! Started logfile: J0631+5311_S_dfm.log on Fri Feb 15 19:46:08 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J0631+5311_S_uvm.fits
! Reading UV FITS file: J0631+5311_S_uvm.fits
! AN table 1: 139 integrations on 45 of 45 possible baselines.
! AN table 2: 23 integrations on 28 of 28 possible baselines.
! AN table 3: 23 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.967775 visibilities/baseline/integration-bin.
! Found source: J0631+5311
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 29912 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0631+5311_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 1390 telescope corrections were flagged in sub-array 1.
!  A total of 184 telescope corrections were flagged in sub-array 2.
!  A total of 115 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.057168Jy  sigma=17.698743
! Fit after  self-cal, rms=0.768392Jy  sigma=12.473350
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.814 mas, bmaj=5.687 mas, bpa=2.626 degrees
! Estimated noise=0.499841 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.185626 Jy
! Component: 100  -  total flux cleaned = 0.277526 Jy
! Total flux subtracted in 100 components = 0.277526 Jy
! Clean residual min=-0.019794 max=0.088519 Jy/beam
! Clean residual mean=-0.000097 rms=0.005401 Jy/beam
! Combined flux in latest and established models = 0.277526 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.277526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.171969Jy  sigma=2.915301
! Fit after  self-cal, rms=0.170223Jy  sigma=2.894817
! Inverting map 
! Added new window around map position (-4, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.080493 Jy
! Component: 100  -  total flux cleaned = 0.119509 Jy
! Total flux subtracted in 100 components = 0.119509 Jy
! Clean residual min=-0.014131 max=0.049191 Jy/beam
! Clean residual mean=-0.000075 rms=0.003557 Jy/beam
! Combined flux in latest and established models = 0.397035 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 23 components and 0.397035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.124748Jy  sigma=2.062470
! Fit after  self-cal, rms=0.120138Jy  sigma=1.989656
! Inverting map 
! Added new window around map position (-11.5, 34).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0443147 Jy
! Component: 100  -  total flux cleaned = 0.067661 Jy
! Total flux subtracted in 100 components = 0.067661 Jy
! Clean residual min=-0.009469 max=0.030889 Jy/beam
! Clean residual mean=-0.000066 rms=0.002457 Jy/beam
! Combined flux in latest and established models = 0.464696 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 30 components and 0.464696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.101947Jy  sigma=1.646852
! Fit after  self-cal, rms=0.100732Jy  sigma=1.625052
! Inverting map 
! Added new window around map position (5, 4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0254525 Jy
! Component: 100  -  total flux cleaned = 0.0409803 Jy
! Total flux subtracted in 100 components = 0.0409803 Jy
! Clean residual min=-0.008706 max=0.008822 Jy/beam
! Clean residual mean=-0.000062 rms=0.001967 Jy/beam
! Combined flux in latest and established models = 0.505677 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 43 components and 0.505677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.093499Jy  sigma=1.485168
! Fit after  self-cal, rms=0.092932Jy  sigma=1.478037
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134173 Jy
! Component: 100  -  total flux cleaned = 0.0231362 Jy
! Total flux subtracted in 100 components = 0.0231362 Jy
! Clean residual min=-0.007925 max=0.007210 Jy/beam
! Clean residual mean=-0.000060 rms=0.001790 Jy/beam
! Combined flux in latest and established models = 0.528813 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 52 components and 0.528813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.090575Jy  sigma=1.429834
! Fit after  self-cal, rms=0.090367Jy  sigma=1.427183
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.555 mas, bmaj=6.434 mas, bpa=-1.716 degrees
! Estimated noise=0.294735 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116856 Jy
! Component: 100  -  total flux cleaned = 0.0191875 Jy
! Component: 150  -  total flux cleaned = 0.0242882 Jy
! Component: 200  -  total flux cleaned = 0.0260821 Jy
! Total flux subtracted in 200 components = 0.0260821 Jy
