! Started logfile: J0813+2435_S_dfm.log on Fri Feb 15 19:48:00 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J0813+2435_S_uvm.fits
! Reading UV FITS file: J0813+2435_S_uvm.fits
! AN table 1: 46 integrations on 28 of 28 possible baselines.
! AN table 2: 45 integrations on 28 of 28 possible baselines.
! AN table 3: 24 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.93054 visibilities/baseline/integration-bin.
! Found source: J0813+2435
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 13504 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0813+2435_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 29 telescope corrections were flagged in sub-array 2.
!  A total of 3 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 29 telescope corrections were flagged in sub-array 2.
!  A total of 3 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 29 telescope corrections were flagged in sub-array 2.
!  A total of 3 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 189 telescope corrections were flagged in sub-array 1.
!  A total of 183 telescope corrections were flagged in sub-array 2.
!  A total of 240 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.043004Jy  sigma=17.613948
! Fit after  self-cal, rms=0.680359Jy  sigma=11.490360
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.722 mas, bmaj=7.074 mas, bpa=-9.214 degrees
! Estimated noise=0.581719 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.259248 Jy
! Component: 100  -  total flux cleaned = 0.316679 Jy
! Total flux subtracted in 100 components = 0.316679 Jy
! Clean residual min=-0.007843 max=0.018475 Jy/beam
! Clean residual mean=0.000027 rms=0.002208 Jy/beam
! Combined flux in latest and established models = 0.316679 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.316679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.071873Jy  sigma=1.131728
! Fit after  self-cal, rms=0.071873Jy  sigma=1.131663
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0179774 Jy
! Component: 100  -  total flux cleaned = 0.0264036 Jy
! Total flux subtracted in 100 components = 0.0264036 Jy
! Clean residual min=-0.007576 max=0.008313 Jy/beam
! Clean residual mean=0.000022 rms=0.001848 Jy/beam
! Combined flux in latest and established models = 0.343082 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.343082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.066277Jy  sigma=1.047467
! Fit after  self-cal, rms=0.066281Jy  sigma=1.047396
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.226 mas, bmaj=8.099 mas, bpa=-9.406 degrees
! Estimated noise=0.425418 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00581995 Jy
! Component: 100  -  total flux cleaned = 0.00784206 Jy
! Component: 150  -  total flux cleaned = 0.00801465 Jy
! Component: 200  -  total flux cleaned = 0.00823233 Jy
! Total flux subtracted in 200 components = 0.00823233 Jy
! Clean residual min=-0.008166 max=0.007153 Jy/beam
! Clean residual mean=0.000022 rms=0.001908 Jy/beam
! Combined flux in latest and established models = 0.351315 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 36 components and 0.351315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.065501Jy  sigma=1.040406
! Fit after  self-cal, rms=0.065501Jy  sigma=1.040353
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.226 x 8.099 at -9.406 degrees (North through East)
! Clean map  min=-0.0079873  max=0.33592 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.94     HN        0.97     LA        0.97     
!   MK        0.96     NL        1.00     OV        0.96     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.01     HN        1.01     KP        1.01     
!   MK        1.03     NL        0.92     OV        1.04     SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.06     FD        1.10     HN        1.08     KP        1.04     
!   LA        1.01     MK        1.09     NL        1.10     OV        1.08     
!   PT        1.10     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        0.98     LA        0.96     
!   MK        0.97     NL        0.94     OV        0.98     PT        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.23     FD        1.00     HN        1.04     KP        1.02     
!   MK        1.04     NL        0.79     OV        1.02     SC        0.78     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.93     FD        1.13     HN        1.07     KP        1.05     
