! Started logfile: /vlbi/bp222/temp_maps//J0952-2720_X_dfm.log on Thu Feb 14 22:46:44 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0952-2720_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0952-2720_X_uvm.fits ! AN table 1: 23 integrations on 36 of 36 possible baselines. ! AN table 2: 69 integrations on 45 of 45 possible baselines. ! AN table 3: 64 integrations on 28 of 28 possible baselines. ! AN table 4: 23 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.911862 visibilities/baseline/integration-bin. ! Found source: J0952-2720 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 66420 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0952-2720_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 40 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.020523Jy sigma=12.410020 ! Fit after self-cal, rms=0.822233Jy sigma=9.855776 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6457 mas, bmaj=1.78 mas, bpa=-0.37 degrees ! Estimated noise=0.588304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131382 Jy ! Component: 100 - total flux cleaned = 0.166624 Jy ! Total flux subtracted in 100 components = 0.166624 Jy ! Clean residual min=-0.007152 max=0.022768 Jy/beam ! Clean residual mean=-0.000044 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.166624 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.166624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085203Jy sigma=0.946835 ! Fit after self-cal, rms=0.085180Jy sigma=0.946537 ! Inverting map ! Added new window around map position (-1.2, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220032 Jy ! Component: 100 - total flux cleaned = 0.0346715 Jy ! Total flux subtracted in 100 components = 0.0346715 Jy ! Clean residual min=-0.004304 max=0.011854 Jy/beam ! Clean residual mean=-0.000024 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.201296 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.201296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077163Jy sigma=0.819082 ! Fit after self-cal, rms=0.076610Jy sigma=0.813037 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100322 Jy ! Component: 100 - total flux cleaned = 0.0160213 Jy ! Total flux subtracted in 100 components = 0.0160213 Jy ! Clean residual min=-0.003271 max=0.007009 Jy/beam ! Clean residual mean=-0.000014 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.217317 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 20 components and 0.217317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074707Jy sigma=0.780895 ! Fit after self-cal, rms=0.074574Jy sigma=0.779274 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00519715 Jy ! Component: 100 - total flux cleaned = 0.00834576 Jy ! Total flux subtracted in 100 components = 0.00834576 Jy ! Clean residual min=-0.003262 max=0.005334 Jy/beam ! Clean residual mean=-0.000010 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.225663 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 20 components and 0.225663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074051Jy sigma=0.770732 ! Fit after self-cal, rms=0.073995Jy sigma=0.769851 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9008 mas, bmaj=2.454 mas, bpa=-5.221 degrees ! Estimated noise=0.24211 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526359 Jy ! Component: 100 - total flux cleaned = 0.00843679 Jy ! Component: 150 - total flux cleaned = 0.0102043 Jy ! Component: 200 - total flux cleaned = 0.0105909 Jy ! Total flux subtracted in 200 components = 0.0105909 Jy ! Clean residual min=-0.003473 max=0.002792 Jy/beam ! Clean residual mean=-0.000000 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.236254 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 39 components and 0.236254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073550Jy sigma=0.764250 ! Fit after self-cal, rms=0.073551Jy sigma=0.764029 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9008 x 2.454 at -5.221 degrees (North through East) ! Clean map min=-0.0032236 max=0.17566 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 1.02 KP 0.93 ! LA 1.00 NL 0.95 OV 0.98 PT 0.96 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.01 HN 1.12 KP 1.06 ! LA 1.04 MK 1.03 NL 1.18 OV 0.91 ! PT 0.95 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.98 HN 1.18 KP 1.00 ! MK 0.97 NL 0.87 OV 0.97 PT 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00 HN 1.04 LA 1.00 NL 1.09 ! OV 0.93 PT 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.95 HN 0.95 KP 0.95 ! LA 1.03 NL 0.97 OV 1.03 PT 0.95 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 HN 1.13 KP 1.04 ! LA 1.01 MK 1.02 NL 1.22 OV 0.92 ! PT 0.96 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HN 1.18 KP 0.98 ! MK 0.96 NL 0.88 OV 0.99 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.98 HN 1.10 LA 0.98 NL 1.07 ! OV 0.98 PT 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.02 KP 0.99 ! LA 1.02 NL 0.96 OV 0.99 PT 0.97 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.01 HN 1.08 KP 1.06 ! LA 1.04 MK 1.04 NL 1.16 OV 0.92 ! PT 0.97 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 HN 1.24 KP 0.99 ! MK 0.94 NL 0.90 OV 0.99 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 HN 1.16 LA 0.97 NL 1.04 ! OV 0.94 PT 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 1.00 KP 0.95 ! LA 1.01 NL 0.97 OV 0.98 PT 0.99 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.02 HN 1.05 KP 1.06 ! LA 1.04 MK 1.02 NL 1.18 OV 0.92 ! PT 0.96 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.98 HN 1.10 KP 0.98 ! MK 0.96 NL 0.90 OV 0.99 PT 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 HN 1.01 LA 0.97 NL 1.06 ! OV 0.94 PT 1.11 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.00 KP 0.96 ! LA 1.01 NL 0.95 OV 0.97 PT 0.97 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.00 HN 1.10 KP 1.06 ! LA 1.03 MK 1.04 NL 1.22 OV 0.91 ! PT 0.90 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.98 HN 1.25 KP 1.00 ! MK 0.96 NL 0.91 OV 0.97 PT 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 HN 0.96 LA 1.02 NL 1.02 ! OV 0.95 PT 1.06 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.01 KP 0.95 ! LA 1.00 NL 0.98 OV 0.98 PT 0.94 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.02 HN 1.07 KP 1.06 ! LA 1.04 MK 1.05 NL 1.18 OV 0.92 ! PT 0.95 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.99 HN 1.23 KP 0.99 ! MK 0.95 NL 0.90 OV 0.98 PT 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 HN 1.07 LA 0.99 NL 1.05 ! OV 0.90 PT 1.15 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.00 KP 0.94 ! LA 1.04 NL 0.98 OV 0.99 PT 0.98 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 HN 1.10 KP 1.07 ! LA 1.04 MK 1.03 NL 1.19 OV 0.91 ! PT 0.95 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.98 HN 1.17 KP 0.99 ! MK 0.96 NL 0.89 OV 0.99 PT 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00 HN 1.06 LA 1.01 NL 1.09 ! OV 0.92 PT 1.11 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.96 KP 0.96 ! LA 1.02 NL 0.98 OV 0.97 PT 0.94 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.01 HN 1.10 KP 1.05 ! LA 1.04 MK 1.04 NL 1.21 OV 0.93 ! PT 0.94 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.99 HN 1.13 KP 1.00 ! MK 0.95 NL 0.91 OV 0.98 PT 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 HN 1.01 LA 1.00 NL 1.07 ! OV 0.92 PT 1.09 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.05 KP 0.94 ! LA 1.01 NL 0.98 OV 0.97 PT 1.00 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.00 HN 1.06 KP 1.08 ! LA 1.04 MK 1.03 NL 1.18 OV 0.93 ! PT 0.98 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.99 HN 1.22 KP 1.00 ! MK 0.95 NL 0.87 OV 0.98 PT 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.03 HN 1.05 LA 0.98 NL 1.04 ! OV 0.96 PT 1.15 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.02 KP 0.97 ! LA 1.03 NL 0.98 OV 1.00 PT 0.96 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.01 HN 1.12 KP 1.03 ! LA 1.04 MK 1.03 NL 1.19 OV 0.93 ! PT 0.95 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.97 HN 1.17 KP 0.99 ! MK 0.98 NL 0.90 OV 1.02 PT 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.06 HN 1.01 LA 0.99 NL 1.06 ! OV 0.96 PT 1.12 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 0.97 KP 0.96 ! LA 1.03 NL 0.97 OV 1.00 PT 0.97 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.02 HN 1.11 KP 1.05 ! LA 1.04 MK 1.03 NL 1.19 OV 0.92 ! PT 0.96 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.01 HN 1.13 KP 1.00 ! MK 0.98 