! Started logfile: /vlbi/bp222/temp_maps//J0928-3049_X_dfm.log on Thu Feb 14 22:45:40 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0928-3049_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0928-3049_X_uvm.fits ! AN table 1: 110 integrations on 45 of 45 possible baselines. ! AN table 2: 44 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.853122 visibilities/baseline/integration-bin. ! Found source: J0928-3049 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 63288 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0928-3049_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 109 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 109 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 109 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 109 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 109 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 109 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 109 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 109 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 109 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 109 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 109 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.009349Jy sigma=13.242780 ! Fit after self-cal, rms=0.889538Jy sigma=11.416455 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6469 mas, bmaj=1.902 mas, bpa=-5.655 degrees ! Estimated noise=0.614962 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.081013 Jy ! Component: 100 - total flux cleaned = 0.109623 Jy ! Total flux subtracted in 100 components = 0.109623 Jy ! Clean residual min=-0.004595 max=0.014933 Jy/beam ! Clean residual mean=0.000007 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.109623 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.109623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087026Jy sigma=1.010522 ! Fit after self-cal, rms=0.086417Jy sigma=1.008304 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167557 Jy ! Component: 100 - total flux cleaned = 0.0272335 Jy ! Total flux subtracted in 100 components = 0.0272335 Jy ! Clean residual min=-0.003641 max=0.008293 Jy/beam ! Clean residual mean=0.000005 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.136856 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.136856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081746Jy sigma=0.893172 ! Fit after self-cal, rms=0.081628Jy sigma=0.892835 ! Inverting map ! Added new window around map position (-1, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0082083 Jy ! Component: 100 - total flux cleaned = 0.01346 Jy ! Total flux subtracted in 100 components = 0.01346 Jy ! Clean residual min=-0.003122 max=0.007480 Jy/beam ! Clean residual mean=0.000004 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.150316 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.150316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080406Jy sigma=0.862804 ! Fit after self-cal, rms=0.080412Jy sigma=0.862045 ! Inverting map ! Added new window around map position (1.4, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00685622 Jy ! Component: 100 - total flux cleaned = 0.0112122 Jy ! Total flux subtracted in 100 components = 0.0112122 Jy ! Clean residual min=-0.003001 max=0.004554 Jy/beam ! Clean residual mean=0.000004 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.161529 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.161529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079489Jy sigma=0.846038 ! Fit after self-cal, rms=0.079424Jy sigma=0.845373 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9023 mas, bmaj=2.675 mas, bpa=-8.128 degrees ! Estimated noise=0.233304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00572973 Jy ! Component: 100 - total flux cleaned = 0.00870228 Jy ! Component: 150 - total flux cleaned = 0.0104412 Jy ! Component: 200 - total flux cleaned = 0.0112064 Jy ! Total flux subtracted in 200 components = 0.0112064 Jy ! Clean residual min=-0.002489 max=0.002889 Jy/beam ! Clean residual mean=0.000004 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.172735 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 43 components and 0.172735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079035Jy sigma=0.838485 ! Fit after self-cal, rms=0.078996Jy sigma=0.838177 ! Inverting map ! Added new window around map position (-4.8, 21.