! Started logfile: /vlbi/bp222/temp_maps//J0925-3547_X_dfm.log on Thu Feb 14 22:45:26 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0925-3547_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0925-3547_X_uvm.fits ! AN table 1: 68 integrations on 28 of 28 possible baselines. ! AN table 2: 24 integrations on 36 of 36 possible baselines. ! AN table 3: 24 integrations on 36 of 36 possible baselines. ! AN table 4: 46 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.893089 visibilities/baseline/integration-bin. ! Found source: J0925-3547 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 52728 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0925-3547_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 35 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.010984Jy sigma=11.952475 ! Fit after self-cal, rms=0.891001Jy sigma=10.406219 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6534 mas, bmaj=2.035 mas, bpa=-5.147 degrees ! Estimated noise=0.600968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0883032 Jy ! Component: 100 - total flux cleaned = 0.113624 Jy ! Total flux subtracted in 100 components = 0.113624 Jy ! Clean residual min=-0.010133 max=0.015471 Jy/beam ! Clean residual mean=0.000011 rms=0.001650 Jy/beam ! Combined flux in latest and established models = 0.113624 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.113624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092018Jy sigma=0.936934 ! Fit after self-cal, rms=0.091511Jy sigma=0.932838 ! Inverting map ! Added new window around map position (0.8, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123642 Jy ! Component: 100 - total flux cleaned = 0.0136999 Jy ! Total flux subtracted in 100 components = 0.0136999 Jy ! Clean residual min=-0.008927 max=0.009959 Jy/beam ! Clean residual mean=0.000018 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.127324 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.127324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089794Jy sigma=0.899149 ! Fit after self-cal, rms=0.089626Jy sigma=0.897837 ! Inverting map ! Added new window around map position (0.2, -3.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615098 Jy ! Component: 100 - total flux cleaned = 0.0059506 Jy ! Total flux subtracted in 100 components = 0.0059506 Jy ! Clean residual min=-0.007526 max=0.007369 Jy/beam ! Clean residual mean=0.000022 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.133274 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.133274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089079Jy sigma=0.887247 ! Fit after self-cal, rms=0.088999Jy sigma=0.886488 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8834 mas, bmaj=2.699 mas, bpa=-8.791 degrees ! Estimated noise=0.27731 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0056627 Jy ! Component: 100 - total flux cleaned = 0.00654519 Jy ! Component: 150 - total flux cleaned = 0.00664235 Jy ! Component: 200 - total flux cleaned = 0.00664731 Jy ! Total flux subtracted in 200 components = 0.00664731 Jy ! Clean residual min=-0.008012 max=0.006647 Jy/beam ! Clean residual mean=0.000024 rms=0.001661 Jy/beam ! Combined flux in latest and established models = 0.139922 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.139922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088684Jy sigma=0.880343 ! Fit after self-cal, rms=0.088640Jy sigma=0.880027 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8834 x 2.699 at -8.791 degrees (North through East) ! Clean map min=-0.0076992 max=0.09608 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.26 HN 0.93 KP 1.19 LA 1.28 ! NL 1.25 OV 1.34 PT 1.25 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.29 FD 0.92 HN 1.16 KP 1.00 ! LA 1.00 MK 1.14 NL 1.06 OV 0.84 ! SC 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.96 KP 1.00 LA 1.00 ! MK 1.12 NL 1.22 OV 0.87 PT 1.00 ! SC 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 0.87 HN 1.29 KP 0.88 ! MK 0.93 NL 0.84 OV 0.85 PT 0.89 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.24 HN 0.96 KP 1.24 LA 1.28 ! NL 1.20 OV 1.35 PT 1.30 SC 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.19 FD 0.96 HN 1.23 KP 0.94 ! LA 1.04 MK 1.20 NL 1.07 OV 0.85 ! SC 0.91 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.98 