! Started logfile: /vlbi/bp222/temp_maps//J0922-3959_X_dfm.log on Thu Feb 14 22:44:41 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0922-3959_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0922-3959_X_uvm.fits ! AN table 1: 51 integrations on 28 of 28 possible baselines. ! AN table 2: 17 integrations on 21 of 21 possible baselines. ! AN table 3: 17 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.857585 visibilities/baseline/integration-bin. ! Found source: J0922-3959 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 23268 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0922-3959_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.203327Jy sigma=14.892406 ! Fit after self-cal, rms=0.502970Jy sigma=5.063666 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6956 mas, bmaj=2.415 mas, bpa=1.511 degrees ! Estimated noise=0.819072 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.468307 Jy ! Component: 100 - total flux cleaned = 0.635445 Jy ! Total flux subtracted in 100 components = 0.635445 Jy ! Clean residual min=-0.036540 max=0.080712 Jy/beam ! Clean residual mean=-0.000166 rms=0.009431 Jy/beam ! Combined flux in latest and established models = 0.635445 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.635445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.255022Jy sigma=3.201016 ! Fit after self-cal, rms=0.254695Jy sigma=3.198357 ! Inverting map ! Added new window around map position (-1.4, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0885977 Jy ! Component: 100 - total flux cleaned = 0.139817 Jy ! Total flux subtracted in 100 components = 0.139817 Jy ! Clean residual min=-0.032200 max=0.052872 Jy/beam ! Clean residual mean=-0.000090 rms=0.007100 Jy/beam ! Combined flux in latest and established models = 0.775263 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.775263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.217493Jy sigma=2.469371 ! Fit after self-cal, rms=0.216798Jy sigma=2.458725 ! Inverting map ! Added new window around map position (-0.2, -4.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0448365 Jy ! Component: 100 - total flux cleaned = 0.0738002 Jy ! Total flux subtracted in 100 components = 0.0738002 Jy ! Clean residual min=-0.028364 max=0.039430 Jy/beam ! Clean residual mean=-0.000052 rms=0.006274 Jy/beam ! Combined flux in latest and established models = 0.849063 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.849063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.204982Jy sigma=2.183059 ! Fit after self-cal, rms=0.204053Jy sigma=2.167701 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9076 mas, bmaj=3.14 mas, bpa=1.031 degrees ! Estimated noise=0.417711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0436224 Jy ! Component: 100 - total flux cleaned = 0.0678611 Jy ! Component: 150 - total flux cleaned = 0.0792233 Jy ! Component: 200 - total flux cleaned = 0.0816465 Jy ! Total flux subtracted in 200 components = 0.0816465 Jy ! Clean residual min=-0.034785 max=0.033056 Jy/beam ! Clean residual mean=0.000015 rms=0.008427 Jy/beam ! Combined flux in latest and established models = 0.930709 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 60 components and 0.930709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.199926Jy sigma=1.970848 ! Fit after self-cal, rms=0.199388Jy sigma=1.958904 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9076 x 3.14 at 1.031 degrees (North through East) ! Clean map min=-0.031055 max=0.53795 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 1.40 KP 1.16 LA 1.04 ! NL 1.23 OV 0.88 PT 1.03 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 HN 2.59 KP 0.92 LA 0.94 ! NL 1.04 OV 0.94 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.93 KP 0.94 LA 0.94 MK 1.01 ! NL 1.22 OV 0.93 PT 1.03 SC 1.06 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.35 KP 1.14 LA 1.02 ! NL 1.23 OV 0.90 PT 1.03 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 HN 2.51 KP 0.93 LA 0.94 ! NL 1.04 OV 0.93 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.92 KP 0.94 LA 0.93 MK 1.05 ! NL 1.22 OV 