! Started logfile: /vlbi/bp222/maps//J0650-1632_X_dfm.log on Mon Jan 14 16:31:36 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/maps//J0650-1632_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/maps//J0650-1632_X_uvm.fits ! AN table 1: 21 integrations on 45 of 45 possible baselines. ! AN table 2: 92 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.845498 visibilities/baseline/integration-bin. ! Found source: J0650-1632 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 35724 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0650-1632_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.003907Jy sigma=13.796230 ! Fit after self-cal, rms=0.925338Jy sigma=12.671737 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6624 mas, bmaj=2.113 mas, bpa=-14.46 degrees ! Estimated noise=0.535347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0494516 Jy ! Component: 100 - total flux cleaned = 0.0678194 Jy ! Total flux subtracted in 100 components = 0.0678194 Jy ! Clean residual min=-0.006815 max=0.018086 Jy/beam ! Clean residual mean=-0.000015 rms=0.001772 Jy/beam ! Combined flux in latest and established models = 0.0678195 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0678195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084309Jy sigma=1.095981 ! Fit after self-cal, rms=0.083428Jy sigma=1.086501 ! Inverting map ! Added new window around map position (-1.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172133 Jy ! Component: 100 - total flux cleaned = 0.0277621 Jy ! Total flux subtracted in 100 components = 0.0277621 Jy ! Clean residual min=-0.005083 max=0.015255 Jy/beam ! Clean residual mean=-0.000011 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.0955816 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 0.0955816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077079Jy sigma=0.986881 ! Fit after self-cal, rms=0.075642Jy sigma=0.967825 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014695 Jy ! Component: 100 - total flux cleaned = 0.0234227 Jy ! Total flux subtracted in 100 components = 0.0234227 Jy ! Clean residual min=-0.004496 max=0.008673 Jy/beam ! Clean residual mean=-0.000007 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.119004 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 42 components and 0.119004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070951Jy sigma=0.894166 ! Fit after self-cal, rms=0.069595Jy sigma=0.877939 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118357 Jy ! Component: 100 - total flux cleaned = 0.0187244 Jy ! Total flux subtracted in 100 components = 0.0187244 Jy ! Clean residual min=-0.003780 max=0.006803 Jy/beam ! Clean residual mean=-0.000003 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.137729 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 52 components and 0.137729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066542Jy sigma=0.830166 ! Fit after self-cal, rms=0.065860Jy sigma=0.822087 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789084 Jy ! Component: 100 - total flux cleaned = 0.0126144 Jy ! Total flux subtracted in 100 components = 0.0126144 Jy ! Clean residual min=-0.003054 max=0.005818 Jy/beam ! Clean residual mean=-0.000001 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.150343 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 0.150343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064489Jy sigma=0.800516 ! Fit after self-cal, rms=0.064249Jy sigma=0.797656 ! Inverting map ! Added new window around map position (1, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586006 Jy ! Component: 100 - total flux cleaned = 0.00875263 Jy ! Total flux subtracted in 100 components = 0.00875263 Jy ! Clean residual min=-0.002849 max=0.002960 Jy/beam ! Clean residual mean=0.000000 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.159096 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.159096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063612Jy sigma=0.787809 ! Fit after self-cal, rms=0.063545Jy sigma=0.787242 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.877 mas, bmaj=2.743 mas, bpa=-14.43 degrees ! Estimated noise=0.286788 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423921 Jy ! Component: 100 - total flux cleaned = 0.00591805 Jy ! Component: 150 - total flux cleaned = 0.00670092 Jy ! Component: 200 - total flux cleaned = 0.00733522 Jy ! Total flux subtracted in 200 components = 0.00733522 Jy ! Clean residual min=-0.002091 max=0.002204 Jy/beam ! Clean residual mean=0.000005 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.166431 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 77 components and 0.166431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063205Jy sigma=0.782251 ! Fit after self-cal, rms=0.063155Jy sigma=0.781756 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.877 x 2.743 at -14.43 degrees (North through East) ! Clean map min=-0.0021618 max=0.062182 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.04 KP 1.02 ! LA 0.98 MK 0.96 NL 0.96 OV 0.96 ! PT 0.97 SC 1.16 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.00 HN 1.03 LA 0.94 ! MK 1.02 NL 0.96 OV 1.00 PT 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 1.18 KP 1.02 ! LA 1.00 MK 1.11 NL 0.95 OV 0.94 ! PT 1.02 SC 1.10 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.95 HN 1.01 LA 0.97 ! MK 1.11 NL 0.99 OV 0.99 PT 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.14 KP 0.99 ! LA 0.94 MK 1.00 NL 1.06 OV 0.94 ! PT 0.98 SC 1.12 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.00 HN 1.03 LA 0.98 ! MK 1.02 NL 0.97 OV 0.99 PT 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.91 KP 1.00 ! LA 1.03 MK 1.06 NL 1.04 OV 0.96 ! PT 0.94 SC 1.24 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.99 HN 1.00 LA 0.96 ! MK 1.00 NL 0.98 OV 0.97 PT 1.08 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.09 KP 0.97 ! LA 1.00 MK 1.06 NL 1.01 OV 1.03 ! PT 0.97 SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.97 HN 1.02 LA 0.96 ! MK 1.07 NL 0.99 OV 1.02 PT 1.12 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.03 KP 1.00 ! LA 1.00 MK 1.05 NL 1.06 OV 0.96 ! PT 0.95 SC 1.11 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.00 HN 0.99 LA 0.97 ! MK 1.01 NL 0.95 OV 1.00 PT 1.09 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 1.12 KP 1.00 ! LA 1.05 MK 1.07 NL 1.02 OV 0.94 ! PT 0.97 SC 1.11 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.00 HN 1.00 LA 0.95 ! MK 1.01 NL 0.95 OV 0.98 PT 1.09 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 1.09 KP 1.04 ! LA 0.96 MK 1.25 NL 0.98 OV 1.03 ! PT 1.00 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.00 HN 1.03 LA 0.96 ! MK 1.06 NL 0.93 OV 1.00 PT 1.10 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.90 KP 0.99 ! LA 1.00 MK 0.99 NL 1.02 OV 0.99 ! PT 0.98 SC 1.07 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.98 HN 1.10 LA 0.98 ! MK 1.05 NL 0.91 OV 0.98 PT 1.11 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.06 KP 0.95 ! LA 1.00 MK 1.01 NL 0.99 OV 0.94 ! PT 1.03 SC 1.15 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.98 HN 1.06 LA 0.98 ! MK 0.96 NL 0.93 OV 1.01 PT 1.12 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 0.83 KP 1.00 ! LA 0.96 MK 0.94 NL 1.14 OV 1.05 ! PT 1.01 SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.00 HN 1.03 LA 0.98 ! MK 1.00 NL 0.94 OV 0.98 PT 1.10 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 0.91 KP 0.99 ! LA 0.95 MK 0.83 NL 1.01 OV 0.95 ! PT 0.98 SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.97 HN 1.02 LA 0.96 ! MK 1.04 NL 0.90 OV 0.98 PT 1.11 ! ! ! Fit before self-cal, rms=0.063155Jy sigma=0.781756 ! Fit after self-cal, rms=0.063283Jy sigma=0.775928 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8879 mas, bmaj=2.783 mas, bpa=-14.56 degrees ! Estimated noise=0.285849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185029 Jy ! Component: 100 - total flux cleaned = 0.000642568 Jy ! Component: 150 - total flux cleaned = 0.000686155 Jy ! Component: 200 - total flux cleaned = 0.000791692 Jy ! Total flux subtracted in 200 components = 0.000791692 Jy ! Clean residual min=-0.001309 max=0.001509 Jy/beam ! Clean residual mean=-0.000000 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.167223 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 0.167223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063192Jy sigma=0.774528 ! Fit after self-cal, rms=0.063231Jy sigma=0.774187 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063231Jy sigma=0.774187 ! Fit after self-cal, rms=0.062954Jy sigma=0.773445 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8893 mas, bmaj=2.788 mas, bpa=-14.57 degrees ! Estimated noise=0.284449 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159162 Jy ! Component: 100 - total flux cleaned = 9.86563e-06 Jy ! Component: 150 - total flux cleaned = 0.000155999 Jy ! Component: 200 - total flux cleaned = 0.000308512 Jy ! Total flux subtracted in 200 components = 0.000308512 Jy ! Clean residual min=-0.001195 max=0.001366 Jy/beam ! Clean residual mean=-0.000000 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.167531 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 0.167531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062917Jy sigma=0.772940 ! Fit after self-cal, rms=0.062915Jy sigma=0.772863 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.4, 5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100295 Jy ! Component: 100 - total flux cleaned = 0.00115673 