! Started logfile: /vlbi/bp222/maps//J0923+2815_X_dfm.log on Mon Jan 14 16:38:59 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/maps//J0923+2815_X_uva.fits ! Reading UV FITS file: /vlbi/bp222/maps//J0923+2815_X_uva.fits ! AN table 1: 69 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.978261 visibilities/baseline/integration-bin. ! Found source: J0923+2815 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 29160 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0923+2815_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.259967Jy sigma=19.275882 ! Fit after self-cal, rms=0.353521Jy sigma=5.403674 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5813 mas, bmaj=1.727 mas, bpa=-5.201 degrees ! Estimated noise=0.579037 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.498698 Jy ! Component: 100 - total flux cleaned = 0.684975 Jy ! Total flux subtracted in 100 components = 0.684975 Jy ! Clean residual min=-0.041065 max=0.090702 Jy/beam ! Clean residual mean=0.000032 rms=0.007287 Jy/beam ! Combined flux in latest and established models = 0.684975 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.684975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.212254Jy sigma=3.240255 ! Fit after self-cal, rms=0.212202Jy sigma=3.239322 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103192 Jy ! Component: 100 - total flux cleaned = 0.160876 Jy ! Total flux subtracted in 100 components = 0.160876 Jy ! Clean residual min=-0.024163 max=0.032605 Jy/beam ! Clean residual mean=0.000018 rms=0.003702 Jy/beam ! Combined flux in latest and established models = 0.845851 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 0.845851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124431Jy sigma=1.887179 ! Fit after self-cal, rms=0.124344Jy sigma=1.886421 ! Inverting map ! Added new window around map position (-2, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0366914 Jy ! Component: 100 - total flux cleaned = 0.0631212 Jy ! Total flux subtracted in 100 components = 0.0631212 Jy ! Clean residual min=-0.019577 max=0.023131 Jy/beam ! Clean residual mean=0.000013 rms=0.002873 Jy/beam ! Combined flux in latest and established models = 0.908972 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 0.908972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102156Jy sigma=1.539319 ! Fit after self-cal, rms=0.101875Jy sigma=1.534569 ! Inverting map ! Added new window around map position (2.2, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023806 Jy ! Component: 100 - total flux cleaned = 0.0397285 Jy ! Total flux subtracted in 100 components = 0.0397285 Jy ! Clean residual min=-0.017878 max=0.017463 Jy/beam ! Clean residual mean=0.000011 rms=0.002396 Jy/beam ! Combined flux in latest and established models = 0.948701 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 34 components and 0.948701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090122Jy sigma=1.347274 ! Fit after self-cal, rms=0.090016Jy sigma=1.344540 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7386 mas, bmaj=1.951 mas, bpa=-5.178 degrees ! Estimated noise=0.280107 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0335471 Jy ! Component: 100 - total flux cleaned = 0.0571406 Jy ! Component: 150 - total flux cleaned = 0.0759573 Jy ! Component: 200 - total flux cleaned = 0.0912283 Jy ! Total flux subtracted in 200 components = 0.0912283 Jy ! Clean residual min=-0.009224 max=0.014995 Jy/beam ! Clean residual mean=0.000018 rms=0.002481 Jy/beam ! Combined flux in latest and established models = 1.03993 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 67 components and 1.03993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071271Jy sigma=1.041462 ! Fit after self-cal, rms=0.070627Jy sigma=1.031759 ! Inverting map ! Added new window around map position (1.4, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161131 Jy ! Component: 100 - total flux cleaned = 0.0274224 Jy ! Component: 150 - total flux cleaned = 0.0364665 Jy ! Component: 200 - total flux cleaned = 0.0439391 Jy ! Total flux subtracted in 200 components = 0.0439391 Jy ! Clean residual min=-0.008740 max=0.008710 Jy/beam ! Clean residual mean=0.000009 rms=0.001538 Jy/beam ! Combined flux in latest and established models = 1.08387 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 86 components and 1.08387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065487Jy sigma=0.947438 ! Fit after self-cal, rms=0.065354Jy sigma=0.945334 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7386 x 1.951 at -5.178 degrees (North through East) ! Clean map min=-0.0070541 max=0.70309 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.99 KP 1.02 ! LA 0.98 MK 1.01 NL 1.02 