! Started logfile: /vlbi/bp222/temp_maps//J1008-0933_X_dfm.log on Thu Feb 14 22:47:43 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1008-0933_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1008-0933_X_uvm.fits ! AN table 1: 120 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.90537 visibilities/baseline/integration-bin. ! Found source: J1008-0933 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 58668 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1008-0933_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004243Jy sigma=16.827680 ! Fit after self-cal, rms=0.955521Jy sigma=15.968890 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6372 mas, bmaj=1.702 mas, bpa=-1.795 degrees ! Estimated noise=0.360233 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.032602 Jy ! Component: 100 - total flux cleaned = 0.0421532 Jy ! Total flux subtracted in 100 components = 0.0421532 Jy ! Clean residual min=-0.004097 max=0.012794 Jy/beam ! Clean residual mean=-0.000003 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.0421532 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0421532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074072Jy sigma=1.176379 ! Fit after self-cal, rms=0.072509Jy sigma=1.151038 ! Inverting map ! Added new window around map position (0.4, -8.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126697 Jy ! Component: 100 - total flux cleaned = 0.0201273 Jy ! Total flux subtracted in 100 components = 0.0201273 Jy ! Clean residual min=-0.003795 max=0.006741 Jy/beam ! Clean residual mean=-0.000002 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.0622805 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.0622805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069416Jy sigma=1.091713 ! Fit after self-cal, rms=0.068289Jy sigma=1.072434 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109811 Jy ! Component: 100 - total flux cleaned = 0.0175466 Jy ! Total flux subtracted in 100 components = 0.0175466 Jy ! Clean residual min=-0.003805 max=0.007696 Jy/beam ! Clean residual mean=-0.000003 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.0798271 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 36 components and 0.0798271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065735Jy sigma=1.024980 ! Fit after self-cal, rms=0.064655Jy sigma=1.006168 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102255 Jy ! Component: 100 - total flux cleaned = 0.0157306 Jy ! Total flux subtracted in 100 components = 0.0157306 Jy ! Clean residual min=-0.003972 max=0.008468 Jy/beam ! Clean residual mean=-0.000002 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.0955577 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.0955577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062526Jy sigma=0.966698 ! Fit after self-cal, rms=0.061833Jy sigma=0.953470 ! Inverting map ! Added new window around map position (-0.8, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00983901 Jy ! Component: 100 - total flux cleaned = 0.0127581 Jy ! Total flux subtracted in 100 components = 0.0127581 Jy ! Clean residual min=-0.003469 max=0.007861 Jy/beam ! Clean residual mean=-0.000002 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.108316 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.108316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060189Jy sigma=0.923345 ! Fit after self-cal, rms=0.059887Jy sigma=0.917418 ! Inverting map ! Added new window around map position (1, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00714228 Jy ! Component: 100 - total flux cleaned = 0.010924 Jy ! Total flux subtracted in 100 components = 0.010924 Jy ! Clean residual min=-0.003271 max=0.004652 Jy/beam ! Clean residual mean=-0.000002 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.11924 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.11924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058362Jy sigma=0.888918 ! Fit after self-cal, rms=0.058231Jy sigma=0.886097 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00291989 Jy ! Component: 100 - total flux cleaned = 0.00547233 Jy ! Total flux subtracted in 100 components = 0.00547233 Jy ! Clean residual min=-0.002756 max=0.004465 Jy/beam ! Clean residual mean=-0.000002 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.124712 