0.94 PT 1.04 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.40 KP 1.16 LA 1.02 ! NL 1.21 OV 0.89 PT 1.04 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.91 HN 2.71 KP 0.93 LA 0.94 ! NL 1.06 OV 0.93 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.92 KP 0.95 LA 0.93 MK 1.05 ! NL 1.23 OV 0.93 PT 1.02 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.38 KP 1.16 LA 1.03 ! NL 1.23 OV 0.89 PT 1.02 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 HN 2.58 KP 0.91 LA 0.94 ! NL 1.03 OV 0.93 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.92 KP 0.93 LA 0.92 MK 1.01 ! NL 1.21 OV 0.94 PT 1.02 SC 1.05 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 1.39 KP 1.16 LA 1.02 ! NL 1.22 OV 0.89 PT 1.04 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 HN 2.69 KP 0.92 LA 0.94 ! NL 1.02 OV 0.92 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.91 KP 0.93 LA 0.92 MK 1.01 ! NL 1.21 OV 0.93 PT 1.05 SC 1.03 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.37 KP 1.16 LA 1.03 ! NL 1.22 OV 0.89 PT 1.04 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 HN 2.72 KP 0.92 LA 0.94 ! NL 1.02 OV 0.93 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.92 KP 0.93 LA 0.93 MK 0.97 ! NL 1.20 OV 0.93 PT 1.03 SC 1.04 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.40 KP 1.15 LA 1.03 ! NL 1.22 OV 0.89 PT 1.03 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.91 HN 2.69 KP 0.92 LA 0.94 ! NL 1.02 OV 0.94 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.92 KP 0.93 LA 0.93 MK 0.99 ! NL 1.19 OV 0.93 PT 1.02 SC 1.04 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.31 KP 1.16 LA 1.03 ! NL 1.21 OV 0.89 PT 1.02 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.91 HN 2.51 KP 0.93 LA 0.94 ! NL 1.02 OV 0.91 SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.92 KP 0.93 LA 0.93 MK 0.95 ! NL 1.22 OV 0.92 PT 1.02 SC 1.03 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.34 KP 1.14 LA 1.03 ! NL 1.17 OV 0.89 PT 1.03 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 HN 2.50 KP 0.92 LA 0.93 ! NL 0.99 OV 0.92 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.92 KP 0.93 LA 0.93 MK 0.95 ! NL 1.16 OV 0.93 PT 1.02 SC 1.00 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 1.36 KP 1.16 LA 1.02 ! NL 1.20 OV 0.89 PT 1.03 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.91 HN 2.66 KP 0.92 LA 0.93 ! NL 1.02 OV 0.93 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.91 KP 0.94 LA 0.93 MK 0.90 ! NL 1.18 OV 0.92 PT 1.03 SC 1.01 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.30 KP 1.14 LA 1.02 ! NL 1.19 OV 0.89 PT 1.02 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 HN 2.69 KP 0.92 LA 0.92 ! NL 0.97 OV 0.92 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.92 KP 0.92 LA 0.91 MK 0.90 ! NL 1.15 OV 0.92 PT 1.02 SC 1.04 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.37 KP 1.14 LA 1.01 ! NL 1.18 OV 0.87 PT 1.01 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 HN 2.56 KP 0.91 LA 0.91 ! NL 0.97 OV 0.91 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.90 KP 0.93 LA 0.92 MK 0.87 ! NL 1.14 OV 0.91 PT 1.00 SC 1.01 ! ! ! Fit before self-cal, rms=0.199388Jy sigma=1.958904 ! Fit after self-cal, rms=0.192969Jy sigma=1.519144 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9005 mas, bmaj=3.109 mas, bpa=1.299 degrees ! Estimated noise=0.430581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0145551 Jy ! Component: 100 - total flux cleaned = -0.01559 Jy ! Component: 150 - total flux cleaned = -0.0156181 Jy ! Component: 200 - total flux cleaned = -0.0159881 Jy ! Total flux subtracted in 200 components = -0.0159881 Jy ! Clean residual min=-0.022516 max=0.021749 Jy/beam ! Clean residual mean=-0.000041 rms=0.005160 Jy/beam ! Combined flux in latest and established models = 0.914721 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.914721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189508Jy sigma=1.488565 ! Fit after self-cal, rms=0.189796Jy sigma=1.486918 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189796Jy sigma=1.486918 ! Fit after self-cal, rms=0.227623Jy