! Clean residual min=-0.008258 max=0.008348 Jy/beam
! Clean residual mean=-0.000100 rms=0.002199 Jy/beam
! Combined flux in latest and established models = 0.554895 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 81 components and 0.554895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.088765Jy  sigma=1.392125
! Fit after  self-cal, rms=0.088545Jy  sigma=1.388785
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.555 x 6.434 at -1.716 degrees (North through East)
! Clean map  min=-0.0080334  max=0.23579 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.95     KP        0.97     
!   LA        0.95     MK        0.96     NL        1.02     OV        0.96     
!   PT        1.07     SC        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        0.99     HN        0.92     KP        1.01     
!   MK        0.94     NL        0.92     OV        1.00     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     FD        1.01     HN        0.97     KP        1.01     
!   LA        0.94     MK        1.00     NL        1.02     OV        0.97     
!   PT        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.96     KP        0.96     
!   LA        0.95     MK        0.96     NL        1.03     OV        0.96     
!   PT        1.06     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        0.99     HN        0.97     KP        1.23     
!   MK        0.92     NL        0.87     OV        1.02     PT        0.97     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.03     FD        1.02     HN        0.98     KP        0.94     
!   LA        0.96     MK        1.00     NL        0.98     OV        0.98     
!   PT        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.99     KP        0.98     
!   LA        0.94     MK        0.97     NL        1.03     OV        0.96     
!   PT        1.07     SC        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.00     HN        0.95     KP        1.67     
!   MK        0.88     NL        1.00     OV        1.00     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.01     FD        1.01     HN        0.98     KP        0.95     
!   LA        0.91     MK        1.01     NL        0.94     OV        0.97     
!   PT        0.95     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.088545Jy  sigma=1.388785
! Fit after  self-cal, rms=0.086384Jy  sigma=1.328860
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.541 mas, bmaj=6.417 mas, bpa=-2.317 degrees
! Estimated noise=0.290058 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00189096 Jy
! Component: 100  -  total flux cleaned = -0.00175287 Jy
! Component: 150  -  total flux cleaned = -0.00163229 Jy
! Component: 200  -  total flux cleaned = -0.00153599 Jy
! Total flux subtracted in 200 components = -0.00153599 Jy
! Clean residual min=-0.006816 max=0.007325 Jy/beam
! Clean residual mean=-0.000063 rms=0.001915 Jy/beam
! Combined flux in latest and established models = 0.553359 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 88 components and 0.553359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.085954Jy  sigma=1.323174
! Fit after  self-cal, rms=0.085897Jy  sigma=1.322575
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.085897Jy  sigma=1.322575
! Fit after  self-cal, rms=0.082116Jy  sigma=1.190247
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.551 mas, bmaj=6.409 mas, bpa=-2.14 degrees
! Estimated noise=0.290526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000225768 Jy
! Component: 100  -  total flux cleaned = 0.000688272 Jy
! Component: 150  -  total flux cleaned = 0.0008675 Jy
! Component: 200  -  total flux cleaned = 0.00094462 Jy
! Total flux subtracted in 200 components = 0.00094462 Jy
! Clean residual min=-0.004991 max=0.006813 Jy/beam
! Clean residual mean=-0.000045 rms=0.001452 Jy/beam
! Combined flux in latest and established models = 0.554303 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 95 components and 0.554303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.081825Jy  sigma=1.185882
! Fit after  self-cal, rms=0.081831Jy  sigma=1.185229
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.5, 26).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00616133 Jy
! Component: 100  -  total flux cleaned = 0.00762023 Jy
! Component: 150  -  total flux cleaned = 0.00822356 Jy
