! Started logfile: J0922-3959_S_dfm.log on Fri Feb 15 19:49:27 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J0922-3959_S_uvm.fits
! Reading UV FITS file: J0922-3959_S_uvm.fits
! AN table 1: 51 integrations on 28 of 28 possible baselines.
! AN table 2: 17 integrations on 21 of 21 possible baselines.
! AN table 3: 17 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.857585 visibilities/baseline/integration-bin.
! Found source: J0922-3959
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7756 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0922-3959_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 53 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  A total of 15 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 53 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  A total of 15 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 53 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  A total of 15 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 408 telescope corrections were flagged in sub-array 1.
!  A total of 119 telescope corrections were flagged in sub-array 2.
!  A total of 136 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.294216Jy  sigma=12.400526
! Fit after  self-cal, rms=0.413404Jy  sigma=3.271433
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.778 mas, bmaj=9.909 mas, bpa=1.576 degrees
! Estimated noise=1.4618 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.548917 Jy
! Component: 100  -  total flux cleaned = 0.720893 Jy
! Total flux subtracted in 100 components = 0.720893 Jy
! Clean residual min=-0.041747 max=0.105861 Jy/beam
! Clean residual mean=-0.000033 rms=0.014262 Jy/beam
! Combined flux in latest and established models = 0.720894 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.720894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.307585Jy  sigma=3.015962
! Fit after  self-cal, rms=0.307563Jy  sigma=3.015806
! Inverting map 
! Added new window around map position (-0.5, -13.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107518 Jy
! Component: 100  -  total flux cleaned = 0.17876 Jy
! Total flux subtracted in 100 components = 0.17876 Jy
! Clean residual min=-0.035547 max=0.078754 Jy/beam
! Clean residual mean=0.000001 rms=0.010688 Jy/beam
! Combined flux in latest and established models = 0.899653 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 41 components and 0.899653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.246378Jy  sigma=2.192097
! Fit after  self-cal, rms=0.245686Jy  sigma=2.186126
! Inverting map 
! Added new window around map position (-5, 8.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0693664 Jy
! Component: 100  -  total flux cleaned = 0.114385 Jy
! Total flux subtracted in 100 components = 0.114385 Jy
! Clean residual min=-0.031068 max=0.062615 Jy/beam
! Clean residual mean=0.000044 rms=0.008761 Jy/beam
! Combined flux in latest and established models = 1.01404 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 58 components and 1.01404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.216366Jy  sigma=1.832607
! Fit after  self-cal, rms=0.214437Jy  sigma=1.806718
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.454 mas, bmaj=12.03 mas, bpa=0.3515 degrees
! Estimated noise=1.06604 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0602372 Jy
! Component: 100  -  total flux cleaned = 0.0957887 Jy
! Component: 150  -  total flux cleaned = 0.118021 Jy
! Component: 200  -  total flux cleaned = 0.132076 Jy
! Total flux subtracted in 200 components = 0.132076 Jy
! Clean residual min=-0.035003 max=0.036667 Jy/beam
! Clean residual mean=0.000223 rms=0.009272 Jy/beam
! Combined flux in latest and established models = 1.14611 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 88 components and 1.14611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.201066Jy  sigma=1.573310
! Fit after  self-cal, rms=0.200431Jy  sigma=1.563238
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.454 x 12.03 at 0.3515 degrees (North through East)
! Clean map  min=-0.034151  max=0.63936 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     HN        1.30     KP        0.99     LA        0.98     
!   NL        1.08     OV        1.01     PT        1.05     SC        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.95     HN        2.35     KP        0.91     LA        0.90     
!   NL        1.11     OV        0.91     SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.92     KP        0.94     LA        0.87     MK        1.06     
!   NL        1.23     OV        0.90     PT        0.98     SC        1.09     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     HN        1.37     KP        0.98     LA        0.99     
