! Started logfile: /vlbi/bp222/temp_maps//J0932+6507_X_dfm.log on Thu Feb 14 22:45:57 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0932+6507_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0932+6507_X_uvm.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! AN table 2: 92 integrations on 28 of 28 possible baselines. ! AN table 3: 23 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.927992 visibilities/baseline/integration-bin. ! Found source: J0932+6507 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 107016 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0932+6507_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.009538Jy sigma=17.517177 ! Fit after self-cal, rms=0.871927Jy sigma=14.986094 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6806 mas, bmaj=1.199 mas, bpa=-8.723 degrees ! Estimated noise=0.336199 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0944933 Jy ! Component: 100 - total flux cleaned = 0.132949 Jy ! Total flux subtracted in 100 components = 0.132949 Jy ! Clean residual min=-0.004663 max=0.018297 Jy/beam ! Clean residual mean=0.000002 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.132949 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.132949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070155Jy sigma=1.144307 ! Fit after self-cal, rms=0.069233Jy sigma=1.134075 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235134 Jy ! Component: 100 - total flux cleaned = 0.0347171 Jy ! Total flux subtracted in 100 components = 0.0347171 Jy ! Clean residual min=-0.004559 max=0.006553 Jy/beam ! Clean residual mean=-0.000000 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.167666 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 13 components and 0.167666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060830Jy sigma=0.975246 ! Fit after self-cal, rms=0.060194Jy sigma=0.967595 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00948758 Jy ! Component: 100 - total flux cleaned = 0.0124603 Jy ! Total flux subtracted in 100 components = 0.0124603 Jy ! Clean residual min=-0.005561 max=0.003822 Jy/beam ! Clean residual mean=-0.000001 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.180126 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 18 components and 0.180126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059064Jy sigma=0.952596 ! Fit after self-cal, rms=0.058888Jy sigma=0.949988 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195643 Jy ! Component: 100 - total flux cleaned = 0.00208991 Jy ! Total flux subtracted in 100 components = 0.00208991 Jy ! Clean residual min=-0.005348 max=0.003570 Jy/beam ! Clean residual mean=-0.000001 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.182216 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 19 components and 0.182216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058648Jy sigma=0.948030 ! Fit after self-cal, rms=0.058569Jy sigma=0.946860 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9137 mas, bmaj=1.597 mas, bpa=-14.65 degrees ! Estimated noise=0.128757 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.4, -35.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00710502 Jy ! Component: 100 - total flux cleaned = 0.0106748 Jy ! Component: 150 - total flux cleaned = 0.0123534 Jy ! Component: 200 - total flux cleaned = 0.0136327 Jy ! Total flux subtracted in 200 components = 0.0136327 Jy ! Clean residual min=-0.003025 max=0.004204 Jy/beam ! Clean residual mean=-0.000007 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.195849 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 56 components and 0.195849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057740Jy sigma=0.928128 ! Fit after self-cal, rms=0.057618Jy sigma=0.925998 ! Inverting map ! Added new window around map position (17.4, -35.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380179 Jy ! Component: 100 - total flux cleaned = 0.00563745 Jy ! Component: 150 - total flux cleaned = 0.0068807 Jy ! Component: 200 - total flux cleaned = 0.00762221 Jy ! Total flux subtracted in 200 components = 0.00762221 Jy ! Clean residual min=-0.002995 max=0.003571 Jy/beam ! Clean residual mean=-0.000004 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.203471 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 78 components and 0.203471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057317Jy sigma=0.920170 ! Fit after self-cal, rms=0.057287Jy sigma=0.919732 ! Inverting map ! Added new window around map position (29.8, -31.