! Started logfile: /vlbi/bp222/temp_maps//J1048+6008_X_dfm.log on Thu Feb 14 22:48:38 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1048+6008_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1048+6008_X_uvm.fits ! AN table 1: 117 integrations on 45 of 45 possible baselines. ! AN table 2: 90 integrations on 28 of 28 possible baselines. ! AN table 3: 23 integrations on 36 of 36 possible baselines. ! AN table 4: 23 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.939093 visibilities/baseline/integration-bin. ! Found source: J1048+6008 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 98616 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1048+6008_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.002213Jy sigma=16.105155 ! Fit after self-cal, rms=0.971246Jy sigma=15.576764 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6645 mas, bmaj=1.352 mas, bpa=3.264 degrees ! Estimated noise=0.375069 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222775 Jy ! Component: 100 - total flux cleaned = 0.0278057 Jy ! Total flux subtracted in 100 components = 0.0278057 Jy ! Clean residual min=-0.002247 max=0.002576 Jy/beam ! Clean residual mean=0.000004 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0278057 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0278057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058979Jy sigma=0.890213 ! Fit after self-cal, rms=0.057387Jy sigma=0.864056 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499028 Jy ! Component: 100 - total flux cleaned = 0.00787459 Jy ! Total flux subtracted in 100 components = 0.00787459 Jy ! Clean residual min=-0.002127 max=0.003169 Jy/beam ! Clean residual mean=0.000003 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0356802 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 0.0356803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056734Jy sigma=0.850242 ! Fit after self-cal, rms=0.056699Jy sigma=0.849827 ! Inverting map ! Added new window around map position (10, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337274 Jy ! Component: 100 - total flux cleaned = 0.00578187 Jy ! Total flux subtracted in 100 components = 0.00578187 Jy ! Clean residual min=-0.001988 max=0.002652 Jy/beam ! Clean residual mean=0.000003 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0414621 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.0414621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056357Jy sigma=0.843653 ! Fit after self-cal, rms=0.056264Jy sigma=0.842583 ! Inverting map ! Added new window around map position (1, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313545 Jy ! Component: 100 - total flux cleaned = 0.00539783 Jy ! Total flux subtracted in 100 components = 0.00539783 Jy ! Clean residual min=-0.001998 max=0.002325 Jy/beam ! Clean residual mean=0.000003 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.04686 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.04686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055984Jy sigma=0.837434 ! Fit after self-cal, rms=0.055906Jy sigma=0.836592 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9019 mas, bmaj=1.733 mas, bpa=-1.04 degrees ! Estimated noise=0.146246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039327 Jy ! Component: 100 - total flux cleaned = 0.00665435 Jy ! Component: 150 - total flux cleaned = 0.0086603 Jy ! Component: 200 - total flux cleaned = 0.0102168 Jy ! Total flux subtracted in 200 components = 0.0102168 Jy ! Clean residual min=-0.002222 max=0.002979 Jy/beam ! Clean residual mean=0.000011 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0570768 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 45 components and 0.0570768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055578Jy sigma=0.830234 ! Fit after self-cal, rms=0.055413Jy sigma=0.828400 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9019 x 1.733 at -1.04 degrees (North through East) ! Clean map min=-0.0021823 max=0.033107 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.01 HN 0.94 KP 0.83 ! LA 0.97 MK 1.31 NL 1.40 OV 0.98 ! PT 0.87 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 1.03 KP 0.74 ! MK 1.05 NL 1.17 OV 1.03 PT 0.72 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.92 HN 0.95 KP 1.00 ! LA 0.79 MK 1.01 NL 1.23 OV 0.99 ! PT 1.04 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.84 FD 0.79 HN 0.82 MK 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.00 KP 0.89 ! LA 0.97 MK 1.23 NL 1.38 OV 0.93 ! PT 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 0.97 HN 1.07 KP 0.76 ! MK 1.14 NL 1.07 OV 0.99 PT 0.76 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 1.04 HN 1.10 KP 0.91 ! LA 0.83 MK 1.20 NL 1.07 OV 0.92 ! PT 1.17 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.82 FD 1.04 HN 0.68 MK 0.81 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.04 KP 0.92 ! LA 1.02 MK 1.17 NL 1.32 OV 0.92 ! PT 0.89 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 HN 1.10 KP 0.75 ! MK 1.10 NL 1.01 OV 0.96 PT 0.74 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.89 FD 1.00 HN 1.09 KP 0.89 ! LA 0.86 MK 1.24 NL 1.14 OV 1.05 ! PT 1.18 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.73 FD 0.78 HN 1.02 MK 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 0.95 KP 0.88 ! LA 1.01 MK 1.28 NL 1.41 OV 0.92 ! PT 0.94 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.96 HN 1.04 KP 0.75 ! MK 1.15 NL 1.05 OV 0.98 PT 0.76 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.04 HN 1.27 KP 0.89 ! LA 0.93 MK 1.13 NL 1.21 OV 0.93 ! PT 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.61 FD 0.94 HN 0.88 MK 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.90 KP 0.87 ! LA 1.05 MK 1.28 NL 1.48 OV 0.96 ! PT 0.89 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.95 HN 1.06 KP 0.79 ! MK 1.06 NL 1.06 OV 0.95 PT 0.82 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.88 FD 1.04 HN 1.00 KP 0.95 ! LA 0.99 MK 1.12 NL 1.10 OV 0.79 ! PT 1.05 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 0.85 HN 0.75 MK 0.66 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 0.97 KP 0.93 ! LA 1.12 MK 1.16 NL 1.36 OV 0.94 ! PT 0.85 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.06 HN 1.14 KP 0.82 ! MK 0.94 NL 1.00 OV 0.90 PT 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.99 HN 1.50 KP 0.96 ! LA 1.04 MK 1.22 NL 1.15 OV 0.96 ! PT 1.08 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.77 FD 0.91 HN 0.63 MK 0.93 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 1.01 KP 0.96 ! LA 1.01 MK 1.17 NL 1.39 OV 0.90 ! PT 0.92 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.95 HN 1.00 KP 0.86 ! MK 0.99 NL 0.96 OV 0.97 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.96 HN 1.10 KP 0.90 ! LA 1.14 MK 1.07 NL 1.15 OV 0.87 ! PT 1.13 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 0.68 HN 0.82 MK 0.72 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 0.95 KP 0.99 ! LA 1.01 MK 1.10 NL 1.32 OV 1.00 ! PT 0.95 SC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.94 HN 1.01 KP 0.88 ! MK 0.87 NL 0.94 OV 0.93 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 1.05 HN 1.19 KP 0.99 ! LA 1.04 MK 0.96 NL 1.00 OV 0.83 ! PT 1.12 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.72 FD 0.78 HN 0.83 MK 0.75 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 0.96 KP 0.99 ! LA 1.02 MK 1.02 NL 1.35 OV 0.91 ! PT 0.89 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.94 HN 0.93 KP 0.89 ! MK 0.89 NL 0.94 OV 0.95 PT 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.87 FD 0.94 HN 1.09 KP 1.02 ! LA 1.09 MK 1.05 NL 1.16 OV 0.98 ! PT 0.93 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.73 FD 0.83 HN 0.77 MK 0.74 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.90 HN 0.93 KP 0.98 ! LA 1.03 MK 1.07 NL 1.30 OV 0.95 ! PT 0.94 SC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.98 HN 0.87 KP 0.85 ! MK 0.84 NL 0.90 OV 0.97 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 1.05 HN 0.93 KP 1.03 ! LA 0.95 MK 0.78 NL 1.04 OV 0.97 ! PT 1.13 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.78 FD 0.83 HN 0.83 MK 0.71 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.87 KP 0.97 ! LA 1.05 MK 1.04 NL 1.22 OV 0.93 ! PT 0.90 SC 0.84 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.88 HN 0.88 KP 0.85 ! MK 0.83 NL 0.92 OV 0.98 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.87 FD 1.03 HN 0.90 KP 0.98 ! LA 1.22 MK 0.83 NL 1.14 OV 0.88 ! PT 1.04 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.73 FD 0.73 HN 0.70 MK 0.76 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.88 HN 0.93 KP 1.00 ! LA 1.01 MK 0.95 NL 1.26 OV 0.90 ! PT 0.92 SC 0.83 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.88 HN 0.88 KP 0.90 ! MK 0.70 NL 0.84 OV 0.93 PT 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.94 HN 0.95 KP 0.92 ! LA 1.21 MK 0.87 NL 1.01 OV 0.83 ! PT 1.12 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.74 