! Started logfile: J0935-3332_S_dfm.log on Fri Feb 15 19:50:06 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J0935-3332_S_uvm.fits
! Reading UV FITS file: J0935-3332_S_uvm.fits
! AN table 1: 23 integrations on 28 of 28 possible baselines.
! AN table 2: 23 integrations on 28 of 28 possible baselines.
! AN table 3: 48 integrations on 36 of 36 possible baselines.
! AN table 4: 24 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.925 visibilities/baseline/integration-bin.
! Found source: J0935-3332
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 13024 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0935-3332_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
!  A total of 36 telescope corrections were flagged in sub-array 3.
!  A total of 8 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 2.
!  A total of 36 telescope corrections were flagged in sub-array 3.
!  A total of 8 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 2.
!  A total of 36 telescope corrections were flagged in sub-array 3.
!  A total of 8 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 4.
!  A total of 184 telescope corrections were flagged in sub-array 1.
!  A total of 184 telescope corrections were flagged in sub-array 2.
!  A total of 432 telescope corrections were flagged in sub-array 3.
!  A total of 168 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=1.012337Jy  sigma=10.096624
! Fit after  self-cal, rms=0.875147Jy  sigma=8.521188
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.631 mas, bmaj=8.71 mas, bpa=-0.8904 degrees
! Estimated noise=1.22222 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0914081 Jy
! Component: 100  -  total flux cleaned = 0.132362 Jy
! Total flux subtracted in 100 components = 0.132362 Jy
! Clean residual min=-0.010215 max=0.021271 Jy/beam
! Clean residual mean=0.000014 rms=0.003038 Jy/beam
! Combined flux in latest and established models = 0.132362 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.132362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.110519Jy  sigma=1.008016
! Fit after  self-cal, rms=0.109886Jy  sigma=1.004298
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0257165 Jy
! Component: 100  -  total flux cleaned = 0.0425816 Jy
! Total flux subtracted in 100 components = 0.0425816 Jy
! Clean residual min=-0.007290 max=0.011452 Jy/beam
! Clean residual mean=0.000009 rms=0.002062 Jy/beam
! Combined flux in latest and established models = 0.174944 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 70 components and 0.174944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.100887Jy  sigma=0.860206
! Fit after  self-cal, rms=0.100810Jy  sigma=0.859745
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.395 mas, bmaj=10.69 mas, bpa=-1.524 degrees
! Estimated noise=0.767694 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0214294 Jy
! Component: 100  -  total flux cleaned = 0.0338676 Jy
! Component: 150  -  total flux cleaned = 0.0414949 Jy
! Component: 200  -  total flux cleaned = 0.0464419 Jy
! Total flux subtracted in 200 components = 0.0464419 Jy
! Clean residual min=-0.004858 max=0.007417 Jy/beam
! Clean residual mean=-0.000026 rms=0.001759 Jy/beam
! Combined flux in latest and established models = 0.221385 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 145 components and 0.221386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097160Jy  sigma=0.793567
! Fit after  self-cal, rms=0.097025Jy  sigma=0.792443
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.395 x 10.69 at -1.524 degrees (North through East)
! Clean map  min=-0.0049468  max=0.11487 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        1.18     KP        0.98     LA        0.97     
!   NL        1.04     OV        1.05     PT        1.07     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        2.57     FD        0.94     HN        1.41     KP        0.90     
!   LA        0.92     NL        0.95     OV        0.92     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.94     HN        1.52     KP        0.90     LA        0.91     
!   MK        1.17     NL        1.15     OV        0.97     PT        0.96     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        1.14     HN        1.21     KP        0.97     LA        1.02     