NL 0.88 OV 0.97 PT 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00 HN 1.04 LA 1.07 NL 1.00 ! OV 0.96 PT 1.12 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.07 KP 0.94 ! LA 1.04 NL 0.98 OV 0.99 PT 0.97 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 1.09 KP 1.08 ! LA 1.04 MK 1.06 NL 1.17 OV 0.92 ! PT 0.94 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.99 HN 1.12 KP 0.98 ! MK 0.98 NL 0.90 OV 0.99 PT 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 HN 1.04 LA 0.99 NL 1.06 ! OV 0.96 PT 1.08 ! ! ! Fit before self-cal, rms=0.073551Jy sigma=0.764029 ! Fit after self-cal, rms=0.074093Jy sigma=0.737389 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9048 mas, bmaj=2.452 mas, bpa=-5.284 degrees ! Estimated noise=0.24345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000793412 Jy ! Component: 100 - total flux cleaned = -0.00102926 Jy ! Component: 150 - total flux cleaned = -0.00117143 Jy ! Component: 200 - total flux cleaned = -0.0011963 Jy ! Total flux subtracted in 200 components = -0.0011963 Jy ! Clean residual min=-0.001536 max=0.001466 Jy/beam ! Clean residual mean=0.000001 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.235057 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.235057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074063Jy sigma=0.737081 ! Fit after self-cal, rms=0.074109Jy sigma=0.736930 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074109Jy sigma=0.736930 ! Fit after self-cal, rms=0.074234Jy sigma=0.734711 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9048 mas, bmaj=2.454 mas, bpa=-5.319 degrees ! Estimated noise=0.243445 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000435037 Jy ! Component: 100 - total flux cleaned = -0.000646631 Jy ! Component: 150 - total flux cleaned = -0.000765446 Jy ! Component: 200 - total flux cleaned = -0.000800369 Jy ! Total flux subtracted in 200 components = -0.000800369 Jy ! Clean residual min=-0.001144 max=0.001125 Jy/beam ! Clean residual mean=0.000001 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.234257 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 61 components and 0.234257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074222Jy sigma=0.734558 ! Fit after self-cal, rms=0.074226Jy sigma=0.734546 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.17863e-05 Jy ! Component: 100 - total flux cleaned = -3.26966e-05 Jy ! Component: 150 - total flux cleaned = -3.26188e-05 Jy ! Component: 200 - total flux cleaned = -3.27227e-05 Jy ! Total flux subtracted in 200 components = -3.27227e-05 Jy ! Clean residual min=-0.001110 max=0.001117 Jy/beam ! Clean residual mean=0.000001 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.234224 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 0.234224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074220Jy sigma=0.734481 ! Fit after self-cal, rms=0.074219Jy sigma=0.734476 ! Inverting map ! Added new window around map position (-20.6, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000760122 Jy ! Component: 100 - total flux cleaned = 0.000910855 Jy ! Component: 150 - total flux cleaned = 0.000977348 Jy ! Component: 200 - total flux cleaned = 0.00107599 Jy ! Total flux subtracted in 200 components = 0.00107599 Jy ! Clean residual min=-0.001047 max=0.001046 Jy/beam ! Clean residual mean=-0.000000 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.2353 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 85 components and 0.2353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074201Jy sigma=0.734291 ! Fit after self-cal, rms=0.074199Jy sigma=0.734264 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074199Jy sigma=0.734264 ! Fit after self-cal, rms=0.075064Jy sigma=0.732008 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9048 mas, bmaj=2.454 mas, bpa=-5.359 degrees ! Estimated noise=0.243512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000409399 Jy ! Component: 100 - total flux cleaned = -0.000487253 Jy ! Component: 150 - total flux cleaned = -0.000514004 Jy ! Component: 200 - total flux cleaned = -0.000513705 Jy ! Total flux subtracted in 200 components = -0.000513705 Jy ! Clean residual min=-0.000893 max=0.000828 Jy/beam ! Clean residual