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.124712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057603Jy sigma=0.875101 ! Fit after self-cal, rms=0.057567Jy sigma=0.874058 ! Inverting map ! Added new window around map position (0.6, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262808 Jy ! Component: 100 - total flux cleaned = 0.00408885 Jy ! Total flux subtracted in 100 components = 0.00408885 Jy ! Clean residual min=-0.002690 max=0.003231 Jy/beam ! Clean residual mean=-0.000001 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.128801 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 66 components and 0.128801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057145Jy sigma=0.866523 ! Fit after self-cal, rms=0.057123Jy sigma=0.865962 ! Inverting map ! Added new window around map position (0, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199936 Jy ! Component: 100 - total flux cleaned = 0.0036265 Jy ! Total flux subtracted in 100 components = 0.0036265 Jy ! Clean residual min=-0.002385 max=0.002800 Jy/beam ! Clean residual mean=-0.000001 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.132428 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 0.132428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056790Jy sigma=0.859421 ! Fit after self-cal, rms=0.056788Jy sigma=0.859203 ! Inverting map ! Added new window around map position (-0.2, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161719 Jy ! Component: 100 - total flux cleaned = 0.00323636 Jy ! Total flux subtracted in 100 components = 0.00323636 Jy ! Clean residual min=-0.002189 max=0.002334 Jy/beam ! Clean residual mean=-0.000001 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.135664 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.135664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056546Jy sigma=0.854582 ! Fit after self-cal, rms=0.056549Jy sigma=0.854414 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8464 mas, bmaj=2.075 mas, bpa=-0.9491 degrees ! Estimated noise=0.180935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426664 Jy ! Component: 100 - total flux cleaned = 0.00717714 Jy ! Component: 150 - total flux cleaned = 0.00867602 Jy ! Component: 200 - total flux cleaned = 0.00981677 Jy ! Total flux subtracted in 200 components = 0.00981677 Jy ! Clean residual min=-0.001674 max=0.001740 Jy/beam ! Clean residual mean=-0.000002 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.145481 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 110 components and 0.145481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056162Jy sigma=0.846227 ! Fit after self-cal, rms=0.056160Jy sigma=0.845849 ! Inverting map ! Added new window around map position (2.4, 16.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147526 Jy ! Component: 100 - total flux cleaned = 0.00219859 Jy ! Component: 150 - total flux cleaned = 0.00273444 Jy ! Component: 200 - total flux cleaned = 0.00317004 Jy ! Total flux subtracted in 200 components = 0.00317004 Jy ! Clean residual min=-0.001486 max=0.001367 Jy/beam ! Clean residual mean=-0.000002 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.148651 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 118 components and 0.148651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056043Jy sigma=0.843815 ! Fit after self-cal, rms=0.056046Jy sigma=0.843704 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8464 x 2.075 at -0.9491 degrees (North through East) ! Clean map min=-0.0013898 max=0.043832 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.90 KP 1.01 ! LA 0.98 MK 0.98 NL 1.02 OV 0.99 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.94 KP 0.99 ! LA 0.98 MK 1.01 NL 1.00 OV 0.95 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.94 KP 1.00 ! LA 0.96 MK 1.01 NL 1.03 OV 0.99 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.92 KP 1.01 ! LA 0.95 MK 1.00 NL 1.04 OV 1.00 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.89 KP 0.98 ! LA 0.99 MK 1.06 NL 1.04 OV 0.98 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.94 KP 1.00 ! LA 0.98 MK 1.01 NL 1.06 OV 1.00 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.95 KP 0.98 ! LA 0.96 MK 0.98 NL 1.03 OV 1.01 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.92 KP 1.00 ! LA 0.99 MK 0.97 NL 1.02 OV 1.03 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.05 HN 0.95 KP 1.01 ! LA 0.97 MK 0.92 NL 0.99 OV 1.03 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.89 KP 1.00 ! LA 0.98 MK 1.03 NL 1.04 OV 0.98 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.97 KP 1.00 ! LA 1.00 MK 0.92 NL 1.01 OV 1.01 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 0.94 KP 0.99 ! LA 1.01 MK 1.04 NL 1.02 OV 0.98 ! PT 0.97 SC 0.98 ! ! ! Fit before self-cal, rms=0.056046Jy sigma=0.843704 ! Fit after self-cal, rms=0.054474Jy sigma=0.842466 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.843 mas, bmaj=2.074 mas, bpa=-0.9801 degrees ! Estimated noise=0.17832 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000590262 Jy ! Component: 100 - total flux cleaned = -0.000275827 Jy ! Component: 150 - total flux cleaned = -0.000112088 Jy ! Component: 200 - total flux cleaned = 1.19848e-06 Jy ! Total flux subtracted in 200 components = 1.19848e-06 Jy ! Clean residual min=-0.001211 max=0.001210 Jy/beam ! Clean residual mean=-0.000001 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.148652 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 130 components and 0.148652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054404Jy sigma=0.841405 ! Fit after self-cal, rms=0.054398Jy sigma=0.841317 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054398Jy sigma=0.841317 ! Fit after self-cal, rms=0.054134Jy sigma=0.838650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8412 mas, bmaj=2.073 mas, bpa=-0.9113 degrees ! Estimated noise=0.177447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000370859 Jy ! Component: 100 - total flux cleaned = -0.000370596 Jy ! Component: 150 - total flux cleaned = -0.000340356 Jy ! Component: 200 - total flux cleaned = -0.000283622 Jy ! Total flux subtracted in 200 components = -0.000283622 Jy ! Clean residual min=-0.001084 max=0.000940 Jy/beam ! Clean residual mean=-0.000000 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.148368 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 137 components and 0.148368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054096Jy sigma=0.838081 ! Fit after self-cal, rms=0.054110Jy sigma=0.837985 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.87191e-06 Jy ! Component: 100 - total flux cleaned = 2.26132e-05 Jy ! Component: 150 - total flux cleaned = 4.87411e-05 Jy ! Component: 200 - total flux cleaned = 9.69692e-05 Jy ! Total flux subtracted in 200 components = 9.69692e-05 Jy ! Clean residual min=-0.001007 max=0.000940 Jy/beam ! Clean residual mean=-0.000000 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.148465 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 142 components and 0.148465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054086Jy sigma=0.837637 ! Fit after self-cal, rms=0.054088Jy sigma=0.837622 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054088Jy sigma=0.837622 ! Fit after self-cal, rms=0.053754Jy sigma=0.835721 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8411 mas, bmaj=2.072 mas, bpa=-0.7527 degrees ! Estimated noise=0.176869 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000347605 Jy ! Component: 100 - total flux cleaned = -0.000346966 Jy ! Component: 150 - total flux cleaned = -0.000301497 Jy ! Component: 200 - total flux cleaned = -0.000301458 Jy ! Total flux subtracted in 200 components = -0.000301458 Jy ! Clean residual min=-0.000962 max=0.000853 Jy/beam ! Clean residual mean=-0.000001 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.148164 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 149 components and 0.148164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053733Jy sigma=0.835418 ! Fit after self-cal, rms=0.053742Jy sigma=0.835343 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.58661e-05 Jy ! Component: 100 - total flux cleaned = -6.70994e-05 Jy ! Component: 150 - total flux cleaned = -0.000106811 Jy ! Component: 200 - total flux cleaned = -0.00010671 Jy ! Total flux subtracted in 200 components = -0.00010671 Jy ! Clean residual min=-0.000947 max=0.000813 Jy/beam ! Clean residual mean=-0.000000 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.148057 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 156 components