! Started logfile: /vlbi/bp222/temp_maps//J0730-3208_X_dfm.log on Thu Feb 14 22:37:32 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0730-3208_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0730-3208_X_uvm.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! AN table 2: 24 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.886401 visibilities/baseline/integration-bin. ! Found source: J0730-3208 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 51312 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0730-3208_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 63 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 63 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 63 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 63 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 63 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 63 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 63 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 63 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 63 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.010609Jy sigma=13.337257 ! Fit after self-cal, rms=0.905032Jy sigma=11.674549 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6437 mas, bmaj=1.68 mas, bpa=-2.44 degrees ! Estimated noise=0.594627 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.062499 Jy ! Component: 100 - total flux cleaned = 0.0919708 Jy ! Total flux subtracted in 100 components = 0.0919708 Jy ! Clean residual min=-0.008994 max=0.023553 Jy/beam ! Clean residual mean=0.000050 rms=0.002227 Jy/beam ! Combined flux in latest and established models = 0.0919708 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0919708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107583Jy sigma=1.373959 ! Fit after self-cal, rms=0.106946Jy sigma=1.366679 ! Inverting map ! Added new window around map position (1.2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247908 Jy ! Component: 100 - total flux cleaned = 0.0418438 Jy ! Total flux subtracted in 100 components = 0.0418438 Jy ! Clean residual min=-0.007192 max=0.023947 Jy/beam ! Clean residual mean=0.000036 rms=0.001724 Jy/beam ! Combined flux in latest and established models = 0.133815 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 42 components and 0.133815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095455Jy sigma=1.145599 ! Fit after self-cal, rms=0.093832Jy sigma=1.125318 ! Inverting map ! Added new window around map position (1.8, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196312 Jy ! Component: 100 - total flux cleaned = 0.0315032 Jy ! Total flux subtracted in 100 components = 0.0315032 Jy ! Clean residual min=-0.006191 max=0.016446 Jy/beam ! Clean residual mean=0.000025 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 0.165318 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.165318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086735Jy sigma=0.991285 ! Fit after self-cal, rms=0.085027Jy sigma=0.970591 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139629 Jy ! Component: 100 - total flux cleaned = 0.0224466 Jy ! Total flux subtracted in 100 components = 0.0224466 Jy ! Clean residual min=-0.004747 max=0.011685 Jy/beam ! Clean residual mean=0.000018 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.187764 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.187764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081204Jy sigma=0.896487 ! Fit after self-cal, rms=0.080241Jy sigma=0.885101 ! Inverting map ! Added new window around map position (-1, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107302 Jy ! Component: 100 - total flux cleaned = 0.0182021 Jy ! Total flux subtracted in 100 components = 0.0182021 Jy ! Clean residual min=-0.003520 max=0.005183 Jy/beam ! Clean residual mean=0.000012 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.205966 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 69 components and 0.205966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078012Jy sigma=0.841899 ! Fit after self-cal, rms=0.077863Jy sigma=0.841025 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00638971 Jy ! Component: 100 - total flux cleaned = 0.0110679 Jy ! Total flux subtracted in 100 components = 0.0110679 Jy ! Clean residual min=-0.003043 max=0.004071 Jy/beam ! Clean residual mean=0.000009 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.217034 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 77 components and 0.217034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077089Jy sigma=0.825336 ! Fit after self-cal, rms=0.077019Jy sigma=0.825040 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8892 mas, bmaj=2.254 mas, bpa=-1.246 degrees ! Estimated noise=0.251288 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00567611 Jy ! Component: 100 - total