sigma=1.626611 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8886 mas, bmaj=3.031 mas, bpa=1.199 degrees ! Estimated noise=0.447263 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0282463 Jy ! Component: 100 - total flux cleaned = 0.028442 Jy ! Component: 150 - total flux cleaned = 0.0280018 Jy ! Component: 200 - total flux cleaned = 0.0280125 Jy ! Total flux subtracted in 200 components = 0.0280125 Jy ! Clean residual min=-0.033328 max=0.020653 Jy/beam ! Clean residual mean=-0.000043 rms=0.006594 Jy/beam ! Combined flux in latest and established models = 0.942734 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 0.942733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.223795Jy sigma=1.573867 ! Fit after self-cal, rms=0.223813Jy sigma=1.573293 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000369999 Jy ! Component: 100 - total flux cleaned = -0.000393074 Jy ! Component: 150 - total flux cleaned = -0.000407217 Jy ! Component: 200 - total flux cleaned = -0.000656686 Jy ! Total flux subtracted in 200 components = -0.000656686 Jy ! Clean residual min=-0.033804 max=0.020297 Jy/beam ! Clean residual mean=-0.000042 rms=0.006538 Jy/beam ! Combined flux in latest and established models = 0.942077 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 97 components and 0.942077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.222975Jy sigma=1.563452 ! Fit after self-cal, rms=0.223001Jy sigma=1.562969 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.223001Jy sigma=1.562969 ! Fit after self-cal, rms=0.199568Jy sigma=0.902871 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8865 mas, bmaj=3.039 mas, bpa=1.264 degrees ! Estimated noise=0.447522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00607579 Jy ! Component: 100 - total flux cleaned = -0.00755491 Jy ! Component: 150 - total flux cleaned = -0.00858532 Jy ! Component: 200 - total flux cleaned = -0.00910609 Jy ! Total flux subtracted in 200 components = -0.00910609 Jy ! Clean residual min=-0.010982 max=0.005942 Jy/beam ! Clean residual mean=0.000005 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 0.932971 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 101 components and 0.932971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.198645Jy sigma=0.893006 ! Fit after self-cal, rms=0.198776Jy sigma=0.891542 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00134202 Jy ! Component: 100 - total flux cleaned = -0.00194176 Jy ! Component: 150 - total flux cleaned = -0.00219581 Jy ! Component: 200 - total flux cleaned = -0.00242437 Jy ! Total flux subtracted in 200 components = -0.00242437 Jy ! Clean residual min=-0.010510 max=0.005549 Jy/beam ! Clean residual mean=0.000004 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 0.930546 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 104 components and 0.930546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.198470Jy sigma=0.888208 ! Fit after self-cal, rms=0.198404Jy sigma=0.887920 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.198404Jy sigma=0.887920 ! Fit after self-cal, rms=0.201403Jy sigma=0.882787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.382 mas, bmaj=8.192 mas, bpa=-4.528 degrees ! Estimated noise=0.536306 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00611816 Jy ! Component: 100 - total flux cleaned = -0.00660929 Jy ! Component: 150 - total flux cleaned = -0.00703429 Jy ! Component: 200 - total flux cleaned = -0.00739828 Jy ! Total flux subtracted in 200 components = -0.00739828 Jy ! Clean residual min=-0.010120 max=0.005859 Jy/beam ! Clean residual mean=0.000012 rms=0.001833 Jy/beam ! Combined flux in latest and established models = 0.923148 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 111 components and 0.923148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.201046Jy sigma=0.880893 ! Fit after self-cal, rms=0.200996Jy sigma=0.880439 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000505926 Jy ! Component: 100 - total flux cleaned = -0.000714309 Jy ! Component: 150 - total flux cleaned = -0.000904047 Jy ! Component: 200 - total flux cleaned = -0.00107942 Jy ! Total flux subtracted in 200 components = -0.00107942 Jy ! Clean residual min=-0.009910 max=0.005604 Jy/beam ! Clean residual mean=0.000011 rms=0.001788 Jy/beam ! Combined flux in latest and established models = 0.922069 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 114 components and 0.922069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.200903Jy sigma=0.880723 ! Fit after self-cal, rms=0.200862Jy sigma=0.880574 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8854 mas, bmaj=3.031 mas, bpa=1.233 degrees ! Estimated noise=0.447704 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8854 x 3.031 at 1.233 degrees (North through East) ! Clean map min=-0.0095017 max=0.58362 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.200862Jy sigma=0.880574 ! Fit after self-cal, rms=0.216068Jy sigma=0.796884 ! Inverting map and beam ! Estimated beam: bmin=0.8859 mas, bmaj=3.043 mas, bpa=1.454 degrees ! Estimated noise=0.447372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00434424 Jy ! Component: 100 - total flux cleaned = -0.00492037 Jy ! Component: 150 - total flux cleaned = -0.00504318 Jy ! Component: 200 - total flux cleaned = -0.0051578 Jy ! Total flux subtracted in 200 components = -0.0051578 Jy ! Clean residual min=-0.008711 max=0.004378 Jy/beam ! Clean residual mean=0.000007 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.916911 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 117 components and 0.916911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.215804Jy sigma=0.791670 ! Fit after self-cal, rms=0.215671Jy sigma=0.790969 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00097205 Jy ! Component: 100 - total flux cleaned = -0.00107708 Jy ! Component: 150 - total flux cleaned = -0.00128134 Jy ! Component: 200 - total flux cleaned = -0.00147119 Jy ! Total flux subtracted in 200 components = -0.00147119 Jy ! Clean residual min=-0.008328 max=0.004048 Jy/beam ! Clean residual mean=0.000006 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.91544 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 119 components and 0.915439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.215539Jy sigma=0.788426 ! Fit after self-cal, rms=0.215492Jy sigma=0.788198 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.215492Jy sigma=0.788198 ! Fit after self-cal, rms=0.217812Jy sigma=0.786257 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6724 mas, bmaj=2.304 mas, bpa=1.825 degrees ! Estimated noise=0.859344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.501983 Jy ! Component: 100 - total flux cleaned = 0.666677 Jy ! Component: 150 - total flux cleaned = 0.739646 Jy ! Component: 200 - total flux cleaned = 0.782829 Jy ! Total flux subtracted in 200 components = 0.782829 Jy ! Clean residual min=-0.014606 max=0.023764 Jy/beam ! Clean residual mean=-0.000069 rms=0.003128 Jy/beam ! Combined flux in latest and established models = 0.782829 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.782829 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8854 mas, bmaj=3.043 mas, bpa=1.48 degrees ! Estimated noise=0.447186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.054453 Jy ! Component: 100 - total flux cleaned = 0.0836211 Jy ! Component: 150 - total flux cleaned = 0.100068 Jy ! Component: 200 - total flux cleaned = 0.10986 Jy ! Total flux subtracted in 200 components = 0.10986 Jy ! Clean residual min=-0.008132 max=0.008445 Jy/beam ! Clean residual mean=-0.000004 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.89269 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 79 components and 0.892689 Jy ! Inverting map ! Added new window around map position (1.