and 0.148057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053727Jy sigma=0.835136 ! Fit after self-cal, rms=0.053728Jy sigma=0.835124 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053728Jy sigma=0.835124 ! Fit after self-cal, rms=0.053580Jy sigma=0.835094 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.118 mas, bmaj=3.775 mas, bpa=0.5855 degrees ! Estimated noise=0.22538 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.70395e-06 Jy ! Component: 100 - total flux cleaned = -8.36273e-05 Jy ! Component: 150 - total flux cleaned = -0.000143672 Jy ! Component: 200 - total flux cleaned = -0.000169633 Jy ! Total flux subtracted in 200 components = -0.000169633 Jy ! Clean residual min=-0.000638 max=0.000803 Jy/beam ! Clean residual mean=-0.000001 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.147888 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 166 components and 0.147887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053576Jy sigma=0.835026 ! Fit after self-cal, rms=0.053575Jy sigma=0.835005 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.40893e-05 Jy ! Component: 100 - total flux cleaned = -0.000118116 Jy ! Component: 150 - total flux cleaned = -0.000153608 Jy ! Component: 200 - total flux cleaned = -0.000174521 Jy ! Total flux subtracted in 200 components = -0.000174521 Jy ! Clean residual min=-0.000623 max=0.000807 Jy/beam ! Clean residual mean=-0.000001 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.147713 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 170 components and 0.147713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053573Jy sigma=0.834994 ! Fit after self-cal, rms=0.053573Jy sigma=0.834974 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8415 mas, bmaj=2.07 mas, bpa=-0.5598 degrees ! Estimated noise=0.176532 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8415 x 2.07 at -0.5598 degrees (North through East) ! Clean map min=-0.00077291 max=0.043169 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6354 mas, bmaj=1.705 mas, bpa=-1.37 degrees ! Estimated noise=0.350666 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0372822 Jy ! Component: 100 - total flux cleaned = 0.0565 Jy ! Component: 150 - total flux cleaned = 0.0704724 Jy ! Component: 200 - total flux cleaned = 0.0812072 Jy ! Total flux subtracted in 200 components = 0.0812072 Jy ! Clean residual min=-0.003091 max=0.006350 Jy/beam ! Clean residual mean=-0.000003 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.0812072 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.0812072 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8415 mas, bmaj=2.07 mas, bpa=-0.5598 degrees ! Estimated noise=0.176532 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158892 Jy ! Component: 100 - total flux cleaned = 0.0260349 Jy ! Component: 150 - total flux cleaned = 0.0336147 Jy ! Component: 200 - total flux cleaned = 0.0394746 Jy ! Total flux subtracted in 200 components = 0.0394746 Jy ! Clean residual min=-0.001929 max=0.003992 Jy/beam ! Clean residual mean=-0.000004 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.120682 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 103 components and 0.120682 Jy ! Inverting map ! Added new window around map position (0.8, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00477512 Jy ! Component: 100 - total flux cleaned = 0.00856295 Jy ! Component: 150 - total flux cleaned = 0.0116343 Jy ! Component: 200 - total flux cleaned = 0.0141479 Jy ! Total flux subtracted in 200 components = 0.0141479 Jy ! Clean residual min=-0.001210 max=0.001695 Jy/beam ! Clean residual mean=-0.000002 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.13483 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 128 components and 0.13483 Jy ! Inverting map ! Added new window around map position (-0.2, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021076 Jy ! Component: 100 - total flux cleaned = 0.00384265 Jy ! Component: 150 - total flux cleaned = 0.00528904 Jy ! Component: 200 - total flux cleaned = 0.00651417 Jy ! Total flux subtracted in 200 components = 0.00651417 Jy ! Clean residual min=-0.000931 max=0.000899 Jy/beam ! Clean residual mean=-0.000001 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.141344 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 