! Started logfile: /vlbi/bp222/temp_maps//J0701+6936_X_dfm.log on Thu Feb 14 22:36:38 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0701+6936_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0701+6936_X_uvm.fits ! AN table 1: 117 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977018 visibilities/baseline/integration-bin. ! Found source: J0701+6936 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 61728 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0701+6936_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.012513Jy sigma=16.011779 ! Fit after self-cal, rms=0.904071Jy sigma=14.174852 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6706 mas, bmaj=1.172 mas, bpa=8.721 degrees ! Estimated noise=0.408983 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0679584 Jy ! Component: 100 - total flux cleaned = 0.0867642 Jy ! Total flux subtracted in 100 components = 0.0867642 Jy ! Clean residual min=-0.007331 max=0.029069 Jy/beam ! Clean residual mean=0.000014 rms=0.001816 Jy/beam ! Combined flux in latest and established models = 0.0867642 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0867642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092907Jy sigma=1.379175 ! Fit after self-cal, rms=0.092269Jy sigma=1.372951 ! Inverting map ! Added new window around map position (1.6, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239298 Jy ! Component: 100 - total flux cleaned = 0.0352482 Jy ! Total flux subtracted in 100 components = 0.0352482 Jy ! Clean residual min=-0.005923 max=0.026278 Jy/beam ! Clean residual mean=0.000009 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 0.122012 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 18 components and 0.122012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083804Jy sigma=1.230139 ! Fit after self-cal, rms=0.080478Jy sigma=1.173847 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206299 Jy ! Component: 100 - total flux cleaned = 0.0309219 Jy ! Total flux subtracted in 100 components = 0.0309219 Jy ! Clean residual min=-0.005874 max=0.015099 Jy/beam ! Clean residual mean=0.000005 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.152934 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.152934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073491Jy sigma=1.055950 ! Fit after self-cal, rms=0.071048Jy sigma=1.021458 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010401 Jy ! Component: 100 - total flux cleaned = 0.015768 Jy ! Total flux subtracted in 100 components = 0.015768 Jy ! Clean residual min=-0.005123 max=0.009938 Jy/beam ! Clean residual mean=0.000003 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.168702 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.168702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067553Jy sigma=0.965243 ! Fit after self-cal, rms=0.066737Jy sigma=0.953187 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293665 Jy ! Component: 100 - total flux cleaned = 0.006901 Jy ! Total flux subtracted in 100 components = 0.006901 Jy ! Clean residual min=-0.004153 max=0.007979 Jy/beam ! Clean residual mean=0.000002 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.175603 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.175603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065118Jy sigma=0.927868 ! Fit after self-cal, rms=0.064830Jy sigma=0.923279 ! Inverting map ! Added new window around map position (-1, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453179 Jy ! Component: 100 - total flux cleaned = 0.00773939 Jy ! Total flux subtracted in 100 components = 0.00773939 Jy ! Clean residual min=-0.003707 max=0.004455 Jy/beam ! Clean residual mean=0.000002 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.183343 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 33 components and 0.183343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063584Jy sigma=0.902784 ! Fit after self-cal, rms=0.063483Jy sigma=0.901434 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8963 mas, bmaj=1.507 mas, bpa=9.652 degrees ! Estimated noise=0.188487 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00715279 Jy ! Component: 100 - total flux cleaned = 0.0114291 Jy ! Component: 150 - total flux cleaned = 0.01327 Jy ! Component: 200 - total flux cleaned = 0.0144481 Jy ! Total flux subtracted in 200 components = 0.0144481 Jy ! Clean residual min=-0.002312 max=0.004106 Jy/beam ! Clean residual mean=0.000001 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.197791 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.197791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062569Jy sigma=0.885365 ! Fit after self-cal, rms=0.062501Jy sigma=0.884377 ! Inverting map ! Added new window around