ! PT 0.92 SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.03 HN 1.38 KP 1.04 ! MK 1.04 NL 0.97 OV 1.03 PT 1.16 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.02 HN 1.09 LA 1.00 NL 1.24 ! PT 1.19 ! ! A total of 63 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* OV 0.00* ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.17 KP 1.00 ! LA 0.96 MK 0.98 NL 1.04 OV 0.87 ! PT 0.92 SC 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.04 HN 1.35 KP 1.05 ! MK 0.98 NL 0.92 OV 1.04 PT 1.15 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 HN 1.10 LA 1.06 NL 1.24 ! PT 1.14 ! ! A total of 63 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* OV 0.00* ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 1.09 KP 0.98 ! LA 0.96 MK 1.00 NL 1.04 OV 0.85 ! PT 0.91 SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.02 HN 1.40 KP 1.02 ! MK 1.05 NL 0.96 OV 1.04 PT 1.14 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.03 HN 1.12 LA 1.05 NL 1.19 ! PT 1.16 ! ! A total of 63 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* OV 0.00* ! ! ! Fit before self-cal, rms=0.088403Jy sigma=0.913780 ! Fit after self-cal, rms=0.092162Jy sigma=0.835195 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8556 mas, bmaj=2.316 mas, bpa=-6.726 degrees ! Estimated noise=0.254206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00259873 Jy ! Component: 100 - total flux cleaned = -0.00317573 Jy ! Component: 150 - total flux cleaned = -0.00365851 Jy ! Component: 200 - total flux cleaned = -0.00390427 Jy ! Total flux subtracted in 200 components = -0.00390427 Jy ! Clean residual min=-0.003687 max=0.003540 Jy/beam ! Clean residual mean=-0.000001 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.305951 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 0.305951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091811Jy sigma=0.831970 ! Fit after self-cal, rms=0.091946Jy sigma=0.831687 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091946Jy sigma=0.831687 ! Fit after self-cal, rms=0.093315Jy sigma=0.829985 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.857 mas, bmaj=2.315 mas, bpa=-6.679 degrees ! Estimated noise=0.254094 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00228756 Jy ! Component: 100 - total flux cleaned = -0.00274 Jy ! Component: 150 - total flux cleaned = -0.00296865 Jy ! Component: 200 - total flux cleaned = -0.00317065 Jy ! Total flux subtracted in 200 components = -0.00317065 Jy ! Clean residual min=-0.003112 max=0.003220 Jy/beam ! Clean residual mean=-0.000001 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.30278 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.30278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093094Jy sigma=0.827867 ! Fit after self-cal, rms=0.093113Jy sigma=0.827791 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000363757 Jy ! Component: 100 - total flux cleaned = -0.000533098 Jy ! Component: 150 - total flux cleaned = -0.000724839 Jy ! Component: 200 - total flux cleaned = -0.000851778 Jy ! Total flux subtracted in 200 components = -0.000851778 Jy ! Clean residual min=-0.003053 max=0.003206 Jy/beam ! Clean residual mean=-0.000001 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.301928 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.301928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093036Jy sigma=0.827069 ! Fit after self-cal, rms=0.093033Jy sigma=0.827003 ! Inverting map ! Added new window around map position (-1.2, -12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309671 Jy ! Component: 100 - total flux cleaned = 0.00360618 Jy ! Component: 150 - total flux cleaned = 0.00370935 Jy ! Component: 200 - total flux cleaned = 0.00371281 Jy ! Total flux subtracted in 200 components = 0.00371281 Jy ! Clean residual min=-0.002989 max=0.002818 Jy/beam ! Clean residual mean=-0.000001 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.305641 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.305641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092909Jy sigma=0.825126 ! Fit after self-cal, rms=0.092886Jy sigma=0.824896 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092886Jy