!   LA        1.00     MK        1.12     NL        0.75     OV        1.06     
!   PT        1.07     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        0.97     LA        0.91     
!   MK        0.98     NL        0.99     OV        0.97     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.93     FD        1.00     HN        1.06     KP        1.02     
!   MK        1.03     NL        1.00     OV        1.04     SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.99     FD        1.12     HN        1.06     KP        1.04     
!   LA        1.01     MK        1.12     NL        0.98     OV        1.07     
!   PT        1.08     SC        1.00     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.065501Jy  sigma=1.040353
! Fit after  self-cal, rms=0.054964Jy  sigma=0.853591
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.226 mas, bmaj=8.155 mas, bpa=-9.586 degrees
! Estimated noise=0.425912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000882674 Jy
! Component: 100  -  total flux cleaned = -0.000932168 Jy
! Component: 150  -  total flux cleaned = -0.00100939 Jy
! Component: 200  -  total flux cleaned = -0.00103776 Jy
! Total flux subtracted in 200 components = -0.00103776 Jy
! Clean residual min=-0.003234 max=0.003395 Jy/beam
! Clean residual mean=-0.000001 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.350277 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 47 components and 0.350277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.054833Jy  sigma=0.852669
! Fit after  self-cal, rms=0.054833Jy  sigma=0.852487
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.054833Jy  sigma=0.852487
! Fit after  self-cal, rms=0.054759Jy  sigma=0.839810
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.221 mas, bmaj=8.169 mas, bpa=-9.642 degrees
! Estimated noise=0.427264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00049738 Jy
! Component: 100  -  total flux cleaned = 0.000351829 Jy
! Component: 150  -  total flux cleaned = 0.000311632 Jy
! Component: 200  -  total flux cleaned = 0.000282495 Jy
! Total flux subtracted in 200 components = 0.000282495 Jy
! Clean residual min=-0.002900 max=0.003305 Jy/beam
! Clean residual mean=0.000001 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.350559 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 54 components and 0.350559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.054642Jy  sigma=0.839085
! Fit after  self-cal, rms=0.054644Jy  sigma=0.839074
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-41.5, 45).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000249748 Jy
! Component: 100  -  total flux cleaned = 8.30804e-05 Jy
! Component: 150  -  total flux cleaned = -0.00022506 Jy
! Component: 200  -  total flux cleaned = -0.000482447 Jy
! Total flux subtracted in 200 components = -0.000482447 Jy
! Clean residual min=-0.002919 max=0.002541 Jy/beam
! Clean residual mean=0.000002 rms=0.000681 Jy/beam
! Combined flux in latest and established models = 0.350077 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 71 components and 0.350077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.054352Jy  sigma=0.835065
! Fit after  self-cal, rms=0.054341Jy  sigma=0.834850
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.054341Jy  sigma=0.834850
! Fit after  self-cal, rms=0.049486Jy  sigma=0.796757
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.221 mas, bmaj=8.167 mas, bpa=-9.688 degrees
! Estimated noise=0.426867 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000205206 Jy
! Component: 100  -  total flux cleaned = 0.000402609 Jy
! Component: 150  -  total flux cleaned = 0.000573442 Jy
! Component: 200  -  total flux cleaned = 0.000674155 Jy
! Total flux subtracted in 200 components = 0.000674155 Jy
! Clean residual min=-0.001255 max=0.001614 Jy/beam
! Clean residual mean=0.000003 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.350751 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 92 components and 0.350751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.049449Jy  sigma=0.796160
! Fit after  self-cal, rms=0.049443Jy  sigma=0.796104
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-114, -100.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00142317 Jy