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260388 Jy ! Component: 100 - total flux cleaned = 0.00350249 Jy ! Component: 150 - total flux cleaned = 0.00354481 Jy ! Component: 200 - total flux cleaned = 0.00354764 Jy ! Total flux subtracted in 200 components = 0.00354764 Jy ! Clean residual min=-0.002362 max=0.002110 Jy/beam ! Clean residual mean=0.000005 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.176283 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 0.176283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078892Jy sigma=0.836842 ! Fit after self-cal, rms=0.078877Jy sigma=0.836645 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9023 x 2.675 at -8.128 degrees (North through East) ! Clean map min=-0.0021801 max=0.11077 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.12 KP 1.02 ! LA 1.03 MK 0.97 NL 1.05 OV 0.95 ! PT 0.98 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.98 HN 1.40 KP 1.03 ! MK 1.07 NL 0.96 OV 1.02 PT 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.17 KP 1.01 ! LA 1.03 MK 0.99 NL 1.04 OV 0.93 ! PT 0.96 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 HN 1.32 KP 1.02 ! MK 1.03 NL 0.93 OV 1.02 PT 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.16 KP 1.01 ! LA 1.00 MK 1.00 NL 1.07 OV 0.94 ! PT 0.96 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.01 HN 1.43 KP 1.03 ! MK 1.04 NL 0.96 OV 1.00 PT 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.12 KP 1.01 ! LA 1.00 MK 0.97 NL 1.04 OV 0.91 ! PT 0.97 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.03 HN 1.36 KP 1.01 ! MK 1.05 NL 0.98 OV 1.01 PT 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.17 KP 1.00 ! LA 1.02 MK 0.97 NL 1.04 OV 0.93 ! PT 0.95 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 HN 1.15 KP 1.06 ! MK 1.08 NL 0.94 OV 1.01 PT 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.06 KP 0.99 ! LA 0.99 MK 0.97 NL 1.04 OV 0.92 ! PT 0.94 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.04 HN 1.21 KP 1.02 ! MK 1.08 NL 0.93 OV 0.98 PT 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.18 KP 1.02 ! LA 1.03 MK 0.98 NL 1.06 OV 0.91 ! PT 0.97 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 HN 1.40 KP 1.01 ! MK 1.02 NL 0.96 OV 1.06 PT 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.12 KP 1.00 ! LA 1.00 MK 0.94 NL 1.04 OV 0.93 ! PT 0.97 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 1.45 KP 1.04 ! MK 1.04 NL 0.96 OV 1.01 PT 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.05 KP 1.01 ! LA 1.03 MK 0.96 NL 1.04 OV 0.90 ! PT 0.96 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.96 HN 1.32 KP 1.08 ! MK 1.07 NL 0.92 OV 1.01 PT 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.05 KP 1.02 ! LA 1.02 MK 0.93 NL 1.02 OV 0.89 ! PT 0.96 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 1.29 KP 1.03 ! MK 1.02 NL 0.94 OV 1.05 PT 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.13 KP 1.02 ! LA 0.99 MK 0.93 NL 1.08 OV 0.93 ! PT 0.94 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.98 HN 1.26 KP 1.04 ! MK 1.03 NL 0.92 OV 1.04 PT 1.05 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.05 KP 0.99 ! LA 1.02 MK 0.93 NL 1.01 OV 0.94 ! PT 0.95 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HN 1.19 KP 1.03 ! MK 0.98 NL 0.96 OV 1.00 PT 1.02 ! ! ! Fit before self-cal, rms=0.078877Jy sigma=0.836645 ! Fit after self-cal, rms=0.084257Jy sigma=0.829601 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9071 mas, bmaj=2.669 mas, bpa=-8.223 degrees ! Estimated noise=0.235429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00188792 Jy ! Component: 100 - total flux cleaned = -0.00219889 Jy ! Component: 150 - total flux cleaned = -0.00230268 Jy ! Component: 200 - total flux cleaned = -0.00242466 Jy ! Total flux subtracted in 200 components = -0.00242466 Jy ! Clean residual min=-0.002149 max=0.001686 Jy/beam ! Clean residual mean=0.000002 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.173858 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 78 components