157 components and 0.141344 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.118 mas, bmaj=3.775 mas, bpa=0.5855 degrees ! Estimated noise=0.22538 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016775 Jy ! Component: 100 - total flux cleaned = 0.0028092 Jy ! Component: 150 - total flux cleaned = 0.00366688 Jy ! Component: 200 - total flux cleaned = 0.00421689 Jy ! Total flux subtracted in 200 components = 0.00421689 Jy ! Clean residual min=-0.000892 max=0.000875 Jy/beam ! Clean residual mean=-0.000002 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.145561 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342969 Jy ! Component: 100 - total flux cleaned = 0.000578653 Jy ! Component: 150 - total flux cleaned = 0.000783792 Jy ! Component: 200 - total flux cleaned = 0.000949096 Jy ! Total flux subtracted in 200 components = 0.000949096 Jy ! Clean residual min=-0.000813 max=0.000814 Jy/beam ! Clean residual mean=-0.000001 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.14651 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 214 components and 0.14651 Jy ! Inverting map ! Added new window around map position (-3.2, 27.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241041 Jy ! Component: 100 - total flux cleaned = 0.000251811 Jy ! Component: 150 - total flux cleaned = 0.000376575 Jy ! Component: 200 - total flux cleaned = 0.000501541 Jy ! Total flux subtracted in 200 components = 0.000501541 Jy ! Clean residual min=-0.000648 max=0.000634 Jy/beam ! Clean residual mean=-0.000001 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.147012 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 245 components and 0.147012 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8415 mas, bmaj=2.07 mas, bpa=-0.5598 degrees ! Estimated noise=0.176532 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119497 Jy ! Component: 100 - total flux cleaned = -0.000185607 Jy ! Component: 150 - total flux cleaned = -0.000204566 Jy ! Component: 200 - total flux cleaned = -0.000204357 Jy ! Total flux subtracted in 200 components = -0.000204357 Jy ! Clean residual min=-0.000750 max=0.000643 Jy/beam ! Clean residual mean=-0.000001 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.146807 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 274 components and 0.146807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053488Jy sigma=0.833808 ! Fit after self-cal, rms=0.053466Jy sigma=0.833369 wmodel J1008-0933_X_map.mod ! Writing 274 model components to file: J1008-0933_X_map.mod wobs J1008-0933_X_uvs.fits ! Writing UV FITS file: J1008-0933_X_uvs.fits wwins J1008-0933_X_map.win ! wwins: Wrote 11 windows to J1008-0933_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160595 Jy ! Component: 100 - total flux cleaned = -0.000138325 Jy ! Component: 150 - total flux cleaned = -0.000171292 Jy ! Component: 200 - total flux cleaned = -0.000245348 Jy ! Component: 250 - total flux cleaned = -0.000255356 Jy ! Component: 300 - total flux cleaned = -0.000195499 Jy ! Component: 350 - total flux cleaned = -0.000166369 Jy ! Component: 400 - total flux cleaned = -9.92812e-05 Jy ! Component: 450 - total flux cleaned = -4.28246e-05 Jy ! Component: 500 - total flux cleaned = 2.21215e-05 Jy ! Component: 550 - total flux cleaned = 8.61298e-05 Jy ! Component: 600 - total flux cleaned = 0.000176008 Jy ! Component: 650 - total flux cleaned = 0.000238026 Jy ! Component: 700 - total flux cleaned = 0.000325615 Jy ! Component: 750 - total flux cleaned = 0.000386174 Jy ! Component: 800 - total flux cleaned = 0.000446039 Jy ! Component: 850 - total flux cleaned = 0.000513695 Jy ! Component: 900 - total flux cleaned = 0.000538781 Jy ! Component: 950 - total flux cleaned = 0.000580272 Jy ! Component: 1000 - total flux cleaned = 0.000645988 Jy ! Component: 1050 - total flux cleaned = 0.00067041 Jy ! Component: 1100 - total flux cleaned = 0.000734878 Jy ! Component: 1150 - total flux cleaned = 0.000750818 Jy ! Component: 1200 - total flux cleaned = 0.000790496 Jy ! Component: 1250 - total flux cleaned = 0.00082978 Jy ! Component: 1300 - total flux cleaned = 0.000845405 Jy ! Component: 1350 - total flux cleaned = 0.00089956 Jy ! Component: 1400 - total flux cleaned = 0.000922557 Jy ! Component: 1450 - total flux cleaned = 0.000960597 