! Component: 100  -  total flux cleaned = 0.00186338 Jy
! Component: 150  -  total flux cleaned = 0.00203586 Jy
! Component: 200  -  total flux cleaned = 0.0022141 Jy
! Total flux subtracted in 200 components = 0.0022141 Jy
! Clean residual min=-0.001230 max=0.001367 Jy/beam
! Clean residual mean=0.000003 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.352965 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 108 components and 0.352965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.049392Jy  sigma=0.795359
! Fit after  self-cal, rms=0.049392Jy  sigma=0.795315
! Inverting map 
! Added new window around map position (52.5, -117.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109444 Jy
! Component: 100  -  total flux cleaned = 1.61913e-05 Jy
! Component: 150  -  total flux cleaned = 6.26568e-05 Jy
! Component: 200  -  total flux cleaned = 0.000105023 Jy
! Total flux subtracted in 200 components = 0.000105023 Jy
! Clean residual min=-0.001118 max=0.001229 Jy/beam
! Clean residual mean=0.000003 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.35307 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 130 components and 0.35307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.049346Jy  sigma=0.794597
! Fit after  self-cal, rms=0.049344Jy  sigma=0.794538
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.049344Jy  sigma=0.794538
! Fit after  self-cal, rms=0.049355Jy  sigma=0.794377
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.794 mas, bmaj=10.35 mas, bpa=-6.952 degrees
! Estimated noise=0.530546 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157439 Jy
! Component: 100  -  total flux cleaned = 0.000423976 Jy
! Component: 150  -  total flux cleaned = 0.00053175 Jy
! Component: 200  -  total flux cleaned = 0.000678422 Jy
! Total flux subtracted in 200 components = 0.000678422 Jy
! Clean residual min=-0.001170 max=0.001060 Jy/beam
! Clean residual mean=0.000006 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.353749 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 154 components and 0.353749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.049345Jy  sigma=0.794202
! Fit after  self-cal, rms=0.049345Jy  sigma=0.794193
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000155148 Jy
! Component: 100  -  total flux cleaned = 0.00027352 Jy
! Component: 150  -  total flux cleaned = 0.000384186 Jy
! Component: 200  -  total flux cleaned = 0.000487529 Jy
! Total flux subtracted in 200 components = 0.000487529 Jy
! Clean residual min=-0.001141 max=0.001044 Jy/beam
! Clean residual mean=0.000006 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.354236 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 163 components and 0.354236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.049340Jy  sigma=0.794130
! Fit after  self-cal, rms=0.049340Jy  sigma=0.794125
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.221 mas, bmaj=8.166 mas, bpa=-9.698 degrees
! Estimated noise=0.427066 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.221 x 8.166 at -9.698 degrees (North through East)
! Clean map  min=-0.0014337  max=0.33763 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.713 mas, bmaj=7.141 mas, bpa=-9.64 degrees
! Estimated noise=0.585226 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.260806 Jy
! Component: 100  -  total flux cleaned = 0.317984 Jy
! Component: 150  -  total flux cleaned = 0.33548 Jy
! Component: 200  -  total flux cleaned = 0.344135 Jy
! Total flux subtracted in 200 components = 0.344135 Jy
! Clean residual min=-0.002472 max=0.004162 Jy/beam
! Clean residual mean=0.000003 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.344135 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.344135 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.221 mas, bmaj=8.166 mas, bpa=-9.698 degrees
! Estimated noise=0.427066 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00517195 Jy
! Component: 100  -  total flux cleaned = 0.00788553 Jy
! Component: 150  -  total flux cleaned = 0.00930836 Jy
! Component: 200  -  total flux cleaned = 0.0103047 Jy
! Total flux subtracted in 200 components = 0.0103047 Jy
! Clean residual min=-0.001345 max=0.001493 Jy/beam
! Clean residual mean=0.000002 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.35444 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 37 components and 0.35444 Jy
