! Started logfile: J1007-3333_S_dfm.log on Fri Feb 15 19:50:27 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J1007-3333_S_uvm.fits
! Reading UV FITS file: J1007-3333_S_uvm.fits
! AN table 1: 44 integrations on 28 of 28 possible baselines.
! AN table 2: 70 integrations on 45 of 45 possible baselines.
! AN table 3: 67 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.927133 visibilities/baseline/integration-bin.
! Found source: J1007-3333
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 23208 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1007-3333_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 29 telescope corrections were flagged in sub-array 2.
!  A total of 27 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 29 telescope corrections were flagged in sub-array 2.
!  A total of 27 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 29 telescope corrections were flagged in sub-array 2.
!  A total of 27 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 352 telescope corrections were flagged in sub-array 1.
!  A total of 700 telescope corrections were flagged in sub-array 2.
!  A total of 536 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.064989Jy  sigma=9.460670
! Fit after  self-cal, rms=0.651813Jy  sigma=5.352943
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.493 mas, bmaj=7.614 mas, bpa=-5.804 degrees
! Estimated noise=1.09944 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.292051 Jy
! Component: 100  -  total flux cleaned = 0.357059 Jy
! Total flux subtracted in 100 components = 0.357059 Jy
! Clean residual min=-0.014555 max=0.032504 Jy/beam
! Clean residual mean=-0.000209 rms=0.004270 Jy/beam
! Combined flux in latest and established models = 0.357059 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.357059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.158226Jy  sigma=1.185986
! Fit after  self-cal, rms=0.158181Jy  sigma=1.185857
! Inverting map 
! Added new window around map position (4.5, -7.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0326737 Jy
! Component: 100  -  total flux cleaned = 0.0526024 Jy
! Total flux subtracted in 100 components = 0.0526024 Jy
! Clean residual min=-0.014193 max=0.029659 Jy/beam
! Clean residual mean=-0.000173 rms=0.003587 Jy/beam
! Combined flux in latest and established models = 0.409661 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 0.409661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.149828Jy  sigma=1.059582
! Fit after  self-cal, rms=0.149074Jy  sigma=1.047582
! Inverting map 
! Added new window around map position (-6.5, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0243374 Jy
! Component: 100  -  total flux cleaned = 0.0407069 Jy
! Total flux subtracted in 100 components = 0.0407069 Jy
! Clean residual min=-0.012129 max=0.013726 Jy/beam
! Clean residual mean=-0.000144 rms=0.003080 Jy/beam
! Combined flux in latest and established models = 0.450368 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 28 components and 0.450368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.143911Jy  sigma=0.977636
! Fit after  self-cal, rms=0.143846Jy  sigma=0.977056
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.253 mas, bmaj=10.14 mas, bpa=-10.56 degrees
! Estimated noise=0.660763 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0198789 Jy
! Component: 100  -  total flux cleaned = 0.0314783 Jy
! Component: 150  -  total flux cleaned = 0.0382433 Jy
! Component: 200  -  total flux cleaned = 0.0396788 Jy
! Total flux subtracted in 200 components = 0.0396788 Jy
! Clean residual min=-0.011585 max=0.015563 Jy/beam
! Clean residual mean=-0.000168 rms=0.003293 Jy/beam
! Combined flux in latest and established models = 0.490047 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 52 components and 0.490047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.141266Jy  sigma=0.940097
! Fit after  self-cal, rms=0.141140Jy  sigma=0.938834
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.253 x 10.14 at -10.56 degrees (North through East)
! Clean map  min=-0.011133  max=0.35964 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.11     KP        0.97     LA        0.94     