! Component: 200  -  total flux cleaned = 0.00874818 Jy
! Total flux subtracted in 200 components = 0.00874818 Jy
! Clean residual min=-0.004605 max=0.005158 Jy/beam
! Clean residual mean=-0.000040 rms=0.001404 Jy/beam
! Combined flux in latest and established models = 0.563052 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 115 components and 0.563052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.081292Jy  sigma=1.177218
! Fit after  self-cal, rms=0.081251Jy  sigma=1.176620
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.081251Jy  sigma=1.176620
! Fit after  self-cal, rms=0.098028Jy  sigma=0.984783
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.537 mas, bmaj=6.41 mas, bpa=-1.858 degrees
! Estimated noise=0.288659 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136748 Jy
! Component: 100  -  total flux cleaned = 0.00199228 Jy
! Component: 150  -  total flux cleaned = 0.00248317 Jy
! Component: 200  -  total flux cleaned = 0.00266658 Jy
! Total flux subtracted in 200 components = 0.00266658 Jy
! Clean residual min=-0.001579 max=0.003217 Jy/beam
! Clean residual mean=-0.000008 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.565718 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 132 components and 0.565718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097883Jy  sigma=0.981157
! Fit after  self-cal, rms=0.098037Jy  sigma=0.980663
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7, 14).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00234659 Jy
! Component: 100  -  total flux cleaned = 0.00254708 Jy
! Component: 150  -  total flux cleaned = 0.00271538 Jy
! Component: 200  -  total flux cleaned = 0.00287041 Jy
! Total flux subtracted in 200 components = 0.00287041 Jy
! Clean residual min=-0.001552 max=0.001675 Jy/beam
! Clean residual mean=-0.000007 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.568589 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 156 components and 0.568589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097945Jy  sigma=0.977666
! Fit after  self-cal, rms=0.097928Jy  sigma=0.977390
! Inverting map 
! Added new window around map position (-25.5, 67).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119715 Jy
! Component: 100  -  total flux cleaned = 0.00129839 Jy
! Component: 150  -  total flux cleaned = 0.00130052 Jy
! Component: 200  -  total flux cleaned = 0.00134519 Jy
! Total flux subtracted in 200 components = 0.00134519 Jy
! Clean residual min=-0.001448 max=0.001646 Jy/beam
! Clean residual mean=-0.000007 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.569934 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 172 components and 0.569934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097871Jy  sigma=0.976119
! Fit after  self-cal, rms=0.097864Jy  sigma=0.976054
! Inverting map 
! Added new window around map position (50, -119).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010645 Jy
! Component: 100  -  total flux cleaned = 0.00124179 Jy
! Component: 150  -  total flux cleaned = 0.00128331 Jy
! Component: 200  -  total flux cleaned = 0.00128314 Jy
! Total flux subtracted in 200 components = 0.00128314 Jy
! Clean residual min=-0.001427 max=0.001425 Jy/beam
! Clean residual mean=-0.000007 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.571217 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 183 components and 0.571217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097813Jy  sigma=0.975105
! Fit after  self-cal, rms=0.097809Jy  sigma=0.975063
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097809Jy  sigma=0.975063
! Fit after  self-cal, rms=0.097930Jy  sigma=0.974275
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.709 mas, bmaj=9.672 mas, bpa=-0.05333 degrees
! Estimated noise=0.349521 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000325834 Jy
! Component: 100  -  total flux cleaned = 0.000453759 Jy
! Component: 150  -  total flux cleaned = 0.000563415 Jy
! Component: 200  -  total flux cleaned = 0.000596719 Jy
! Total flux subtracted in 200 components = 0.000596719 Jy
! Clean residual min=-0.001288 max=0.001504 Jy/beam
! Clean residual mean=-0.000014 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.571813 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 215 components and 0.571813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097895Jy  sigma=0.973825