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00776692 Jy ! Component: 100 - total flux cleaned = 0.0106614 Jy ! Component: 150 - total flux cleaned = 0.0119941 Jy ! Component: 200 - total flux cleaned = 0.0130874 Jy ! Total flux subtracted in 200 components = 0.0130874 Jy ! Clean residual min=-0.007689 max=0.005174 Jy/beam ! Clean residual mean=0.000007 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 0.905777 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 94 components and 0.905777 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.395 mas, bmaj=8.235 mas, bpa=-4.376 degrees ! Estimated noise=0.534886 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00236918 Jy ! Component: 100 - total flux cleaned = -0.00180977 Jy ! Component: 150 - total flux cleaned = -0.00145669 Jy ! Component: 200 - total flux cleaned = -0.00127932 Jy ! Total flux subtracted in 200 components = -0.00127932 Jy ! Clean residual min=-0.007483 max=0.004772 Jy/beam ! Clean residual mean=0.000010 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.904498 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.15561e-05 Jy ! Component: 100 - total flux cleaned = 9.87156e-05 Jy ! Component: 150 - total flux cleaned = 0.000143391 Jy ! Component: 200 - total flux cleaned = 0.000143249 Jy ! Total flux subtracted in 200 components = 0.000143249 Jy ! Clean residual min=-0.007404 max=0.004781 Jy/beam ! Clean residual mean=0.000010 rms=0.001300 Jy/beam ! Combined flux in latest and established models = 0.904641 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 107 components and 0.904641 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8854 mas, bmaj=3.043 mas, bpa=1.48 degrees ! Estimated noise=0.447186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000781513 Jy ! Component: 100 - total flux cleaned = 0.000781651 Jy ! Component: 150 - total flux cleaned = 0.000696839 Jy ! Component: 200 - total flux cleaned = 0.000618777 Jy ! Total flux subtracted in 200 components = 0.000618777 Jy ! Clean residual min=-0.007339 max=0.005125 Jy/beam ! Clean residual mean=0.000006 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.905259 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 120 components and 0.90526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.216952Jy sigma=0.777087 ! Fit after self-cal, rms=0.216754Jy sigma=0.775160 wmodel J0922-3959_X_map.mod ! Writing 120 model components to file: J0922-3959_X_map.mod wobs J0922-3959_X_uvs.fits ! Writing UV FITS file: J0922-3959_X_uvs.fits wwins J0922-3959_X_map.win ! wwins: Wrote 4 windows to J0922-3959_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.002796 Jy ! Component: 100 - total flux cleaned = -0.00421423 Jy ! Component: 150 - total flux cleaned = -0.00507234 Jy ! Component: 200 - total flux cleaned = -0.00507566 Jy ! Component: 250 - total flux cleaned = -0.00481127 Jy ! Component: 300 - total flux cleaned = -0.00462056 Jy ! Component: 350 - total flux cleaned = -0.00443968 Jy ! Component: 400 - total flux cleaned = -0.0043838 Jy ! Component: 450 - total flux cleaned = -0.00449409 Jy ! Component: 500 - total flux cleaned = -0.00460136 Jy ! Component: 550 - total flux cleaned = -0.00465316 Jy ! Component: 600 - total flux cleaned = -0.00460262 Jy ! Component: 650 - total flux cleaned = -0.00455363 Jy ! Component: 700 - total flux cleaned = -0.00440736 Jy ! Component: 750 - total flux cleaned = -0.00450201 Jy ! Component: 800 - total flux cleaned = -0.00450135 Jy ! Component: 850 - total flux cleaned = -0.00450115 Jy ! Component: 900 - total flux cleaned = -0.00472728 Jy ! Component: 950 - total flux cleaned = -0.00486041 Jy ! Component: 1000 - total flux cleaned = -0.00503564 Jy ! Component: 1050 - total flux cleaned = -0.0051219 Jy ! Component: 1100 - total flux cleaned = -0.00524958 Jy ! Component: 1150 - total flux cleaned = -0.00545964 Jy ! Component: 1200 - total flux cleaned = -0.00566703 Jy ! Component: 1250 - total flux cleaned = -0.00583082 Jy ! Component: 1300 - total flux cleaned = -0.0059529 Jy ! Component: 1350 - total flux cleaned = -0.00623309 Jy ! Component: 1400 - total flux cleaned = -0.00646994 Jy ! Component: 1450 - total flux cleaned = -0.00662654 Jy ! Component: 1500 - total flux cleaned = -0.00681997 Jy ! Component: 1550 - total flux cleaned = -0.00697291 Jy ! Component: 1600 - total flux cleaned = -0.00701035 Jy ! Component: 1650 - total flux cleaned = -0.00715993 Jy ! Component: 1700 - total flux