mean=0.000001 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.234786 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 97 components and 0.234786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075058Jy sigma=0.731933 ! Fit after self-cal, rms=0.075075Jy sigma=0.731916 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.75951e-05 Jy ! Component: 100 - total flux cleaned = -3.92245e-05 Jy ! Component: 150 - total flux cleaned = -5.03164e-05 Jy ! Component: 200 - total flux cleaned = -5.00642e-05 Jy ! Total flux subtracted in 200 components = -5.00642e-05 Jy ! Clean residual min=-0.000888 max=0.000833 Jy/beam ! Clean residual mean=0.000001 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.234736 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 101 components and 0.234736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075072Jy sigma=0.731879 ! Fit after self-cal, rms=0.075072Jy sigma=0.731878 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075072Jy sigma=0.731878 ! Fit after self-cal, rms=0.075147Jy sigma=0.731865 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.316 mas, bmaj=5.765 mas, bpa=0.926 degrees ! Estimated noise=0.287748 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000200481 Jy ! Component: 100 - total flux cleaned = -0.000238785 Jy ! Component: 150 - total flux cleaned = -0.000271953 Jy ! Component: 200 - total flux cleaned = -0.000289438 Jy ! Total flux subtracted in 200 components = -0.000289438 Jy ! Clean residual min=-0.001077 max=0.000807 Jy/beam ! Clean residual mean=0.000001 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.234447 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 120 components and 0.234447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075147Jy sigma=0.731850 ! Fit after self-cal, rms=0.075147Jy sigma=0.731850 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.66838e-06 Jy ! Component: 100 - total flux cleaned = -8.52394e-06 Jy ! Component: 150 - total flux cleaned = 6.0463e-06 Jy ! Component: 200 - total flux cleaned = 1.06839e-05 Jy ! Total flux subtracted in 200 components = 1.06839e-05 Jy ! Clean residual min=-0.001075 max=0.000804 Jy/beam ! Clean residual mean=0.000001 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.234458 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 128 components and 0.234458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075147Jy sigma=0.731845 ! Fit after self-cal, rms=0.075147Jy sigma=0.731844 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9046 mas, bmaj=2.453 mas, bpa=-5.355 degrees ! Estimated noise=0.243376 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9046 x 2.453 at -5.355 degrees (North through East) ! Clean map min=-0.00084083 max=0.17674 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6469 mas, bmaj=1.779 mas, bpa=-0.3111 degrees ! Estimated noise=0.593708 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132096 Jy ! Component: 100 - total flux cleaned = 0.170884 Jy ! Component: 150 - total flux cleaned = 0.192305 Jy ! Component: 200 - total flux cleaned = 0.20542 Jy ! Total flux subtracted in 200 components = 0.20542 Jy ! Clean residual min=-0.002815 max=0.007513 Jy/beam ! Clean residual mean=-0.000019 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.20542 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.20542 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9046 mas, bmaj=2.453 mas, bpa=-5.355 degrees ! Estimated noise=0.243376 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131097 Jy ! Component: 100 - total flux cleaned = 0.019459 Jy ! Component: 150 - total flux cleaned = 0.0229824 Jy ! Component: 200 - total flux cleaned = 0.0251417 Jy ! Total flux subtracted in 200 components = 0.0251417 Jy ! Clean residual min=-0.001051 max=0.001125 Jy/beam ! Clean residual mean=-0.000002 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.230562 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 47 components and 0.230562 Jy ! Inverting map ! Added new window around map position (2, 5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138344 Jy ! Component: 100 - total flux cleaned = 0.0023225 Jy ! Component: 150 - total flux cleaned = 0.00271248 Jy ! Component: 