! Started logfile: /vlbi/bp222/temp_maps//J0751+3313_X_dfm.log on Thu Feb 14 22:39:25 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0751+3313_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0751+3313_X_uvm.fits ! AN table 1: 32 integrations on 36 of 36 possible baselines. ! AN table 2: 30 integrations on 28 of 28 possible baselines. ! AN table 3: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.97461 visibilities/baseline/integration-bin. ! Found source: J0751+3313 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 32244 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0751+3313_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.089852Jy sigma=18.150920 ! Fit after self-cal, rms=0.624115Jy sigma=10.046571 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6993 mas, bmaj=1.553 mas, bpa=-6.023 degrees ! Estimated noise=0.478138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.284822 Jy ! Component: 100 - total flux cleaned = 0.391262 Jy ! Total flux subtracted in 100 components = 0.391262 Jy ! Clean residual min=-0.017801 max=0.047678 Jy/beam ! Clean residual mean=0.000033 rms=0.003918 Jy/beam ! Combined flux in latest and established models = 0.391262 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.391262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123159Jy sigma=2.062307 ! Fit after self-cal, rms=0.119982Jy sigma=2.022552 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0604893 Jy ! Component: 100 - total flux cleaned = 0.0929347 Jy ! Total flux subtracted in 100 components = 0.0929347 Jy ! Clean residual min=-0.010647 max=0.017605 Jy/beam ! Clean residual mean=0.000014 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 0.484197 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.484197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077251Jy sigma=1.243313 ! Fit after self-cal, rms=0.075271Jy sigma=1.218945 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245504 Jy ! Component: 100 - total flux cleaned = 0.0386663 Jy ! Total flux subtracted in 100 components = 0.0386663 Jy ! Clean residual min=-0.009068 max=0.008175 Jy/beam ! Clean residual mean=0.000005 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.522863 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.522863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065505Jy sigma=1.037606 ! Fit after self-cal, rms=0.064921Jy sigma=1.030716 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108253 Jy ! Component: 100 - total flux cleaned = 0.0141798 Jy ! Total flux subtracted in 100 components = 0.0141798 Jy ! Clean residual min=-0.009116 max=0.007061 Jy/beam ! Clean residual mean=0.000003 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 0.537043 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 20 components and 0.537043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063050Jy sigma=0.996363 ! Fit after self-cal, rms=0.062863Jy sigma=0.994390 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8935 mas, bmaj=1.885 mas, bpa=-4.824 degrees ! Estimated noise=0.253621 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00657773 Jy ! Component: 100 - total flux cleaned = 0.00873106 Jy ! Component: 150 - total flux cleaned = 0.0095242 Jy ! Component: 200 - total flux cleaned = 0.0102218 Jy ! Total flux subtracted in 200 components = 0.0102218 Jy ! Clean residual min=-0.008641 max=0.007192 Jy/beam ! Clean residual mean=-0.000003 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 0.547265 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.547264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062132Jy sigma=0.980951 ! Fit after self-cal, rms=0.062010Jy sigma=0.979643 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8935 x 1.885 at -4.824 degrees (North through East) ! Clean map min=-0.0081162 max=0.37656 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.99 KP 0.99 ! LA 0.97 MK 0.99 NL 0.98 OV 0.96 ! PT 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 HN 1.01 KP 1.00 ! MK 1.01 NL 0.98 OV 1.02 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.00 HN 0.85 KP 1.03 ! LA 0.99 MK 1.07 NL 1.22 OV 0.91 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.00 KP 0.98 ! LA 0.98 MK 1.02 NL 0.98 OV 0.97 ! PT 