!   NL        1.18     OV        1.01     PT        1.05     SC        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.96     HN        2.49     KP        0.89     LA        0.91     
!   NL        1.02     OV        0.91     SC        1.21     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.92     KP        0.91     LA        0.88     MK        1.07     
!   NL        1.15     OV        0.93     PT        0.97     SC        1.17     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        1.41     KP        0.98     LA        0.99     
!   NL        1.09     OV        1.01     PT        1.06     SC        0.92     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.96     HN        2.46     KP        0.90     LA        0.89     
!   NL        1.07     OV        0.91     SC        1.07     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.92     KP        0.93     LA        0.88     MK        1.09     
!   NL        1.18     OV        0.90     PT        0.98     SC        1.00     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.200431Jy  sigma=1.563238
! Fit after  self-cal, rms=0.174278Jy  sigma=1.042571
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.483 mas, bmaj=12.1 mas, bpa=0.8391 degrees
! Estimated noise=1.11203 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0180587 Jy
! Component: 100  -  total flux cleaned = -0.0225414 Jy
! Component: 150  -  total flux cleaned = -0.0237378 Jy
! Component: 200  -  total flux cleaned = -0.0247392 Jy
! Total flux subtracted in 200 components = -0.0247392 Jy
! Clean residual min=-0.017276 max=0.015726 Jy/beam
! Clean residual mean=0.000141 rms=0.004018 Jy/beam
! Combined flux in latest and established models = 1.12137 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 102 components and 1.12137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.166711Jy  sigma=0.984943
! Fit after  self-cal, rms=0.166892Jy  sigma=0.983539
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.166892Jy  sigma=0.983539
! Fit after  self-cal, rms=0.166667Jy  sigma=0.954249
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.486 mas, bmaj=12.1 mas, bpa=0.9582 degrees
! Estimated noise=1.11388 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.012574 Jy
! Component: 100  -  total flux cleaned = -0.0147261 Jy
! Component: 150  -  total flux cleaned = -0.0160612 Jy
! Component: 200  -  total flux cleaned = -0.0175033 Jy
! Total flux subtracted in 200 components = -0.0175033 Jy
! Clean residual min=-0.015256 max=0.013531 Jy/beam
! Clean residual mean=0.000124 rms=0.003470 Jy/beam
! Combined flux in latest and established models = 1.10387 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 106 components and 1.10387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.162694Jy  sigma=0.924886
! Fit after  self-cal, rms=0.162571Jy  sigma=0.924057
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141 Jy
! Component: 100  -  total flux cleaned = -0.00166658 Jy
! Component: 150  -  total flux cleaned = -0.00166314 Jy
! Component: 200  -  total flux cleaned = -0.00146265 Jy
! Total flux subtracted in 200 components = -0.00146265 Jy
! Clean residual min=-0.014738 max=0.013310 Jy/beam
! Clean residual mean=0.000122 rms=0.003399 Jy/beam
! Combined flux in latest and established models = 1.10241 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 116 components and 1.10241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.161757Jy  sigma=0.915863
! Fit after  self-cal, rms=0.161713Jy  sigma=0.915564
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.161713Jy  sigma=0.915564
! Fit after  self-cal, rms=0.159907Jy  sigma=0.853609
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.49 mas, bmaj=12.12 mas, bpa=1.02 degrees
! Estimated noise=1.11768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00773988 Jy
! Component: 100  -  total flux cleaned = -0.00898142 Jy
! Component: 150  -  total flux cleaned = -0.0100108 Jy
! Component: 200  -  total flux cleaned = -0.0104518 Jy
! Total flux subtracted in 200 components = -0.0104518 Jy
! Clean residual min=-0.010960 max=0.011650 Jy/beam
! Clean residual mean=-0.000038 rms=0.002904 Jy/beam
! Combined flux in latest and established models = 1.09196 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 127 components and 1.09196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.158122Jy  sigma=0.844977
! Fit after  self-cal, rms=0.158142Jy  sigma=0.844616
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00107691 Jy
! Component: 100  -  total flux cleaned = -0.00157682 Jy
! Component: 150  -  total flux cleaned = -0.00187344 Jy
! Component: 200  -  total flux cleaned = -0.00214704 Jy