!   NL        1.07     OV        0.95     PT        0.96     SC        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.65     FD        0.98     HN        1.20     KP        0.97     
!   LA        0.95     MK        0.99     NL        1.06     OV        0.88     
!   PT        1.02     SC        1.07     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.03     FD        0.93     HN        1.36     KP        1.00     
!   MK        1.00     NL        1.03     OV        0.89     PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     HN        1.15     KP        0.97     LA        0.98     
!   NL        1.11     OV        0.95     PT        0.98     SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        4.59     FD        0.99     HN        1.24     KP        0.96     
!   LA        0.86     MK        1.01     NL        1.06     OV        0.90     
!   PT        1.00     SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.45     FD        0.92     HN        1.38     KP        1.01     
!   MK        1.01     NL        1.19     OV        0.90     PT        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.16     KP        0.96     LA        1.00     
!   NL        1.07     OV        0.93     PT        0.97     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.73     FD        0.99     HN        1.25     KP        0.97     
!   LA        0.83     MK        1.02     NL        1.06     OV        0.90     
!   PT        1.01     SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.18     FD        0.96     HN        1.36     KP        0.99     
!   MK        1.01     NL        0.99     OV        0.88     PT        1.03     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.141140Jy  sigma=0.938834
! Fit after  self-cal, rms=0.209484Jy  sigma=0.789687
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.289 mas, bmaj=10.23 mas, bpa=-10.57 degrees
! Estimated noise=0.676628 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00985101 Jy
! Component: 100  -  total flux cleaned = -0.0119555 Jy
! Component: 150  -  total flux cleaned = -0.0129992 Jy
! Component: 200  -  total flux cleaned = -0.0137057 Jy
! Total flux subtracted in 200 components = -0.0137057 Jy
! Clean residual min=-0.007182 max=0.006925 Jy/beam
! Clean residual mean=-0.000058 rms=0.001771 Jy/beam
! Combined flux in latest and established models = 0.476341 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 75 components and 0.476341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.208695Jy  sigma=0.778930
! Fit after  self-cal, rms=0.209234Jy  sigma=0.778398
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.209234Jy  sigma=0.778398
! Fit after  self-cal, rms=0.216448Jy  sigma=0.758694
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.294 mas, bmaj=10.22 mas, bpa=-10.58 degrees
! Estimated noise=0.678307 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00609429 Jy
! Component: 100  -  total flux cleaned = -0.0071241 Jy
! Component: 150  -  total flux cleaned = -0.00783201 Jy
! Component: 200  -  total flux cleaned = -0.00843845 Jy
! Total flux subtracted in 200 components = -0.00843845 Jy
! Clean residual min=-0.005912 max=0.005323 Jy/beam
! Clean residual mean=-0.000041 rms=0.001374 Jy/beam
! Combined flux in latest and established models = 0.467903 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 89 components and 0.467903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.215993Jy  sigma=0.752064
! Fit after  self-cal, rms=0.216015Jy  sigma=0.751929
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000623998 Jy
! Component: 100  -  total flux cleaned = -0.00108613 Jy
! Component: 150  -  total flux cleaned = -0.00159359 Jy
! Component: 200  -  total flux cleaned = -0.00186565 Jy
! Total flux subtracted in 200 components = -0.00186565 Jy
! Clean residual min=-0.005866 max=0.005280 Jy/beam
! Clean residual mean=-0.000046 rms=0.001331 Jy/beam
! Combined flux in latest and established models = 0.466037 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 100 components and 0.466037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.215895Jy  sigma=0.749784
! Fit after  self-cal, rms=0.215880Jy  sigma=0.749689
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.215880Jy  sigma=0.749689