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370813 Jy ! Component: 100 - total flux cleaned = 0.00556574 Jy ! Component: 150 - total flux cleaned = 0.00663248 Jy ! Component: 200 - total flux cleaned = 0.0076331 Jy ! Total flux subtracted in 200 components = 0.0076331 Jy ! Clean residual min=-0.003106 max=0.002655 Jy/beam ! Clean residual mean=-0.000002 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.211104 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 109 components and 0.211104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057018Jy sigma=0.914136 ! Fit after self-cal, rms=0.056987Jy sigma=0.913697 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9137 x 1.597 at -14.65 degrees (North through East) ! Clean map min=-0.0021143 max=0.12438 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.91 KP 1.04 ! LA 1.01 MK 1.04 NL 1.15 OV 0.97 ! PT 0.95 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.98 HN 1.00 KP 1.03 ! MK 0.98 NL 0.94 OV 1.01 PT 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 HN 0.94 KP 1.00 LA 0.97 ! MK 0.84 NL 0.94 OV 0.92 PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 0.91 KP 1.06 ! LA 1.01 MK 1.06 NL 1.13 OV 0.95 ! PT 0.96 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.96 HN 1.04 KP 1.01 ! MK 0.98 NL 0.93 OV 1.03 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 0.92 KP 0.98 LA 1.01 ! MK 0.87 NL 0.99 OV 0.92 PT 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.93 KP 1.04 ! LA 1.01 MK 1.05 NL 1.14 OV 0.96 ! PT 0.95 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 1.00 KP 1.00 ! MK 0.99 NL 0.94 OV 1.02 PT 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 HN 0.91 KP 1.05 LA 1.00 ! MK 0.80 NL 0.95 OV 0.94 PT 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 0.92 KP 1.05 ! LA 1.02 MK 1.05 NL 1.14 OV 0.95 ! PT 0.94 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 HN 0.99 KP 0.99 ! MK 1.00 NL 0.94 OV 1.02 PT 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 HN 0.99 KP 0.97 LA 1.01 ! MK 0.83 NL 0.99 OV 0.94 PT 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.91 KP 1.05 ! LA 1.01 MK 1.06 NL 1.14 OV 0.95 ! PT 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 1.00 KP 1.02 ! MK 1.01 NL 0.94 OV 1.01 PT 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 0.98 KP 0.97 LA 1.01 ! MK 0.86 NL 0.99 OV 0.95 PT 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.93 KP 1.05 ! LA 1.02 MK 1.05 NL 1.15 OV 0.97 ! PT 0.95 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.98 HN 1.00 KP 1.01 ! MK 1.01 NL 0.94 OV 1.02 PT 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 HN 0.96 KP 1.02 LA 0.98 ! MK 0.81 NL 0.98 OV 0.95 PT 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.93 KP 1.05 ! LA 1.01 MK 1.05 NL 1.14 OV 0.95 ! PT 0.95 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.98 HN 0.99 KP 1.01 ! MK 0.98 NL 0.94 OV 1.01 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 0.97 KP 1.02 LA 0.99 ! MK 0.81 NL 0.97 OV 0.94 PT 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.92 KP 1.06 ! LA 1.01 MK 1.06 NL 1.15 OV 0.96 ! PT 0.96 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.97 HN 0.99 KP 1.03 ! MK 0.99 NL 0.92 OV 1.02 PT 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 HN 0.93 KP 1.00 LA 0.99 ! MK 0.78 NL 0.97 OV 0.96 PT 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.91 KP 1.05 ! LA 1.01 MK 1.05 NL 1.14 OV 0.95 ! PT 0.95 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.99 HN 0.96 KP 1.02 ! MK 1.00 NL 0.96 OV 1.02 PT 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.02 HN 0.96 KP 0.96 LA 1.06 ! MK 0.82 NL 0.95 OV 0.93 PT 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.92 KP 1.05 ! LA 1.01 MK 1.03 NL 1.16 OV 0.95 ! PT 0.96 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.96 HN 0.97 KP 1.01 ! MK 0.99 NL 0.96 OV 1.04 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 HN 0.88 KP 1.01 LA 1.00 ! MK 0.84 NL 0.97 OV 0.91 PT 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.91 KP 1.03 ! LA 1.00 MK 1.04 NL 1.17 OV 0.95 ! PT 0.96 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.96 HN 0.98 KP 1.01 ! MK 0.97 NL 0.95 OV 1.01 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HN 0.95 KP 0.97 LA 1.01 ! MK 0.77 NL 1.00 OV 0.97 PT 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.91 KP 1.04 ! LA 1.02 MK 1.06 NL 1.17 OV 0.95 ! PT 0.95 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.95 HN 0.97 KP 1.01 ! MK 1.00 NL 0.97 OV 1.03 PT 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 HN 0.97 KP 1.02 LA 1.01 ! MK 