200 - total flux cleaned = 0.00286631 Jy ! Total flux subtracted in 200 components = 0.00286631 Jy ! Clean residual min=-0.000935 max=0.000758 Jy/beam ! Clean residual mean=0.000000 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.233428 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 69 components and 0.233428 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.316 mas, bmaj=5.765 mas, bpa=0.926 degrees ! Estimated noise=0.287748 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000450067 Jy ! Component: 100 - total flux cleaned = 0.000710135 Jy ! Component: 150 - total flux cleaned = 0.000824628 Jy ! Component: 200 - total flux cleaned = 0.000886352 Jy ! Total flux subtracted in 200 components = 0.000886352 Jy ! Clean residual min=-0.001021 max=0.000752 Jy/beam ! Clean residual mean=0.000001 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.234314 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.18972e-05 Jy ! Component: 100 - total flux cleaned = 3.16849e-05 Jy ! Component: 150 - total flux cleaned = 3.14314e-05 Jy ! Component: 200 - total flux cleaned = 3.98443e-05 Jy ! Total flux subtracted in 200 components = 3.98443e-05 Jy ! Clean residual min=-0.001019 max=0.000763 Jy/beam ! Clean residual mean=0.000001 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.234354 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 102 components and 0.234354 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9046 mas, bmaj=2.453 mas, bpa=-5.355 degrees ! Estimated noise=0.243376 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000245551 Jy ! Component: 100 - total flux cleaned = -0.000284699 Jy ! Component: 150 - total flux cleaned = -0.00026871 Jy ! Component: 200 - total flux cleaned = -0.000237577 Jy ! Total flux subtracted in 200 components = -0.000237577 Jy ! Clean residual min=-0.000849 max=0.000783 Jy/beam ! Clean residual mean=0.000001 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.234117 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 116 components and 0.234117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075161Jy sigma=0.731906 ! Fit after self-cal, rms=0.075155Jy sigma=0.731874 wmodel J0952-2720_X_map.mod ! Writing 116 model components to file: J0952-2720_X_map.mod wobs J0952-2720_X_uvs.fits ! Writing UV FITS file: J0952-2720_X_uvs.fits wwins J0952-2720_X_map.win ! wwins: Wrote 6 windows to J0952-2720_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.21632e-05 Jy ! Component: 100 - total flux cleaned = -8.87068e-05 Jy ! Component: 150 - total flux cleaned = -0.000101692 Jy ! Component: 200 - total flux cleaned = -0.000138539 Jy ! Component: 250 - total flux cleaned = -0.000174731 Jy ! Component: 300 - total flux cleaned = -0.000198125 Jy ! Component: 350 - total flux cleaned = -0.000175303 Jy ! Component: 400 - total flux cleaned = -0.000198106 Jy ! Component: 450 - total flux cleaned = -0.000220316 Jy ! Component: 500 - total flux cleaned = -0.000220155 Jy ! Component: 550 - total flux cleaned = -0.000198965 Jy ! Component: 600 - total flux cleaned = -0.000230655 Jy ! Component: 650 - total flux cleaned = -0.000251327 Jy ! Component: 700 - total flux cleaned = -0.000261443 Jy ! Component: 750 - total flux cleaned = -0.000281606 Jy ! Component: 800 - total flux cleaned = -0.000291494 Jy ! Component: 850 - total flux cleaned = -0.000291489 Jy ! Component: 900 - total flux cleaned = -0.00029156 Jy ! Component: 950 - total flux cleaned = -0.000349226 Jy ! Component: 1000 - total flux cleaned = -0.000339524 Jy ! Component: 1050 - total flux cleaned = -0.000358377 Jy ! Component: 1100 - total flux cleaned = -0.000367556 Jy ! Component: 1150 - total flux cleaned = -0.000385971 Jy ! Component: 1200 - total flux cleaned = -0.000385847 Jy ! Component: 1250 - total flux cleaned = -0.000385946 Jy ! Component: 1300 - total flux cleaned = -0.000430856 Jy ! Component: 1350 - total flux cleaned = -0.000439799 Jy ! Component: 1400 - total flux cleaned = -0.000466386 Jy ! Component: 1450 - total flux cleaned = -0.000483793 Jy ! Component: 1500 - total flux cleaned = -0.000466408 Jy ! Component: 1550 - total flux cleaned = -0.000475168 Jy ! Component: 1600 - total flux cleaned = -0.000483754 Jy ! Component: 