KP 1.02 LA 0.99 ! MK 1.10 NL 1.22 OV 0.89 PT 0.95 ! SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.91 FD 0.88 HN 1.13 KP 0.88 ! MK 0.99 NL 0.86 OV 0.87 PT 0.91 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.28 HN 1.09 KP 1.24 LA 1.30 ! NL 1.15 OV 1.36 PT 1.28 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.30 FD 0.93 HN 1.12 KP 0.98 ! LA 0.94 MK 1.25 NL 1.04 OV 0.83 ! SC 0.85 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.99 KP 1.01 LA 0.97 ! MK 1.09 NL 1.22 OV 0.86 PT 0.94 ! SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 FD 0.87 HN 1.20 KP 0.84 ! MK 0.96 NL 0.81 OV 0.85 PT 0.89 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.30 HN 1.09 KP 1.12 LA 1.28 ! NL 1.14 OV 1.26 PT 1.25 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.26 FD 0.96 HN 1.06 KP 0.96 ! LA 0.97 MK 1.11 NL 1.00 OV 0.85 ! SC 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.96 KP 1.03 LA 0.97 ! MK 1.10 NL 1.21 OV 0.89 PT 0.96 ! SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.91 FD 0.88 HN 1.25 KP 0.87 ! MK 0.97 NL 0.84 OV 0.83 PT 0.87 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.23 HN 1.07 KP 1.15 LA 1.31 ! NL 1.23 OV 1.21 PT 1.28 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.19 FD 0.97 HN 1.08 KP 0.95 ! LA 1.00 MK 1.12 NL 1.08 OV 0.84 ! SC 0.87 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.95 KP 0.99 LA 1.00 ! MK 1.13 NL 1.20 OV 0.85 PT 1.00 ! SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.92 FD 0.84 HN 1.40 KP 0.86 ! MK 0.99 NL 0.83 OV 0.87 PT 0.90 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.22 HN 1.18 KP 1.12 LA 1.38 ! NL 1.11 OV 1.32 PT 1.28 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.30 FD 0.92 HN 1.13 KP 0.99 ! LA 0.97 MK 1.10 NL 1.05 OV 0.82 ! SC 0.91 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 1.00 KP 0.97 LA 0.97 ! MK 1.09 NL 1.22 OV 0.84 PT 1.04 ! SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 FD 0.87 HN 1.35 KP 0.85 ! MK 0.95 NL 0.80 OV 0.85 PT 0.87 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.27 HN 0.92 KP 1.18 LA 1.23 ! NL 1.18 OV 1.34 PT 1.26 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.21 FD 0.90 HN 0.98 KP 0.95 ! LA 0.99 MK 1.19 NL 1.09 OV 0.83 ! SC 0.85 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.94 KP 1.00 LA 0.95 ! MK 1.17 NL 1.18 OV 0.85 PT 0.96 ! SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 0.85 HN 1.37 KP 0.85 ! MK 0.95 NL 0.77 OV 0.83 PT 0.88 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.22 HN 0.98 KP 1.15 LA 1.33 ! NL 1.09 OV 1.34 PT 1.23 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.31 FD 0.94 HN 0.99 KP 0.97 ! LA 0.96 MK 1.14 NL 1.05 OV 0.81 ! SC 0.86 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.95 KP 0.98 LA 0.98 ! MK 1.11 NL 1.20 OV 0.89 PT 0.96 ! SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.88 FD 0.86 HN 1.26 KP 0.86 ! MK 0.96 NL 0.77 OV 0.85 PT 0.86 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.20 HN 0.97 KP 1.15 LA 1.22 ! NL 1.12 OV 1.25 PT 1.30 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.39 FD 0.87 HN 1.18 KP 0.94 ! LA 1.00 MK 1.10 NL 1.02 OV 0.87 ! SC 0.87 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 0.98 KP 1.01 LA 0.95 ! MK 1.11 NL 1.18 OV 0.84 PT 0.89 ! SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 0.86 HN 1.16 KP 0.83 ! MK 0.97 NL 0.77 OV 0.83 PT 0.88 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.18 HN 0.99 KP 1.15 LA 1.35 ! NL 1.06 OV 1.25 PT 1.21 SC 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.41 FD 0.91 HN 1.23 KP 0.94 ! LA 0.95 MK 1.09 NL 1.02 OV 0.84 ! SC 0.87 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.95 KP 0.94 LA 0.98 ! MK 1.09 NL 1.17 OV 0.89 PT 0.95 ! SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 0.82 HN 1.19 KP 0.88 ! MK 0.92 NL 0.79 OV 0.85 PT 0.88 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.15 HN 0.97 KP 1.10 LA 1.27 ! NL 1.15 OV 1.16 PT 1.28 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.24 FD 0.95 HN 1.18 KP 0.95 ! LA 1.01 MK 1.08 NL 1.04 OV 0.82 ! SC 0.86 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.99 KP 1.00 LA 0.96 ! MK 1.13 NL 1.17 OV 0.86 PT 0.90 ! SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.91 FD 0.85 HN 1.03 KP 0.87 ! MK 0.92 NL 0.77 OV 0.83 PT 0.86 