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 0.98 KP 1.03 ! LA 0.98 MK 1.01 NL 1.02 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.98 KP 1.03 ! LA 0.99 MK 1.01 NL 1.02 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.99 KP 1.02 ! LA 0.99 MK 1.01 NL 1.02 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.98 KP 1.03 ! LA 0.99 MK 1.01 NL 1.02 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.99 KP 1.02 ! LA 0.99 MK 1.01 NL 1.02 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.99 KP 1.03 ! LA 0.99 MK 1.01 NL 1.01 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 0.99 KP 1.03 ! LA 0.99 MK 1.00 NL 1.02 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.99 KP 1.03 ! LA 0.99 MK 1.01 NL 1.03 PT 0.96 ! SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.00 KP 1.02 ! LA 0.99 MK 1.02 NL 1.02 PT 0.97 ! SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.99 KP 1.03 ! LA 0.99 MK 1.01 NL 1.02 PT 0.97 ! SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.00 KP 1.03 ! LA 0.99 MK 1.02 NL 1.02 PT 0.97 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.065354Jy sigma=0.945334 ! Fit after self-cal, rms=0.061692Jy sigma=0.884670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7406 mas, bmaj=1.959 mas, bpa=-5.233 degrees ! Estimated noise=0.280364 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00322282 Jy ! Component: 100 - total flux cleaned = -0.00415191 Jy ! Component: 150 - total flux cleaned = -0.00453211 Jy ! Component: 200 - total flux cleaned = -0.00474554 Jy ! Total flux subtracted in 200 components = -0.00474554 Jy ! Clean residual min=-0.005025 max=0.003171 Jy/beam ! Clean residual mean=0.000002 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 1.07912 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 106 components and 1.07912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061036Jy sigma=0.875000 ! Fit after self-cal, rms=0.061024Jy sigma=0.874586 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061024Jy sigma=0.874586 ! Fit after self-cal, rms=0.060853Jy sigma=0.871588 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.741 mas, bmaj=1.958 mas, bpa=-5.207 degrees ! Estimated noise=0.280672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177774 Jy ! Component: 100 - total flux cleaned = -0.0020747 Jy ! Component: 150 - total flux cleaned = -0.00243229 Jy ! Component: 200 - total flux cleaned = -0.00275736 Jy ! Total flux subtracted in 200 components = -0.00275736 Jy ! Clean residual min=-0.004787 max=0.002686 Jy/beam ! Clean residual mean=0.000002 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 1.07636 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 121 components and 1.07636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060570Jy sigma=0.867597 ! Fit after self-cal, rms=0.060560Jy sigma=0.867483 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000393822 Jy ! Component: 100 - total flux cleaned = -0.000744094 Jy ! Component: 150 - total flux cleaned = -0.001066 Jy ! Component: 200 - total flux cleaned = -0.00136411 Jy ! Total flux subtracted in 200 components = -0.00136411 Jy ! Clean residual min=-0.004616 max=0.002703 Jy/beam ! Clean residual mean=0.000002 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 1.075 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 126 components and 1.075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060409Jy sigma=0.865717 ! Fit after self-cal, rms=0.060404Jy sigma=0.865672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060404Jy sigma=0.865672 ! Fit after self-cal, rms=0.060077Jy sigma=0.860687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7411 mas, bmaj=1.957 mas, bpa=-5.21 degrees ! Estimated noise=0.280785 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000957764 Jy ! Component: 100 - total flux cleaned = -0.00119545 Jy ! Component: 150 - total flux cleaned = -0.00141081 Jy ! Component: 200 - total flux cleaned = -0.00170882 Jy ! Total flux subtracted in 200 components = -0.00170882 Jy ! Clean residual min=-0.004344 max=0.002764 Jy/beam ! Clean residual mean=0.000002 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 1.07329 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 131 components and 1.07329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059962Jy sigma=0.859088 ! Fit after self-cal, rms=0.059958Jy sigma=0.859062 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000340069 Jy ! Component: 100 - total flux cleaned = -0.000562373 Jy ! Component: 150 - total flux cleaned = -0.000809479 Jy ! Component: 200 - total flux cleaned = -0.00100246 Jy ! Total flux subtracted in 200 components = -0.00100246 Jy ! Clean residual min=-0.004293 max=0.002770 Jy/beam ! Clean residual