cleaned = -0.00730756 Jy ! Component: 1750 - total flux cleaned = -0.00734396 Jy ! Component: 1800 - total flux cleaned = -0.00745304 Jy ! Component: 1850 - total flux cleaned = -0.00752432 Jy ! Component: 1900 - total flux cleaned = -0.00766637 Jy ! Component: 1950 - total flux cleaned = -0.00773655 Jy ! Component: 2000 - total flux cleaned = -0.00787563 Jy ! Component: 2050 - total flux cleaned = -0.00794415 Jy ! Component: 2100 - total flux cleaned = -0.00804622 Jy ! Component: 2150 - total flux cleaned = -0.00814754 Jy ! Component: 2200 - total flux cleaned = -0.0082819 Jy ! Component: 2250 - total flux cleaned = -0.00831476 Jy ! Component: 2300 - total flux cleaned = -0.0083147 Jy ! Component: 2350 - total flux cleaned = -0.00850986 Jy ! Component: 2400 - total flux cleaned = -0.00860644 Jy ! Component: 2450 - total flux cleaned = -0.00879862 Jy ! Component: 2500 - total flux cleaned = -0.00886225 Jy ! Component: 2550 - total flux cleaned = -0.00898838 Jy ! Component: 2600 - total flux cleaned = -0.0091762 Jy ! Component: 2650 - total flux cleaned = -0.00920705 Jy ! Component: 2700 - total flux cleaned = -0.00939175 Jy ! Component: 2750 - total flux cleaned = -0.00942236 Jy ! Component: 2800 - total flux cleaned = -0.00972472 Jy ! Component: 2850 - total flux cleaned = -0.0097545 Jy ! Component: 2900 - total flux cleaned = -0.00987337 Jy ! Component: 2950 - total flux cleaned = -0.00993261 Jy ! Component: 3000 - total flux cleaned = -0.0101382 Jy ! Component: 3050 - total flux cleaned = -0.0102838 Jy ! Component: 3100 - total flux cleaned = -0.0103416 Jy ! Component: 3150 - total flux cleaned = -0.0105138 Jy ! Component: 3200 - total flux cleaned = -0.0105991 Jy ! Component: 3250 - total flux cleaned = -0.0106559 Jy ! Component: 3300 - total flux cleaned = -0.0107965 Jy ! Component: 3350 - total flux cleaned = -0.0108524 Jy ! Component: 3400 - total flux cleaned = -0.0110188 Jy ! Component: 3450 - total flux cleaned = -0.0111289 Jy ! Component: 3500 - total flux cleaned = -0.0111287 Jy ! Component: 3550 - total flux cleaned = -0.0112375 Jy ! Component: 3600 - total flux cleaned = -0.0111836 Jy ! Component: 3650 - total flux cleaned = -0.0112642 Jy ! Component: 3700 - total flux cleaned = -0.0113439 Jy ! Component: 3750 - total flux cleaned = -0.0113705 Jy ! Component: 3800 - total flux cleaned = -0.0114231 Jy ! Component: 3850 - total flux cleaned = -0.0115275 Jy ! Component: 3900 - total flux cleaned = -0.0115793 Jy ! Component: 3950 - total flux cleaned = -0.0116307 Jy ! Component: 4000 - total flux cleaned = -0.0117334 Jy ! Component: 4050 - total flux cleaned = -0.0118097 Jy ! Total flux subtracted in 4096 components = -0.0118094 Jy ! Clean residual min=-0.001317 max=0.001294 Jy/beam ! Clean residual mean=-0.000010 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.89345 Jy keep ! Adding 334 model components to the UV plane model. ! The established model now contains 453 components and 0.89345 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0922-3959_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8854 x 3.043 at 1.48 degrees (North through East) ! Clean map min=-0.0064156 max=0.60909 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0922-3959_X_map.fits wmodel /vlbi/bp222/temp_maps//J0922-3959_X_map.mod ! Writing 453 model components to file: /vlbi/bp222/temp_maps//J0922-3959_X_map.mod wobs /vlbi/bp222/temp_maps//J0922-3959_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0922-3959_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0922-3959_X_map.win ! wwins: Wrote 5 windows to /vlbi/bp222/temp_maps//J0922-3959_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.609092 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000469953 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.231469 0.231469 0.462939 0.925877 1.85175 3.70351 7.40702 14.814 29.6281 59.2561 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.609 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1296.07 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0922-3959_X_dfm.log closed on Thu Feb 14 22:44:47 2019