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.20 HN 0.91 KP 1.10 LA 1.20 ! NL 1.11 OV 1.21 PT 1.21 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.28 FD 0.91 HN 1.09 KP 0.97 ! LA 0.94 MK 1.09 NL 1.01 OV 0.87 ! SC 0.83 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 0.95 KP 0.98 LA 0.91 ! MK 1.06 NL 1.11 OV 0.82 PT 0.95 ! SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.87 FD 0.82 HN 0.96 KP 0.87 ! MK 0.91 NL 0.80 OV 0.83 PT 0.86 ! ! ! Fit before self-cal, rms=0.088640Jy sigma=0.880027 ! Fit after self-cal, rms=0.095018Jy sigma=0.800087 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.883 mas, bmaj=2.641 mas, bpa=-8.798 degrees ! Estimated noise=0.282438 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00175906 Jy ! Component: 100 - total flux cleaned = -0.00202004 Jy ! Component: 150 - total flux cleaned = -0.00231558 Jy ! Component: 200 - total flux cleaned = -0.00251174 Jy ! Total flux subtracted in 200 components = -0.00251174 Jy ! Clean residual min=-0.001956 max=0.001741 Jy/beam ! Clean residual mean=-0.000004 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.13741 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 48 components and 0.13741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094843Jy sigma=0.798294 ! Fit after self-cal, rms=0.094939Jy sigma=0.797812 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094939Jy sigma=0.797812 ! Fit after self-cal, rms=0.096298Jy sigma=0.796962 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8821 mas, bmaj=2.628 mas, bpa=-8.73 degrees ! Estimated noise=0.282217 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121471 Jy ! Component: 100 - total flux cleaned = -0.00142078 Jy ! Component: 150 - total flux cleaned = -0.00165558 Jy ! Component: 200 - total flux cleaned = -0.00180976 Jy ! Total flux subtracted in 200 components = -0.00180976 Jy ! Clean residual min=-0.001690 max=0.001576 Jy/beam ! Clean residual mean=-0.000005 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.1356 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 53 components and 0.1356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096198Jy sigma=0.795868 ! Fit after self-cal, rms=0.096232Jy sigma=0.795802 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000335809 Jy ! Component: 100 - total flux cleaned = -0.000427894 Jy ! Component: 150 - total flux cleaned = -0.000511507 Jy ! Component: 200 - total flux cleaned = -0.000551126 Jy ! Total flux subtracted in 200 components = -0.000551126 Jy ! Clean residual min=-0.001588 max=0.001574 Jy/beam ! Clean residual mean=-0.000005 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.135049 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.135049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096186Jy sigma=0.795362 ! Fit after self-cal, rms=0.096183Jy sigma=0.795338 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096183Jy sigma=0.795338 ! Fit after self-cal, rms=0.098326Jy sigma=0.793367 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8808 mas, bmaj=2.617 mas, bpa=-8.736 degrees ! Estimated noise=0.281964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000706007 Jy ! Component: 100 - total flux cleaned = -0.000798488 Jy ! Component: 150 - total flux cleaned = -0.000875401 Jy ! Component: 200 - total flux cleaned = -0.00094535 Jy ! Total flux subtracted in 200 components = -0.00094535 Jy ! Clean residual min=-0.001393 max=0.001286 Jy/beam ! Clean residual mean=-0.000006 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.134104 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.134104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098278Jy sigma=0.792890 ! Fit after self-cal, rms=0.098337Jy sigma=0.792784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161638 Jy ! Component: 100 - total flux cleaned = -0.000194178 Jy ! Component: 150 - total flux cleaned = -0.000223867 Jy ! Component: 200 - total flux cleaned = -0.000277142 Jy ! Total flux subtracted in 200 components = -0.000277142 Jy ! Clean residual min=-0.001343 max=0.001268 Jy/beam ! Clean residual mean=-0.000006 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.133827 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.133827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098317Jy