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.97 HN 1.01 KP 1.02 ! MK 0.99 NL 1.00 OV 1.02 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.99 HN 0.85 KP 1.04 ! LA 0.98 MK 1.08 NL 1.20 OV 0.91 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.99 KP 0.99 ! LA 0.98 MK 1.01 NL 0.99 OV 0.96 ! PT 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.99 HN 1.00 KP 1.00 ! MK 0.98 NL 1.00 OV 1.02 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.01 HN 0.86 KP 1.03 ! LA 0.99 MK 1.08 NL 1.19 OV 0.92 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.00 KP 0.99 ! LA 0.98 MK 1.02 NL 0.99 OV 0.96 ! PT 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.00 HN 1.01 KP 1.01 ! MK 0.97 NL 1.00 OV 1.01 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.99 HN 0.86 KP 1.04 ! LA 1.00 MK 1.06 NL 1.20 OV 0.91 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.00 KP 1.00 ! LA 0.99 MK 0.99 NL 0.99 OV 0.96 ! PT 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.98 HN 1.01 KP 1.02 ! MK 1.00 NL 0.99 OV 1.01 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.99 HN 0.85 KP 1.05 ! LA 0.99 MK 1.08 NL 1.20 OV 0.92 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.99 KP 1.00 ! LA 0.98 MK 1.00 NL 0.98 OV 0.95 ! PT 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 HN 1.02 KP 1.00 ! MK 0.98 NL 0.99 OV 1.02 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00 HN 0.86 KP 1.04 ! LA 1.00 MK 1.07 NL 1.20 OV 0.92 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.99 KP 0.98 ! LA 0.99 MK 1.01 NL 1.00 OV 0.96 ! PT 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.99 HN 1.01 KP 1.00 ! MK 0.96 NL 0.99 OV 1.03 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.00 HN 0.85 KP 1.05 ! LA 1.00 MK 1.07 NL 1.19 OV 0.93 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.99 KP 0.99 ! LA 0.99 MK 1.01 NL 0.99 OV 0.95 ! PT 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.01 HN 1.00 KP 1.00 ! MK 0.94 NL 0.99 OV 1.02 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.00 HN 0.87 KP 1.04 ! LA 1.00 MK 1.07 NL 1.19 OV 0.92 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.00 KP 0.99 ! LA 0.97 MK 1.01 NL 0.99 OV 0.96 ! PT 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.98 HN 1.01 KP 1.00 ! MK 0.95 NL 1.00 OV 1.03 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.01 HN 0.86 KP 1.06 ! LA 0.99 MK 1.08 NL 1.20 OV 0.92 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 0.99 KP 1.00 ! LA 0.98 MK 1.00 NL 0.99 OV 0.96 ! PT 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.99 HN 0.99 KP 1.01 ! MK 0.93 NL 0.99 OV 1.00 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00 HN 0.86 KP 1.06 ! LA 1.00 MK 1.09 NL 1.18 OV 0.92 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.01 KP 1.00 ! LA 0.98 MK 1.01 NL 0.98 OV 0.97 ! PT 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.98 HN 1.02 KP 1.01 ! MK 0.92 NL 1.00 OV 1.00 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.00 HN 0.86 KP 1.05 ! LA 0.99 MK 1.07 NL 1.21 OV 0.92 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.01 KP 1.00 ! LA 0.97 MK 1.03 NL 1.00 OV 0.96 ! PT 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.98 HN 1.02 KP 1.00 ! MK 0.92 NL 0.98 OV 1.02 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.00 HN 0.87 KP 1.07 ! LA 1.01 MK 1.06 NL 1.20 OV 0.92 ! PT 0.96 SC 1.01 ! ! ! Fit before self-cal, rms=0.062010Jy sigma=0.979643 ! Fit after self-cal, rms=0.055171Jy sigma=0.848853 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8893 mas, bmaj=1.89 mas, bpa=-5.173 degrees ! Estimated noise=0.253013 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214815 Jy ! Component: 100 - total flux cleaned = 0.00298484 Jy ! Component: 150 - total flux cleaned = 0.00337364 Jy ! Component: 200 - total flux cleaned = 0.00344144 Jy ! Total flux subtracted in 200 components = 0.00344144 Jy ! Clean residual min=-0.002241 max=0.002176 Jy/beam ! Clean residual mean=-0.000000 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.550706 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 0.550706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054887Jy sigma=0.844334 ! Fit after self-cal, rms=0.054862Jy sigma=0.843837 ! Inverting map ! Added new window around map position (9.4, -22.