0.82 NL 0.95 OV 0.93 PT 1.03 ! ! ! Fit before self-cal, rms=0.056987Jy sigma=0.913697 ! Fit after self-cal, rms=0.055368Jy sigma=0.894186 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.915 mas, bmaj=1.583 mas, bpa=-14.63 degrees ! Estimated noise=0.128308 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025305 Jy ! Component: 100 - total flux cleaned = 0.00328549 Jy ! Component: 150 - total flux cleaned = 0.00411704 Jy ! Component: 200 - total flux cleaned = 0.00486974 Jy ! Total flux subtracted in 200 components = 0.00486974 Jy ! Clean residual min=-0.002674 max=0.002257 Jy/beam ! Clean residual mean=-0.000003 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.215974 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 135 components and 0.215974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055200Jy sigma=0.891160 ! Fit after self-cal, rms=0.055187Jy sigma=0.890750 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055187Jy sigma=0.890750 ! Fit after self-cal, rms=0.053683Jy sigma=0.879612 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9154 mas, bmaj=1.551 mas, bpa=-13.81 degrees ! Estimated noise=0.1272 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116317 Jy ! Component: 100 - total flux cleaned = 0.00193171 Jy ! Component: 150 - total flux cleaned = 0.00264358 Jy ! Component: 200 - total flux cleaned = 0.00323172 Jy ! Total flux subtracted in 200 components = 0.00323172 Jy ! Clean residual min=-0.002367 max=0.002191 Jy/beam ! Clean residual mean=-0.000002 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.219206 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 148 components and 0.219206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053587Jy sigma=0.877928 ! Fit after self-cal, rms=0.053582Jy sigma=0.877674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.4, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206451 Jy ! Component: 100 - total flux cleaned = 0.00264412 Jy ! Component: 150 - total flux cleaned = 0.00335687 Jy ! Component: 200 - total flux cleaned = 0.00399979 Jy ! Total flux subtracted in 200 components = 0.00399979 Jy ! Clean residual min=-0.002235 max=0.001293 Jy/beam ! Clean residual mean=-0.000003 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.223205 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 165 components and 0.223205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053480Jy sigma=0.875683 ! Fit after self-cal, rms=0.053471Jy sigma=0.875561 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053471Jy sigma=0.875561 ! Fit after self-cal, rms=0.052890Jy sigma=0.867560 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9124 mas, bmaj=1.539 mas, bpa=-13.49 degrees ! Estimated noise=0.12655 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000546148 Jy ! Component: 100 - total flux cleaned = 0.000983919 Jy ! Component: 150 - total flux cleaned = 0.00156466 Jy ! Component: 200 - total flux cleaned = 0.00211952 Jy ! Total flux subtracted in 200 components = 0.00211952 Jy ! Clean residual min=-0.001811 max=0.000990 Jy/beam ! Clean residual mean=-0.000002 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.225325 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 181 components and 0.225325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052836Jy sigma=0.866630 ! Fit after self-cal, rms=0.052842Jy sigma=0.866470 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012535 Jy ! Component: 100 - total flux cleaned = 0.000573128 Jy ! Component: 150 - total flux cleaned = 0.00106289 Jy ! Component: 200 - total flux cleaned = 0.00151492 Jy ! Total flux subtracted in 200 components = 0.00151492 Jy ! Clean residual min=-0.001744 max=0.000974 Jy/beam ! Clean residual mean=-0.000003 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.22684 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 190 components and 0.22684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052810Jy sigma=0.865925 ! Fit after self-cal, rms=0.052805Jy sigma=0.865844 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052805Jy sigma=0.865844 ! Fit after self-cal, rms=0.052660Jy sigma=0.865777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.202 mas, bmaj=2.619 mas, bpa=-13.88 degrees ! Estimated noise=0.161039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141182 Jy ! Component: 100 - total flux cleaned = 0.00243365 Jy ! Component: 150 - total flux cleaned = 0.00325507 Jy ! Component: 200 - total flux cleaned = 0.00394525 Jy ! Total flux subtracted in 200 components = 0.00394525 Jy ! Clean residual min=-0.001004 max=0.001521 Jy/beam ! Clean residual mean=-0.000005 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.230785 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 217 components and 0.230785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052646Jy sigma=0.865502 ! Fit after self-cal, rms=0.052643Jy sigma=0.865434 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22.4, -35.