sigma=0.792589 ! Fit after self-cal, rms=0.098321Jy sigma=0.792581 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098321Jy sigma=0.792581 ! Fit after self-cal, rms=0.099667Jy sigma=0.792358 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=7.155 mas, bpa=-4.113 degrees ! Estimated noise=0.337861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000313376 Jy ! Component: 100 - total flux cleaned = -0.000290975 Jy ! Component: 150 - total flux cleaned = -0.00031178 Jy ! Component: 200 - total flux cleaned = -0.000312355 Jy ! Total flux subtracted in 200 components = -0.000312355 Jy ! Clean residual min=-0.001255 max=0.001252 Jy/beam ! Clean residual mean=-0.000011 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.133514 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 64 components and 0.133514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099650Jy sigma=0.792280 ! Fit after self-cal, rms=0.099674Jy sigma=0.792238 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.01614e-05 Jy ! Component: 100 - total flux cleaned = -5.39353e-05 Jy ! Component: 150 - total flux cleaned = -3.767e-05 Jy ! Component: 200 - total flux cleaned = -2.40098e-05 Jy ! Total flux subtracted in 200 components = -2.40098e-05 Jy ! Clean residual min=-0.001272 max=0.001264 Jy/beam ! Clean residual mean=-0.000010 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.13349 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 68 components and 0.13349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099666Jy sigma=0.792228 ! Fit after self-cal, rms=0.099669Jy sigma=0.792205 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8793 mas, bmaj=2.605 mas, bpa=-8.679 degrees ! Estimated noise=0.281815 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8793 x 2.605 at -8.679 degrees (North through East) ! Clean map min=-0.0028901 max=0.10116 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6408 mas, bmaj=1.933 mas, bpa=-4.776 degrees ! Estimated noise=0.628467 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0918251 Jy ! Component: 100 - total flux cleaned = 0.114858 Jy ! Component: 150 - total flux cleaned = 0.124913 Jy ! Component: 200 - total flux cleaned = 0.128814 Jy ! Total flux subtracted in 200 components = 0.128814 Jy ! Clean residual min=-0.003127 max=0.004531 Jy/beam ! Clean residual mean=-0.000003 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.128813 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.128813 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8793 mas, bmaj=2.605 mas, bpa=-8.679 degrees ! Estimated noise=0.281815 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00390589 Jy ! Component: 100 - total flux cleaned = 0.00487955 Jy ! Component: 150 - total flux cleaned = 0.00504551 Jy ! Component: 200 - total flux cleaned = 0.00504467 Jy ! Total flux subtracted in 200 components = 0.00504467 Jy ! Clean residual min=-0.001409 max=0.001565 Jy/beam ! Clean residual mean=-0.000006 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.133858 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 34 components and 0.133858 Jy ! Inverting map ! Added new window around map position (-0.6, 9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116377 Jy ! Component: 100 - total flux cleaned = 0.00124357 Jy ! Component: 150 - total flux cleaned = 0.00120659 Jy ! Component: 200 - total flux cleaned = 0.00120771 Jy ! Total flux subtracted in 200 components = 0.00120771 Jy ! Clean residual min=-0.001230 max=0.001475 Jy/beam ! Clean residual mean=-0.000006 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.135066 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 0.135066 Jy ! Inverting map ! Added new window around map position (-1.4, 29.