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151088 Jy ! Component: 100 - total flux cleaned = 0.00231349 Jy ! Component: 150 - total flux cleaned = 0.0027652 Jy ! Component: 200 - total flux cleaned = 0.00294406 Jy ! Total flux subtracted in 200 components = 0.00294406 Jy ! Clean residual min=-0.001998 max=0.001831 Jy/beam ! Clean residual mean=-0.000000 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.55365 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 54 components and 0.55365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054689Jy sigma=0.840929 ! Fit after self-cal, rms=0.054659Jy sigma=0.840651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054659Jy sigma=0.840651 ! Fit after self-cal, rms=0.054426Jy sigma=0.838677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8884 mas, bmaj=1.889 mas, bpa=-5.163 degrees ! Estimated noise=0.252724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102344 Jy ! Component: 100 - total flux cleaned = 0.00171433 Jy ! Component: 150 - total flux cleaned = 0.00220979 Jy ! Component: 200 - total flux cleaned = 0.00250898 Jy ! Total flux subtracted in 200 components = 0.00250898 Jy ! Clean residual min=-0.001854 max=0.001901 Jy/beam ! Clean residual mean=-0.000000 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.556159 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 59 components and 0.556159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054299Jy sigma=0.836623 ! Fit after self-cal, rms=0.054273Jy sigma=0.836373 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000552761 Jy ! Component: 100 - total flux cleaned = 0.000550858 Jy ! Component: 150 - total flux cleaned = 0.000655882 Jy ! Component: 200 - total flux cleaned = 0.000754233 Jy ! Total flux subtracted in 200 components = 0.000754233 Jy ! Clean residual min=-0.001768 max=0.001699 Jy/beam ! Clean residual mean=-0.000000 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.556913 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 71 components and 0.556913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054146Jy sigma=0.834483 ! Fit after self-cal, rms=0.054128Jy sigma=0.834304 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054128Jy sigma=0.834304 ! Fit after self-cal, rms=0.053919Jy sigma=0.831199 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.888 mas, bmaj=1.888 mas, bpa=-5.166 degrees ! Estimated noise=0.252644 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000851752 Jy ! Component: 100 - total flux cleaned = 0.0012783 Jy ! Component: 150 - total flux cleaned = 0.00150904 Jy ! Component: 200 - total flux cleaned = 0.00163707 Jy ! Total flux subtracted in 200 components = 0.00163707 Jy ! Clean residual min=-0.001552 max=0.001480 Jy/beam ! Clean residual mean=0.000001 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.55855 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 78 components and 0.55855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053824Jy sigma=0.829814 ! Fit after self-cal, rms=0.053809Jy sigma=0.829648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.6687e-05 Jy ! Component: 100 - total flux cleaned = 9.64217e-05 Jy ! Component: 150 - total flux cleaned = 0.000176083 Jy ! Component: 200 - total flux cleaned = 0.000214098 Jy ! Total flux subtracted in 200 components = 0.000214098 Jy ! Clean residual min=-0.001520 max=0.001461 Jy/beam ! Clean residual mean=0.000001 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.558764 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 80 components and 0.558765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053742Jy sigma=0.828672 ! Fit after self-cal, rms=0.053728Jy sigma=0.828525 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053728Jy sigma=0.828525 ! Fit after self-cal, rms=0.053681Jy sigma=0.828432 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.042 mas, bmaj=2.68 mas, bpa=-1.937 degrees ! Estimated noise=0.313942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101029 Jy ! Component: 100 - total flux cleaned = 0.00149096 Jy ! Component: 150 - total flux cleaned = 0.00184582 Jy ! Component: 200 - total flux cleaned = 0.00197876 Jy ! Total flux subtracted in 200 components = 0.00197876 Jy ! Clean residual