and 0.173858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084195Jy sigma=0.828855 ! Fit after self-cal, rms=0.084205Jy sigma=0.828663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084205Jy sigma=0.828663 ! Fit after self-cal, rms=0.085687Jy sigma=0.823920 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9108 mas, bmaj=2.667 mas, bpa=-8.087 degrees ! Estimated noise=0.235936 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100764 Jy ! Component: 100 - total flux cleaned = -0.00111222 Jy ! Component: 150 - total flux cleaned = -0.0012552 Jy ! Component: 200 - total flux cleaned = -0.00142419 Jy ! Total flux subtracted in 200 components = -0.00142419 Jy ! Clean residual min=-0.001327 max=0.001418 Jy/beam ! Clean residual mean=-0.000000 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.172434 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 0.172434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085645Jy sigma=0.823574 ! Fit after self-cal, rms=0.085678Jy sigma=0.823443 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010351 Jy ! Component: 100 - total flux cleaned = 0.00143827 Jy ! Component: 150 - total flux cleaned = 0.00143947 Jy ! Component: 200 - total flux cleaned = 0.00144019 Jy ! Total flux subtracted in 200 components = 0.00144019 Jy ! Clean residual min=-0.001162 max=0.001118 Jy/beam ! Clean residual mean=-0.000000 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.173874 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 103 components and 0.173874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085648Jy sigma=0.823069 ! Fit after self-cal, rms=0.085644Jy sigma=0.823030 ! Inverting map ! Added new window around map position (1.4, -5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000828929 Jy ! Component: 100 - total flux cleaned = 0.00104578 Jy ! Component: 150 - total flux cleaned = 0.0010236 Jy ! Component: 200 - total flux cleaned = 0.00104442 Jy ! Total flux subtracted in 200 components = 0.00104442 Jy ! Clean residual min=-0.001139 max=0.001039 Jy/beam ! Clean residual mean=-0.000000 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.174918 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 115 components and 0.174918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085621Jy sigma=0.822783 ! Fit after self-cal, rms=0.085624Jy sigma=0.822740 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085624Jy sigma=0.822740 ! Fit after self-cal, rms=0.086767Jy sigma=0.820185 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9117 mas, bmaj=2.67 mas, bpa=-8.112 degrees ! Estimated noise=0.235811 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000207411 Jy ! Component: 100 - total flux cleaned = -6.16223e-05 Jy ! Component: 150 - total flux cleaned = 3.96192e-05 Jy ! Component: 200 - total flux cleaned = 7.52628e-05 Jy ! Total flux subtracted in 200 components = 7.52628e-05 Jy ! Clean residual min=-0.000876 max=0.000892 Jy/beam ! Clean residual mean=-0.000001 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.174994 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 129 components and 0.174994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086751Jy sigma=0.820002 ! Fit after self-cal, rms=0.086784Jy sigma=0.819943 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-38.4, -15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000539056 Jy ! Component: 100 - total flux cleaned = 0.000809104 Jy ! Component: 150 - total flux cleaned = 0.000877265 Jy ! Component: 200 - total flux cleaned = 0.000942103 Jy ! Total flux subtracted in 200 components = 0.000942103 Jy ! Clean residual min=-0.000842 max=0.000869 Jy/beam ! Clean residual mean=-0.000001 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.175936 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 144 components and 0.175936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086770Jy sigma=0.819833 ! Fit after self-cal, rms=0.086769Jy sigma=0.819816 ! Inverting map ! Added new window around map position (6.2, 47.