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102137 Jy ! Component: 100 - total flux cleaned = 0.00105229 Jy ! Component: 150 - total flux cleaned = 0.00102271 Jy ! Component: 200 - total flux cleaned = 0.00102296 Jy ! Total flux subtracted in 200 components = 0.00102296 Jy ! Clean residual min=-0.001137 max=0.001215 Jy/beam ! Clean residual mean=-0.000005 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.136089 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 59 components and 0.136089 Jy ! Inverting map ! Added new window around map position (2.4, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000638055 Jy ! Component: 100 - total flux cleaned = 0.000643923 Jy ! Component: 150 - total flux cleaned = 0.000674694 Jy ! Component: 200 - total flux cleaned = 0.00072918 Jy ! Total flux subtracted in 200 components = 0.00072918 Jy ! Clean residual min=-0.001172 max=0.001079 Jy/beam ! Clean residual mean=-0.000005 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.136818 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 72 components and 0.136818 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=7.155 mas, bpa=-4.113 degrees ! Estimated noise=0.337861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.82289e-05 Jy ! Component: 100 - total flux cleaned = 8.7986e-05 Jy ! Component: 150 - total flux cleaned = 8.96519e-05 Jy ! Component: 200 - total flux cleaned = 0.000105796 Jy ! Total flux subtracted in 200 components = 0.000105796 Jy ! Clean residual min=-0.001273 max=0.001251 Jy/beam ! Clean residual mean=-0.000008 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.136924 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.38185e-07 Jy ! Component: 100 - total flux cleaned = -1.48786e-05 Jy ! Component: 150 - total flux cleaned = -1.21791e-06 Jy ! Component: 200 - total flux cleaned = 2.49008e-05 Jy ! Total flux subtracted in 200 components = 2.49008e-05 Jy ! Clean residual min=-0.001268 max=0.001245 Jy/beam ! Clean residual mean=-0.000007 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.136949 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 0.136949 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8793 mas, bmaj=2.605 mas, bpa=-8.679 degrees ! Estimated noise=0.281815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231604 Jy ! Component: 100 - total flux cleaned = -0.000179668 Jy ! Component: 150 - total flux cleaned = -0.000179557 Jy ! Component: 200 - total flux cleaned = -0.000157341 Jy ! Total flux subtracted in 200 components = -0.000157341 Jy ! Clean residual min=-0.001172 max=0.001111 Jy/beam ! Clean residual mean=-0.000004 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.136791 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 105 components and 0.136791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099599Jy sigma=0.791560 ! Fit after self-cal, rms=0.099623Jy sigma=0.791459 wmodel J0925-3547_X_map.mod ! Writing 105 model components to file: J0925-3547_X_map.mod wobs J0925-3547_X_uvs.fits ! Writing UV FITS file: J0925-3547_X_uvs.fits wwins J0925-3547_X_map.win ! wwins: Wrote 7 windows to J0925-3547_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000235403 Jy ! Component: 100 - total flux cleaned = -0.000333377 Jy ! Component: 150 - total flux cleaned = -0.000522411 Jy ! Component: 200 - total flux cleaned = -0.00070544 Jy ! Component: 250 - total flux cleaned = -0.000883065 Jy ! Component: 300 - total flux cleaned = -0.000934904 Jy ! Component: 350 - total flux cleaned = -0.00103619 Jy ! Component: 400 - total flux cleaned = -0.00110198 Jy ! Component: 450 - total flux cleaned = -0.0011183 Jy ! Component: 500 - total flux cleaned = -0.00118281 Jy ! Component: 550 - total flux cleaned = -0.0012617 Jy ! Component: 600 - total flux cleaned = -0.00127722 Jy ! Component: 650 - total flux cleaned = -0.00129238 Jy ! Component: 700 - total flux cleaned = -0.0012472 Jy ! Component: 750 - total flux cleaned = -0.00127703 Jy ! Component: 800 - total flux cleaned = -0.00126234 Jy ! Component: 850 - total flux cleaned = -0.00124776 Jy ! Component: 900 - total flux cleaned = -0.00124767 Jy ! Component: 950 - total flux cleaned = -0.00119123 Jy ! Component: 1000 - total flux cleaned = -0.00121909 Jy ! Component: 1050 - total flux cleaned = -0.0011916 Jy ! Component: 1100 - total flux cleaned = -0.00117798 Jy ! Component: 1150 - total flux cleaned = -0.00119145 Jy ! Component: 1200 - total flux cleaned = -0.00119136 Jy ! Component: 1250 - total flux cleaned = -0.00117825 Jy ! Component: 1300 - total flux cleaned = -0.00117844 Jy ! Component: 1350 - total flux cleaned = -0.00116538 Jy ! Component: 1400 - total flux cleaned = -0.00115262 Jy ! Component: 1450 - total flux cleaned = -0.00117847 Jy ! Component: 1500 - total flux cleaned = -0.00121653 Jy ! Component: 