flux cleaned = 0.00890033 Jy ! Component: 150 - total flux cleaned = 0.0103472 Jy ! Component: 200 - total flux cleaned = 0.0107962 Jy ! Total flux subtracted in 200 components = 0.0107962 Jy ! Clean residual min=-0.002736 max=0.002748 Jy/beam ! Clean residual mean=0.000011 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.227831 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 0.227831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076610Jy sigma=0.817289 ! Fit after self-cal, rms=0.076522Jy sigma=0.816752 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8892 x 2.254 at -1.246 degrees (North through East) ! Clean map min=-0.0026379 max=0.06896 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.04 KP 1.01 ! LA 1.00 MK 1.00 NL 1.21 OV 0.91 ! PT 1.00 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.95 KP 0.96 LA 0.91 ! NL 0.96 OV 0.95 SC 0.76 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.05 KP 1.02 ! LA 1.01 MK 1.00 NL 1.19 OV 0.91 ! PT 1.01 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.93 KP 0.95 LA 0.94 ! NL 0.99 OV 0.93 SC 0.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.10 KP 1.03 ! LA 0.99 MK 0.99 NL 1.15 OV 0.92 ! PT 1.02 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.94 KP 0.94 LA 0.92 ! NL 0.98 OV 0.93 SC 0.81 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.09 KP 1.03 ! LA 1.00 MK 0.95 NL 1.18 OV 0.92 ! PT 1.01 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.93 KP 0.93 LA 0.94 ! NL 0.97 OV 0.93 SC 0.85 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 0.95 KP 1.03 ! LA 1.01 MK 1.10 NL 1.18 OV 0.93 ! PT 1.03 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.93 KP 0.94 LA 0.94 ! NL 0.98 OV 0.95 SC 0.86 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.10 KP 1.02 ! LA 1.00 MK 0.94 NL 1.13 OV 0.92 ! PT 1.04 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 0.94 KP 0.93 LA 0.96 ! NL 0.92 OV 0.95 SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.10 KP 1.03 ! LA 1.00 MK 0.99 NL 1.18 OV 0.92 ! PT 1.03 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 KP 0.92 LA 0.94 ! NL 0.94 OV 1.01 SC 0.87 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 0.95 KP 1.03 ! LA 1.02 MK 1.03 NL 1.18 OV 0.93 ! PT 1.03 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.96 KP 0.96 LA 0.90 ! NL 0.97 OV 0.98 SC 0.79 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.97 KP 1.03 ! LA 1.00 MK 0.97 NL 1.15 OV 0.95 ! PT 1.04 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.96 KP 0.93 LA 0.94 ! NL 0.97 OV 1.02 SC 0.67 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 1.06 KP 1.04 ! LA 1.00 MK 0.97 NL 1.18 OV 0.91 ! PT 1.05 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.94 KP 0.93 LA 0.94 ! NL 1.07 OV 0.99 SC 0.76 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.05 KP 1.02 ! LA 1.01 MK 0.86 NL 1.16 OV 0.94 ! PT 1.03 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.95 KP 0.95 LA 0.94 ! NL 0.97 OV 0.95 SC 0.85 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.09 KP 1.02 ! LA 1.03 MK 0.94 NL 1.20 OV 0.93 ! PT 1.04 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.94 KP 0.92 LA 0.95 ! NL 0.96 OV 0.96 SC 0.75 ! ! ! Fit before self-cal, rms=0.076522Jy sigma=0.816752 ! Fit after self-cal, rms=0.078807Jy sigma=0.804895 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8827 mas, bmaj=2.206 mas, bpa=-0.4873 degrees ! Estimated noise=0.253614 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.4, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00036687 Jy ! Component: 100 - total flux cleaned = 5.71476e-06 Jy ! Component: 150 - total flux cleaned = -0.00035709 Jy ! Component: 200 - total flux cleaned = -0.000562492 Jy ! Total flux subtracted in 200 components = -0.000562492 Jy ! Clean residual min=-0.001791 max=0.001356 Jy/beam ! Clean residual mean=0.000003 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.227268 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 101 components and 0.227268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078676Jy sigma=0.803356 ! Fit after self-cal, rms=0.078766Jy sigma=0.802931 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078766Jy sigma=0.802931 ! Fit after self-cal, rms=0.080277Jy sigma=0.801291 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8835 mas, bmaj=2.196 mas, bpa=-0.4456 degrees ! Estimated noise=0.253432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.94802e-05 Jy ! Component: 100 - total flux cleaned = -0.000186585 Jy ! Component: 150 - total flux cleaned = -0.000321747 Jy ! Component: 200 - total flux cleaned = -0.000403385 Jy ! Total flux subtracted in 200 components = -0.000403385 Jy ! Clean residual min=-0.001721 max=0.001267 Jy/beam ! Clean residual mean=0.000002 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.226865 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 