!   NL        1.13     PT        1.13     SC        0.84     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        1.37     KP        1.00     LA        0.98     
!   NL        1.09     OV        1.06     PT        1.04     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.67     FD        0.98     HN        1.29     KP        0.91     
!   LA        0.87     NL        0.93     OV        0.97     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.97     HN        1.59     KP        0.88     LA        0.87     
!   MK        1.07     NL        1.08     OV        0.92     PT        0.97     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        1.10     HN        1.16     KP        1.00     LA        1.05     
!   NL        1.08     PT        1.07     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        1.28     KP        0.98     LA        0.93     
!   NL        0.98     OV        1.04     PT        1.08     SC        0.85     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.94     FD        0.96     HN        1.22     KP        0.91     
!   LA        0.92     NL        0.90     OV        0.92     SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.95     HN        1.75     KP        0.92     LA        0.87     
!   MK        0.91     NL        1.04     OV        0.92     PT        0.94     
!   SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        1.06     HN        1.33     KP        0.98     LA        1.04     
!   NL        0.95     PT        1.11     SC        0.96     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097025Jy  sigma=0.792443
! Fit after  self-cal, rms=0.127178Jy  sigma=0.753514
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.432 mas, bmaj=10.67 mas, bpa=-0.9553 degrees
! Estimated noise=0.773184 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000154069 Jy
! Component: 100  -  total flux cleaned = -0.000136774 Jy
! Component: 150  -  total flux cleaned = -0.000140112 Jy
! Component: 200  -  total flux cleaned = -0.000144048 Jy
! Total flux subtracted in 200 components = -0.000144048 Jy
! Clean residual min=-0.002307 max=0.002344 Jy/beam
! Clean residual mean=-0.000023 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.221241 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 163 components and 0.221241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.127043Jy  sigma=0.752720
! Fit after  self-cal, rms=0.127539Jy  sigma=0.752074
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.127539Jy  sigma=0.752074
! Fit after  self-cal, rms=0.129000Jy  sigma=0.751934
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.42 mas, bmaj=10.62 mas, bpa=-0.9128 degrees
! Estimated noise=0.7689 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000348734 Jy
! Component: 100  -  total flux cleaned = -0.000460619 Jy
! Component: 150  -  total flux cleaned = -0.000504694 Jy
! Component: 200  -  total flux cleaned = -0.000503659 Jy
! Total flux subtracted in 200 components = -0.000503659 Jy
! Clean residual min=-0.002218 max=0.002128 Jy/beam
! Clean residual mean=-0.000023 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.220738 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 171 components and 0.220738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.128934Jy  sigma=0.751567
! Fit after  self-cal, rms=0.128939Jy  sigma=0.751516
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000199731 Jy
! Component: 100  -  total flux cleaned = 0.000235262 Jy
! Component: 150  -  total flux cleaned = 0.000232353 Jy
! Component: 200  -  total flux cleaned = 0.000232113 Jy
! Total flux subtracted in 200 components = 0.000232113 Jy
! Clean residual min=-0.002146 max=0.002062 Jy/beam
! Clean residual mean=-0.000023 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.22097 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 177 components and 0.22097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.128908Jy  sigma=0.751356
! Fit after  self-cal, rms=0.128898Jy  sigma=0.751333
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.128898Jy  sigma=0.751333
! Fit after  self-cal, rms=0.128723Jy  sigma=0.750525
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.412 mas, bmaj=10.61 mas, bpa=-0.8425 degrees
! Estimated noise=0.76534 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000476802 Jy
! Component: 100  -  total flux cleaned = -0.000548072 Jy