! Fit after  self-cal, rms=0.236217Jy  sigma=0.722513
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.299 mas, bmaj=10.21 mas, bpa=-10.63 degrees
! Estimated noise=0.677531 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00481049 Jy
! Component: 100  -  total flux cleaned = -0.00647359 Jy
! Component: 150  -  total flux cleaned = -0.00703965 Jy
! Component: 200  -  total flux cleaned = -0.00752885 Jy
! Total flux subtracted in 200 components = -0.00752885 Jy
! Clean residual min=-0.003614 max=0.003638 Jy/beam
! Clean residual mean=-0.000037 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.458508 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 113 components and 0.458508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.236004Jy  sigma=0.720277
! Fit after  self-cal, rms=0.236068Jy  sigma=0.720131
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000374457 Jy
! Component: 100  -  total flux cleaned = -0.000710609 Jy
! Component: 150  -  total flux cleaned = -0.00100667 Jy
! Component: 200  -  total flux cleaned = -0.00111373 Jy
! Total flux subtracted in 200 components = -0.00111373 Jy
! Clean residual min=-0.003546 max=0.003569 Jy/beam
! Clean residual mean=-0.000040 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.457395 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 118 components and 0.457395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.236014Jy  sigma=0.719519
! Fit after  self-cal, rms=0.236002Jy  sigma=0.719456
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.236002Jy  sigma=0.719456
! Fit after  self-cal, rms=0.240695Jy  sigma=0.718226
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.086 mas, bmaj=24.78 mas, bpa=-4.346 degrees
! Estimated noise=0.819149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00357835 Jy
! Component: 100  -  total flux cleaned = -0.00402831 Jy
! Component: 150  -  total flux cleaned = -0.00432567 Jy
! Component: 200  -  total flux cleaned = -0.00463583 Jy
! Total flux subtracted in 200 components = -0.00463583 Jy
! Clean residual min=-0.003622 max=0.003751 Jy/beam
! Clean residual mean=-0.000057 rms=0.000961 Jy/beam
! Combined flux in latest and established models = 0.452759 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 129 components and 0.452759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.240599Jy  sigma=0.717686
! Fit after  self-cal, rms=0.240618Jy  sigma=0.717356
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.5, 39.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00334146 Jy
! Component: 100  -  total flux cleaned = 0.00354879 Jy
! Component: 150  -  total flux cleaned = 0.00347892 Jy
! Component: 200  -  total flux cleaned = 0.00327683 Jy
! Total flux subtracted in 200 components = 0.00327683 Jy
! Clean residual min=-0.003115 max=0.002938 Jy/beam
! Clean residual mean=-0.000042 rms=0.000852 Jy/beam
! Combined flux in latest and established models = 0.456036 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 157 components and 0.456036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.240545Jy  sigma=0.716462
! Fit after  self-cal, rms=0.240547Jy  sigma=0.716267
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.3 mas, bmaj=10.22 mas, bpa=-10.63 degrees
! Estimated noise=0.676821 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.3 x 10.22 at -10.63 degrees (North through East)
! Clean map  min=-0.0027741  max=0.37422 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.51 mas, bmaj=7.613 mas, bpa=-5.671 degrees
! Estimated noise=1.12691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.299125 Jy
! Component: 100  -  total flux cleaned = 0.365359 Jy
! Component: 150  -  total flux cleaned = 0.39109 Jy
! Component: 200  -  total flux cleaned = 0.407263 Jy
! Total flux subtracted in 200 components = 0.407263 Jy
! Clean residual min=-0.004372 max=0.008737 Jy/beam
! Clean residual mean=-0.000064 rms=0.001407 Jy/beam
! Combined flux in latest and established models = 0.407263 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.407263 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.3 mas, bmaj=10.22 mas, bpa=-10.63 degrees
! Estimated noise=0.676821 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178055 Jy