min=-0.001290 max=0.001246 Jy/beam ! Clean residual mean=0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.560743 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 103 components and 0.560743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053647Jy sigma=0.827968 ! Fit after self-cal, rms=0.053638Jy sigma=0.827817 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.57302e-06 Jy ! Component: 100 - total flux cleaned = 7.6443e-05 Jy ! Component: 150 - total flux cleaned = 0.000186795 Jy ! Component: 200 - total flux cleaned = 0.000278783 Jy ! Total flux subtracted in 200 components = 0.000278783 Jy ! Clean residual min=-0.001235 max=0.001289 Jy/beam ! Clean residual mean=0.000001 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.561022 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 107 components and 0.561022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053618Jy sigma=0.827548 ! Fit after self-cal, rms=0.053609Jy sigma=0.827403 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8875 mas, bmaj=1.887 mas, bpa=-5.159 degrees ! Estimated noise=0.252558 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8875 x 1.887 at -5.159 degrees (North through East) ! Clean map min=-0.0012784 max=0.37272 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6937 mas, bmaj=1.558 mas, bpa=-6.472 degrees ! Estimated noise=0.474284 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.289121 Jy ! Component: 100 - total flux cleaned = 0.405985 Jy ! Component: 150 - total flux cleaned = 0.457706 Jy ! Component: 200 - total flux cleaned = 0.486917 Jy ! Total flux subtracted in 200 components = 0.486917 Jy ! Clean residual min=-0.005873 max=0.015170 Jy/beam ! Clean residual mean=0.000014 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 0.486917 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.486917 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8875 mas, bmaj=1.887 mas, bpa=-5.159 degrees ! Estimated noise=0.252558 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.026059 Jy ! Component: 100 - total flux cleaned = 0.0406129 Jy ! Component: 150 - total flux cleaned = 0.0495368 Jy ! Component: 200 - total flux cleaned = 0.0553766 Jy ! Total flux subtracted in 200 components = 0.0553766 Jy ! Clean residual min=-0.002158 max=0.003189 Jy/beam ! Clean residual mean=0.000004 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.542293 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 39 components and 0.542293 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041155 Jy ! Component: 100 - total flux cleaned = 0.00722766 Jy ! Component: 150 - total flux cleaned = 0.00964803 Jy ! Component: 200 - total flux cleaned = 0.011437 Jy ! Total flux subtracted in 200 components = 0.011437 Jy ! Clean residual min=-0.001565 max=0.001872 Jy/beam ! Clean residual mean=0.000002 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.55373 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 60 components and 0.55373 Jy ! Inverting map ! Added new window around map position (1, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155877 Jy ! Component: 100 - total flux cleaned = 0.00237099 Jy ! Component: 150 - total flux cleaned = 0.00294287 Jy ! Component: 200 - total flux cleaned = 0.00331762 Jy ! Total flux subtracted in 200 components = 0.00331762 Jy ! Clean residual min=-0.001539 max=0.001728 Jy/beam ! Clean residual mean=0.000001 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.557048 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 75 components and 0.557048 Jy ! Inverting map ! Added new window around map position (-4, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101596 Jy ! Component: 100 - total flux cleaned = 0.00157296 Jy ! Component: 150 - total flux cleaned = 0.00199675 Jy ! Component: 200 - total flux cleaned = 0.00235496 Jy ! Total flux subtracted in 200 components = 0.00235496 Jy ! Clean residual min=-0.001434 max=0.001572 Jy/beam ! Clean residual mean=0.000001 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.559403 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 86 components and 0.559403 Jy ! Inverting map ! Added new window around map position (-0.8, 5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130716 