FD 0.64 HN 0.77 MK 0.68 ! ! ! Fit before self-cal, rms=0.055413Jy sigma=0.828400 ! Fit after self-cal, rms=0.053321Jy sigma=0.821424 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9116 mas, bmaj=1.74 mas, bpa=-0.8047 degrees ! Estimated noise=0.140138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149543 Jy ! Component: 100 - total flux cleaned = 0.00212288 Jy ! Component: 150 - total flux cleaned = 0.00259871 Jy ! Component: 200 - total flux cleaned = 0.0029143 Jy ! Total flux subtracted in 200 components = 0.0029143 Jy ! Clean residual min=-0.002039 max=0.002843 Jy/beam ! Clean residual mean=0.000008 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.0599911 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.0599911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053228Jy sigma=0.820099 ! Fit after self-cal, rms=0.053260Jy sigma=0.818527 ! Inverting map ! Added new window around map position (45.8, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316459 Jy ! Component: 100 - total flux cleaned = 0.00522167 Jy ! Component: 150 - total flux cleaned = 0.00677883 Jy ! Component: 200 - total flux cleaned = 0.00803189 Jy ! Total flux subtracted in 200 components = 0.00803189 Jy ! Clean residual min=-0.001815 max=0.002290 Jy/beam ! Clean residual mean=0.000002 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.068023 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 103 components and 0.068023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053067Jy sigma=0.813469 ! Fit after self-cal, rms=0.052968Jy sigma=0.811918 ! Inverting map ! Added new window around map position (8.4, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246195 Jy ! Component: 100 - total flux cleaned = 0.00414986 Jy ! Component: 150 - total flux cleaned = 0.00529009 Jy ! Component: 200 - total flux cleaned = 0.00608498 Jy ! Total flux subtracted in 200 components = 0.00608498 Jy ! Clean residual min=-0.001796 max=0.002085 Jy/beam ! Clean residual mean=0.000002 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0741079 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 128 components and 0.074108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052822Jy sigma=0.808896 ! Fit after self-cal, rms=0.052738Jy sigma=0.807881 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052738Jy sigma=0.807881 ! Fit after self-cal, rms=0.052857Jy sigma=0.803921 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9139 mas, bmaj=1.724 mas, bpa=0.1306 degrees ! Estimated noise=0.138407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133488 Jy ! Component: 100 - total flux cleaned = 0.0022194 Jy ! Component: 150 - total flux cleaned = 0.00287602 Jy ! Component: 200 - total flux cleaned = 0.00341681 Jy ! Total flux subtracted in 200 components = 0.00341681 Jy ! Clean residual min=-0.001722 max=0.001946 Jy/beam ! Clean residual mean=0.000008 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0775248 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 144 components and 0.0775248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052784Jy sigma=0.802374 ! Fit after self-cal, rms=0.052811Jy sigma=0.801313 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.2, -19.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196577 Jy ! Component: 100 - total flux cleaned = 0.00329509 Jy ! Component: 150 - total flux cleaned = 0.00436241 Jy ! Component: 200 - total flux cleaned = 0.00502848 Jy ! Total flux subtracted in 200 components = 0.00502848 Jy ! Clean residual min=-0.001634 max=0.001844 Jy/beam ! Clean residual mean=0.000007 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.0825532 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 166 components and 0.0825532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052722Jy sigma=0.799192 ! Fit after self-cal, rms=0.052703Jy sigma=0.798773 ! Inverting map ! Added new window around map position (2.6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190242 Jy ! Component: 100 - total flux cleaned = 0.00314023 Jy ! Component: 150 - total flux cleaned = 0.00405583 Jy ! Component: 200 - total flux cleaned = 0.00485857 Jy ! Total flux subtracted in 200 components = 0.00485857 Jy ! Clean residual min=-0.001593 max=0.001730 Jy/beam ! Clean residual mean=0.000006 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0874118 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 186 components and 