! Total flux subtracted in 200 components = -0.00214704 Jy
! Clean residual min=-0.010790 max=0.011851 Jy/beam
! Clean residual mean=-0.000042 rms=0.002880 Jy/beam
! Combined flux in latest and established models = 1.08981 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 138 components and 1.08981 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.157682Jy  sigma=0.841772
! Fit after  self-cal, rms=0.157596Jy  sigma=0.841626
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.157596Jy  sigma=0.841626
! Fit after  self-cal, rms=0.159057Jy  sigma=0.836087
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.145 mas, bmaj=27.54 mas, bpa=-3.551 degrees
! Estimated noise=1.31026 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0063377 Jy
! Component: 100  -  total flux cleaned = -0.00685105 Jy
! Component: 150  -  total flux cleaned = -0.00731124 Jy
! Component: 200  -  total flux cleaned = -0.00731368 Jy
! Total flux subtracted in 200 components = -0.00731368 Jy
! Clean residual min=-0.010338 max=0.012148 Jy/beam
! Clean residual mean=-0.000068 rms=0.003923 Jy/beam
! Combined flux in latest and established models = 1.0825 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 147 components and 1.0825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.158223Jy  sigma=0.833025
! Fit after  self-cal, rms=0.158003Jy  sigma=0.832235
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000596604 Jy
! Component: 100  -  total flux cleaned = -0.000606958 Jy
! Component: 150  -  total flux cleaned = -0.000613989 Jy
! Component: 200  -  total flux cleaned = -0.000612399 Jy
! Total flux subtracted in 200 components = -0.000612399 Jy
! Clean residual min=-0.010492 max=0.011932 Jy/beam
! Clean residual mean=-0.000071 rms=0.003902 Jy/beam
! Combined flux in latest and established models = 1.08188 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 151 components and 1.08188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.157717Jy  sigma=0.831796
! Fit after  self-cal, rms=0.157616Jy  sigma=0.831663
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.495 mas, bmaj=12.14 mas, bpa=1.068 degrees
! Estimated noise=1.12066 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.495 x 12.14 at 1.068 degrees (North through East)
! Clean map  min=-0.0094116  max=0.69028 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.157616Jy  sigma=0.831663
! Fit after  self-cal, rms=0.154468Jy  sigma=0.756280
! Inverting map and beam 
! Estimated beam: bmin=3.507 mas, bmaj=12.22 mas, bpa=1.063 degrees
! Estimated noise=1.12365 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00475594 Jy
! Component: 100  -  total flux cleaned = -0.00578092 Jy
! Component: 150  -  total flux cleaned = -0.00632204 Jy
! Component: 200  -  total flux cleaned = -0.00680462 Jy
! Total flux subtracted in 200 components = -0.00680462 Jy
! Clean residual min=-0.009164 max=0.010234 Jy/beam
! Clean residual mean=-0.000035 rms=0.002642 Jy/beam
! Combined flux in latest and established models = 1.07508 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 160 components and 1.07508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.153643Jy  sigma=0.751786
! Fit after  self-cal, rms=0.153599Jy  sigma=0.751609
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000484844 Jy
! Component: 100  -  total flux cleaned = -0.000760885 Jy
! Component: 150  -  total flux cleaned = -0.00101828 Jy
! Component: 200  -  total flux cleaned = -0.00125464 Jy
! Total flux subtracted in 200 components = -0.00125464 Jy
! Clean residual min=-0.008787 max=0.010211 Jy/beam
! Clean residual mean=-0.000038 rms=0.002620 Jy/beam
! Combined flux in latest and established models = 1.07382 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 170 components and 1.07382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.153288Jy  sigma=0.749360
! Fit after  self-cal, rms=0.153256Jy  sigma=0.749177
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.153256Jy  sigma=0.749177
! Fit after  self-cal, rms=0.154460Jy  sigma=0.746868
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.769 mas, bmaj=9.929 mas, bpa=2.36 degrees
! Estimated noise=1.58239 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.59199 Jy
! Component: 100  -  total flux cleaned = 0.757774 Jy
! Component: 150  -  total flux cleaned = 0.843455 Jy
! Component: 200  -  total flux cleaned = 0.900538 Jy
! Total flux subtracted in 200 components = 0.900538 Jy
! Clean residual min=-0.016422 max=0.032915 Jy/beam
! Clean residual mean=-0.000043 rms=0.005004 Jy/beam
! Combined flux in latest and established models = 0.900538 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 63 model components to the UV plane model.