! Component: 150  -  total flux cleaned = -0.000577567 Jy
! Component: 200  -  total flux cleaned = -0.000578099 Jy
! Total flux subtracted in 200 components = -0.000578099 Jy
! Clean residual min=-0.002122 max=0.002105 Jy/beam
! Clean residual mean=-0.000023 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.220392 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 185 components and 0.220392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.128689Jy  sigma=0.750385
! Fit after  self-cal, rms=0.128694Jy  sigma=0.750351
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.74719e-05 Jy
! Component: 100  -  total flux cleaned = 8.00425e-05 Jy
! Component: 150  -  total flux cleaned = 7.97981e-05 Jy
! Component: 200  -  total flux cleaned = 7.92495e-05 Jy
! Total flux subtracted in 200 components = 7.92495e-05 Jy
! Clean residual min=-0.002148 max=0.002149 Jy/beam
! Clean residual mean=-0.000022 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.220471 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 194 components and 0.220471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.128676Jy  sigma=0.750288
! Fit after  self-cal, rms=0.128673Jy  sigma=0.750272
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.128673Jy  sigma=0.750272
! Fit after  self-cal, rms=0.128317Jy  sigma=0.750205
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.133 mas, bmaj=23.8 mas, bpa=-2.561 degrees
! Estimated noise=0.887079 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000563807 Jy
! Component: 100  -  total flux cleaned = -0.000564778 Jy
! Component: 150  -  total flux cleaned = -0.000541106 Jy
! Component: 200  -  total flux cleaned = -0.000542925 Jy
! Total flux subtracted in 200 components = -0.000542925 Jy
! Clean residual min=-0.002216 max=0.001900 Jy/beam
! Clean residual mean=-0.000040 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.219928 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 202 components and 0.219928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.128300Jy  sigma=0.750215
! Fit after  self-cal, rms=0.128311Jy  sigma=0.750192
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.29611e-05 Jy
! Component: 100  -  total flux cleaned = 9.35647e-05 Jy
! Component: 150  -  total flux cleaned = 9.24848e-05 Jy
! Component: 200  -  total flux cleaned = 9.45859e-05 Jy
! Total flux subtracted in 200 components = 9.45859e-05 Jy
! Clean residual min=-0.002170 max=0.001900 Jy/beam
! Clean residual mean=-0.000039 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.220023 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 204 components and 0.220023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.128305Jy  sigma=0.750240
! Fit after  self-cal, rms=0.128305Jy  sigma=0.750222
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.404 mas, bmaj=10.57 mas, bpa=-0.7286 degrees
! Estimated noise=0.762173 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.404 x 10.57 at -0.7286 degrees (North through East)
! Clean map  min=-0.0020246  max=0.1155 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.629 mas, bmaj=8.59 mas, bpa=0.1076 degrees
! Estimated noise=1.22197 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0921818 Jy
! Component: 100  -  total flux cleaned = 0.134352 Jy
! Component: 150  -  total flux cleaned = 0.159102 Jy
! Component: 200  -  total flux cleaned = 0.17461 Jy
! Total flux subtracted in 200 components = 0.17461 Jy
! Clean residual min=-0.004913 max=0.008429 Jy/beam
! Clean residual mean=-0.000002 rms=0.001369 Jy/beam
! Combined flux in latest and established models = 0.17461 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 71 model components to the UV plane model.
! The established model now contains 71 components and 0.17461 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.404 mas, bmaj=10.57 mas, bpa=-0.7286 degrees
! Estimated noise=0.762173 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0171835 Jy
! Component: 100  -  total flux cleaned = 0.0269494 Jy
! Component: 150  -  total flux cleaned = 0.0329329 Jy
! Component: 200  -  total flux cleaned = 0.0367121 Jy
! Total flux subtracted in 200 components = 0.0367121 Jy
! Clean residual min=-0.002423 max=0.003584 Jy/beam
! Clean residual mean=-0.000043 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.211322 Jy
! Adding 110 model components to the UV plane model.