! Fit after  self-cal, rms=0.097885Jy  sigma=0.973770
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000225286 Jy
! Component: 100  -  total flux cleaned = 0.000281152 Jy
! Component: 150  -  total flux cleaned = 0.000305968 Jy
! Component: 200  -  total flux cleaned = 0.000282681 Jy
! Total flux subtracted in 200 components = 0.000282681 Jy
! Clean residual min=-0.001299 max=0.001489 Jy/beam
! Clean residual mean=-0.000014 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.572096 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 235 components and 0.572096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097869Jy  sigma=0.973585
! Fit after  self-cal, rms=0.097866Jy  sigma=0.973568
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.538 mas, bmaj=6.414 mas, bpa=-1.743 degrees
! Estimated noise=0.28793 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.538 x 6.414 at -1.743 degrees (North through East)
! Clean map  min=-0.0012195  max=0.23101 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.807 mas, bmaj=5.706 mas, bpa=2.665 degrees
! Estimated noise=0.489544 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.191307 Jy
! Component: 100  -  total flux cleaned = 0.291217 Jy
! Component: 150  -  total flux cleaned = 0.355665 Jy
! Component: 200  -  total flux cleaned = 0.401452 Jy
! Total flux subtracted in 200 components = 0.401452 Jy
! Clean residual min=-0.007636 max=0.025675 Jy/beam
! Clean residual mean=-0.000037 rms=0.002398 Jy/beam
! Combined flux in latest and established models = 0.401452 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.401452 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.538 mas, bmaj=6.414 mas, bpa=-1.743 degrees
! Estimated noise=0.28793 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0441786 Jy
! Component: 100  -  total flux cleaned = 0.0733572 Jy
! Component: 150  -  total flux cleaned = 0.093855 Jy
! Component: 200  -  total flux cleaned = 0.108799 Jy
! Total flux subtracted in 200 components = 0.108799 Jy
! Clean residual min=-0.003980 max=0.008570 Jy/beam
! Clean residual mean=-0.000034 rms=0.001174 Jy/beam
! Combined flux in latest and established models = 0.510251 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 59 components and 0.510251 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114343 Jy
! Component: 100  -  total flux cleaned = 0.0205738 Jy
! Component: 150  -  total flux cleaned = 0.0279729 Jy
! Component: 200  -  total flux cleaned = 0.0340071 Jy
! Total flux subtracted in 200 components = 0.0340071 Jy
! Clean residual min=-0.002135 max=0.003648 Jy/beam
! Clean residual mean=-0.000019 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.544258 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 93 components and 0.544258 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00495325 Jy
! Component: 100  -  total flux cleaned = 0.00903807 Jy
! Component: 150  -  total flux cleaned = 0.012426 Jy
! Component: 200  -  total flux cleaned = 0.0152706 Jy
! Total flux subtracted in 200 components = 0.0152706 Jy
! Clean residual min=-0.001564 max=0.001740 Jy/beam
! Clean residual mean=-0.000013 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.559529 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 121 components and 0.559529 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.709 mas, bmaj=9.672 mas, bpa=-0.05333 degrees
! Estimated noise=0.349521 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00351497 Jy
! Component: 100  -  total flux cleaned = 0.0059713 Jy
! Component: 150  -  total flux cleaned = 0.00781069 Jy
! Component: 200  -  total flux cleaned = 0.0084567 Jy
! Total flux subtracted in 200 components = 0.0084567 Jy
! Clean residual min=-0.001581 max=0.001637 Jy/beam
! Clean residual mean=-0.000019 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.567985 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000522628 Jy
! Component: 100  -  total flux cleaned = 0.00104932 Jy
! Component: 150  -  total flux cleaned = 0.00143445 Jy
! Component: 200  -  total flux cleaned = 0.001787 Jy
! Total flux subtracted in 200 components = 0.001787 Jy
! Clean residual min=-0.001371 max=0.001489 Jy/beam
! Clean residual mean=-0.000017 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.569772 Jy
! Adding 100 model components to the UV plane model.