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405982 Jy ! Component: 100 - total flux cleaned = 0.000403069 Jy ! Component: 150 - total flux cleaned = 0.000493435 Jy ! Component: 200 - total flux cleaned = 0.000559793 Jy ! Total flux subtracted in 200 components = 0.000559793 Jy ! Clean residual min=-0.000826 max=0.000849 Jy/beam ! Clean residual mean=-0.000001 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.176496 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 158 components and 0.176496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086752Jy sigma=0.819714 ! Fit after self-cal, rms=0.086754Jy sigma=0.819705 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086754Jy sigma=0.819705 ! Fit after self-cal, rms=0.087063Jy sigma=0.819650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.357 mas, bmaj=6.661 mas, bpa=-1.892 degrees ! Estimated noise=0.260302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263299 Jy ! Component: 100 - total flux cleaned = 0.000400495 Jy ! Component: 150 - total flux cleaned = 0.00047245 Jy ! Component: 200 - total flux cleaned = 0.000484628 Jy ! Total flux subtracted in 200 components = 0.000484628 Jy ! Clean residual min=-0.000654 max=0.000857 Jy/beam ! Clean residual mean=-0.000002 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.17698 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 173 components and 0.17698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087058Jy sigma=0.819588 ! Fit after self-cal, rms=0.087065Jy sigma=0.819580 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123028 Jy ! Component: 100 - total flux cleaned = 0.00013491 Jy ! Component: 150 - total flux cleaned = 0.000124082 Jy ! Component: 200 - total flux cleaned = 0.000144799 Jy ! Total flux subtracted in 200 components = 0.000144799 Jy ! Clean residual min=-0.000648 max=0.000846 Jy/beam ! Clean residual mean=-0.000002 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.177125 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 177 components and 0.177125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087062Jy sigma=0.819555 ! Fit after self-cal, rms=0.087063Jy sigma=0.819555 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9126 mas, bmaj=2.669 mas, bpa=-8.08 degrees ! Estimated noise=0.23569 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9126 x 2.669 at -8.08 degrees (North through East) ! Clean map min=-0.00076673 max=0.11205 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6475 mas, bmaj=1.886 mas, bpa=-5.327 degrees ! Estimated noise=0.627622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0824641 Jy ! Component: 100 - total flux cleaned = 0.112688 Jy ! Component: 150 - total flux cleaned = 0.129199 Jy ! Component: 200 - total flux cleaned = 0.139757 Jy ! Total flux subtracted in 200 components = 0.139757 Jy ! Clean residual min=-0.002869 max=0.006043 Jy/beam ! Clean residual mean=0.000002 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.139757 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.139757 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9126 mas, bmaj=2.669 mas, bpa=-8.08 degrees ! Estimated noise=0.23569 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126649 Jy ! Component: 100 - total flux cleaned = 0.0192854 Jy ! Component: 150 - total flux cleaned = 0.0230712 Jy ! Component: 200 - total flux cleaned = 0.0255545 Jy ! Total flux subtracted in 200 components = 0.0255545 Jy ! Clean residual min=-0.001261 max=0.002250 Jy/beam ! Clean residual mean=-0.000002 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.165312 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 51 components and 0.165312 Jy ! Inverting map ! Added new window around map position (-1.2, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220218 Jy ! Component: 100 - total flux cleaned = 0.00380506 Jy ! Component: 150 - total flux cleaned = 0.00515386 Jy ! Component: 200 - total flux cleaned = 0.00631673 Jy ! Total flux subtracted in 200 components = 0.00631673 Jy ! Clean residual min=-0.001000 max=0.001174 Jy/beam ! Clean residual mean=-0.000001 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.171629 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 77 components and 0.171629 Jy ! Inverting map ! Added new window around map position (0.6, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011501 Jy ! Component: 100 - total