! The established model now contains 63 components and 0.900538 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.51 mas, bmaj=12.23 mas, bpa=1.083 degrees
! Estimated noise=1.12482 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0678403 Jy
! Component: 100  -  total flux cleaned = 0.104504 Jy
! Component: 150  -  total flux cleaned = 0.126045 Jy
! Component: 200  -  total flux cleaned = 0.139165 Jy
! Total flux subtracted in 200 components = 0.139165 Jy
! Clean residual min=-0.009627 max=0.011774 Jy/beam
! Clean residual mean=-0.000089 rms=0.002922 Jy/beam
! Combined flux in latest and established models = 1.0397 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 125 components and 1.0397 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.204 mas, bmaj=27.89 mas, bpa=-3.491 degrees
! Estimated noise=1.30683 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133762 Jy
! Component: 100  -  total flux cleaned = 0.0193398 Jy
! Component: 150  -  total flux cleaned = 0.0207304 Jy
! Component: 200  -  total flux cleaned = 0.0212013 Jy
! Total flux subtracted in 200 components = 0.0212013 Jy
! Clean residual min=-0.010250 max=0.009909 Jy/beam
! Clean residual mean=-0.000093 rms=0.003781 Jy/beam
! Combined flux in latest and established models = 1.0609 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000220201 Jy
! Component: 100  -  total flux cleaned = 0.000532295 Jy
! Component: 150  -  total flux cleaned = 0.000823828 Jy
! Component: 200  -  total flux cleaned = 0.0010073 Jy
! Total flux subtracted in 200 components = 0.0010073 Jy
! Clean residual min=-0.010140 max=0.009966 Jy/beam
! Clean residual mean=-0.000088 rms=0.003752 Jy/beam
! Combined flux in latest and established models = 1.06191 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 139 components and 1.06191 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.51 mas, bmaj=12.23 mas, bpa=1.083 degrees
! Estimated noise=1.12482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00148916 Jy
! Component: 100  -  total flux cleaned = -0.0014789 Jy
! Component: 150  -  total flux cleaned = -0.00134436 Jy
! Component: 200  -  total flux cleaned = -0.00112816 Jy
! Total flux subtracted in 200 components = -0.00112816 Jy
! Clean residual min=-0.008933 max=0.008985 Jy/beam
! Clean residual mean=-0.000051 rms=0.002538 Jy/beam
! Combined flux in latest and established models = 1.06078 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 154 components and 1.06078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.153148Jy  sigma=0.740094
! Fit after  self-cal, rms=0.152911Jy  sigma=0.738059
wmodel J0922-3959_S_map.mod
! Writing 154 model components to file: J0922-3959_S_map.mod
wobs   J0922-3959_S_uvs.fits
! Writing UV FITS file: J0922-3959_S_uvs.fits
wwins  J0922-3959_S_map.win
! wwins: Wrote 3 windows to J0922-3959_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00104124 Jy
! Component: 100  -  total flux cleaned = -3.48013e-05 Jy
! Component: 150  -  total flux cleaned = 0.000656475 Jy
! Component: 200  -  total flux cleaned = 0.00144956 Jy
! Component: 250  -  total flux cleaned = 0.00157708 Jy
! Component: 300  -  total flux cleaned = 0.00206684 Jy
! Component: 350  -  total flux cleaned = 0.00230384 Jy
! Component: 400  -  total flux cleaned = 0.00264988 Jy
! Component: 450  -  total flux cleaned = 0.00276077 Jy
! Component: 500  -  total flux cleaned = 0.00264949 Jy
! Component: 550  -  total flux cleaned = 0.00243539 Jy
! Component: 600  -  total flux cleaned = 0.00233156 Jy
! Component: 650  -  total flux cleaned = 0.00212894 Jy
! Component: 700  -  total flux cleaned = 0.00192968 Jy
! Component: 750  -  total flux cleaned = 0.00173373 Jy
! Component: 800  -  total flux cleaned = 0.00154163 Jy
! Component: 850  -  total flux cleaned = 0.00106692 Jy
! Component: 900  -  total flux cleaned = 0.000977297 Jy
! Component: 950  -  total flux cleaned = 0.000886388 Jy
! Component: 1000  -  total flux cleaned = 0.00115605 Jy
! Component: 1050  -  total flux cleaned = 0.00115434 Jy
! Component: 1100  -  total flux cleaned = 0.00106494 Jy
! Component: 1150  -  total flux cleaned = 0.000980559 Jy
! Component: 1200  -  total flux cleaned = 0.00106548 Jy
! Component: 1250  -  total flux cleaned = 0.000900223 Jy
! Component: 1300  -  total flux cleaned = 0.00065512 Jy
! Component: 1350  -  total flux cleaned = 0.000332514 Jy
! Component: 1400  -  total flux cleaned = 0.000333232 Jy