0.0874118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052619Jy sigma=0.796888 ! Fit after self-cal, rms=0.052610Jy sigma=0.796510 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052610Jy sigma=0.796510 ! Fit after self-cal, rms=0.053680Jy sigma=0.793240 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9108 mas, bmaj=1.72 mas, bpa=0.5707 degrees ! Estimated noise=0.136338 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000780604 Jy ! Component: 100 - total flux cleaned = 0.00160738 Jy ! Component: 150 - total flux cleaned = 0.00225027 Jy ! Component: 200 - total flux cleaned = 0.00280242 Jy ! Total flux subtracted in 200 components = 0.00280242 Jy ! Clean residual min=-0.001606 max=0.001382 Jy/beam ! Clean residual mean=0.000007 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.0902142 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 198 components and 0.0902142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053625Jy sigma=0.792125 ! Fit after self-cal, rms=0.053762Jy sigma=0.791420 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000611558 Jy ! Component: 100 - total flux cleaned = 0.00125389 Jy ! Component: 150 - total flux cleaned = 0.00178547 Jy ! Component: 200 - total flux cleaned = 0.00227826 Jy ! Total flux subtracted in 200 components = 0.00227826 Jy ! Clean residual min=-0.001557 max=0.001411 Jy/beam ! Clean residual mean=0.000007 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.0924925 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 208 components and 0.0924925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053727Jy sigma=0.790797 ! Fit after self-cal, rms=0.053725Jy sigma=0.790681 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053725Jy sigma=0.790681 ! Fit after self-cal, rms=0.053245Jy sigma=0.790361 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.128 mas, bmaj=2.683 mas, bpa=4.24 degrees ! Estimated noise=0.168121 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174191 Jy ! Component: 100 - total flux cleaned = 0.00299465 Jy ! Component: 150 - total flux cleaned = 0.00368524 Jy ! Component: 200 - total flux cleaned = 0.00428697 Jy ! Total flux subtracted in 200 components = 0.00428697 Jy ! Clean residual min=-0.002452 max=0.002664 Jy/beam ! Clean residual mean=0.000013 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.0967795 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 228 components and 0.0967795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053220Jy sigma=0.789750 ! Fit after self-cal, rms=0.053245Jy sigma=0.789366 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000915704 Jy ! Component: 100 - total flux cleaned = 0.00147224 Jy ! Component: 150 - total flux cleaned = 0.00196189 Jy ! Component: 200 - total flux cleaned = 0.00242951 Jy ! Total flux subtracted in 200 components = 0.00242951 Jy ! Clean residual min=-0.002396 max=0.002694 Jy/beam ! Clean residual mean=0.000013 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.099209 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 239 components and 0.099209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053235Jy sigma=0.789151 ! Fit after self-cal, rms=0.053229Jy sigma=0.788980 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9053 mas, bmaj=1.714 mas, bpa=0.6799 degrees ! Estimated noise=0.133896 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9053 x 1.714 at 0.6799 degrees (North through East) ! Clean map min=-0.0014023 max=0.029644 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6631 mas, bmaj=1.333 mas, bpa=5.982 degrees ! Estimated noise=0.335938 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201474 Jy ! Component: 100 - total flux cleaned = 0.028073 Jy ! Component: 150 - total flux cleaned = 0.0339224 Jy ! Component: 200 - total flux cleaned = 0.0386681 Jy ! Total flux subtracted in 200 components = 0.0386681 Jy ! Clean residual min=-0.002265 max=0.002925 Jy/beam ! Clean residual mean=0.000005 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0386681 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0386681 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9053 mas, bmaj=1.714 mas, bpa=0.6799 degrees ! Estimated noise=0.133896 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00646132 Jy ! Component: 100 - total flux cleaned = 0.0116912 Jy ! Component: 150 - total flux cleaned = 0.0161681 Jy ! Component: 200 - total flux cleaned = 0.0200659 Jy ! Total flux subtracted in 200 components = 0.0200659 