! Component: 100  -  total flux cleaned = 0.0278456 Jy
! Component: 150  -  total flux cleaned = 0.0341185 Jy
! Component: 200  -  total flux cleaned = 0.0385414 Jy
! Total flux subtracted in 200 components = 0.0385414 Jy
! Clean residual min=-0.003243 max=0.003228 Jy/beam
! Clean residual mean=-0.000040 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.445805 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 81 components and 0.445805 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.086 mas, bmaj=24.78 mas, bpa=-4.346 degrees
! Estimated noise=0.819149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00413374 Jy
! Component: 100  -  total flux cleaned = 0.00596935 Jy
! Component: 150  -  total flux cleaned = 0.00694188 Jy
! Component: 200  -  total flux cleaned = 0.00751416 Jy
! Total flux subtracted in 200 components = 0.00751416 Jy
! Clean residual min=-0.003182 max=0.002686 Jy/beam
! Clean residual mean=-0.000049 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.453319 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000423089 Jy
! Component: 100  -  total flux cleaned = 0.000737882 Jy
! Component: 150  -  total flux cleaned = 0.000831426 Jy
! Component: 200  -  total flux cleaned = 0.000920693 Jy
! Total flux subtracted in 200 components = 0.000920693 Jy
! Clean residual min=-0.002990 max=0.002595 Jy/beam
! Clean residual mean=-0.000044 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.45424 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 147 components and 0.454239 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.3 mas, bmaj=10.22 mas, bpa=-10.63 degrees
! Estimated noise=0.676821 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000399363 Jy
! Component: 100  -  total flux cleaned = 0.00056158 Jy
! Component: 150  -  total flux cleaned = 0.000490966 Jy
! Component: 200  -  total flux cleaned = 0.000489233 Jy
! Total flux subtracted in 200 components = 0.000489233 Jy
! Clean residual min=-0.002527 max=0.002266 Jy/beam
! Clean residual mean=-0.000023 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.454729 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 171 components and 0.454729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.240381Jy  sigma=0.714306
! Fit after  self-cal, rms=0.240346Jy  sigma=0.713758
wmodel J1007-3333_S_map.mod
! Writing 171 model components to file: J1007-3333_S_map.mod
wobs   J1007-3333_S_uvs.fits
! Writing UV FITS file: J1007-3333_S_uvs.fits
wwins  J1007-3333_S_map.win
! wwins: Wrote 4 windows to J1007-3333_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000992992 Jy
! Component: 100  -  total flux cleaned = -0.00172862 Jy
! Component: 150  -  total flux cleaned = -0.00242181 Jy
! Component: 200  -  total flux cleaned = -0.00297076 Jy
! Component: 250  -  total flux cleaned = -0.00349952 Jy
! Component: 300  -  total flux cleaned = -0.00384133 Jy
! Component: 350  -  total flux cleaned = -0.00404169 Jy
! Component: 400  -  total flux cleaned = -0.00430259 Jy
! Component: 450  -  total flux cleaned = -0.00446241 Jy
! Component: 500  -  total flux cleaned = -0.00465081 Jy
! Component: 550  -  total flux cleaned = -0.00468183 Jy
! Component: 600  -  total flux cleaned = -0.00492537 Jy
! Component: 650  -  total flux cleaned = -0.0051946 Jy
! Component: 700  -  total flux cleaned = -0.00545988 Jy
! Component: 750  -  total flux cleaned = -0.00563472 Jy
! Component: 800  -  total flux cleaned = -0.00595117 Jy
! Component: 850  -  total flux cleaned = -0.00615004 Jy
! Component: 900  -  total flux cleaned = -0.0064593 Jy
! Component: 950  -  total flux cleaned = -0.00681989 Jy
! Component: 1000  -  total flux cleaned = -0.00706706 Jy
! Component: 1050  -  total flux cleaned = -0.00731113 Jy
! Component: 1100  -  total flux cleaned = -0.00757993 Jy
! Component: 1150  -  total flux cleaned = -0.00787217 Jy
! Component: 1200  -  total flux cleaned = -0.00810922 Jy
! Component: 1250  -  total flux cleaned = -0.00824009 Jy
! Component: 1300  -  total flux cleaned = -0.00855033 Jy
! Component: 1350  -  total flux cleaned = -0.00870409 Jy
! Component: 1400  -  total flux cleaned = -0.00888216 Jy
! Component: 1450  -  total flux cleaned = -0.00915847 Jy