map position (-2.2, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270156 Jy ! Component: 100 - total flux cleaned = 0.00392133 Jy ! Component: 150 - total flux cleaned = 0.0044788 Jy ! Component: 200 - total flux cleaned = 0.0046193 Jy ! Total flux subtracted in 200 components = 0.0046193 Jy ! Clean residual min=-0.002097 max=0.002503 Jy/beam ! Clean residual mean=-0.000002 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.20241 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 59 components and 0.20241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062181Jy sigma=0.879936 ! Fit after self-cal, rms=0.062161Jy sigma=0.879632 ! Inverting map ! Added new window around map position (5.4, -14.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188801 Jy ! Component: 100 - total flux cleaned = 0.00251089 Jy ! Component: 150 - total flux cleaned = 0.00276034 Jy ! Component: 200 - total flux cleaned = 0.00293164 Jy ! Total flux subtracted in 200 components = 0.00293164 Jy ! Clean residual min=-0.002173 max=0.002196 Jy/beam ! Clean residual mean=-0.000003 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.205342 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 66 components and 0.205342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062016Jy sigma=0.877285 ! Fit after self-cal, rms=0.062013Jy sigma=0.877162 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8963 x 1.507 at 9.652 degrees (North through East) ! Clean map min=-0.0020055 max=0.076108 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.88 KP 1.02 ! LA 1.00 MK 1.06 NL 1.07 OV 0.92 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.91 KP 1.01 ! LA 1.00 MK 1.10 NL 1.08 OV 0.93 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.90 KP 1.00 ! LA 1.00 MK 1.07 NL 1.07 OV 0.92 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.90 KP 1.02 ! LA 1.00 MK 1.08 NL 1.08 OV 0.93 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.93 KP 1.02 ! LA 1.02 MK 1.09 NL 1.08 OV 0.95 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.90 KP 1.02 ! LA 1.01 MK 1.07 NL 1.09 OV 0.93 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.90 KP 1.02 ! LA 1.01 MK 1.08 NL 1.09 OV 0.93 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.90 KP 1.02 ! LA 1.01 MK 1.09 NL 1.11 OV 0.93 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.92 KP 1.01 ! LA 1.01 MK 1.07 NL 1.08 OV 0.97 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.88 KP 1.05 ! LA 1.02 MK 1.13 NL 1.08 OV 0.93 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.89 KP 1.03 ! LA 1.00 MK 1.11 NL 1.07 OV 0.94 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.86 KP 1.03 ! LA 1.02 MK 1.07 NL 1.07 OV 0.94 ! PT 1.00 SC 0.96 ! ! ! Fit before self-cal, rms=0.062013Jy sigma=0.877162 ! Fit after self-cal, rms=0.060753Jy sigma=0.867709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9016 mas, bmaj=1.511 mas, bpa=9.439 degrees ! Estimated noise=0.187578 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000847745 Jy ! Component: 100 - total flux cleaned = 0.00125007 Jy ! Component: 150 - total flux cleaned = 0.00150811 Jy ! Component: 200 - total flux cleaned = 0.00154636 Jy ! Total flux subtracted in 200 components = 0.00154636 Jy ! Clean residual min=-0.001424 max=0.001350 Jy/beam ! Clean residual mean=-0.000002 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.206888 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 78 components and 0.206888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060661Jy sigma=0.866675 ! Fit after self-cal, rms=0.060701Jy sigma=0.866478 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060701Jy sigma=0.866478 ! Fit after self-cal, rms=0.062200Jy sigma=0.859337 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8991 mas, bmaj=1.503 mas, bpa=9.064 degrees ! Estimated noise=0.187431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000322692 Jy ! Component: 100 - total flux cleaned = -0.000322306 Jy ! Component: 150 - total flux cleaned = -0.000388706 Jy ! Component: 200 - total flux cleaned = -0.000419562 Jy ! Total flux subtracted in 200 components = -0.000419562 Jy ! Clean residual min=-0.001029 max=0.001130 Jy/beam ! Clean residual mean=0.000001 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.206469 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 0.206469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062164Jy sigma=0.858759 ! Fit after self-cal, rms=0.062196Jy sigma=0.858670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.4, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000951154 Jy ! Component: 100 - total flux cleaned = 0.00101379 Jy ! Component: 150 - total flux cleaned = 0.000986085 Jy ! Component: 200 - total flux cleaned = 0.000960386 Jy ! Total flux subtracted in 200 components = 0.000960386 Jy ! Clean residual min=-0.000933 max=0.000844 Jy/beam ! Clean residual mean=0.000001 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.207429 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 98 components and 0.207429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062162Jy sigma=0.858152 ! Fit after self-cal, rms=0.062161Jy sigma=0.858125 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062161Jy sigma=0.858125 ! Fit after self-cal, rms=0.062537Jy sigma=0.857556 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8983 mas, bmaj=1.501 mas, bpa=9.011 degrees ! Estimated noise=0.186891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139969 Jy ! Component: 100 - total flux cleaned = -0.000112357 Jy ! Component: 150 - total flux cleaned = -3.72297e-05 Jy ! Component: 200 - total flux cleaned = -3.70627e-05 Jy ! Total flux subtracted in 200 components = -3.70627e-05 Jy ! Clean residual min=-0.000838 max=0.000818 Jy/beam ! Clean residual mean=0.000001 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.207392 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 102 components and 0.207392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062517Jy sigma=0.857234 ! Fit after self-cal, rms=0.062522Jy sigma=0.857216 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.69676e-05 Jy ! Component: 100 - total flux cleaned = 6.8808e-05 Jy ! Component: 150 - total flux cleaned = 6.89881e-05 Jy ! Component: 200 - total flux cleaned = 8.98872e-05 Jy ! Total flux subtracted in 200 components = 8.98872e-05 Jy ! Clean residual min=-0.000806 max=0.000794 Jy/beam ! Clean residual mean=0.000001 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.207482 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 105 components and 0.207482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062509Jy sigma=0.857003 ! Fit after self-cal, rms=0.062509Jy sigma=0.856996 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062509Jy sigma=0.856996 ! Fit after self-cal, rms=0.062504Jy sigma=0.856974 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.179 mas, bmaj=2.677 mas, bpa=17.28 degrees ! Estimated noise=0.242895 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165326 Jy ! Component: 100 - total flux cleaned = -0.000106265 Jy ! Component: 150 - total flux cleaned = -0.000105418 Jy ! Component: 200 - total flux cleaned = -0.000116064 Jy ! Total flux subtracted in 200 components = -0.000116064 Jy ! Clean residual min=-0.000835 max=0.000884 Jy/beam ! Clean residual mean=0.000002 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.207366 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 119 components and 0.207366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062500Jy sigma=0.856926 ! Fit after self-cal, rms=0.062501Jy sigma=0.856915 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-26, -34.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319002 Jy ! Component: 100 - total flux cleaned = 0.000388962 Jy ! Component: 150 - total flux cleaned = 0.000496336 Jy ! Component: 200 - total flux cleaned = 0.000590852 Jy ! Total flux subtracted in 200 components = 0.000590852 Jy ! Clean residual min=-0.000783 max=0.000725 Jy/beam ! Clean residual mean=0.000003 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.207957 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 139 components and 0.207957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062494Jy sigma=0.856727 ! Fit after self-cal, rms=0.062493Jy sigma=0.856711 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8975 mas, bmaj=1.501 mas, bpa=8.904 degrees ! Estimated noise=0.186613 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8975 x 1.501 at 8.904 degrees (North through East) ! Clean map min=-0.00067405 max=0.075935 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6737 mas, bmaj=1.169 mas, bpa=8.146 degrees ! Estimated noise=0.404247 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0748269 Jy ! Component: 100 - total flux cleaned = 0.110313 Jy ! Component: 150 - total flux cleaned = 0.132023 Jy ! Component: 200 - total flux cleaned = 0.146782 Jy ! Total flux subtracted in 200 components = 0.146782 Jy ! Clean residual min=-0.003101 max=0.008379 Jy/beam ! Clean residual mean=0.000007 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.146782 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.146782 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8975 mas, bmaj=1.501 mas, bpa=8.904 degrees ! Estimated noise=0.186613 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184999 Jy ! Component: 100 - total flux cleaned = 0.0298131 Jy ! Component: 150 - total flux cleaned = 0.0374491 Jy ! Component: 200 - total flux cleaned = 0.0428386 Jy ! Total flux subtracted in 200 components = 0.0428386 Jy ! Clean residual min=-0.001233 max=0.003022 Jy/beam ! Clean residual mean=0.000011 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.189621 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 40 components and 0.189621 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387997 Jy ! Component: 100 - total flux cleaned = 0.00671936 Jy ! Component: 150 - total flux cleaned = 0.00881566 Jy ! Component: 200 - total flux cleaned = 0.0104407 Jy ! Total flux subtracted in 200 components = 0.0104407 Jy ! Clean residual min=-0.000834 max=0.001017 Jy/beam ! Clean residual mean=0.000005 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.200062 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 59 components and 0.200062 Jy ! Inverting map ! Added new window around map position (4, -12.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013408 Jy ! Component: 100 - total flux cleaned = 0.00246381 Jy ! Component: 150 - total flux cleaned = 0.00343111 Jy ! Component: 200 - total flux cleaned = 0.00418697 Jy ! Total flux subtracted in 200 components = 0.00418697 Jy ! Clean residual min=-0.000787 max=0.000730 Jy/beam ! Clean residual mean=0.000003 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.204249 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 81 components and 0.204249 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.179 mas, bmaj=2.677 mas, bpa=17.28 degrees ! Estimated noise=0.242895 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119273 Jy ! Component: 100 - total flux cleaned = 0.00174522 Jy ! Component: 150 - total flux cleaned = 0.0020773 Jy ! Component: 200 - total flux cleaned = 0.0023541 Jy ! Total flux subtracted in 200 components = 0.0023541 Jy ! Clean residual min=-0.000823 max=0.000714 Jy/beam ! Clean residual mean=0.000004 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.206603 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236722 Jy ! Component: 100 - total flux cleaned = 0.000444402 Jy ! Component: 150 - total flux cleaned = 0.000645265 Jy ! Component: 200 - total flux cleaned = 0.000801241 Jy ! Total flux subtracted in 200 components = 0.000801241 Jy ! Clean residual min=-0.000797 max=0.000742 Jy/beam ! Clean residual mean=0.000003 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.207404 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 159 components and 0.207404 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8975 mas, bmaj=1.501 mas, bpa=8.904 degrees ! Estimated noise=0.186613 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.62002e-06 Jy ! Component: 100 - total flux cleaned = 6.64176e-05 Jy ! Component: 150 - total flux cleaned = 0.000171428 Jy ! Component: 200 - total flux cleaned = 0.000210108 Jy ! Total flux subtracted in 200 components = 0.000210108 Jy ! Clean residual min=-0.000755 max=0.000677 Jy/beam ! Clean residual mean=0.000001 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.207614 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 185 components and 0.207614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062455Jy sigma=0.856258 ! Fit after self-cal, rms=0.062436Jy sigma=0.856100 wmodel J0701+6936_X_map.mod ! Writing 185 model components to file: J0701+6936_X_map.mod wobs J0701+6936_X_uvs.fits ! Writing UV FITS file: J0701+6936_X_uvs.fits wwins J0701+6936_X_map.win ! wwins: Wrote 8 windows to J0701+6936_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216798 Jy ! Component: 100 - total flux cleaned = -0.000291852 Jy ! Component: 150 - total flux cleaned = -0.000328283 Jy ! Component: 200 - total flux cleaned = -0.00031687 Jy ! Component: 250 - total flux cleaned = -0.000339916 Jy ! Component: 300 - total flux cleaned = -0.000351202 Jy ! Component: 350 - total flux cleaned = -0.000362191 Jy ! Component: 400 - total flux cleaned = -0.000373032 Jy ! Component: 450 - total flux cleaned = -0.000405119 Jy ! Component: 500 - total flux cleaned = -0.000457854 Jy ! Component: 550 - total flux cleaned = -0.000468172 Jy ! Component: 600 - total flux cleaned = -0.000519666 Jy ! Component: 650 - total flux cleaned = -0.00056022 Jy ! Component: 700 - total flux cleaned = -0.000600463 Jy ! Component: 750 - total flux cleaned = -0.000610488 Jy ! Component: 800 - total flux cleaned = -0.000689466 Jy ! Component: 850 - total flux cleaned = -0.000738219 Jy ! Component: 900 - total flux cleaned = -0.000718833 Jy ! Component: 950 - total flux cleaned = -0.000757478 Jy ! Component: 1000 - total flux cleaned = -0.000805307 Jy ! Component: 1050 - total flux cleaned = -0.00083373 Jy ! Component: 1100 - total flux cleaned = -0.000871262 Jy ! Component: 1150 - total flux cleaned = -0.000843241 