! Inverting map 
! Added new window around map position (35.5, -15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000803602 Jy
! Component: 100  -  total flux cleaned = 0.00105705 Jy
! Component: 150  -  total flux cleaned = 0.00123892 Jy
! Component: 200  -  total flux cleaned = 0.00132123 Jy
! Total flux subtracted in 200 components = 0.00132123 Jy
! Clean residual min=-0.001154 max=0.001214 Jy/beam
! Clean residual mean=0.000001 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.355761 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 52 components and 0.355761 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.794 mas, bmaj=10.35 mas, bpa=-6.952 degrees
! Estimated noise=0.530546 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000101309 Jy
! Component: 100  -  total flux cleaned = -0.000238593 Jy
! Component: 150  -  total flux cleaned = -0.000352871 Jy
! Component: 200  -  total flux cleaned = -0.000354565 Jy
! Total flux subtracted in 200 components = -0.000354565 Jy
! Clean residual min=-0.001133 max=0.001140 Jy/beam
! Clean residual mean=0.000003 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.355406 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.33577e-05 Jy
! Component: 100  -  total flux cleaned = 1.7754e-05 Jy
! Component: 150  -  total flux cleaned = -9.54405e-07 Jy
! Component: 200  -  total flux cleaned = 3.33224e-05 Jy
! Total flux subtracted in 200 components = 3.33224e-05 Jy
! Clean residual min=-0.001089 max=0.001108 Jy/beam
! Clean residual mean=0.000004 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.35544 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 93 components and 0.35544 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.221 mas, bmaj=8.166 mas, bpa=-9.698 degrees
! Estimated noise=0.427066 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.49903e-05 Jy
! Component: 100  -  total flux cleaned = -3.3699e-05 Jy
! Component: 150  -  total flux cleaned = 2.151e-05 Jy
! Component: 200  -  total flux cleaned = 4.7534e-05 Jy
! Total flux subtracted in 200 components = 4.7534e-05 Jy
! Clean residual min=-0.001137 max=0.001088 Jy/beam
! Clean residual mean=0.000002 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.355487 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 117 components and 0.355487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.049396Jy  sigma=0.794709
! Fit after  self-cal, rms=0.049393Jy  sigma=0.794650
wmodel J0813+2435_S_map.mod
! Writing 117 model components to file: J0813+2435_S_map.mod
wobs   J0813+2435_S_uvs.fits
! Writing UV FITS file: J0813+2435_S_uvs.fits
wwins  J0813+2435_S_map.win
! wwins: Wrote 5 windows to J0813+2435_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.87367e-05 Jy
! Component: 100  -  total flux cleaned = 0.000116048 Jy
! Component: 150  -  total flux cleaned = 0.000135049 Jy
! Component: 200  -  total flux cleaned = 0.000171305 Jy
! Component: 250  -  total flux cleaned = 0.00018881 Jy
! Component: 300  -  total flux cleaned = 0.000205617 Jy
! Component: 350  -  total flux cleaned = 0.000255769 Jy
! Component: 400  -  total flux cleaned = 0.000255673 Jy
! Component: 450  -  total flux cleaned = 0.000271642 Jy
! Component: 500  -  total flux cleaned = 0.000303499 Jy
! Component: 550  -  total flux cleaned = 0.000350535 Jy
! Component: 600  -  total flux cleaned = 0.000365633 Jy
! Component: 650  -  total flux cleaned = 0.000380827 Jy
! Component: 700  -  total flux cleaned = 0.00036582 Jy
! Component: 750  -  total flux cleaned = 0.000380909 Jy
! Component: 800  -  total flux cleaned = 0.000381081 Jy
! Component: 850  -  total flux cleaned = 0.000380958 Jy
! Component: 900  -  total flux cleaned = 0.000352141 Jy
! Component: 950  -  total flux cleaned = 0.000295401 Jy
! Component: 1000  -  total flux cleaned = 0.000267418 Jy
! Component: 1050  -  total flux cleaned = 0.000239496 Jy
! Component: 1100  -  total flux cleaned = 0.000157134 Jy
! Component: 1150  -  total flux cleaned = 0.000143847 Jy
! Component: 1200  -  total flux cleaned = 0.000103467 Jy
! Component: 1250  -  total flux cleaned = 9.02116e-05 Jy
! Component: 1300  -  total flux cleaned = 0.000103413 Jy
! Component: 1350  -  total flux cleaned = 9.03159e-05 Jy
! Component: 1400  -  total flux cleaned = 7.71004e-05 Jy
! Component: 1450  -  total flux cleaned = 5.13193e-05 Jy