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130568 Jy ! Component: 100 - total flux cleaned = 0.00209347 Jy ! Component: 150 - total flux cleaned = 0.00275902 Jy ! Component: 200 - total flux cleaned = 0.00328802 Jy ! Total flux subtracted in 200 components = 0.00328802 Jy ! Clean residual min=-0.001083 max=0.000855 Jy/beam ! Clean residual mean=-0.000003 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.234073 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 260 components and 0.234073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052631Jy sigma=0.865187 ! Fit after self-cal, rms=0.052629Jy sigma=0.865157 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9115 mas, bmaj=1.533 mas, bpa=-13.26 degrees ! Estimated noise=0.126249 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9115 x 1.533 at -13.26 degrees (North through East) ! Clean map min=-0.00063704 max=0.11937 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6819 mas, bmaj=1.154 mas, bpa=-6.282 degrees ! Estimated noise=0.320441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0945702 Jy ! Component: 100 - total flux cleaned = 0.136792 Jy ! Component: 150 - total flux cleaned = 0.157422 Jy ! Component: 200 - total flux cleaned = 0.168287 Jy ! Total flux subtracted in 200 components = 0.168287 Jy ! Clean residual min=-0.001972 max=0.005218 Jy/beam ! Clean residual mean=0.000001 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.168287 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.168287 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9115 mas, bmaj=1.533 mas, bpa=-13.26 degrees ! Estimated noise=0.126249 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00976659 Jy ! Component: 100 - total flux cleaned = 0.0165058 Jy ! Component: 150 - total flux cleaned = 0.0216348 Jy ! Component: 200 - total flux cleaned = 0.0259108 Jy ! Total flux subtracted in 200 components = 0.0259108 Jy ! Clean residual min=-0.001588 max=0.002805 Jy/beam ! Clean residual mean=-0.000001 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.194198 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 64 components and 0.194198 Jy ! Inverting map ! Added new window around map position (-0.4, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370303 Jy ! Component: 100 - total flux cleaned = 0.00690916 Jy ! Component: 150 - total flux cleaned = 0.00973549 Jy ! Component: 200 - total flux cleaned = 0.0122514 Jy ! Total flux subtracted in 200 components = 0.0122514 Jy ! Clean residual min=-0.001157 max=0.001845 Jy/beam ! Clean residual mean=-0.000001 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.20645 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 103 components and 0.20645 Jy ! Inverting map ! Added new window around map position (0.4, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230998 Jy ! Component: 100 - total flux cleaned = 0.00437766 Jy ! Component: 150 - total flux cleaned = 0.00625077 Jy ! Component: 200 - total flux cleaned = 0.0079522 Jy ! Total flux subtracted in 200 components = 0.0079522 Jy ! Clean residual min=-0.000919 max=0.001198 Jy/beam ! Clean residual mean=-0.000002 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.214402 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 129 components and 0.214402 Jy ! Inverting map ! Added new window around map position (31.4, -33.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015719 Jy ! Component: 100 - total flux cleaned = 0.00301076 Jy ! Component: 150 - total flux cleaned = 0.00428866 Jy ! Component: 200 - total flux cleaned = 0.00532868 Jy ! Total flux subtracted in 200 components = 0.00532868 Jy ! Clean residual min=-0.000826 max=0.000991 Jy/beam ! Clean residual mean=-0.000002 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.21973 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 160 components and 0.219731 Jy ! Inverting map ! Added new window around map position (28.2, -31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000963443 Jy ! Component: 100 - total flux cleaned = 0.00176034 Jy ! Component: 150 - total flux cleaned = 0.00255723 Jy ! Component: 200 - total flux cleaned = 0.00331089 Jy ! Total flux subtracted in 200 components = 0.00331089 Jy ! Clean residual min=-0.000755 max=0.000817 Jy/beam ! Clean residual mean=-0.000002 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.223041 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 179 components and 0.223041 Jy ! Inverting map ! Added new window around map position (3.8, -13.