Jy ! Component: 1200 - total flux cleaned = -0.000880325 Jy ! Component: 1250 - total flux cleaned = -0.000907764 Jy ! Component: 1300 - total flux cleaned = -0.000880429 Jy ! Component: 1350 - total flux cleaned = -0.000907591 Jy ! Component: 1400 - total flux cleaned = -0.000898616 Jy ! Component: 1450 - total flux cleaned = -0.000925381 Jy ! Component: 1500 - total flux cleaned = -0.000916545 Jy ! Component: 1550 - total flux cleaned = -0.000951861 Jy ! Component: 1600 - total flux cleaned = -0.000934387 Jy ! Component: 1650 - total flux cleaned = -0.000969233 Jy ! Component: 1700 - total flux cleaned = -0.000995167 Jy ! Component: 1750 - total flux cleaned = -0.0010123 Jy ! Component: 1800 - total flux cleaned = -0.00096964 Jy ! Component: 1850 - total flux cleaned = -0.00104617 Jy ! Component: 1900 - total flux cleaned = -0.0010377 Jy ! Component: 1950 - total flux cleaned = -0.00105441 Jy ! Component: 2000 - total flux cleaned = -0.00107944 Jy ! Component: 2050 - total flux cleaned = -0.00111276 Jy ! Component: 2100 - total flux cleaned = -0.00109616 Jy ! Component: 2150 - total flux cleaned = -0.00113733 Jy ! Component: 2200 - total flux cleaned = -0.00113734 Jy ! Component: 2250 - total flux cleaned = -0.00114553 Jy ! Component: 2300 - total flux cleaned = -0.0011698 Jy ! Component: 2350 - total flux cleaned = -0.00118597 Jy ! Component: 2400 - total flux cleaned = -0.00120207 Jy ! Component: 2450 - total flux cleaned = -0.00124205 Jy ! Component: 2500 - total flux cleaned = -0.00121018 Jy ! Component: 2550 - total flux cleaned = -0.00126564 Jy ! Component: 2600 - total flux cleaned = -0.00130512 Jy ! Component: 2650 - total flux cleaned = -0.0012815 Jy ! Component: 2700 - total flux cleaned = -0.0013128 Jy ! Component: 2750 - total flux cleaned = -0.00133609 Jy ! Component: 2800 - total flux cleaned = -0.00136709 Jy ! Component: 2850 - total flux cleaned = -0.00139796 Jy ! Component: 2900 - total flux cleaned = -0.00135958 Jy ! Component: 2950 - total flux cleaned = -0.00138252 Jy ! Component: 3000 - total flux cleaned = -0.00143587 Jy ! Component: 3050 - total flux cleaned = -0.00146622 Jy ! Component: 3100 - total flux cleaned = -0.00148135 Jy ! Component: 3150 - total flux cleaned = -0.00148138 Jy ! Component: 3200 - total flux cleaned = -0.00155636 Jy ! Component: 3250 - total flux cleaned = -0.0015862 Jy ! Component: 3300 - total flux cleaned = -0.00157874 Jy ! Component: 3350 - total flux cleaned = -0.00160092 Jy ! Component: 3400 - total flux cleaned = -0.00163049 Jy ! Component: 3450 - total flux cleaned = -0.00164521 Jy ! Component: 3500 - total flux cleaned = -0.00166719 Jy ! Component: 3550 - total flux cleaned = -0.00168181 Jy ! Component: 3600 - total flux cleaned = -0.00171086 Jy ! Component: 3650 - total flux cleaned = -0.0017399 Jy ! Component: 3700 - total flux cleaned = -0.00173269 Jy ! Component: 3750 - total flux cleaned = -0.00174706 Jy ! Component: 3800 - total flux cleaned = -0.00175421 Jy ! Component: 3850 - total flux cleaned = -0.00182556 Jy ! Component: 3900 - total flux cleaned = -0.00181139 Jy ! Component: 3950 - total flux cleaned = -0.00181139 Jy ! Component: 4000 - total flux cleaned = -0.00183264 Jy ! Component: 4050 - total flux cleaned = -0.00188192 Jy ! Total flux subtracted in 4096 components = -0.00186086 Jy ! Clean residual min=-0.000464 max=0.000385 Jy/beam ! Clean residual mean=0.000001 rms=0.000122 Jy/beam ! Combined flux in latest and established models = 0.205753 Jy keep ! Adding 345 model components to the UV plane model. ! The established model now contains 530 components and 0.205753 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0701+6936_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8975 x 1.501 at 8.904 degrees (North through East) ! Clean map min=-0.00061915 max=0.076373 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0701+6936_X_map.fits wmodel /vlbi/bp222/temp_maps//J0701+6936_X_map.mod ! Writing 530 model components to file: /vlbi/bp222/temp_maps//J0701+6936_X_map.mod wobs /vlbi/bp222/temp_maps//J0701+6936_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0701+6936_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0701+6936_X_map.win ! wwins: Wrote 9 windows to /vlbi/bp222/temp_maps//J0701+6936_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0763732 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000121682 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.477978 0.477978 0.955955 1.91191 3.82382 7.64764 15.2953 30.5906 61.1811 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.076 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 627.644 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0701+6936_X_dfm.log closed on Thu Feb 14 22:36:46 2019