1550 - total flux cleaned = -0.00119144 Jy ! Component: 1600 - total flux cleaned = -0.00119149 Jy ! Component: 1650 - total flux cleaned = -0.00120378 Jy ! Component: 1700 - total flux cleaned = -0.00119155 Jy ! Component: 1750 - total flux cleaned = -0.00127675 Jy ! Component: 1800 - total flux cleaned = -0.00120398 Jy ! Component: 1850 - total flux cleaned = -0.00114417 Jy ! Component: 1900 - total flux cleaned = -0.00114422 Jy ! Component: 1950 - total flux cleaned = -0.00110893 Jy ! Component: 2000 - total flux cleaned = -0.0011675 Jy ! Component: 2050 - total flux cleaned = -0.00113264 Jy ! Component: 2100 - total flux cleaned = -0.00114417 Jy ! Component: 2150 - total flux cleaned = -0.0011325 Jy ! Component: 2200 - total flux cleaned = -0.00113244 Jy ! Component: 2250 - total flux cleaned = -0.00110982 Jy ! Component: 2300 - total flux cleaned = -0.00113228 Jy ! Component: 2350 - total flux cleaned = -0.00115449 Jy ! Component: 2400 - total flux cleaned = -0.00108758 Jy ! Component: 2450 - total flux cleaned = -0.00107653 Jy ! Component: 2500 - total flux cleaned = -0.0010545 Jy ! Component: 2550 - total flux cleaned = -0.00105453 Jy ! Component: 2600 - total flux cleaned = -0.00101109 Jy ! Component: 2650 - total flux cleaned = -0.00100024 Jy ! Component: 2700 - total flux cleaned = -0.00098948 Jy ! Component: 2750 - total flux cleaned = -0.000989535 Jy ! Component: 2800 - total flux cleaned = -0.000957656 Jy ! Component: 2850 - total flux cleaned = -0.000957675 Jy ! Component: 2900 - total flux cleaned = -0.000957725 Jy ! Component: 2950 - total flux cleaned = -0.00097876 Jy ! Component: 3000 - total flux cleaned = -0.00101015 Jy ! Component: 3050 - total flux cleaned = -0.000999691 Jy ! Component: 3100 - total flux cleaned = -0.00101012 Jy ! Component: 3150 - total flux cleaned = -0.00101013 Jy ! Component: 3200 - total flux cleaned = -0.00104078 Jy ! Component: 3250 - total flux cleaned = -0.00105091 Jy ! Component: 3300 - total flux cleaned = -0.00100027 Jy ! Component: 3350 - total flux cleaned = -0.000990147 Jy ! Component: 3400 - total flux cleaned = -0.000949983 Jy ! Component: 3450 - total flux cleaned = -0.000969949 Jy ! Component: 3500 - total flux cleaned = -0.000930109 Jy ! Component: 3550 - total flux cleaned = -0.00092014 Jy ! Component: 3600 - total flux cleaned = -0.000890468 Jy ! Component: 3650 - total flux cleaned = -0.00085115 Jy ! Component: 3700 - total flux cleaned = -0.000811924 Jy ! Component: 3750 - total flux cleaned = -0.000841204 Jy ! Component: 3800 - total flux cleaned = -0.000821838 Jy ! Component: 3850 - total flux cleaned = -0.000792842 Jy ! Component: 3900 - total flux cleaned = -0.00077365 Jy ! Component: 3950 - total flux cleaned = -0.000754418 Jy ! Component: 4000 - total flux cleaned = -0.000744865 Jy ! Component: 4050 - total flux cleaned = -0.000668758 Jy ! Total flux subtracted in 4096 components = -0.000668709 Jy ! Clean residual min=-0.000502 max=0.000582 Jy/beam ! Clean residual mean=-0.000003 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.136123 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 405 components and 0.136123 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0925-3547_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8793 x 2.605 at -8.679 degrees (North through East) ! Clean map min=-0.0013997 max=0.10412 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0925-3547_X_map.fits wmodel /vlbi/bp222/temp_maps//J0925-3547_X_map.mod ! Writing 405 model components to file: /vlbi/bp222/temp_maps//J0925-3547_X_map.mod wobs /vlbi/bp222/temp_maps//J0925-3547_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0925-3547_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0925-3547_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/temp_maps//J0925-3547_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.104125 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00016934 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.487895 0.487895 0.97579 1.95158 3.90316 7.80632 15.6126 31.2253 62.4506 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.104 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 614.886 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0925-3547_X_dfm.log closed on Thu Feb 14 22:45:33 2019