! Component: 1500  -  total flux cleaned = -0.00935769 Jy
! Component: 1550  -  total flux cleaned = -0.0094567 Jy
! Component: 1600  -  total flux cleaned = -0.00967743 Jy
! Component: 1650  -  total flux cleaned = -0.00987159 Jy
! Component: 1700  -  total flux cleaned = -0.010016 Jy
! Component: 1750  -  total flux cleaned = -0.0101831 Jy
! Component: 1800  -  total flux cleaned = -0.0103021 Jy
! Component: 1850  -  total flux cleaned = -0.010467 Jy
! Component: 1900  -  total flux cleaned = -0.0106778 Jy
! Component: 1950  -  total flux cleaned = -0.0107939 Jy
! Component: 2000  -  total flux cleaned = -0.0109554 Jy
! Component: 2050  -  total flux cleaned = -0.0110701 Jy
! Component: 2100  -  total flux cleaned = -0.0112293 Jy
! Component: 2150  -  total flux cleaned = -0.0114326 Jy
! Component: 2200  -  total flux cleaned = -0.0116117 Jy
! Component: 2250  -  total flux cleaned = -0.0117896 Jy
! Component: 2300  -  total flux cleaned = -0.0119443 Jy
! Component: 2350  -  total flux cleaned = -0.0120981 Jy
! Component: 2400  -  total flux cleaned = -0.0122946 Jy
! Component: 2450  -  total flux cleaned = -0.0124898 Jy
! Component: 2500  -  total flux cleaned = -0.0125542 Jy
! Component: 2550  -  total flux cleaned = -0.0127682 Jy
! Component: 2600  -  total flux cleaned = -0.0129166 Jy
! Component: 2650  -  total flux cleaned = -0.0130433 Jy
! Component: 2700  -  total flux cleaned = -0.0132322 Jy
! Component: 2750  -  total flux cleaned = -0.0133779 Jy
! Component: 2800  -  total flux cleaned = -0.0136059 Jy
! Component: 2850  -  total flux cleaned = -0.0136677 Jy
! Component: 2900  -  total flux cleaned = -0.0137908 Jy
! Component: 2950  -  total flux cleaned = -0.0140147 Jy
! Component: 3000  -  total flux cleaned = -0.0142173 Jy
! Component: 3050  -  total flux cleaned = -0.0143581 Jy
! Component: 3100  -  total flux cleaned = -0.0145784 Jy
! Component: 3150  -  total flux cleaned = -0.014678 Jy
! Component: 3200  -  total flux cleaned = -0.014777 Jy
! Component: 3250  -  total flux cleaned = -0.0148753 Jy
! Component: 3300  -  total flux cleaned = -0.0150516 Jy
! Component: 3350  -  total flux cleaned = -0.0150712 Jy
! Component: 3400  -  total flux cleaned = -0.0152842 Jy
! Component: 3450  -  total flux cleaned = -0.0154768 Jy
! Component: 3500  -  total flux cleaned = -0.0156491 Jy
! Component: 3550  -  total flux cleaned = -0.0157253 Jy
! Component: 3600  -  total flux cleaned = -0.0158392 Jy
! Component: 3650  -  total flux cleaned = -0.0160276 Jy
! Component: 3700  -  total flux cleaned = -0.0160464 Jy
! Component: 3750  -  total flux cleaned = -0.0161585 Jy
! Component: 3800  -  total flux cleaned = -0.0163254 Jy
! Component: 3850  -  total flux cleaned = -0.0163623 Jy
! Component: 3900  -  total flux cleaned = -0.0164358 Jy
! Component: 3950  -  total flux cleaned = -0.0166004 Jy
! Component: 4000  -  total flux cleaned = -0.0166369 Jy
! Component: 4050  -  total flux cleaned = -0.0167818 Jy
! Total flux subtracted in 4096 components = -0.0167456 Jy
! Clean residual min=-0.001027 max=0.001020 Jy/beam
! Clean residual mean=-0.000014 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.437983 Jy
keep
! Adding 291 model components to the UV plane model.
! The established model now contains 461 components and 0.437983 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J1007-3333_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.3 x 10.22 at -10.63 degrees (North through East)
! Clean map  min=-0.0022677  max=0.37803 Jy/beam
! Writing clean map to FITS file: J1007-3333_S_map.fits
wmodel J1007-3333_S_map.mod
! Writing 461 model components to file: J1007-3333_S_map.mod
wobs   J1007-3333_S_uvs.fits
! Writing UV FITS file: J1007-3333_S_uvs.fits
wwins  J1007-3333_S_map.win
! wwins: Wrote 5 windows to J1007-3333_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.378031 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000350826 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.27841 0.27841 0.55682 1.11364 2.22728 4.45456 8.90912 17.8182 35.6365 71.273
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.378 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1077.55 
quit
! Quitting program
! Log file J1007-3333_S_dfm.log closed on Fri Feb 15 19:50:32 2019