sigma=0.824896 ! Fit after self-cal, rms=0.094690Jy sigma=0.814371 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8579 mas, bmaj=2.316 mas, bpa=-6.687 degrees ! Estimated noise=0.253873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00163605 Jy ! Component: 100 - total flux cleaned = -0.00190159 Jy ! Component: 150 - total flux cleaned = -0.00195042 Jy ! Component: 200 - total flux cleaned = -0.00199347 Jy ! Total flux subtracted in 200 components = -0.00199347 Jy ! Clean residual min=-0.001946 max=0.001601 Jy/beam ! Clean residual mean=-0.000001 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.303648 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 97 components and 0.303648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094607Jy sigma=0.813655 ! Fit after self-cal, rms=0.094660Jy sigma=0.813593 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.77331e-06 Jy ! Component: 100 - total flux cleaned = 5.59756e-06 Jy ! Component: 150 - total flux cleaned = 3.71497e-05 Jy ! Component: 200 - total flux cleaned = 3.7139e-05 Jy ! Total flux subtracted in 200 components = 3.7139e-05 Jy ! Clean residual min=-0.001849 max=0.001566 Jy/beam ! Clean residual mean=-0.000000 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.303685 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 104 components and 0.303685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094631Jy sigma=0.813325 ! Fit after self-cal, rms=0.094630Jy sigma=0.813317 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094630Jy sigma=0.813317 ! Fit after self-cal, rms=0.095516Jy sigma=0.813005 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.335 mas, bmaj=7.023 mas, bpa=1.308 degrees ! Estimated noise=0.301682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000725672 Jy ! Component: 100 - total flux cleaned = -0.000886068 Jy ! Component: 150 - total flux cleaned = -0.000967593 Jy ! Component: 200 - total flux cleaned = -0.00103896 Jy ! Total flux subtracted in 200 components = -0.00103896 Jy ! Clean residual min=-0.002052 max=0.001570 Jy/beam ! Clean residual mean=-0.000000 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.302646 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 113 components and 0.302646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095483Jy sigma=0.812804 ! Fit after self-cal, rms=0.095494Jy sigma=0.812750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.80754e-05 Jy ! Component: 100 - total flux cleaned = 2.65709e-05 Jy ! Component: 150 - total flux cleaned = 1.06673e-05 Jy ! Component: 200 - total flux cleaned = 1.08769e-05 Jy ! Total flux subtracted in 200 components = 1.08769e-05 Jy ! Clean residual min=-0.002036 max=0.001507 Jy/beam ! Clean residual mean=-0.000000 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.302657 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 118 components and 0.302657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095483Jy sigma=0.812710 ! Fit after self-cal, rms=0.095482Jy sigma=0.812691 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8592 mas, bmaj=2.316 mas, bpa=-6.624 degrees ! Estimated noise=0.253875 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8592 x 2.316 at -6.624 degrees (North through East) ! Clean map min=-0.0015766 max=0.24455 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6053 mas, bmaj=1.631 mas, bpa=-1.902 degrees ! Estimated noise=0.603406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200504 Jy ! Component: 100 - total flux cleaned = 0.259515 Jy ! Component: 150 - total flux cleaned = 0.284433 Jy ! Component: 200 - total flux cleaned = 0.289414 Jy ! Total flux subtracted in 200 components = 0.289414 Jy ! Clean residual min=-0.008244 max=0.008185 Jy/beam ! Clean residual mean=-0.000001 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.289414 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.289414 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8592 mas, bmaj=2.316 mas, bpa=-6.624 degrees ! Estimated noise=0.253875 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00749694 Jy ! Component: 100 - total flux cleaned = 0.00905485 Jy ! Component: 150 - total flux cleaned = 0.00990284 Jy ! Component: 200 - total flux cleaned = 0.0107379 Jy ! Total flux subtracted in 200 components = 0.0107379 Jy ! Clean residual min=-0.002530 max=0.002477 Jy/beam ! Clean residual mean=-0.000000 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.300152 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 28 components and 0.300152 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.335 mas, bmaj=7.023 mas, bpa=1.308 degrees ! Estimated noise=0.301682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023993 Jy ! Component: 100 - total flux cleaned = 0.00270198 Jy ! Component: 150 - total flux cleaned = 0.00284181 Jy ! Component: 200 - total flux cleaned = 0.00286658 Jy ! Total flux subtracted in 200 components = 0.00286658 Jy ! Clean residual min=-0.002081 max=0.001533 Jy/beam ! Clean residual mean=-0.000000 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.303018 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.79429e-05 Jy ! Component: 100 - total flux cleaned = 0.000107519 Jy ! Component: 150 - total flux cleaned = 0.000142669 Jy ! Component: 200 - total flux cleaned = 0.000158463 Jy ! Total flux subtracted in 200 components = 0.000158463 Jy ! Clean residual min=-0.002043 max=0.001486 Jy/beam ! Clean residual mean=-0.000000 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.303177 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 45 components and 0.303177 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8592 mas, bmaj=2.316 mas, bpa=-6.624 degrees ! Estimated noise=0.253875 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.68961e-06 Jy ! Component: 100 - total flux cleaned = -0.000147013 Jy ! Component: 150 - total flux cleaned = -0.000280339 Jy ! Component: 200 - total flux cleaned = -0.00034224 Jy ! Total flux subtracted in 200 components = -0.00034224 Jy ! Clean residual min=-0.001844 max=0.001819 Jy/beam ! Clean residual mean=-0.000000 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.302834 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.302834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095599Jy sigma=0.814415 ! Fit after self-cal, rms=0.095572Jy sigma=0.814119 wmodel J1103-3251_X_map.mod ! Writing 53 model components to file: J1103-3251_X_map.mod wobs J1103-3251_X_uvs.fits ! Writing UV FITS file: J1103-3251_X_uvs.fits wwins J1103-3251_X_map.win ! wwins: Wrote 5 windows to J1103-3251_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000605174 Jy ! Component: 100 - total flux cleaned = -0.00112649 Jy ! Component: 150 - total flux cleaned = -0.00164601 Jy ! Component: 200 - total flux cleaned = -0.00216754 Jy ! Component: 250 - total flux cleaned = -0.00269398 Jy ! Component: 300 - total flux cleaned = -0.00322674 Jy ! Component: 350 - total flux cleaned = -0.0036443 Jy ! Component: 400 - total flux cleaned = -0.00397866 Jy ! Component: 450 - total flux cleaned = -0.00425811 Jy ! Component: 500 - total flux cleaned = -0.00441761 Jy ! Component: 550 - total flux cleaned = -0.00461828 Jy ! Component: 600 - total flux cleaned = -0.00474873 Jy ! Component: 650 - total flux cleaned = -0.00477027 Jy ! Component: 700 - total flux cleaned = -0.00491712 Jy ! Component: 750 - total flux cleaned = -0.00502017 Jy ! Component: 800 - total flux cleaned = -0.00510138 Jy ! Component: 850 - total flux cleaned = -0.00518152 Jy ! Component: 900 - total flux cleaned = -0.00531969 Jy ! Component: 950 - total flux cleaned = -0.0053974 Jy ! Component: 1000 - total flux cleaned = -0.00551221 Jy ! Component: 1050 - total flux cleaned = -0.00555019 Jy ! Component: 1100 - total flux cleaned = -0.00562538 Jy ! Component: 1150 - total flux cleaned = -0.00568092 Jy ! Component: 1200 - total flux cleaned = -0.00577217 Jy ! Component: 1250 - total flux cleaned = -0.00584401 Jy ! Component: 1300 - total flux cleaned = -0.0058972 Jy ! Component: 1350 - total flux cleaned = -0.00593261 Jy ! Component: 1400 - total flux cleaned = -0.00601966 Jy ! Component: 1450 - total flux cleaned = -0.00610572 Jy ! Component: 1500 - total flux cleaned = -0.00619071 Jy ! Component: 1550 - total flux cleaned = -0.00627444 Jy ! Component: 1600 - total flux cleaned = -0.00627423 