! The established model now contains 201 components and 0.569773 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.538 mas, bmaj=6.414 mas, bpa=-1.743 degrees
! Estimated noise=0.28793 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000330471 Jy
! Component: 100  -  total flux cleaned = 0.00059834 Jy
! Component: 150  -  total flux cleaned = 0.000788892 Jy
! Component: 200  -  total flux cleaned = 0.00100735 Jy
! Total flux subtracted in 200 components = 0.00100735 Jy
! Clean residual min=-0.001324 max=0.001235 Jy/beam
! Clean residual mean=-0.000008 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.57078 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 227 components and 0.57078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.097744Jy  sigma=0.971745
! Fit after  self-cal, rms=0.097721Jy  sigma=0.971208
wmodel J0631+5311_S_map.mod
! Writing 227 model components to file: J0631+5311_S_map.mod
wobs   J0631+5311_S_uvs.fits
! Writing UV FITS file: J0631+5311_S_uvs.fits
wwins  J0631+5311_S_map.win
! wwins: Wrote 8 windows to J0631+5311_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000185752 Jy
! Component: 100  -  total flux cleaned = -0.000313386 Jy
! Component: 150  -  total flux cleaned = -0.000353966 Jy
! Component: 200  -  total flux cleaned = -0.000432864 Jy
! Component: 250  -  total flux cleaned = -0.000548245 Jy
! Component: 300  -  total flux cleaned = -0.000623911 Jy
! Component: 350  -  total flux cleaned = -0.000752995 Jy
! Component: 400  -  total flux cleaned = -0.00086156 Jy
! Component: 450  -  total flux cleaned = -0.0010041 Jy
! Component: 500  -  total flux cleaned = -0.00110939 Jy
! Component: 550  -  total flux cleaned = -0.00126476 Jy
! Component: 600  -  total flux cleaned = -0.00134976 Jy
! Component: 650  -  total flux cleaned = -0.00143397 Jy
! Component: 700  -  total flux cleaned = -0.00155026 Jy
! Component: 750  -  total flux cleaned = -0.00161561 Jy
! Component: 800  -  total flux cleaned = -0.00168045 Jy
! Component: 850  -  total flux cleaned = -0.00172842 Jy
! Component: 900  -  total flux cleaned = -0.00183937 Jy
! Component: 950  -  total flux cleaned = -0.00185507 Jy
! Component: 1000  -  total flux cleaned = -0.00196402 Jy
! Component: 1050  -  total flux cleaned = -0.00204117 Jy
! Component: 1100  -  total flux cleaned = -0.00213289 Jy
! Component: 1150  -  total flux cleaned = -0.00225386 Jy
! Component: 1200  -  total flux cleaned = -0.0023288 Jy
! Component: 1250  -  total flux cleaned = -0.00243306 Jy
! Component: 1300  -  total flux cleaned = -0.00246273 Jy
! Component: 1350  -  total flux cleaned = -0.00256535 Jy
! Component: 1400  -  total flux cleaned = -0.00266706 Jy
! Component: 1450  -  total flux cleaned = -0.002768 Jy
! Component: 1500  -  total flux cleaned = -0.00283935 Jy
! Component: 1550  -  total flux cleaned = -0.00285364 Jy
! Component: 1600  -  total flux cleaned = -0.00296657 Jy
! Component: 1650  -  total flux cleaned = -0.00300863 Jy
! Component: 1700  -  total flux cleaned = -0.00314769 Jy
! Component: 1750  -  total flux cleaned = -0.00320282 Jy
! Component: 1800  -  total flux cleaned = -0.00325759 Jy
! Component: 1850  -  total flux cleaned = -0.00333938 Jy
! Component: 1900  -  total flux cleaned = -0.00339338 Jy
! Component: 1950  -  total flux cleaned = -0.00339336 Jy
! Component: 2000  -  total flux cleaned = -0.00351384 Jy
! Component: 2050  -  total flux cleaned = -0.00351387 Jy
! Component: 2100  -  total flux cleaned = -0.00358002 Jy