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000741641 Jy ! Component: 100 - total flux cleaned = 0.00138953 Jy ! Component: 150 - total flux cleaned = 0.00204029 Jy ! Component: 200 - total flux cleaned = 0.00259557 Jy ! Total flux subtracted in 200 components = 0.00259557 Jy ! Clean residual min=-0.000699 max=0.000651 Jy/beam ! Clean residual mean=-0.000002 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.225637 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 208 components and 0.225637 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.202 mas, bmaj=2.619 mas, bpa=-13.88 degrees ! Estimated noise=0.161039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148874 Jy ! Component: 100 - total flux cleaned = 0.00271778 Jy ! Component: 150 - total flux cleaned = 0.00379599 Jy ! Component: 200 - total flux cleaned = 0.00475542 Jy ! Total flux subtracted in 200 components = 0.00475542 Jy ! Clean residual min=-0.000728 max=0.000876 Jy/beam ! Clean residual mean=-0.000002 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.230392 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000862482 Jy ! Component: 100 - total flux cleaned = 0.00164176 Jy ! Component: 150 - total flux cleaned = 0.00234992 Jy ! Component: 200 - total flux cleaned = 0.00299629 Jy ! Total flux subtracted in 200 components = 0.00299629 Jy ! Clean residual min=-0.000703 max=0.000793 Jy/beam ! Clean residual mean=-0.000001 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.233389 Jy ! Adding 141 model components to the UV plane model. ! The established model now contains 314 components and 0.233389 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9115 mas, bmaj=1.533 mas, bpa=-13.26 degrees ! Estimated noise=0.126249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.93015e-06 Jy ! Component: 100 - total flux cleaned = 0.000120742 Jy ! Component: 150 - total flux cleaned = 0.000213895 Jy ! Component: 200 - total flux cleaned = 0.000301365 Jy ! Total flux subtracted in 200 components = 0.000301365 Jy ! Clean residual min=-0.000615 max=0.000603 Jy/beam ! Clean residual mean=-0.000001 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.23369 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 328 components and 0.23369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052535Jy sigma=0.863775 ! Fit after self-cal, rms=0.052479Jy sigma=0.863031 wmodel J0932+6507_X_map.mod ! Writing 328 model components to file: J0932+6507_X_map.mod wobs J0932+6507_X_uvs.fits ! Writing UV FITS file: J0932+6507_X_uvs.fits wwins J0932+6507_X_map.win ! wwins: Wrote 12 windows to J0932+6507_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.84466e-05 Jy ! Component: 100 - total flux cleaned = -0.00013128 Jy ! Component: 150 - total flux cleaned = -0.000191568 Jy ! Component: 200 - total flux cleaned = -0.000230949 Jy ! Component: 250 - total flux cleaned = -0.00026953 Jy ! Component: 300 - total flux cleaned = -0.000307184 Jy ! Component: 350 - total flux cleaned = -0.000325742 Jy ! Component: 400 - total flux cleaned = -0.000352769 Jy ! Component: 450 - total flux cleaned = -0.000343628 Jy ! Component: 500 - total flux cleaned = -0.000325945 Jy ! Component: 550 - total flux cleaned = -0.000299981 Jy ! Component: 600 - total flux cleaned = -0.000283065 Jy ! Component: 650 - total flux cleaned = -0.000283284 Jy ! Component: 700 - total flux cleaned = -0.000325046 Jy ! Component: 750 - total flux cleaned = -0.000308457 Jy ! Component: 800 - total flux cleaned = -0.000292201 Jy ! Component: 850 - total flux cleaned = -0.000316711 Jy ! Component: 900 - total flux cleaned = -0.000340869 Jy ! Component: 950 - total flux cleaned = -0.000324868 Jy ! Component: 1000 - total flux cleaned = -0.00032491 Jy ! Component: 1050 - total flux cleaned = -0.000301429 Jy ! Component: 1100 - total flux cleaned = -0.000293667 Jy ! Component: 1150 - total flux cleaned = -0.00030149 Jy ! Component: 1200 - total flux cleaned = -0.000309087 Jy ! Component: 1250 - total flux cleaned = -0.00029385 Jy ! Component: 1300 - total flux cleaned = -0.000286504 Jy ! Component: 1350 - total flux cleaned = -0.000316429 Jy ! Component: 1400 - total flux cleaned = -0.000301591 Jy ! Component: 1450 - total flux cleaned = -0.000316351 Jy ! Component: 1500 - total flux cleaned = -0.000323656 Jy ! Component: 1550 - total flux cleaned = -0.000330912 Jy ! Component: 1600 - total flux cleaned = -0.00033822 Jy ! Component: 1650 - total flux cleaned = -0.000366937 Jy ! Component: 1700 - total flux cleaned = -0.000352664 Jy ! Component: 1750 - total flux cleaned = -0.00037397 Jy ! Component: 1800 - total flux cleaned = -0.000388157 Jy ! Component: 1850 - total flux cleaned = -0.000395221 Jy ! Component: 1900 - total flux cleaned = -0.000409153 Jy ! Component: 1950 - total flux cleaned = -0.000429953 Jy ! Component: 2000 - total flux cleaned = -0.000423105 Jy ! Component: 2050 - total flux cleaned = -0.000429936 Jy ! Component: 2100 - total flux cleaned = -0.000443645 Jy ! Component: 2150 - total flux cleaned = -0.000457185 Jy ! Component: 2200 - total flux cleaned = -0.000463956 Jy ! Component: 2250 - total flux cleaned = -0.00047067 Jy ! Component: 2300 - total flux cleaned = -0.000484037 Jy ! Component: 2350 - total flux cleaned = -0.000510471 Jy ! Component: 2400 - total flux cleaned = -0.000503902 Jy ! Component: 2450 - total flux cleaned = -0.000484168 Jy ! Component: 2500 - total flux cleaned = -0.000523384 Jy ! Component: 2550 - total flux cleaned = -0.000510462 Jy ! Component: 2600 - total flux cleaned = -0.000523366 Jy ! Component: 2650 - total flux cleaned = -0.000529788 Jy ! Component: 2700 - total flux cleaned = -0.000548986 Jy ! Component: 2750 - total flux cleaned = -0.000555372 Jy ! Component: 2800 - total flux cleaned = -0.000555356 Jy ! Component: 2850 - total flux cleaned = -0.000511106 Jy ! Component: 2900 - total flux cleaned = -0.000523676 Jy ! Component: 2950 - total flux cleaned = -0.000554942 Jy ! Component: 3000 - total flux cleaned = -0.000561134 Jy ! Component: 3050 - total flux cleaned = -0.000548695 Jy ! Component: 3100 - total flux cleaned = -0.00054255 Jy ! Component: 3150 - total flux cleaned = -0.000536408 Jy ! Component: 3200 - total flux cleaned = -0.000536387 Jy ! Component: 3250 - total flux cleaned = -0.000524188 Jy ! Component: 3300 - total flux cleaned = -0.000566736 Jy ! Component: 3350 - total flux cleaned = -0.000554641 Jy ! Component: 3400 - total flux cleaned = -0.000548622 Jy ! Component: 3450 - total flux cleaned = -0.000554622 Jy ! Component: 3500 - total flux cleaned = -0.000548669 Jy ! Component: 3550 - total flux cleaned = -0.000560589 Jy ! Component: 3600 - total flux cleaned = -0.000554624 Jy ! Component: 3650 - total flux cleaned = -0.000560522 Jy ! Component: 3700 - total flux cleaned = -0.000560526 Jy ! Component: 3750 - total flux cleaned = -0.000566375 Jy ! Component: 3800 - total flux cleaned = -0.000578063 Jy ! Component: 3850 - total flux cleaned = -0.000554824 Jy ! Component: 3900 - total flux cleaned = -0.000566384 Jy ! Component: 3950 - total flux cleaned = -0.00059524 Jy ! Component: 4000 - total flux cleaned = -0.000606742 Jy ! Component: 4050 - total flux cleaned = -0.000583834 Jy ! Total flux subtracted in 4096 components = -0.000566694 Jy ! Clean residual min=-0.000349 max=0.000286 Jy/beam ! Clean residual mean=-0.000000 rms=0.000099 Jy/beam ! Combined flux in latest and established models = 0.233123 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 649 components and 0.233123 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0932+6507_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9115 x 1.533 at -13.26 degrees (North through East) ! Clean map min=-0.00050702 max=0.11889 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0932+6507_X_map.fits wmodel /vlbi/bp222/temp_maps//J0932+6507_X_map.mod ! Writing 649 model components to file: /vlbi/bp222/temp_maps//J0932+6507_X_map.mod wobs /vlbi/bp222/temp_maps//J0932+6507_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0932+6507_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0932+6507_X_map.win ! wwins: Wrote 13 windows to /vlbi/bp222/temp_maps//J0932+6507_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.11889 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.9225e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.250378 0.250378 0.500756 1.00151 2.00302 4.00604 8.01209 16.0242 32.0484 64.0967 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.118 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1198.19 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0932+6507_X_dfm.log closed on Thu Feb 14 22:46:11 2019