flux cleaned = 0.00194553 Jy ! Component: 150 - total flux cleaned = 0.0024916 Jy ! Component: 200 - total flux cleaned = 0.00289895 Jy ! Total flux subtracted in 200 components = 0.00289895 Jy ! Clean residual min=-0.000870 max=0.000871 Jy/beam ! Clean residual mean=-0.000001 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.174528 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 104 components and 0.174528 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.357 mas, bmaj=6.661 mas, bpa=-1.892 degrees ! Estimated noise=0.260302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000844307 Jy ! Component: 100 - total flux cleaned = 0.00138838 Jy ! Component: 150 - total flux cleaned = 0.00171568 Jy ! Component: 200 - total flux cleaned = 0.00189713 Jy ! Total flux subtracted in 200 components = 0.00189713 Jy ! Clean residual min=-0.000693 max=0.000852 Jy/beam ! Clean residual mean=-0.000002 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.176425 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011724 Jy ! Component: 100 - total flux cleaned = 0.000255944 Jy ! Component: 150 - total flux cleaned = 0.000355256 Jy ! Component: 200 - total flux cleaned = 0.000368709 Jy ! Total flux subtracted in 200 components = 0.000368709 Jy ! Clean residual min=-0.000703 max=0.000848 Jy/beam ! Clean residual mean=-0.000002 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.176793 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 150 components and 0.176793 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9126 mas, bmaj=2.669 mas, bpa=-8.08 degrees ! Estimated noise=0.23569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.51857e-05 Jy ! Component: 100 - total flux cleaned = -4.51796e-05 Jy ! Component: 150 - total flux cleaned = -2.61809e-05 Jy ! Component: 200 - total flux cleaned = -7.67277e-06 Jy ! Total flux subtracted in 200 components = -7.67277e-06 Jy ! Clean residual min=-0.000813 max=0.000811 Jy/beam ! Clean residual mean=-0.000001 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.176786 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 172 components and 0.176786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087079Jy sigma=0.819517 ! Fit after self-cal, rms=0.087069Jy sigma=0.819442 wmodel J0928-3049_X_map.mod ! Writing 172 model components to file: J0928-3049_X_map.mod wobs J0928-3049_X_uvs.fits ! Writing UV FITS file: J0928-3049_X_uvs.fits wwins J0928-3049_X_map.win ! wwins: Wrote 10 windows to J0928-3049_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.43195e-05 Jy ! Component: 100 - total flux cleaned = -2.83124e-05 Jy ! Component: 150 - total flux cleaned = -5.41802e-05 Jy ! Component: 200 - total flux cleaned = -2.91718e-05 Jy ! Component: 250 - total flux cleaned = 3.16713e-05 Jy ! Component: 300 - total flux cleaned = 7.87827e-05 Jy ! Component: 350 - total flux cleaned = 3.19546e-05 Jy ! Component: 400 - total flux cleaned = 5.51914e-05 Jy ! Component: 450 - total flux cleaned = 4.40926e-05 Jy ! Component: 500 - total flux cleaned = 6.6549e-05 Jy ! Component: 550 - total flux cleaned = 7.74253e-05 Jy ! Component: 600 - total flux cleaned = 8.81279e-05 Jy ! Component: 650 - total flux cleaned = 5.57453e-05 Jy ! Component: 700 - total flux cleaned = 7.71298e-05 Jy ! Component: 750 - total flux cleaned = 9.80695e-05 Jy ! Component: 800 - total flux cleaned = 0.000129234 Jy ! Component: 850 - total flux cleaned = 0.000119007 Jy ! Component: 900 - total flux cleaned = 0.000149557 Jy ! Component: 950 - total flux cleaned = 0.000129474 Jy ! Component: 1000 - total flux cleaned = 0.00016962 Jy ! Component: 1050 - total flux cleaned = 0.000139955 Jy ! Component: 1100 - total flux cleaned = 0.000159639 Jy ! Component: 1150 - total flux cleaned = 0.000188919 Jy ! Component: 1200 - total flux cleaned = 0.000227671 Jy ! Component: 1250 - total flux cleaned = 0.000198837 Jy ! Component: 1300 - total flux cleaned = 0.000246481 Jy ! Component: 1350 - total flux cleaned = 0.000284306 Jy ! Component: 1400 - total flux cleaned = 0.000274972 Jy ! Component: 1450 - total flux cleaned = 0.000284349 Jy ! Component: 1500 - total flux cleaned = 0.00028431 Jy ! Component: 1550 - total flux cleaned = 0.000339493 