! The established model now contains 173 components and 0.211322 Jy
! Inverting map 
! Added new window around map position (-4, 1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00322969 Jy
! Component: 100  -  total flux cleaned = 0.00511922 Jy
! Component: 150  -  total flux cleaned = 0.00637856 Jy
! Component: 200  -  total flux cleaned = 0.00685671 Jy
! Total flux subtracted in 200 components = 0.00685671 Jy
! Clean residual min=-0.002101 max=0.002215 Jy/beam
! Clean residual mean=-0.000025 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.218178 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 208 components and 0.218178 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.133 mas, bmaj=23.8 mas, bpa=-2.561 degrees
! Estimated noise=0.887079 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000341136 Jy
! Component: 100  -  total flux cleaned = 0.000503921 Jy
! Component: 150  -  total flux cleaned = 0.000550327 Jy
! Component: 200  -  total flux cleaned = 0.000614672 Jy
! Total flux subtracted in 200 components = 0.000614672 Jy
! Clean residual min=-0.002131 max=0.001832 Jy/beam
! Clean residual mean=-0.000043 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.218793 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.95485e-05 Jy
! Component: 100  -  total flux cleaned = 9.5973e-05 Jy
! Component: 150  -  total flux cleaned = 0.000149018 Jy
! Component: 200  -  total flux cleaned = 0.000183616 Jy
! Total flux subtracted in 200 components = 0.000183616 Jy
! Clean residual min=-0.002139 max=0.001825 Jy/beam
! Clean residual mean=-0.000042 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.218977 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 234 components and 0.218977 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.404 mas, bmaj=10.57 mas, bpa=-0.7286 degrees
! Estimated noise=0.762173 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.79178e-05 Jy
! Component: 100  -  total flux cleaned = 2.9481e-05 Jy
! Component: 150  -  total flux cleaned = 7.61878e-05 Jy
! Component: 200  -  total flux cleaned = 9.70582e-05 Jy
! Total flux subtracted in 200 components = 9.70582e-05 Jy
! Clean residual min=-0.002081 max=0.002228 Jy/beam
! Clean residual mean=-0.000022 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.219074 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 251 components and 0.219074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.128271Jy  sigma=0.749972
! Fit after  self-cal, rms=0.128247Jy  sigma=0.749856
wmodel J0935-3332_S_map.mod
! Writing 251 model components to file: J0935-3332_S_map.mod
wobs   J0935-3332_S_uvs.fits
! Writing UV FITS file: J0935-3332_S_uvs.fits
wwins  J0935-3332_S_map.win
! wwins: Wrote 3 windows to J0935-3332_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174331 Jy
! Component: 100  -  total flux cleaned = -7.68612e-05 Jy
! Component: 150  -  total flux cleaned = -0.000487082 Jy
! Component: 200  -  total flux cleaned = -0.000750415 Jy
! Component: 250  -  total flux cleaned = -0.00103575 Jy
! Component: 300  -  total flux cleaned = -0.00115916 Jy
! Component: 350  -  total flux cleaned = -0.00124914 Jy
! Component: 400  -  total flux cleaned = -0.00121985 Jy
! Component: 450  -  total flux cleaned = -0.00124894 Jy
! Component: 500  -  total flux cleaned = -0.00122119 Jy
! Component: 550  -  total flux cleaned = -0.00124909 Jy
! Component: 600  -  total flux cleaned = -0.00124876 Jy
! Component: 650  -  total flux cleaned = -0.00130164 Jy
! Component: 700  -  total flux cleaned = -0.00127503 Jy
! Component: 750  -  total flux cleaned = -0.0014047 Jy
! Component: 800  -  total flux cleaned = -0.00137917 Jy
! Component: 850  -  total flux cleaned = -0.00145516 Jy
! Component: 900  -  total flux cleaned = -0.00148046 Jy
! Component: 950  -  total flux cleaned = -0.00152977 Jy
! Component: 1000  -  total flux cleaned = -0.00155437 Jy
! Component: 1050  -  total flux cleaned = -0.00162695 Jy
! Component: 1100  -  total flux cleaned = -0.00167451 Jy
! Component: 1150  -  total flux cleaned = -0.00174496 Jy
! Component: 1200  -  total flux cleaned = -0.00174496 Jy
! Component: 1250  -  total flux cleaned = -0.00181392 Jy
! Component: 1300  -  total flux cleaned = -0.00192696 Jy
! Component: 1350  -  total flux cleaned = -0.00197149 Jy
! Component: 1400  -  total flux cleaned = -0.00199318 Jy