108 components and 0.226865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080196Jy sigma=0.800468 ! Fit after self-cal, rms=0.080202Jy sigma=0.800273 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.12176e-06 Jy ! Component: 100 - total flux cleaned = -3.746e-05 Jy ! Component: 150 - total flux cleaned = -0.000110972 Jy ! Component: 200 - total flux cleaned = -0.00024417 Jy ! Total flux subtracted in 200 components = -0.00024417 Jy ! Clean residual min=-0.001732 max=0.001211 Jy/beam ! Clean residual mean=0.000002 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.226621 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 112 components and 0.226621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080148Jy sigma=0.799759 ! Fit after self-cal, rms=0.080118Jy sigma=0.799613 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080118Jy sigma=0.799613 ! Fit after self-cal, rms=0.081574Jy sigma=0.797972 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8821 mas, bmaj=2.176 mas, bpa=-0.6592 degrees ! Estimated noise=0.252024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109569 Jy ! Component: 100 - total flux cleaned = 6.99656e-05 Jy ! Component: 150 - total flux cleaned = 3.71501e-05 Jy ! Component: 200 - total flux cleaned = 7.34028e-06 Jy ! Total flux subtracted in 200 components = 7.34028e-06 Jy ! Clean residual min=-0.001607 max=0.001252 Jy/beam ! Clean residual mean=-0.000000 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.226628 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 118 components and 0.226628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081531Jy sigma=0.797538 ! Fit after self-cal, rms=0.081553Jy sigma=0.797392 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.13715e-06 Jy ! Component: 100 - total flux cleaned = -5.10766e-06 Jy ! Component: 150 - total flux cleaned = -6.10748e-05 Jy ! Component: 200 - total flux cleaned = -8.66942e-05 Jy ! Total flux subtracted in 200 components = -8.66942e-05 Jy ! Clean residual min=-0.001556 max=0.001202 Jy/beam ! Clean residual mean=-0.000000 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.226541 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 121 components and 0.226541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081524Jy sigma=0.797094 ! Fit after self-cal, rms=0.081509Jy sigma=0.796996 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081509Jy sigma=0.796996 ! Fit after self-cal, rms=0.081900Jy sigma=0.796961 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=6.286 mas, bpa=1.161 degrees ! Estimated noise=0.30178 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.05799e-05 Jy ! Component: 100 - total flux cleaned = -5.06335e-05 Jy ! Component: 150 - total flux cleaned = -8.56516e-05 Jy ! Component: 200 - total flux cleaned = -0.00011933 Jy ! Total flux subtracted in 200 components = -0.00011933 Jy ! Clean residual min=-0.001202 max=0.001039 Jy/beam ! Clean residual mean=-0.000001 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.226422 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 130 components and 0.226422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081885Jy sigma=0.796884 ! Fit after self-cal, rms=0.081885Jy sigma=0.796786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.13047e-05 Jy ! Component: 100 - total flux cleaned = -6.24884e-05 Jy ! Component: 150 - total flux cleaned = -7.7655e-05 Jy ! Component: 200 - total flux cleaned = -0.000120479 Jy ! Total flux subtracted in 200 components = -0.000120479 Jy ! Clean residual min=-0.001171 max=0.001033 Jy/beam ! Clean residual mean=-0.000001 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.226301 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 137 components and 0.226301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081877Jy sigma=0.796773 ! Fit after self-cal, rms=0.081875Jy sigma=0.796707 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8812 mas, bmaj=2.172 mas, bpa=-0.6134 degrees ! Estimated noise=0.251579 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8812 x 2.172 at -0.6134 degrees (North through East) ! Clean map min=-0.0019919 max=0.066835 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6389 mas, bmaj=1.622 mas, bpa=-1.814 degrees ! Estimated noise=0.585684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0646158 Jy ! Component: 100 - total flux cleaned = 0.102366 Jy ! Component: 150 - total flux cleaned = 0.128624 Jy ! Component: 200 - total flux cleaned = 0.148077 Jy ! Total flux subtracted in 200 components = 0.148077 Jy ! Clean residual min=-0.005259 max=0.012201 Jy/beam ! Clean residual mean=0.000028 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.148077 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.148077 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8812 mas, bmaj=2.172 mas, bpa=-0.6134 