mean=0.000003 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 1.07229 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 138 components and 1.07229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059894Jy sigma=0.858397 ! Fit after self-cal, rms=0.059891Jy sigma=0.858378 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059891Jy sigma=0.858378 ! Fit after self-cal, rms=0.059842Jy sigma=0.858036 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.979 mas, bmaj=2.599 mas, bpa=-11.32 degrees ! Estimated noise=0.395082 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00315131 Jy ! Component: 100 - total flux cleaned = -0.00331413 Jy ! Component: 150 - total flux cleaned = -0.00337898 Jy ! Component: 200 - total flux cleaned = -0.00332619 Jy ! Total flux subtracted in 200 components = -0.00332619 Jy ! Clean residual min=-0.004656 max=0.003496 Jy/beam ! Clean residual mean=0.000007 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 1.06896 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 149 components and 1.06896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059864Jy sigma=0.859093 ! Fit after self-cal, rms=0.059829Jy sigma=0.858804 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155465 Jy ! Component: 100 - total flux cleaned = 0.000100434 Jy ! Component: 150 - total flux cleaned = 0.000171629 Jy ! Component: 200 - total flux cleaned = 0.000202785 Jy ! Total flux subtracted in 200 components = 0.000202785 Jy ! Clean residual min=-0.004445 max=0.003573 Jy/beam ! Clean residual mean=0.000006 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 1.06917 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 157 components and 1.06917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059871Jy sigma=0.859994 ! Fit after self-cal, rms=0.059858Jy sigma=0.859899 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.741 mas, bmaj=1.957 mas, bpa=-5.213 degrees ! Estimated noise=0.280823 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.741 x 1.957 at -5.213 degrees (North through East) ! Clean map min=-0.0041342 max=0.704 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059858Jy sigma=0.859899 ! Fit after self-cal, rms=0.056374Jy sigma=0.793367 ! Inverting map and beam ! Estimated beam: bmin=0.7403 mas, bmaj=1.955 mas, bpa=-5.183 degrees ! Estimated noise=0.280533 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000359224 Jy ! Component: 100 - total flux cleaned = -0.000363895 Jy ! Component: 150 - total flux cleaned = -0.00036257 Jy ! Component: 200 - total flux cleaned = -0.000503452 Jy ! Total flux subtracted in 200 components = -0.000503452 Jy ! Clean residual min=-0.004070 max=0.002739 Jy/beam ! Clean residual mean=0.000002 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 1.06866 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 166 components and 1.06866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056249Jy sigma=0.791392 ! Fit after self-cal, rms=0.056249Jy sigma=0.791367 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.23709e-05 Jy ! Component: 100 - total flux cleaned = -0.000131682 Jy ! Component: 150 - total flux cleaned = -0.000275439 Jy ! Component: 200 - total flux cleaned = -0.000410931 Jy ! Total flux subtracted in 200 components = -0.000410931 Jy ! Clean residual min=-0.004052 max=0.002707 Jy/beam ! Clean residual mean=0.000002 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 1.06825 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 172 components and 1.06825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056210Jy sigma=0.790634 ! Fit after self-cal, rms=0.056210Jy sigma=0.790623 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056210Jy sigma=0.790623 ! Fit after self-cal, rms=0.056160Jy sigma=0.790256 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5822 mas, bmaj=1.729 mas, bpa=-5.193 degrees ! Estimated noise=0.581635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.501063 Jy ! Component: 100 - total flux cleaned = 0.687235 Jy ! Component: 150 - total flux cleaned = 0.790262 Jy ! Component: 200 - total flux cleaned = 0.847957 Jy ! Total flux subtracted in 200 components = 0.847957 Jy ! Clean residual min=-0.018943 max=0.029410 Jy/beam ! Clean residual mean=0.000017 rms=0.003335 Jy/beam ! Combined flux in latest and established models = 0.847957 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.847957 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7401 mas, bmaj=1.955 mas, bpa=-5.182 degrees ! Estimated noise=0.280525 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.060373 Jy ! Component: 100 - total flux cleaned = 0.0986206 Jy ! Component: 150 - total flux cleaned = 0.125954 Jy ! Component: 200 - total flux cleaned = 0.146531 Jy ! Total flux subtracted in 200 components = 0.146531 Jy ! Clean residual min=-0.006820 max=0.012378 Jy/beam ! Clean residual mean=0.000018 rms=0.002218 Jy/beam ! Combined flux in latest and established models = 0.994488 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 47 components and 0.994488 Jy ! Inverting map ! Added new window around map position (-2.