Jy ! Clean residual min=-0.002065 max=0.002616 Jy/beam ! Clean residual mean=0.000017 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.0587341 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 58 components and 0.0587341 Jy ! Inverting map ! Added new window around map position (-20.4, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347878 Jy ! Component: 100 - total flux cleaned = 0.00657687 Jy ! Component: 150 - total flux cleaned = 0.00937474 Jy ! Component: 200 - total flux cleaned = 0.0119145 Jy ! Total flux subtracted in 200 components = 0.0119145 Jy ! Clean residual min=-0.001854 max=0.001747 Jy/beam ! Clean residual mean=0.000014 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0706485 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 88 components and 0.0706485 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.128 mas, bmaj=2.683 mas, bpa=4.24 degrees ! Estimated noise=0.168121 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00455288 Jy ! Component: 100 - total flux cleaned = 0.00822956 Jy ! Component: 150 - total flux cleaned = 0.0113368 Jy ! Component: 200 - total flux cleaned = 0.0140108 Jy ! Total flux subtracted in 200 components = 0.0140108 Jy ! Clean residual min=-0.002756 max=0.002636 Jy/beam ! Clean residual mean=0.000024 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.0846593 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233415 Jy ! Component: 100 - total flux cleaned = 0.00440201 Jy ! Component: 150 - total flux cleaned = 0.00617339 Jy ! Component: 200 - total flux cleaned = 0.00750653 Jy ! Total flux subtracted in 200 components = 0.00750653 Jy ! Clean residual min=-0.002469 max=0.002296 Jy/beam ! Clean residual mean=0.000018 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0921659 Jy ! Adding 136 model components to the UV plane model. ! The established model now contains 196 components and 0.0921659 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9053 mas, bmaj=1.714 mas, bpa=0.6799 degrees ! Estimated noise=0.133896 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000856784 Jy ! Component: 100 - total flux cleaned = 0.00166671 Jy ! Component: 150 - total flux cleaned = 0.00239567 Jy ! Component: 200 - total flux cleaned = 0.00309781 Jy ! Total flux subtracted in 200 components = 0.00309781 Jy ! Clean residual min=-0.001394 max=0.001319 Jy/beam ! Clean residual mean=0.000007 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.0952637 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 224 components and 0.0952637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053254Jy sigma=0.789783 ! Fit after self-cal, rms=0.053178Jy sigma=0.788594 wmodel J1048+6008_X_map.mod ! Writing 224 model components to file: J1048+6008_X_map.mod wobs J1048+6008_X_uvs.fits ! Writing UV FITS file: J1048+6008_X_uvs.fits wwins J1048+6008_X_map.win ! wwins: Wrote 8 windows to J1048+6008_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168467 Jy ! Component: 100 - total flux cleaned = 0.000352351 Jy ! Component: 150 - total flux cleaned = 0.000459592 Jy ! Component: 200 - total flux cleaned = 0.000562901 Jy ! Component: 250 - total flux cleaned = 0.000662889 Jy ! Component: 300 - total flux cleaned = 0.000681893 Jy ! Component: 350 - total flux cleaned = 0.000681776 Jy ! Component: 400 - total flux cleaned = 0.000681933 Jy ! Component: 450 - total flux cleaned = 0.00071883 Jy ! Component: 500 - total flux cleaned = 0.000737077 Jy ! Component: 550 - total flux cleaned = 0.00075504 Jy ! Component: 600 - total flux cleaned = 0.000772106 Jy ! Component: 650 - total flux cleaned = 0.000720337 Jy ! Component: 700 - total flux cleaned = 0.000720131 Jy ! Component: 750 - total flux cleaned = 0.000570649 Jy ! Component: 800 - total flux cleaned = 0.000554508 Jy ! Component: 850 - total flux cleaned = 0.000457352 Jy ! Component: 900 - total flux cleaned = 0.000425231 Jy ! Component: 950 - total flux cleaned = 0.000330644 Jy ! Component: 1000 - total flux cleaned = 0.000252719 Jy ! Component: 1050 - total flux cleaned = 0.000206573 Jy ! Component: 1100 - total flux cleaned = 0.000191148 Jy ! Component: 1150 - total flux cleaned = 0.000100962 Jy ! Component: 1200 - total flux cleaned = 5.64868e-05 Jy ! Component: 1250 - total flux cleaned = 2.72999e-05 Jy ! Component: 1300 - total flux cleaned = -4.54397e-05 Jy ! Component: 1350 - total flux cleaned = -7.3998e-05 Jy ! Component: 1400 - total flux cleaned = -7.40206e-05 Jy ! Component: 1450 - total flux cleaned = -8.80629e-05 Jy ! Component: 1500 - total flux cleaned = -0.000143625 Jy ! Component: 1550 - total flux cleaned = -0.000157107 Jy ! Component: 1600 - total flux cleaned = -0.000129748 Jy ! Component: 1650 - total flux cleaned = -0.000129646 Jy ! Component: 1700 - total flux cleaned = -0.000129566 Jy ! Component: 1750 - total flux cleaned = -0.000156253 Jy ! Component: 1800 - total flux cleaned = -0.000182452 Jy ! Component: 1850 - total flux cleaned = -0.000143268 Jy ! Component: 1900 - total flux cleaned = -0.000169259 Jy ! Component: 1950 - total flux cleaned = -0.000156294 Jy ! Component: 2000 - total flux cleaned = -9.24808e-05 Jy ! Component: 2050 - total flux cleaned = -0.000130462 Jy ! Component: 2100 - total flux cleaned = -0.000155548 Jy ! Component: 2150 - total flux cleaned = -0.000142982 Jy ! Component: 2200 - total flux cleaned = -9.35472e-05 Jy ! Component: 2250 - total flux cleaned = -0.000105949 Jy ! Component: 2300 - total flux cleaned = -0.000130315 Jy ! Component: 2350 - total flux cleaned = -0.000106046 Jy ! Component: 2400 - total flux cleaned = -0.000106069 Jy ! Component: 2450 - total flux cleaned = -0.000105881 Jy ! Component: 2500 - total flux cleaned = -0.000105839 Jy ! Component: 2550 - total flux cleaned = -9.40311e-05 Jy ! Component: 2600 - total flux cleaned = -0.000105609 Jy ! Component: 2650 - total flux cleaned = -7.09205e-05 Jy ! Component: 2700 - total flux cleaned = -7.09198e-05 Jy ! Component: 2750 - total flux cleaned = -0.000105251 Jy ! Component: 2800 - total flux cleaned = -0.000116336 Jy ! Component: 2850 - total flux cleaned = -0.00010511 Jy ! Component: 2900 - total flux cleaned = -0.000127342 Jy ! Component: 2950 - total flux cleaned = -0.000138353 Jy ! Component: 3000 - total flux cleaned = -0.000149474 Jy ! Component: 3050 - total flux cleaned = -0.000127524 Jy ! Component: 3100 - total flux cleaned = -0.000149315 Jy ! Component: 3150 - total flux cleaned = -0.000116799 Jy ! Component: 3200 - total flux cleaned = -0.000138493 Jy ! Component: 3250 - total flux cleaned = -0.000138327 Jy ! Component: 3300 - total flux cleaned = -0.000138242 Jy ! Component: 3350 - total flux cleaned = -8.52981e-05 Jy ! Component: 3400 - total flux cleaned = -8.53591e-05 Jy ! Component: 3450 - total flux cleaned = -0.000127133 Jy ! Component: 3500 - total flux cleaned = -9.59041e-05 Jy ! Component: 3550 - total flux cleaned = -9.59906e-05 Jy ! Component: 3600 - total flux cleaned = -0.00010628 Jy ! Component: 3650 - total flux cleaned = -6.53649e-05 Jy ! Component: 3700 - total flux cleaned = -8.57908e-05 Jy ! Component: 3750 - total flux cleaned = -0.000106108 Jy ! Component: 3800 - total flux cleaned = -0.000106181 Jy ! Component: 3850 - total flux cleaned = -6.62271e-05 Jy ! Component: 3900 - total flux cleaned = -6.6172e-05 Jy ! Component: 3950 - total flux cleaned = -6.80833e-06 Jy ! Component: 4000 - total flux cleaned = -2.64568e-05 Jy ! Component: 4050 - total flux cleaned = -3.62241e-05 Jy ! Total flux subtracted in 4096 components = -1.66987e-05 Jy ! Clean residual min=-0.000625 max=0.000543 Jy/beam ! Clean residual mean=0.000004 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.095247 Jy keep ! Adding 422 model components to the UV plane model. ! The established model now contains 644 components and 0.095247 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1048+6008_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9053 x 1.714 at 0.6799 degrees (North through East) ! Clean map min=-0.00098937 max=0.02948 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1048+6008_X_map.fits wmodel /vlbi/bp222/temp_maps//J1048+6008_X_map.mod ! Writing 644 model components to file: /vlbi/bp222/temp_maps//J1048+6008_X_map.mod wobs /vlbi/bp222/temp_maps//J1048+6008_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1048+6008_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1048+6008_X_map.win ! wwins: Wrote 9 windows to /vlbi/bp222/temp_maps//J1048+6008_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0294796 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00019153 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.94911 1.94911 3.89822 7.79644 15.5929 31.1858 62.3715 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.029 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 153.916 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1048+6008_X_dfm.log closed on Thu Feb 14 22:48:51 2019