Jy ! Component: 1500 - total flux cleaned = 0.000953038 Jy ! Component: 1550 - total flux cleaned = 0.000998095 Jy ! Component: 1600 - total flux cleaned = 0.000983195 Jy ! Component: 1650 - total flux cleaned = 0.0010498 Jy ! Component: 1700 - total flux cleaned = 0.00103507 Jy ! Component: 1750 - total flux cleaned = 0.00107166 Jy ! Component: 1800 - total flux cleaned = 0.00111521 Jy ! Component: 1850 - total flux cleaned = 0.00109349 Jy ! Component: 1900 - total flux cleaned = 0.00105769 Jy ! Component: 1950 - total flux cleaned = 0.00112186 Jy ! Component: 2000 - total flux cleaned = 0.00110053 Jy ! Component: 2050 - total flux cleaned = 0.00112866 Jy ! Component: 2100 - total flux cleaned = 0.00113573 Jy ! Component: 2150 - total flux cleaned = 0.00114266 Jy ! Component: 2200 - total flux cleaned = 0.00114264 Jy ! Component: 2250 - total flux cleaned = 0.00114956 Jy ! Component: 2300 - total flux cleaned = 0.00115642 Jy ! Component: 2350 - total flux cleaned = 0.00118378 Jy ! Component: 2400 - total flux cleaned = 0.00119055 Jy ! Component: 2450 - total flux cleaned = 0.00121082 Jy ! Component: 2500 - total flux cleaned = 0.00122431 Jy ! Component: 2550 - total flux cleaned = 0.00122429 Jy ! Component: 2600 - total flux cleaned = 0.00125094 Jy ! Component: 2650 - total flux cleaned = 0.00127073 Jy ! Component: 2700 - total flux cleaned = 0.00130362 Jy ! Component: 2750 - total flux cleaned = 0.00129704 Jy ! Component: 2800 - total flux cleaned = 0.00127097 Jy ! Component: 2850 - total flux cleaned = 0.00129044 Jy ! Component: 2900 - total flux cleaned = 0.0013033 Jy ! Component: 2950 - total flux cleaned = 0.00132899 Jy ! Component: 3000 - total flux cleaned = 0.00130344 Jy ! Component: 3050 - total flux cleaned = 0.00134793 Jy ! Component: 3100 - total flux cleaned = 0.00133532 Jy ! Component: 3150 - total flux cleaned = 0.00137949 Jy ! Component: 3200 - total flux cleaned = 0.00139828 Jy ! Component: 3250 - total flux cleaned = 0.00141081 Jy ! Component: 3300 - total flux cleaned = 0.00141703 Jy ! Component: 3350 - total flux cleaned = 0.00144179 Jy ! Component: 3400 - total flux cleaned = 0.00148494 Jy ! Component: 3450 - total flux cleaned = 0.00147876 Jy ! Component: 3500 - total flux cleaned = 0.00151545 Jy ! Component: 3550 - total flux cleaned = 0.00153372 Jy ! Component: 3600 - total flux cleaned = 0.00152769 Jy ! Component: 3650 - total flux cleaned = 0.00156392 Jy ! Component: 3700 - total flux cleaned = 0.00159396 Jy ! Component: 3750 - total flux cleaned = 0.00159394 Jy ! Component: 3800 - total flux cleaned = 0.00161781 Jy ! Component: 3850 - total flux cleaned = 0.00161184 Jy ! Component: 3900 - total flux cleaned = 0.00163551 Jy ! Component: 3950 - total flux cleaned = 0.00164729 Jy ! Component: 4000 - total flux cleaned = 0.00165318 Jy ! Component: 4050 - total flux cleaned = 0.00165897 Jy ! Total flux subtracted in 4096 components = 0.00168227 Jy ! Clean residual min=-0.000326 max=0.000384 Jy/beam ! Clean residual mean=-0.000000 rms=0.000102 Jy/beam ! Combined flux in latest and established models = 0.148489 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 584 components and 0.148489 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1008-0933_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8415 x 2.07 at -0.5598 degrees (North through East) ! Clean map min=-0.00057798 max=0.04359 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1008-0933_X_map.fits wmodel /vlbi/bp222/temp_maps//J1008-0933_X_map.mod ! Writing 584 model components to file: /vlbi/bp222/temp_maps//J1008-0933_X_map.mod wobs /vlbi/bp222/temp_maps//J1008-0933_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1008-0933_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1008-0933_X_map.win ! wwins: Wrote 12 windows to /vlbi/bp222/temp_maps//J1008-0933_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0435897 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000101492 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.698502 0.698502 1.397 2.79401 5.58802 11.176 22.3521 44.7041 89.4082 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.043 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 429.49 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1008-0933_X_dfm.log closed on Thu Feb 14 22:47:52 2019