Jy ! Component: 1650 - total flux cleaned = -0.00635682 Jy ! Component: 1700 - total flux cleaned = -0.00643805 Jy ! Component: 1750 - total flux cleaned = -0.00648628 Jy ! Component: 1800 - total flux cleaned = -0.00650223 Jy ! Component: 1850 - total flux cleaned = -0.00651825 Jy ! Component: 1900 - total flux cleaned = -0.00658094 Jy ! Component: 1950 - total flux cleaned = -0.00661213 Jy ! Component: 2000 - total flux cleaned = -0.00667365 Jy ! Component: 2050 - total flux cleaned = -0.00673435 Jy ! Component: 2100 - total flux cleaned = -0.00671951 Jy ! Component: 2150 - total flux cleaned = -0.00680918 Jy ! Component: 2200 - total flux cleaned = -0.0067797 Jy ! Component: 2250 - total flux cleaned = -0.00688236 Jy ! Component: 2300 - total flux cleaned = -0.00689689 Jy ! Component: 2350 - total flux cleaned = -0.00698344 Jy ! Component: 2400 - total flux cleaned = -0.00699771 Jy ! Component: 2450 - total flux cleaned = -0.00701185 Jy ! Component: 2500 - total flux cleaned = -0.00704005 Jy ! Component: 2550 - total flux cleaned = -0.00710957 Jy ! Component: 2600 - total flux cleaned = -0.00710947 Jy ! Component: 2650 - total flux cleaned = -0.00710935 Jy ! Component: 2700 - total flux cleaned = -0.00710931 Jy ! Component: 2750 - total flux cleaned = -0.00712268 Jy ! Component: 2800 - total flux cleaned = -0.00716297 Jy ! Component: 2850 - total flux cleaned = -0.00717625 Jy ! Component: 2900 - total flux cleaned = -0.00718947 Jy ! Component: 2950 - total flux cleaned = -0.00724189 Jy ! Component: 3000 - total flux cleaned = -0.00720277 Jy ! Component: 3050 - total flux cleaned = -0.00721582 Jy ! Component: 3100 - total flux cleaned = -0.00725445 Jy ! Component: 3150 - total flux cleaned = -0.00724169 Jy ! Component: 3200 - total flux cleaned = -0.00726696 Jy ! Component: 3250 - total flux cleaned = -0.00727935 Jy ! Component: 3300 - total flux cleaned = -0.00726698 Jy ! Component: 3350 - total flux cleaned = -0.00726694 Jy ! Component: 3400 - total flux cleaned = -0.00729157 Jy ! Component: 3450 - total flux cleaned = -0.00725499 Jy ! Component: 3500 - total flux cleaned = -0.00734015 Jy ! Component: 3550 - total flux cleaned = -0.0073281 Jy ! Component: 3600 - total flux cleaned = -0.00737598 Jy ! Component: 3650 - total flux cleaned = -0.00737602 Jy ! Component: 3700 - total flux cleaned = -0.00736421 Jy ! Component: 3750 - total flux cleaned = -0.0073525 Jy ! Component: 3800 - total flux cleaned = -0.00735246 Jy ! Component: 3850 - total flux cleaned = -0.00735248 Jy ! Component: 3900 - total flux cleaned = -0.00738714 Jy ! Component: 3950 - total flux cleaned = -0.00742167 Jy ! Component: 4000 - total flux cleaned = -0.00735315 Jy ! Component: 4050 - total flux cleaned = -0.00744414 Jy ! Total flux subtracted in 4096 components = -0.00746674 Jy ! Clean residual min=-0.000689 max=0.000599 Jy/beam ! Clean residual mean=-0.000000 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.295368 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 320 components and 0.295368 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1103-3251_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8592 x 2.316 at -6.624 degrees (North through East) ! Clean map min=-0.0012894 max=0.24443 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1103-3251_X_map.fits wmodel /vlbi/bp222/temp_maps//J1103-3251_X_map.mod ! Writing 320 model components to file: /vlbi/bp222/temp_maps//J1103-3251_X_map.mod wobs /vlbi/bp222/temp_maps//J1103-3251_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1103-3251_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1103-3251_X_map.win ! wwins: Wrote 6 windows to /vlbi/bp222/temp_maps//J1103-3251_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.244432 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000194941 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.239257 0.239257 0.478514 0.957029 1.91406 3.82811 7.65623 15.3125 30.6249 61.2498 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.244 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1253.88 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1103-3251_X_dfm.log closed on Thu Feb 14 22:49:41 2019