! Component: 1450  -  total flux cleaned = -0.00205873 Jy
! Component: 1500  -  total flux cleaned = -0.00201557 Jy
! Component: 1550  -  total flux cleaned = -0.00212333 Jy
! Component: 1600  -  total flux cleaned = -0.00218746 Jy
! Component: 1650  -  total flux cleaned = -0.00218779 Jy
! Component: 1700  -  total flux cleaned = -0.00229231 Jy
! Component: 1750  -  total flux cleaned = -0.00229219 Jy
! Component: 1800  -  total flux cleaned = -0.00235389 Jy
! Component: 1850  -  total flux cleaned = -0.00239449 Jy
! Component: 1900  -  total flux cleaned = -0.00241458 Jy
! Component: 1950  -  total flux cleaned = -0.00241451 Jy
! Component: 2000  -  total flux cleaned = -0.00245429 Jy
! Component: 2050  -  total flux cleaned = -0.00245413 Jy
! Component: 2100  -  total flux cleaned = -0.00249319 Jy
! Component: 2150  -  total flux cleaned = -0.00257081 Jy
! Component: 2200  -  total flux cleaned = -0.00262875 Jy
! Component: 2250  -  total flux cleaned = -0.00264791 Jy
! Component: 2300  -  total flux cleaned = -0.00272362 Jy
! Component: 2350  -  total flux cleaned = -0.00278009 Jy
! Component: 2400  -  total flux cleaned = -0.00278021 Jy
! Component: 2450  -  total flux cleaned = -0.00287283 Jy
! Component: 2500  -  total flux cleaned = -0.00294632 Jy
! Component: 2550  -  total flux cleaned = -0.00294639 Jy
! Component: 2600  -  total flux cleaned = -0.00301867 Jy
! Component: 2650  -  total flux cleaned = -0.0029828 Jy
! Component: 2700  -  total flux cleaned = -0.00303642 Jy
! Component: 2750  -  total flux cleaned = -0.00310762 Jy
! Component: 2800  -  total flux cleaned = -0.00309006 Jy
! Component: 2850  -  total flux cleaned = -0.00316027 Jy
! Component: 2900  -  total flux cleaned = -0.00321244 Jy
! Component: 2950  -  total flux cleaned = -0.00322972 Jy
! Component: 3000  -  total flux cleaned = -0.00326413 Jy
! Component: 3050  -  total flux cleaned = -0.0032641 Jy
! Component: 3100  -  total flux cleaned = -0.00329795 Jy
! Component: 3150  -  total flux cleaned = -0.00334864 Jy
! Component: 3200  -  total flux cleaned = -0.00334869 Jy
! Component: 3250  -  total flux cleaned = -0.00334898 Jy
! Component: 3300  -  total flux cleaned = -0.00334919 Jy
! Component: 3350  -  total flux cleaned = -0.00343186 Jy
! Component: 3400  -  total flux cleaned = -0.00343183 Jy
! Component: 3450  -  total flux cleaned = -0.00344823 Jy
! Component: 3500  -  total flux cleaned = -0.00351312 Jy
! Component: 3550  -  total flux cleaned = -0.00348088 Jy
! Component: 3600  -  total flux cleaned = -0.00354504 Jy
! Component: 3650  -  total flux cleaned = -0.00359298 Jy
! Component: 3700  -  total flux cleaned = -0.00357713 Jy
! Component: 3750  -  total flux cleaned = -0.00360864 Jy
! Component: 3800  -  total flux cleaned = -0.00357713 Jy
! Component: 3850  -  total flux cleaned = -0.00362389 Jy
! Component: 3900  -  total flux cleaned = -0.00362382 Jy
! Component: 3950  -  total flux cleaned = -0.00360832 Jy
! Component: 4000  -  total flux cleaned = -0.00359308 Jy
! Component: 4050  -  total flux cleaned = -0.00363913 Jy
! Total flux subtracted in 4096 components = -0.00365453 Jy
! Clean residual min=-0.001325 max=0.001169 Jy/beam
! Clean residual mean=-0.000005 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.215419 Jy
keep
! Adding 337 model components to the UV plane model.
! The established model now contains 588 components and 0.215419 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J0935-3332_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.404 x 10.57 at -0.7286 degrees (North through East)
! Clean map  min=-0.0016978  max=0.11953 Jy/beam
! Writing clean map to FITS file: J0935-3332_S_map.fits
wmodel J0935-3332_S_map.mod
! Writing 588 model components to file: J0935-3332_S_map.mod
wobs   J0935-3332_S_uvs.fits
! Writing UV FITS file: J0935-3332_S_uvs.fits
wwins  J0935-3332_S_map.win
! wwins: Wrote 4 windows to J0935-3332_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.119534 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000303776 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.762401 0.762401 1.5248 3.04961 6.09921 12.1984 24.3968 48.7937 97.5874
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.119 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  393.493 
quit
! Quitting program
! Log file J0935-3332_S_dfm.log closed on Fri Feb 15 19:50:11 2019