! Component: 2150  -  total flux cleaned = -0.00360636 Jy
! Component: 2200  -  total flux cleaned = -0.00364557 Jy
! Component: 2250  -  total flux cleaned = -0.00372344 Jy
! Component: 2300  -  total flux cleaned = -0.00378792 Jy
! Component: 2350  -  total flux cleaned = -0.00380085 Jy
! Component: 2400  -  total flux cleaned = -0.00381365 Jy
! Component: 2450  -  total flux cleaned = -0.00388981 Jy
! Component: 2500  -  total flux cleaned = -0.00388972 Jy
! Component: 2550  -  total flux cleaned = -0.00393986 Jy
! Component: 2600  -  total flux cleaned = -0.00395236 Jy
! Component: 2650  -  total flux cleaned = -0.00398961 Jy
! Component: 2700  -  total flux cleaned = -0.00398959 Jy
! Component: 2750  -  total flux cleaned = -0.00402637 Jy
! Component: 2800  -  total flux cleaned = -0.00407517 Jy
! Component: 2850  -  total flux cleaned = -0.00409945 Jy
! Component: 2900  -  total flux cleaned = -0.0041476 Jy
! Component: 2950  -  total flux cleaned = -0.00412358 Jy
! Component: 3000  -  total flux cleaned = -0.00409974 Jy
! Component: 3050  -  total flux cleaned = -0.00412359 Jy
! Component: 3100  -  total flux cleaned = -0.00415903 Jy
! Component: 3150  -  total flux cleaned = -0.00417086 Jy
! Component: 3200  -  total flux cleaned = -0.00424112 Jy
! Component: 3250  -  total flux cleaned = -0.0042295 Jy
! Component: 3300  -  total flux cleaned = -0.00432231 Jy
! Component: 3350  -  total flux cleaned = -0.00436846 Jy
! Component: 3400  -  total flux cleaned = -0.00440287 Jy
! Component: 3450  -  total flux cleaned = -0.00439142 Jy
! Component: 3500  -  total flux cleaned = -0.00445967 Jy
! Component: 3550  -  total flux cleaned = -0.00450509 Jy
! Component: 3600  -  total flux cleaned = -0.00450508 Jy
! Component: 3650  -  total flux cleaned = -0.00450497 Jy
! Component: 3700  -  total flux cleaned = -0.00451622 Jy
! Component: 3750  -  total flux cleaned = -0.00457185 Jy
! Component: 3800  -  total flux cleaned = -0.00467179 Jy
! Component: 3850  -  total flux cleaned = -0.00468273 Jy
! Component: 3900  -  total flux cleaned = -0.00473775 Jy
! Component: 3950  -  total flux cleaned = -0.00472681 Jy
! Component: 4000  -  total flux cleaned = -0.00477042 Jy
! Component: 4050  -  total flux cleaned = -0.00480298 Jy
! Total flux subtracted in 4096 components = -0.00483542 Jy
! Clean residual min=-0.000626 max=0.000778 Jy/beam
! Clean residual mean=-0.000003 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.565944 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 529 components and 0.565944 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J0631+5311_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.538 x 6.414 at -1.743 degrees (North through East)
! Clean map  min=-0.0010364  max=0.23098 Jy/beam
! Writing clean map to FITS file: J0631+5311_S_map.fits
wmodel J0631+5311_S_map.mod
! Writing 529 model components to file: J0631+5311_S_map.mod
wobs   J0631+5311_S_uvs.fits
! Writing UV FITS file: J0631+5311_S_uvs.fits
wwins  J0631+5311_S_map.win
! wwins: Wrote 9 windows to J0631+5311_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.230976 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000208906 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.271335 0.271335 0.54267 1.08534 2.17068 4.34136 8.68273 17.3655 34.7309 69.4618
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.23 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1105.64 
quit
! Quitting program
! Log file J0631+5311_S_dfm.log closed on Fri Feb 15 19:46:14 2019