Jy ! Component: 150 - total flux cleaned = 0.00126401 Jy ! Component: 200 - total flux cleaned = 0.00133731 Jy ! Total flux subtracted in 200 components = 0.00133731 Jy ! Clean residual min=-0.001208 max=0.001233 Jy/beam ! Clean residual mean=-0.000000 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.168868 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 101 components and 0.168868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062882Jy sigma=0.772400 ! Fit after self-cal, rms=0.062878Jy sigma=0.772353 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062878Jy sigma=0.772353 ! Fit after self-cal, rms=0.063026Jy sigma=0.770213 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8897 mas, bmaj=2.786 mas, bpa=-14.53 degrees ! Estimated noise=0.283735 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.45333e-05 Jy ! Component: 100 - total flux cleaned = 0.000129963 Jy ! Component: 150 - total flux cleaned = 0.000174672 Jy ! Component: 200 - total flux cleaned = 0.000216741 Jy ! Total flux subtracted in 200 components = 0.000216741 Jy ! Clean residual min=-0.001104 max=0.001160 Jy/beam ! Clean residual mean=-0.000000 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.169085 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 108 components and 0.169085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063008Jy sigma=0.769996 ! Fit after self-cal, rms=0.063022Jy sigma=0.769939 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.4, -22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107286 Jy ! Component: 100 - total flux cleaned = 0.00153359 Jy ! Component: 150 - total flux cleaned = 0.00182292 Jy ! Component: 200 - total flux cleaned = 0.00200713 Jy ! Total flux subtracted in 200 components = 0.00200713 Jy ! Clean residual min=-0.001111 max=0.001025 Jy/beam ! Clean residual mean=-0.000000 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.171092 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 125 components and 0.171092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062997Jy sigma=0.769617 ! Fit after self-cal, rms=0.062991Jy sigma=0.769587 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062991Jy sigma=0.769587 ! Fit after self-cal, rms=0.062889Jy sigma=0.769558 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.07 mas, bmaj=5.062 mas, bpa=-6.586 degrees ! Estimated noise=0.345229 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00071677 Jy ! Component: 100 - total flux cleaned = 0.00119032 Jy ! Component: 150 - total flux cleaned = 0.0014775 Jy ! Component: 200 - total flux cleaned = 0.00164714 Jy ! Total flux subtracted in 200 components = 0.00164714 Jy ! Clean residual min=-0.001372 max=0.001165 Jy/beam ! Clean residual mean=-0.000000 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.172739 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 137 components and 0.172739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062884Jy sigma=0.769493 ! Fit after self-cal, rms=0.062882Jy sigma=0.769478 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000325527 Jy ! Component: 100 - total flux cleaned = 0.000390274 Jy ! Component: 150 - total flux cleaned = 0.000437183 Jy ! Component: 200 - total flux cleaned = 0.000458985 Jy ! Total flux subtracted in 200 components = 0.000458985 Jy ! Clean residual min=-0.001356 max=0.001122 Jy/beam ! Clean residual mean=-0.000000 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.173198 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 141 components and 0.173198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062880Jy sigma=0.769449 ! Fit after self-cal, rms=0.062879Jy sigma=0.769445 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.889 mas, bmaj=2.78 mas, bpa=-14.49 degrees ! Estimated noise=0.283221 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.889 x 2.78 at -14.49 degrees (North through East) ! Clean map min=-0.001037 max=0.060298 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.671 mas, bmaj=2.145 mas, bpa=-14.61 degrees ! Estimated noise=0.532395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0520519 Jy ! Component: 100 - total flux cleaned = 0.0799868 Jy ! Component: 150 - total flux cleaned = 0.0992844 Jy ! Component: 200 - total flux cleaned = 0.113527 Jy ! Total flux subtracted in 200 components = 0.113527 Jy ! Clean residual min=-0.004547 max=0.008338 Jy/beam ! Clean residual mean=-0.000006 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.113527 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.113527 Jy ! Inverting map and beam ! Estimated beam: bmin=0.889 mas, bmaj=2.78 mas, bpa=-14.49 degrees ! Estimated noise=0.283221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189734 Jy ! Component: 100 - total flux cleaned = 0.0303803 Jy ! Component: 150 - total flux cleaned = 0.0377975 Jy ! Component: 200 - total flux cleaned = 0.0428151 Jy ! Total flux subtracted in 200 components = 0.0428151 Jy ! Clean residual min=-0.001834 max=0.002807 Jy/beam ! Clean residual mean=-0.000005 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.156342 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 65 components and 0.156342 Jy ! Inverting map ! Added new window around map position (-1, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353473 Jy ! Component: 100 - total flux cleaned = 0.0060659 Jy ! Component: 150 - total flux cleaned = 0.00795834 Jy ! Component: 200 - total flux cleaned = 0.00949358 Jy ! Total flux subtracted in 200 components = 0.00949358 Jy ! Clean residual min=-0.001212 max=0.001384 Jy/beam ! Clean residual mean=-0.000001 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.165835 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 92 components and 0.165835 Jy ! Inverting map ! Added new window around map position (3, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147351 Jy ! Component: 100 - total flux cleaned = 0.00235517 Jy ! Component: 150 - total flux cleaned = 0.00308768 Jy ! Component: 200 - total flux cleaned = 0.00367273 Jy ! Total flux subtracted in 200 components = 0.00367273 Jy ! Clean residual min=-0.001054 max=0.001044 Jy/beam ! Clean residual mean=-0.000000 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.169508 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 118 components and 0.169508 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.07 mas, bmaj=5.062 mas, bpa=-6.586 degrees ! Estimated noise=0.345229 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113832 Jy ! Component: 100 - total flux cleaned = 0.00195673 Jy ! Component: 150 - total flux cleaned = 0.0025176 Jy ! Component: 200 - total flux cleaned = 0.00290507 Jy ! Total flux subtracted in 200 components = 0.00290507 Jy ! Clean residual min=-0.001253 max=0.001121 Jy/beam ! Clean residual mean=0.000001 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.172413 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160958 Jy ! Component: 100 - total flux cleaned = 0.000234144 Jy ! Component: 150 - total flux cleaned = 0.000301502 Jy ! Component: 200 - total flux cleaned = 0.000394486 Jy ! Total flux subtracted in 200 components = 0.000394486 Jy ! Clean residual min=-0.001277 max=0.001090 Jy/beam ! Clean residual mean=0.000001 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.172808 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 158 components and 0.172808 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.889 mas, bmaj=2.78 mas, bpa=-14.49 degrees ! Estimated noise=0.283221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000393377 Jy ! Component: 100 - total flux cleaned = -0.000467247 Jy ! Component: 150 - total flux cleaned = -0.000446109 Jy ! Component: 200 - total flux cleaned = -0.000365321 Jy ! Total flux subtracted in 200 components = -0.000365321 Jy ! Clean residual min=-0.000960 max=0.000946 Jy/beam ! Clean residual mean=0.000000 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.172442 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 182 components and 0.172442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062832Jy sigma=0.769062 ! Fit after self-cal, rms=0.062827Jy sigma=0.768915 wmodel J0650-1632_X_map.mod ! Writing 182 model components to file: J0650-1632_X_map.mod wobs J0650-1632_X_uvs.fits ! Writing UV FITS file: J0650-1632_X_uvs.fits wwins J0650-1632_X_map.win ! wwins: Wrote 7 windows to J0650-1632_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129817 Jy ! Component: 100 - total flux cleaned = -0.000130862 Jy ! Component: 150 - total flux cleaned = 1.72586e-08 Jy ! Component: 200 - total flux cleaned = 0.000110593 Jy ! Component: 250 - total flux cleaned = 0.000186864 Jy ! Component: 300 - total flux cleaned = 0.00021645 Jy ! Component: 350 - total flux cleaned = 0.00026015 Jy ! Component: 400 - total flux cleaned = 0.000316928 Jy ! Component: 450 - total flux cleaned = 0.000413862 Jy ! Component: 500 - total flux cleaned = 0.000427567 Jy ! Component: 550 - total flux cleaned = 0.00046751 Jy ! Component: 600 - total flux cleaned = 0.000519895 Jy ! Component: 650 - total flux cleaned = 0.000558739 Jy ! Component: 700 - total flux cleaned = 0.000558863 Jy ! Component: 750 - total flux cleaned = 0.000621867 Jy ! Component: 800 - total flux cleaned = 0.000659171 Jy ! Component: 850 - total flux cleaned = 0.000708032 Jy ! Component: 900 - total flux cleaned = 0.000719945 Jy ! Component: 950 - total flux cleaned = 0.000708247 Jy ! Component: 1000 - total flux cleaned = 0.000743859 Jy ! Component: 1050 - total flux cleaned = 0.00080215 Jy ! Component: 1100 - total flux cleaned = 0.000848021 Jy ! Component: 1150 - total flux cleaned = 0.000848061 Jy ! Component: 1200 - total flux cleaned = 0.000881666 Jy ! Component: 1250 - total flux cleaned = 0.00088175 Jy ! Component: 1300 - total flux cleaned = 0.000914763 Jy ! Component: 1350 - total flux cleaned = 0.000871294 Jy ! Component: 1400 - total flux cleaned = 0.000914589 Jy ! Component: 1450 - total flux cleaned = 0.000957283 Jy ! Component: 1500 - total flux cleaned = 0.000914939 Jy ! Component: 1550 - total flux cleaned = 0.000904372 Jy ! Component: 1600 - total flux cleaned = 0.000925185 Jy ! Component: 1650 - total flux cleaned = 0.000966406 Jy ! Component: 1700 - total flux cleaned = 0.00095617 Jy ! Component: 1750 - total flux cleaned = 0.00094618 Jy ! Component: 1800 - total flux cleaned = 0.00100631 Jy ! Component: 1850 - total flux cleaned = 0.00100629 Jy ! Component: 1900 - total flux cleaned = 0.000976683 Jy ! Component: 1950 - total flux cleaned = 0.000986575 Jy ! Component: 2000 - total flux cleaned = 0.000976826 Jy ! Component: 2050 - total flux cleaned = 0.00103469 Jy ! Component: 2100 - total flux cleaned = 0.00102506 Jy ! Component: 2150 - total flux cleaned = 0.00109169 Jy ! Component: 2200 - total flux cleaned = 0.00112925 Jy ! Component: 2250 - total flux cleaned = 0.00113861 Jy ! Component: 2300 - total flux cleaned = 0.00112945 Jy ! Component: 2350 - total flux cleaned = 0.00119413 Jy ! Component: 2400 - total flux cleaned = 0.00122154 Jy ! Component: 2450 - total flux cleaned = 0.00124888 Jy ! Component: 2500 - total flux cleaned = 0.001267 Jy ! Component: 2550 - total flux cleaned = 0.00126692 Jy ! Component: 2600 - total flux cleaned = 0.00130266 Jy ! Component: 2650 - total flux cleaned = 0.00129381 Jy ! Component: 2700 - total flux cleaned = 0.00138213 Jy ! Component: 2750 - total flux cleaned = 0.0014084 Jy ! Component: 2800 - total flux cleaned = 0.00143457 Jy ! Component: 2850 - total flux cleaned = 0.00151274 Jy ! Component: 2900 - total flux cleaned = 0.00150406 Jy ! Component: 2950 - total flux cleaned = 0.00152973 Jy ! Component: 3000 - total flux cleaned = 0.0015383 Jy ! Component: 3050 - total flux cleaned = 0.00160619 Jy ! Component: 3100 - total flux cleaned = 0.00161444 Jy ! Component: 3150 - total flux cleaned = 0.00163962 Jy ! Component: 3200 - total flux cleaned = 0.00168127 Jy ! Component: 3250 - total flux cleaned = 0.00165646 Jy ! Component: 3300 - total flux cleaned = 0.00168951 Jy ! Component: 3350 - total flux cleaned = 0.00168948 Jy ! Component: 3400 - total flux cleaned = 0.00170588 Jy ! Component: 3450 - total flux cleaned = 0.00173831 Jy ! Component: 3500 - total flux cleaned = 0.00176247 Jy ! Component: 3550 - total flux cleaned = 0.00174639 Jy ! Component: 3600 - total flux cleaned = 0.00177037 Jy ! Component: 3650 - total flux cleaned = 0.00177833 Jy ! Component: 3700 - total flux cleaned = 0.00177047 Jy ! Component: 3750 - total flux cleaned = 0.00181775 Jy ! Component: 3800 - total flux cleaned = 0.00179424 Jy ! Component: 3850 - total flux cleaned = 0.00181758 Jy ! Component: 3900 - total flux cleaned = 0.00187183 Jy ! Component: 3950 - total flux cleaned = 0.00184862 Jy ! Component: 4000 - total flux cleaned = 0.00189469 Jy ! Component: 4050 - total flux cleaned = 0.00184889 Jy ! Total flux subtracted in 4096 components = 0.00186404 Jy ! Clean residual min=-0.000391 max=0.000617 Jy/beam ! Clean residual mean=-0.000000 rms=0.000136 Jy/beam ! Combined flux in latest and established models = 0.174306 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 495 components and 0.174306 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/maps//J0650-1632_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.889 x 2.78 at -14.49 degrees (North through East) ! Clean map min=-0.00067946 max=0.058838 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/maps//J0650-1632_X_map.fits wmodel /vlbi/bp222/maps//J0650-1632_X_map.mod ! Writing 495 model components to file: /vlbi/bp222/maps//J0650-1632_X_map.mod wobs /vlbi/bp222/maps//J0650-1632_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/maps//J0650-1632_X_uvs.fits wwins /vlbi/bp222/maps//J0650-1632_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/maps//J0650-1632_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.058838 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000135314 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.689929 0.689929 1.37986 2.75972 5.51943 11.0389 22.0777 44.1555 88.3109 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.058 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 434.827 quit ! Quitting program ! Log file /vlbi/bp222/maps//J0650-1632_X_dfm.log closed on Mon Jan 14 16:31:43 2019