degrees ! Estimated noise=0.251579 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0299882 Jy ! Component: 100 - total flux cleaned = 0.047313 Jy ! Component: 150 - total flux cleaned = 0.0581149 Jy ! Component: 200 - total flux cleaned = 0.0651029 Jy ! Total flux subtracted in 200 components = 0.0651029 Jy ! Clean residual min=-0.002034 max=0.003904 Jy/beam ! Clean residual mean=0.000007 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.21318 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 99 components and 0.21318 Jy ! Inverting map ! Added new window around map position (2.4, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00470009 Jy ! Component: 100 - total flux cleaned = 0.00793356 Jy ! Component: 150 - total flux cleaned = 0.00936597 Jy ! Component: 200 - total flux cleaned = 0.0103294 Jy ! Total flux subtracted in 200 components = 0.0103294 Jy ! Clean residual min=-0.001559 max=0.001780 Jy/beam ! Clean residual mean=0.000002 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.223509 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 124 components and 0.223509 Jy ! Inverting map ! Added new window around map position (-1.8, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141825 Jy ! Component: 100 - total flux cleaned = 0.00185684 Jy ! Component: 150 - total flux cleaned = 0.00200507 Jy ! Component: 200 - total flux cleaned = 0.00214033 Jy ! Total flux subtracted in 200 components = 0.00214033 Jy ! Clean residual min=-0.001396 max=0.001070 Jy/beam ! Clean residual mean=0.000001 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.225649 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 141 components and 0.225649 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=6.286 mas, bpa=1.161 degrees ! Estimated noise=0.30178 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000675549 Jy ! Component: 100 - total flux cleaned = 0.000648929 Jy ! Component: 150 - total flux cleaned = 0.000574678 Jy ! Component: 200 - total flux cleaned = 0.00052921 Jy ! Total flux subtracted in 200 components = 0.00052921 Jy ! Clean residual min=-0.001099 max=0.000959 Jy/beam ! Clean residual mean=0.000001 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.226179 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.31273e-05 Jy ! Component: 100 - total flux cleaned = -0.000103381 Jy ! Component: 150 - total flux cleaned = -0.000158933 Jy ! Component: 200 - total flux cleaned = -0.000195128 Jy ! Total flux subtracted in 200 components = -0.000195128 Jy ! Clean residual min=-0.001070 max=0.000977 Jy/beam ! Clean residual mean=0.000001 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.225983 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 161 components and 0.225984 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8812 mas, bmaj=2.172 mas, bpa=-0.6134 degrees ! Estimated noise=0.251579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211213 Jy ! Component: 100 - total flux cleaned = -0.000172849 Jy ! Component: 150 - total flux cleaned = -0.000174337 Jy ! Component: 200 - total flux cleaned = -0.000207199 Jy ! Total flux subtracted in 200 components = -0.000207199 Jy ! Clean residual min=-0.001187 max=0.001039 Jy/beam ! Clean residual mean=0.000000 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.225776 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 175 components and 0.225776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081823Jy sigma=0.796302 ! Fit after self-cal, rms=0.081736Jy sigma=0.795892 wmodel J0730-3208_X_map.mod ! Writing 175 model components to file: J0730-3208_X_map.mod wobs J0730-3208_X_uvs.fits ! Writing UV FITS file: J0730-3208_X_uvs.fits wwins J0730-3208_X_map.win ! wwins: Wrote 8 windows to J0730-3208_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000275885 Jy ! Component: 100 - total flux cleaned = -0.00038602 Jy ! Component: 150 - total flux cleaned = -0.000508053 Jy ! Component: 200 - total flux cleaned = -0.000711121 Jy ! Component: 250 - total flux cleaned = -0.00084312 Jy ! Component: 300 - total flux cleaned = -0.000988332 Jy ! Component: 350 - total flux cleaned = -0.00105164 Jy ! Component: 400 - total flux cleaned = -0.0010673 Jy ! Component: 450 - total flux cleaned = -0.00112832 Jy ! Component: 500 - total flux cleaned = -0.00109829 Jy ! Component: 550 - total flux cleaned = -0.00115787 Jy ! Component: 600 - total flux cleaned = -0.0011725 Jy ! Component: 650 - total flux cleaned = -0.00114359 Jy ! Component: 700 - total flux cleaned = -0.00120063 Jy ! Component: 750 - total flux cleaned = -0.00118618 Jy ! Component: 800 - total flux cleaned = -0.00118612 Jy ! Component: 850 - total flux cleaned = -0.00117228 Jy ! Component: 900 - total flux cleaned = -0.001186 Jy ! Component: 950 - total flux cleaned = -0.00118581 Jy ! Component: 1000 - total flux cleaned = -0.00117252 Jy ! Component: 1050 - total flux cleaned = -0.00122543 Jy ! Component: 1100 - total flux cleaned = -0.00127753 Jy ! Component: 1150 - total flux cleaned = -0.00131632 Jy ! Component: 1200 - total flux cleaned = -0.00138029 Jy ! Component: 1250 - total flux cleaned = -0.0013674 Jy ! Component: 1300 - total flux cleaned = -0.00141809 Jy ! Component: 1350 - total flux cleaned = -0.00145554 Jy ! Component: 1400 - total flux cleaned = -0.00150511 Jy ! Component: 1450 - total flux cleaned = -0.00154202 Jy ! Component: 1500 - total flux cleaned = -0.00156628 Jy ! Component: 1550 - total flux cleaned = -0.00161466 Jy ! Component: 1600 - total flux cleaned = -0.00168656 Jy ! Component: 1650 - total flux cleaned = -0.0016628 Jy ! Component: 1700 - total flux cleaned = -0.0016747 Jy ! Component: 1750 - total flux cleaned = -0.00170992 Jy ! Component: 1800 - total flux cleaned = -0.00175671 Jy ! Component: 1850 - total flux cleaned = -0.00175678 Jy ! Component: 1900 - total flux cleaned = -0.00183729 Jy ! Component: 1950 - total flux cleaned = -0.00186002 Jy ! Component: 2000 - total flux cleaned = -0.00189404 Jy ! Component: 2050 - total flux cleaned = -0.00188282 Jy ! Component: 2100 - total flux cleaned = -0.00198359 Jy ! Component: 2150 - total flux cleaned = -0.00200585 Jy ! Component: 2200 - total flux cleaned = -0.00200582 Jy ! Component: 2250 - total flux cleaned = -0.00209358 Jy ! Component: 2300 - total flux cleaned = -0.0021044 Jy ! Component: 2350 - total flux cleaned = -0.00211515 Jy ! Component: 2400 - total flux cleaned = -0.00213668 Jy ! Component: 2450 - total flux cleaned = -0.00216882 Jy ! Component: 2500 - total flux cleaned = -0.00222189 Jy ! Component: 2550 - total flux cleaned = -0.00222177 Jy ! Component: 2600 - total flux cleaned = -0.0021691 Jy ! Component: 2650 - total flux cleaned = -0.0022006 Jy ! Component: 2700 - total flux cleaned = -0.00226295 Jy ! Component: 2750 - total flux cleaned = -0.00223199 Jy ! Component: 2800 - total flux cleaned = -0.00228326 Jy ! Component: 2850 - total flux cleaned = -0.00229353 Jy ! Component: 2900 - total flux cleaned = -0.00229348 Jy ! Component: 2950 - total flux cleaned = -0.00232376 Jy ! Component: 3000 - total flux cleaned = -0.00232374 Jy ! Component: 3050 - total flux cleaned = -0.00233379 Jy ! Component: 3100 - total flux cleaned = -0.00238349 Jy ! Component: 3150 - total flux cleaned = -0.0024429 Jy ! Component: 3200 - total flux cleaned = -0.00240346 Jy ! Component: 3250 - total flux cleaned = -0.00238378 Jy ! Component: 3300 - total flux cleaned = -0.00240337 Jy ! Component: 3350 - total flux cleaned = -0.00240344 Jy ! Component: 3400 - total flux cleaned = -0.0023939 Jy ! Component: 3450 - total flux cleaned = -0.00241313 Jy ! Component: 3500 - total flux cleaned = -0.00240354 Jy ! Component: 3550 - total flux cleaned = -0.00241306 Jy ! Component: 3600 - total flux cleaned = -0.00240361 Jy ! Component: 3650 - total flux cleaned = -0.00238469 Jy ! Component: 3700 - total flux cleaned = -0.00239413 Jy ! Component: 3750 - total flux cleaned = -0.00238477 Jy ! Component: 3800 - total flux cleaned = -0.00238483 Jy ! Component: 3850 - total flux cleaned = -0.00238486 Jy ! Component: 3900 - total flux cleaned = -0.00238476 Jy ! Component: 3950 - total flux cleaned = -0.00235714 Jy ! Component: 4000 - total flux cleaned = -0.00231138 Jy ! Component: 4050 - total flux cleaned = -0.00233871 Jy ! Total flux subtracted in 4096 components = -0.00231146 Jy ! Clean residual min=-0.000663 max=0.000546 Jy/beam ! Clean residual mean=0.000001 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.223465 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 471 components and 0.223465 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0730-3208_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8812 x 2.172 at -0.6134 degrees (North through East) ! Clean map min=-0.0014613 max=0.068043 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0730-3208_X_map.fits wmodel /vlbi/bp222/temp_maps//J0730-3208_X_map.mod ! Writing 471 model components to file: /vlbi/bp222/temp_maps//J0730-3208_X_map.mod wobs /vlbi/bp222/temp_maps//J0730-3208_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0730-3208_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0730-3208_X_map.win ! wwins: Wrote 9 windows to /vlbi/bp222/temp_maps//J0730-3208_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0680429 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000161032 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.709988 0.709988 1.41998 2.83995 5.67991 11.3598 22.7196 45.4392 90.8785 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.068 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 422.542 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0730-3208_X_dfm.log closed on Thu Feb 14 22:37:40 2019