Jy ! Component: 1600 - total flux cleaned = 0.000339465 Jy ! Component: 1650 - total flux cleaned = 0.000312221 Jy ! Component: 1700 - total flux cleaned = 0.000330394 Jy ! Component: 1750 - total flux cleaned = 0.00033941 Jy ! Component: 1800 - total flux cleaned = 0.000348273 Jy ! Component: 1850 - total flux cleaned = 0.000401393 Jy ! Component: 1900 - total flux cleaned = 0.000418925 Jy ! Component: 1950 - total flux cleaned = 0.000462642 Jy ! Component: 2000 - total flux cleaned = 0.000445239 Jy ! Component: 2050 - total flux cleaned = 0.000479793 Jy ! Component: 2100 - total flux cleaned = 0.000488427 Jy ! Component: 2150 - total flux cleaned = 0.000496946 Jy ! Component: 2200 - total flux cleaned = 0.000539373 Jy ! Component: 2250 - total flux cleaned = 0.000547809 Jy ! Component: 2300 - total flux cleaned = 0.000522628 Jy ! Component: 2350 - total flux cleaned = 0.000522651 Jy ! Component: 2400 - total flux cleaned = 0.000572525 Jy ! Component: 2450 - total flux cleaned = 0.000597307 Jy ! Component: 2500 - total flux cleaned = 0.000613816 Jy ! Component: 2550 - total flux cleaned = 0.000597416 Jy ! Component: 2600 - total flux cleaned = 0.000646353 Jy ! Component: 2650 - total flux cleaned = 0.000662623 Jy ! Component: 2700 - total flux cleaned = 0.000670644 Jy ! Component: 2750 - total flux cleaned = 0.000718875 Jy ! Component: 2800 - total flux cleaned = 0.000710829 Jy ! Component: 2850 - total flux cleaned = 0.000710845 Jy ! Component: 2900 - total flux cleaned = 0.000726741 Jy ! Component: 2950 - total flux cleaned = 0.000734632 Jy ! Component: 3000 - total flux cleaned = 0.00078969 Jy ! Component: 3050 - total flux cleaned = 0.000805294 Jy ! Component: 3100 - total flux cleaned = 0.000820882 Jy ! Component: 3150 - total flux cleaned = 0.000851887 Jy ! Component: 3200 - total flux cleaned = 0.000882706 Jy ! Component: 3250 - total flux cleaned = 0.000898098 Jy ! Component: 3300 - total flux cleaned = 0.000928767 Jy ! Component: 3350 - total flux cleaned = 0.000921181 Jy ! Component: 3400 - total flux cleaned = 0.000981982 Jy ! Component: 3450 - total flux cleaned = 0.000989554 Jy ! Component: 3500 - total flux cleaned = 0.00101969 Jy ! Component: 3550 - total flux cleaned = 0.00109483 Jy ! Component: 3600 - total flux cleaned = 0.00108728 Jy ! Component: 3650 - total flux cleaned = 0.00108722 Jy ! Component: 3700 - total flux cleaned = 0.00110958 Jy ! Component: 3750 - total flux cleaned = 0.00115398 Jy ! Component: 3800 - total flux cleaned = 0.00116871 Jy ! Component: 3850 - total flux cleaned = 0.00116871 Jy ! Component: 3900 - total flux cleaned = 0.00119794 Jy ! Component: 3950 - total flux cleaned = 0.00118339 Jy ! Component: 4000 - total flux cleaned = 0.00121241 Jy ! Component: 4050 - total flux cleaned = 0.0012558 Jy ! Total flux subtracted in 4096 components = 0.00124861 Jy ! Clean residual min=-0.000422 max=0.000422 Jy/beam ! Clean residual mean=-0.000000 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.178034 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 470 components and 0.178034 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0928-3049_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9126 x 2.669 at -8.08 degrees (North through East) ! Clean map min=-0.0006993 max=0.11395 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0928-3049_X_map.fits wmodel /vlbi/bp222/temp_maps//J0928-3049_X_map.mod ! Writing 470 model components to file: /vlbi/bp222/temp_maps//J0928-3049_X_map.mod wobs /vlbi/bp222/temp_maps//J0928-3049_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0928-3049_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0928-3049_X_map.win ! wwins: Wrote 11 windows to /vlbi/bp222/temp_maps//J0928-3049_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.113951 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000127826 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.336531 0.336531 0.673062 1.34612 2.69225 5.38449 10.769 21.538 43.0759 86.1519 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.113 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 891.448 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0928-3049_X_dfm.log closed on Thu Feb 14 22:45:48 2019