! Component: 1500  -  total flux cleaned = 2.59535e-05 Jy
! Component: 1550  -  total flux cleaned = 2.58956e-05 Jy
! Component: 1600  -  total flux cleaned = 9.21612e-07 Jy
! Component: 1650  -  total flux cleaned = -1.13141e-05 Jy
! Component: 1700  -  total flux cleaned = -1.13444e-05 Jy
! Component: 1750  -  total flux cleaned = -2.34005e-05 Jy
! Component: 1800  -  total flux cleaned = -5.944e-05 Jy
! Component: 1850  -  total flux cleaned = -7.12442e-05 Jy
! Component: 1900  -  total flux cleaned = -4.75062e-05 Jy
! Component: 1950  -  total flux cleaned = -7.10234e-05 Jy
! Component: 2000  -  total flux cleaned = -8.27976e-05 Jy
! Component: 2050  -  total flux cleaned = -7.13961e-05 Jy
! Component: 2100  -  total flux cleaned = -0.000105766 Jy
! Component: 2150  -  total flux cleaned = -7.16642e-05 Jy
! Component: 2200  -  total flux cleaned = -0.000116694 Jy
! Component: 2250  -  total flux cleaned = -0.000105476 Jy
! Component: 2300  -  total flux cleaned = -7.20794e-05 Jy
! Component: 2350  -  total flux cleaned = -7.20182e-05 Jy
! Component: 2400  -  total flux cleaned = -5.02344e-05 Jy
! Component: 2450  -  total flux cleaned = -1.77186e-05 Jy
! Component: 2500  -  total flux cleaned = -6.08772e-05 Jy
! Component: 2550  -  total flux cleaned = -6.09412e-05 Jy
! Component: 2600  -  total flux cleaned = -2.8989e-05 Jy
! Component: 2650  -  total flux cleaned = -1.84933e-05 Jy
! Component: 2700  -  total flux cleaned = -1.85883e-05 Jy
! Component: 2750  -  total flux cleaned = -8.12279e-05 Jy
! Component: 2800  -  total flux cleaned = -7.08776e-05 Jy
! Component: 2850  -  total flux cleaned = -5.03444e-05 Jy
! Component: 2900  -  total flux cleaned = -9.11443e-05 Jy
! Component: 2950  -  total flux cleaned = -7.08193e-05 Jy
! Component: 3000  -  total flux cleaned = -7.07132e-05 Jy
! Component: 3050  -  total flux cleaned = -5.07835e-05 Jy
! Component: 3100  -  total flux cleaned = -8.06139e-05 Jy
! Component: 3150  -  total flux cleaned = -3.12291e-05 Jy
! Component: 3200  -  total flux cleaned = -8.02209e-05 Jy
! Component: 3250  -  total flux cleaned = -7.05326e-05 Jy
! Component: 3300  -  total flux cleaned = -9.94948e-05 Jy
! Component: 3350  -  total flux cleaned = -7.07453e-05 Jy
! Component: 3400  -  total flux cleaned = -5.15888e-05 Jy
! Component: 3450  -  total flux cleaned = -8.01158e-05 Jy
! Component: 3500  -  total flux cleaned = -4.23915e-05 Jy
! Component: 3550  -  total flux cleaned = -0.000108092 Jy
! Component: 3600  -  total flux cleaned = -0.000108019 Jy
! Component: 3650  -  total flux cleaned = -0.000108023 Jy
! Component: 3700  -  total flux cleaned = -8.031e-05 Jy
! Component: 3750  -  total flux cleaned = -9.86357e-05 Jy
! Component: 3800  -  total flux cleaned = -9.85178e-05 Jy
! Component: 3850  -  total flux cleaned = -9.84738e-05 Jy
! Component: 3900  -  total flux cleaned = -0.000134464 Jy
! Component: 3950  -  total flux cleaned = -0.000107697 Jy
! Component: 4000  -  total flux cleaned = -0.000107659 Jy
! Component: 4050  -  total flux cleaned = -9.88278e-05 Jy
! Total flux subtracted in 4096 components = -0.00012514 Jy
! Clean residual min=-0.000529 max=0.000524 Jy/beam
! Clean residual mean=0.000001 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.355362 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 420 components and 0.355362 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J0813+2435_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.221 x 8.166 at -9.698 degrees (North through East)
! Clean map  min=-0.0014455  max=0.3377 Jy/beam
! Writing clean map to FITS file: J0813+2435_S_map.fits
wmodel J0813+2435_S_map.mod
! Writing 420 model components to file: J0813+2435_S_map.mod
wobs   J0813+2435_S_uvs.fits
! Writing UV FITS file: J0813+2435_S_uvs.fits
wwins  J0813+2435_S_map.win
! wwins: Wrote 6 windows to J0813+2435_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.337705 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000163383 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.145141 0.145141 0.290283 0.580566 1.16113 2.32226 4.64453 9.28905 18.5781 37.1562 74.3124
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.337 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2066.95 
quit
! Quitting program
! Log file J0813+2435_S_dfm.log closed on Fri Feb 15 19:48:05 2019