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158269 Jy ! Component: 100 - total flux cleaned = 0.0281983 Jy ! Component: 150 - total flux cleaned = 0.0380299 Jy ! Component: 200 - total flux cleaned = 0.0459796 Jy ! Total flux subtracted in 200 components = 0.0459796 Jy ! Clean residual min=-0.005754 max=0.005882 Jy/beam ! Clean residual mean=0.000008 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 1.04047 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 70 components and 1.04047 Jy ! Inverting map ! Added new window around map position (-1, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0067142 Jy ! Component: 100 - total flux cleaned = 0.0120911 Jy ! Component: 150 - total flux cleaned = 0.0160312 Jy ! Component: 200 - total flux cleaned = 0.0178947 Jy ! Total flux subtracted in 200 components = 0.0178947 Jy ! Clean residual min=-0.005408 max=0.003033 Jy/beam ! Clean residual mean=0.000005 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 1.05836 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 86 components and 1.05836 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.98 mas, bmaj=2.597 mas, bpa=-11.12 degrees ! Estimated noise=0.395392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373885 Jy ! Component: 100 - total flux cleaned = 0.00511279 Jy ! Component: 150 - total flux cleaned = 0.00573158 Jy ! Component: 200 - total flux cleaned = 0.00563193 Jy ! Total flux subtracted in 200 components = 0.00563193 Jy ! Clean residual min=-0.004589 max=0.003241 Jy/beam ! Clean residual mean=0.000008 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 1.06399 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268839 Jy ! Component: 100 - total flux cleaned = 0.000501432 Jy ! Component: 150 - total flux cleaned = 0.000570041 Jy ! Component: 200 - total flux cleaned = 0.00075828 Jy ! Total flux subtracted in 200 components = 0.00075828 Jy ! Clean residual min=-0.004052 max=0.003045 Jy/beam ! Clean residual mean=0.000006 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 1.06475 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 122 components and 1.06475 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7401 mas, bmaj=1.955 mas, bpa=-5.182 degrees ! Estimated noise=0.280525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195119 Jy ! Component: 100 - total flux cleaned = -0.00241729 Jy ! Component: 150 - total flux cleaned = -0.00221313 Jy ! Component: 200 - total flux cleaned = -0.00194346 Jy ! Total flux subtracted in 200 components = -0.00194346 Jy ! Clean residual min=-0.004020 max=0.002748 Jy/beam ! Clean residual mean=0.000002 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 1.06281 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 138 components and 1.06281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056387Jy sigma=0.793135 ! Fit after self-cal, rms=0.056344Jy sigma=0.792610 wmodel J0923+2815_X_map.mod ! Writing 138 model components to file: J0923+2815_X_map.mod wobs J0923+2815_X_uvs.fits ! Writing UV FITS file: J0923+2815_X_uvs.fits wwins J0923+2815_X_map.win ! wwins: Wrote 7 windows to J0923+2815_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00155279 Jy ! Component: 100 - total flux cleaned = -0.00233196 Jy ! Component: 150 - total flux cleaned = -0.0027907 Jy ! Component: 200 - total flux cleaned = -0.00312826 Jy ! Component: 250 - total flux cleaned = -0.00344333 Jy ! Component: 300 - total flux cleaned = -0.003778 Jy ! Component: 350 - total flux cleaned = -0.00399397 Jy ! Component: 400 - total flux cleaned = -0.00413398 Jy ! Component: 450 - total flux cleaned = -0.00440587 Jy ! Component: 500 - total flux cleaned = -0.00460439 Jy ! Component: 550 - total flux cleaned = -0.00486316 Jy ! Component: 600 - total flux cleaned = -0.00514659 Jy ! Component: 650 - total flux cleaned = -0.00530047 Jy ! Component: 700 - total flux cleaned = -0.00545151 Jy ! Component: 750 - total flux cleaned = -0.00559975 Jy ! Component: 800 - total flux cleaned = -0.0058021 Jy ! Component: 850 - total flux cleaned = -0.00600088 Jy ! Component: 900 - total flux cleaned = -0.00622307 Jy ! Component: 950 - total flux cleaned = -0.00635944 Jy ! Component: 1000 - total flux cleaned = -0.00652028 Jy ! Component: 1050 - total flux cleaned = -0.00659907 Jy ! Component: 1100 - total flux cleaned = -0.00683154 Jy ! Component: 