! Component: 1450  -  total flux cleaned = 0.000253235 Jy
! Component: 1500  -  total flux cleaned = -5.58532e-05 Jy
! Component: 1550  -  total flux cleaned = 2.03266e-05 Jy
! Component: 1600  -  total flux cleaned = -5.57596e-05 Jy
! Component: 1650  -  total flux cleaned = -0.000130498 Jy
! Component: 1700  -  total flux cleaned = -0.000349176 Jy
! Component: 1750  -  total flux cleaned = -0.000491771 Jy
! Component: 1800  -  total flux cleaned = -0.000634107 Jy
! Component: 1850  -  total flux cleaned = -0.000986114 Jy
! Component: 1900  -  total flux cleaned = -0.00126314 Jy
! Component: 1950  -  total flux cleaned = -0.00133106 Jy
! Component: 2000  -  total flux cleaned = -0.00146644 Jy
! Component: 2050  -  total flux cleaned = -0.00153462 Jy
! Component: 2100  -  total flux cleaned = -0.00160157 Jy
! Component: 2150  -  total flux cleaned = -0.00140496 Jy
! Component: 2200  -  total flux cleaned = -0.00186057 Jy
! Component: 2250  -  total flux cleaned = -0.002246 Jy
! Component: 2300  -  total flux cleaned = -0.0021178 Jy
! Component: 2350  -  total flux cleaned = -0.00218133 Jy
! Component: 2400  -  total flux cleaned = -0.0021812 Jy
! Component: 2450  -  total flux cleaned = -0.00242919 Jy
! Component: 2500  -  total flux cleaned = -0.0026117 Jy
! Component: 2550  -  total flux cleaned = -0.00261042 Jy
! Component: 2600  -  total flux cleaned = -0.00260997 Jy
! Component: 2650  -  total flux cleaned = -0.00266925 Jy
! Component: 2700  -  total flux cleaned = -0.00272707 Jy
! Component: 2750  -  total flux cleaned = -0.00290123 Jy
! Component: 2800  -  total flux cleaned = -0.00272732 Jy
! Component: 2850  -  total flux cleaned = -0.00261262 Jy
! Component: 2900  -  total flux cleaned = -0.00261318 Jy
! Component: 2950  -  total flux cleaned = -0.00266984 Jy
! Component: 3000  -  total flux cleaned = -0.00267022 Jy
! Component: 3050  -  total flux cleaned = -0.00267104 Jy
! Component: 3100  -  total flux cleaned = -0.0027263 Jy
! Component: 3150  -  total flux cleaned = -0.00267278 Jy
! Component: 3200  -  total flux cleaned = -0.00288711 Jy
! Component: 3250  -  total flux cleaned = -0.00278026 Jy
! Component: 3300  -  total flux cleaned = -0.00267446 Jy
! Component: 3350  -  total flux cleaned = -0.00293617 Jy
! Component: 3400  -  total flux cleaned = -0.00298749 Jy
! Component: 3450  -  total flux cleaned = -0.00314173 Jy
! Component: 3500  -  total flux cleaned = -0.00314236 Jy
! Component: 3550  -  total flux cleaned = -0.00349562 Jy
! Component: 3600  -  total flux cleaned = -0.00359613 Jy
! Component: 3650  -  total flux cleaned = -0.00354667 Jy
! Component: 3700  -  total flux cleaned = -0.00389317 Jy
! Component: 3750  -  total flux cleaned = -0.00389295 Jy
! Component: 3800  -  total flux cleaned = -0.00389303 Jy
! Component: 3850  -  total flux cleaned = -0.00413445 Jy
! Component: 3900  -  total flux cleaned = -0.0042302 Jy
! Component: 3950  -  total flux cleaned = -0.00423006 Jy
! Component: 4000  -  total flux cleaned = -0.00432427 Jy
! Component: 4050  -  total flux cleaned = -0.00432412 Jy
! Total flux subtracted in 4096 components = -0.0042305 Jy
! Clean residual min=-0.002893 max=0.003150 Jy/beam
! Clean residual mean=-0.000021 rms=0.001029 Jy/beam
! Combined flux in latest and established models = 1.05655 Jy
keep
! Adding 409 model components to the UV plane model.
! The established model now contains 563 components and 1.05655 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J0922-3959_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.51 x 12.23 at 1.083 degrees (North through East)
! Clean map  min=-0.0079693  max=0.7306 Jy/beam
! Writing clean map to FITS file: J0922-3959_S_map.fits
wmodel J0922-3959_S_map.mod
! Writing 563 model components to file: J0922-3959_S_map.mod
wobs   J0922-3959_S_uvs.fits
! Writing UV FITS file: J0922-3959_S_uvs.fits
wwins  J0922-3959_S_map.win
! wwins: Wrote 4 windows to J0922-3959_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.730602 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00101038 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.414881 0.414881 0.829762 1.65952 3.31905 6.63809 13.2762 26.5524 53.1048
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.73 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  723.099 
quit
! Quitting program
! Log file J0922-3959_S_dfm.log closed on Fri Feb 15 19:49:32 2019