Jy ! Component: 100 - total flux cleaned = 0.00165511 Jy ! Component: 150 - total flux cleaned = 0.00186234 Jy ! Component: 200 - total flux cleaned = 0.00210089 Jy ! Total flux subtracted in 200 components = 0.00210089 Jy ! Clean residual min=-0.001445 max=0.001331 Jy/beam ! Clean residual mean=0.000001 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.561504 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 101 components and 0.561504 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.042 mas, bmaj=2.68 mas, bpa=-1.937 degrees ! Estimated noise=0.313942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000656431 Jy ! Component: 100 - total flux cleaned = 0.00108563 Jy ! Component: 150 - total flux cleaned = 0.00133001 Jy ! Component: 200 - total flux cleaned = 0.00157108 Jy ! Total flux subtracted in 200 components = 0.00157108 Jy ! Clean residual min=-0.001240 max=0.001144 Jy/beam ! Clean residual mean=0.000002 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.563075 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217349 Jy ! Component: 100 - total flux cleaned = 0.000414436 Jy ! Component: 150 - total flux cleaned = 0.000609503 Jy ! Component: 200 - total flux cleaned = 0.000760962 Jy ! Total flux subtracted in 200 components = 0.000760962 Jy ! Clean residual min=-0.001204 max=0.001121 Jy/beam ! Clean residual mean=0.000002 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.563836 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 135 components and 0.563836 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8875 mas, bmaj=1.887 mas, bpa=-5.159 degrees ! Estimated noise=0.252558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00036279 Jy ! Component: 100 - total flux cleaned = -0.000473339 Jy ! Component: 150 - total flux cleaned = -0.000366423 Jy ! Component: 200 - total flux cleaned = -0.000366473 Jy ! Total flux subtracted in 200 components = -0.000366473 Jy ! Clean residual min=-0.001472 max=0.001289 Jy/beam ! Clean residual mean=0.000001 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.563469 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 149 components and 0.563469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053480Jy sigma=0.825687 ! Fit after self-cal, rms=0.053333Jy sigma=0.824100 wmodel J0751+3313_X_map.mod ! Writing 149 model components to file: J0751+3313_X_map.mod wobs J0751+3313_X_uvs.fits ! Writing UV FITS file: J0751+3313_X_uvs.fits wwins J0751+3313_X_map.win ! wwins: Wrote 7 windows to J0751+3313_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333302 Jy ! Component: 100 - total flux cleaned = 0.00035377 Jy ! Component: 150 - total flux cleaned = 0.000412653 Jy ! Component: 200 - total flux cleaned = 0.000355987 Jy ! Component: 250 - total flux cleaned = 0.000282479 Jy ! Component: 300 - total flux cleaned = 0.00019241 Jy ! Component: 350 - total flux cleaned = 1.6145e-05 Jy ! Component: 400 - total flux cleaned = -0.000122087 Jy ! Component: 450 - total flux cleaned = -0.000257985 Jy ! Component: 500 - total flux cleaned = -0.000391465 Jy ! Component: 550 - total flux cleaned = -0.000473601 Jy ! Component: 600 - total flux cleaned = -0.000618924 Jy ! Component: 650 - total flux cleaned = -0.00069847 Jy ! Component: 700 - total flux cleaned = -0.000792888 Jy ! Component: 750 - total flux cleaned = -0.000932061 Jy ! Component: 800 - total flux cleaned = -0.00100852 Jy ! Component: 850 - total flux cleaned = -0.00111417 Jy ! Component: 900 - total flux cleaned = -0.00124822 Jy ! Component: 950 - total flux cleaned = -0.00140949 Jy ! Component: 1000 - total flux cleaned = -0.00149653 Jy ! Component: 1050 - total flux cleaned = -0.0016258 Jy ! Component: 1100 - total flux cleaned = -0.00173944 Jy ! Component: 1150 - total flux cleaned = -0.00189373 Jy ! Component: 1200 - total flux cleaned = -0.00196322 Jy ! Component: 1250 - total flux cleaned = -0.00205937 Jy ! Component: 1300 - total flux cleaned = -0.00212721 Jy ! Component: 1350 - total flux cleaned = -0.00216746 Jy ! Component: 1400 - total flux cleaned = -0.00226079 Jy ! Component: 1450 - total flux cleaned = -0.00235309 Jy ! Component: 1500 - total flux cleaned = -0.00236599 Jy ! Component: 1550 - total flux cleaned = -0.00244353 