1150 - total flux cleaned = -0.00688228 Jy ! Component: 1200 - total flux cleaned = -0.0069071 Jy ! Component: 1250 - total flux cleaned = -0.00695654 Jy ! Component: 1300 - total flux cleaned = -0.00714987 Jy ! Component: 1350 - total flux cleaned = -0.00731594 Jy ! Component: 1400 - total flux cleaned = -0.00726956 Jy ! Component: 1450 - total flux cleaned = -0.00743193 Jy ! Component: 1500 - total flux cleaned = -0.00754573 Jy ! Component: 1550 - total flux cleaned = -0.00768025 Jy ! Component: 1600 - total flux cleaned = -0.00774679 Jy ! Component: 1650 - total flux cleaned = -0.00785617 Jy ! Component: 1700 - total flux cleaned = -0.00789917 Jy ! Component: 1750 - total flux cleaned = -0.00796256 Jy ! Component: 1800 - total flux cleaned = -0.00808796 Jy ! Component: 1850 - total flux cleaned = -0.00808786 Jy ! Component: 1900 - total flux cleaned = -0.00818914 Jy ! Component: 1950 - total flux cleaned = -0.00820921 Jy ! Component: 2000 - total flux cleaned = -0.00824933 Jy ! Component: 2050 - total flux cleaned = -0.00822936 Jy ! Component: 2100 - total flux cleaned = -0.00819091 Jy ! Component: 2150 - total flux cleaned = -0.00819085 Jy ! Component: 2200 - total flux cleaned = -0.00819085 Jy ! Component: 2250 - total flux cleaned = -0.00822837 Jy ! Component: 2300 - total flux cleaned = -0.00824681 Jy ! Component: 2350 - total flux cleaned = -0.00826534 Jy ! Component: 2400 - total flux cleaned = -0.00831973 Jy ! Component: 2450 - total flux cleaned = -0.008355 Jy ! Component: 2500 - total flux cleaned = -0.00833795 Jy ! Component: 2550 - total flux cleaned = -0.00844214 Jy ! Component: 2600 - total flux cleaned = -0.00837286 Jy ! Component: 2650 - total flux cleaned = -0.00842398 Jy ! Component: 2700 - total flux cleaned = -0.00837275 Jy ! Component: 2750 - total flux cleaned = -0.00845644 Jy ! Component: 2800 - total flux cleaned = -0.00840686 Jy ! Component: 2850 - total flux cleaned = -0.00842342 Jy ! Component: 2900 - total flux cleaned = -0.00840706 Jy ! Component: 2950 - total flux cleaned = -0.00842324 Jy ! Component: 3000 - total flux cleaned = -0.00851843 Jy ! Component: 3050 - total flux cleaned = -0.00856527 Jy ! Component: 3100 - total flux cleaned = -0.00851841 Jy ! Component: 3150 - total flux cleaned = -0.00853384 Jy ! Component: 3200 - total flux cleaned = -0.00851874 Jy ! Component: 3250 - total flux cleaned = -0.00860912 Jy ! Component: 3300 - total flux cleaned = -0.00862397 Jy ! Component: 3350 - total flux cleaned = -0.00869777 Jy ! Component: 3400 - total flux cleaned = -0.00865375 Jy ! Component: 3450 - total flux cleaned = -0.00865371 Jy ! Component: 3500 - total flux cleaned = -0.00876862 Jy ! Component: 3550 - total flux cleaned = -0.00871168 Jy ! Component: 3600 - total flux cleaned = -0.00879656 Jy ! Component: 3650 - total flux cleaned = -0.00886655 Jy ! Component: 3700 - total flux cleaned = -0.00881104 Jy ! Component: 3750 - total flux cleaned = -0.00890739 Jy ! Component: 3800 - total flux cleaned = -0.00889354 Jy ! Component: 3850 - total flux cleaned = -0.00893457 Jy ! Component: 3900 - total flux cleaned = -0.00897498 Jy ! Component: 3950 - total flux cleaned = -0.00900173 Jy ! Component: 4000 - total flux cleaned = -0.00906795 Jy ! Component: 4050 - total flux cleaned = -0.00917301 Jy ! Total flux subtracted in 4096 components = -0.00912089 Jy ! Clean residual min=-0.000651 max=0.000741 Jy/beam ! Clean residual mean=0.000001 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 1.05369 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 434 components and 1.05369 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/maps//J0923+2815_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7401 x 1.955 at -5.182 degrees (North through East) ! Clean map min=-0.0031899 max=0.70714 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/maps//J0923+2815_X_map.fits wmodel /vlbi/bp222/maps//J0923+2815_X_map.mod ! Writing 434 model components to file: /vlbi/bp222/maps//J0923+2815_X_map.mod wobs /vlbi/bp222/maps//J0923+2815_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/maps//J0923+2815_X_uvs.fits wwins /vlbi/bp222/maps//J0923+2815_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/maps//J0923+2815_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.707142 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00021619 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.091717 0.091717 0.183434 0.366868 0.733736 1.46747 2.93494 5.86989 11.7398 23.4795 46.9591 93.9182 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.707 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3270.93 quit ! Quitting program ! Log file /vlbi/bp222/maps//J0923+2815_X_dfm.log closed on Mon Jan 14 16:39:05 2019