1650 - total flux cleaned = -0.000483741 Jy ! Component: 1700 - total flux cleaned = -0.000509121 Jy ! Component: 1750 - total flux cleaned = -0.000500756 Jy ! Component: 1800 - total flux cleaned = -0.000517457 Jy ! Component: 1850 - total flux cleaned = -0.000533947 Jy ! Component: 1900 - total flux cleaned = -0.000525727 Jy ! Component: 1950 - total flux cleaned = -0.000517462 Jy ! Component: 2000 - total flux cleaned = -0.000533722 Jy ! Component: 2050 - total flux cleaned = -0.000581958 Jy ! Component: 2100 - total flux cleaned = -0.000557993 Jy ! Component: 2150 - total flux cleaned = -0.000557961 Jy ! Component: 2200 - total flux cleaned = -0.000581618 Jy ! Component: 2250 - total flux cleaned = -0.000589512 Jy ! Component: 2300 - total flux cleaned = -0.000558446 Jy ! Component: 2350 - total flux cleaned = -0.00058164 Jy ! Component: 2400 - total flux cleaned = -0.000581709 Jy ! Component: 2450 - total flux cleaned = -0.000604617 Jy ! Component: 2500 - total flux cleaned = -0.000619886 Jy ! Component: 2550 - total flux cleaned = -0.000612234 Jy ! Component: 2600 - total flux cleaned = -0.000612258 Jy ! Component: 2650 - total flux cleaned = -0.000597314 Jy ! Component: 2700 - total flux cleaned = -0.000597298 Jy ! Component: 2750 - total flux cleaned = -0.0006269 Jy ! Component: 2800 - total flux cleaned = -0.000626919 Jy ! Component: 2850 - total flux cleaned = -0.000619613 Jy ! Component: 2900 - total flux cleaned = -0.000597734 Jy ! Component: 2950 - total flux cleaned = -0.000619507 Jy ! Component: 3000 - total flux cleaned = -0.000605017 Jy ! Component: 3050 - total flux cleaned = -0.000640938 Jy ! Component: 3100 - total flux cleaned = -0.00059083 Jy ! Component: 3150 - total flux cleaned = -0.000590862 Jy ! Component: 3200 - total flux cleaned = -0.00058375 Jy ! Component: 3250 - total flux cleaned = -0.000562617 Jy ! Component: 3300 - total flux cleaned = -0.000569638 Jy ! Component: 3350 - total flux cleaned = -0.000527694 Jy ! Component: 3400 - total flux cleaned = -0.000492953 Jy ! Component: 3450 - total flux cleaned = -0.000499874 Jy ! Component: 3500 - total flux cleaned = -0.000499884 Jy ! Component: 3550 - total flux cleaned = -0.000458681 Jy ! Component: 3600 - total flux cleaned = -0.000445021 Jy ! Component: 3650 - total flux cleaned = -0.000465483 Jy ! Component: 3700 - total flux cleaned = -0.000438387 Jy ! Component: 3750 - total flux cleaned = -0.000418142 Jy ! Component: 3800 - total flux cleaned = -0.000431573 Jy ! Component: 3850 - total flux cleaned = -0.000404785 Jy ! Component: 3900 - total flux cleaned = -0.000404796 Jy ! Component: 3950 - total flux cleaned = -0.000398123 Jy ! Component: 4000 - total flux cleaned = -0.000358423 Jy ! Component: 4050 - total flux cleaned = -0.000365014 Jy ! Total flux subtracted in 4096 components = -0.000351913 Jy ! Clean residual min=-0.000379 max=0.000428 Jy/beam ! Clean residual mean=0.000000 rms=0.000116 Jy/beam ! Combined flux in latest and established models = 0.233765 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 429 components and 0.233765 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0952-2720_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9046 x 2.453 at -5.355 degrees (North through East) ! Clean map min=-0.00063145 max=0.17687 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0952-2720_X_map.fits wmodel /vlbi/bp222/temp_maps//J0952-2720_X_map.mod ! Writing 429 model components to file: /vlbi/bp222/temp_maps//J0952-2720_X_map.mod wobs /vlbi/bp222/temp_maps//J0952-2720_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0952-2720_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0952-2720_X_map.win ! wwins: Wrote 7 windows to /vlbi/bp222/temp_maps//J0952-2720_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.176865 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000115788 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.196401 0.196401 0.392801 0.785602 1.5712 3.14241 6.28482 12.5696 25.1393 50.2785 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.176 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1527.49 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0952-2720_X_dfm.log closed on Thu Feb 14 22:46:52 2019