Jy ! Component: 1600 - total flux cleaned = -0.00250769 Jy ! Component: 1650 - total flux cleaned = -0.00252026 Jy ! Component: 1700 - total flux cleaned = -0.00258328 Jy ! Component: 1750 - total flux cleaned = -0.00258341 Jy ! Component: 1800 - total flux cleaned = -0.00268244 Jy ! Component: 1850 - total flux cleaned = -0.00268256 Jy ! Component: 1900 - total flux cleaned = -0.00278008 Jy ! Component: 1950 - total flux cleaned = -0.00279217 Jy ! Component: 2000 - total flux cleaned = -0.00286409 Jy ! Component: 2050 - total flux cleaned = -0.00291171 Jy ! Component: 2100 - total flux cleaned = -0.00294709 Jy ! Component: 2150 - total flux cleaned = -0.00300574 Jy ! Component: 2200 - total flux cleaned = -0.00302896 Jy ! Component: 2250 - total flux cleaned = -0.00309837 Jy ! Component: 2300 - total flux cleaned = -0.00314431 Jy ! Component: 2350 - total flux cleaned = -0.0031784 Jy ! Component: 2400 - total flux cleaned = -0.00318985 Jy ! Component: 2450 - total flux cleaned = -0.00323469 Jy ! Component: 2500 - total flux cleaned = -0.00325696 Jy ! Component: 2550 - total flux cleaned = -0.00331252 Jy ! Component: 2600 - total flux cleaned = -0.00330143 Jy ! Component: 2650 - total flux cleaned = -0.00337824 Jy ! Component: 2700 - total flux cleaned = -0.00337829 Jy ! Component: 2750 - total flux cleaned = -0.00341081 Jy ! Component: 2800 - total flux cleaned = -0.00345387 Jy ! Component: 2850 - total flux cleaned = -0.00348612 Jy ! Component: 2900 - total flux cleaned = -0.00347542 Jy ! Component: 2950 - total flux cleaned = -0.00348606 Jy ! Component: 3000 - total flux cleaned = -0.0035177 Jy ! Component: 3050 - total flux cleaned = -0.00358053 Jy ! Component: 3100 - total flux cleaned = -0.00357007 Jy ! Component: 3150 - total flux cleaned = -0.00358048 Jy ! Component: 3200 - total flux cleaned = -0.00368359 Jy ! Component: 3250 - total flux cleaned = -0.00368352 Jy ! Component: 3300 - total flux cleaned = -0.00374458 Jy ! Component: 3350 - total flux cleaned = -0.00372428 Jy ! Component: 3400 - total flux cleaned = -0.00373435 Jy ! Component: 3450 - total flux cleaned = -0.00375437 Jy ! Component: 3500 - total flux cleaned = -0.00379427 Jy ! Component: 3550 - total flux cleaned = -0.00380418 Jy ! Component: 3600 - total flux cleaned = -0.00385354 Jy ! Component: 3650 - total flux cleaned = -0.00380434 Jy ! Component: 3700 - total flux cleaned = -0.00381414 Jy ! Component: 3750 - total flux cleaned = -0.00384335 Jy ! Component: 3800 - total flux cleaned = -0.00385303 Jy ! Component: 3850 - total flux cleaned = -0.00391074 Jy ! Component: 3900 - total flux cleaned = -0.00389154 Jy ! Component: 3950 - total flux cleaned = -0.00390116 Jy ! Component: 4000 - total flux cleaned = -0.00389169 Jy ! Component: 4050 - total flux cleaned = -0.00392946 Jy ! Total flux subtracted in 4096 components = -0.00392942 Jy ! Clean residual min=-0.000497 max=0.000518 Jy/beam ! Clean residual mean=0.000000 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.55954 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 450 components and 0.55954 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0751+3313_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8875 x 1.887 at -5.159 degrees (North through East) ! Clean map min=-0.0011261 max=0.37163 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0751+3313_X_map.fits wmodel /vlbi/bp222/temp_maps//J0751+3313_X_map.mod ! Writing 450 model components to file: /vlbi/bp222/temp_maps//J0751+3313_X_map.mod wobs /vlbi/bp222/temp_maps//J0751+3313_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0751+3313_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0751+3313_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/temp_maps//J0751+3313_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.37163 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000155909 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.125858 0.125858 0.251716 0.503433 1.00687 2.01373 4.02746 8.05493 16.1099 32.2197 64.4394 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.371 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2383.63 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0751+3313_X_dfm.log closed on Thu Feb 14 22:39:32 2019