! Started logfile: /vlbi/bp222/maps//J0607+6720_X_dfm.log on Mon Jan 14 16:30:07 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/bp222/maps//J0607+6720_X_uva.fits
! Reading UV FITS file: /vlbi/bp222/maps//J0607+6720_X_uva.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.954167 visibilities/baseline/integration-bin.
! Found source: J0607+6720
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 8244 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0607+6720_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.052839Jy  sigma=15.501624
! Fit after  self-cal, rms=0.725700Jy  sigma=10.510658
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6318 mas, bmaj=2.627 mas, bpa=-33.24 degrees
! Estimated noise=1.1289 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.197177 Jy
! Component: 100  -  total flux cleaned = 0.263569 Jy
! Total flux subtracted in 100 components = 0.263569 Jy
! Clean residual min=-0.016105 max=0.032883 Jy/beam
! Clean residual mean=-0.000015 rms=0.004562 Jy/beam
! Combined flux in latest and established models = 0.263569 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.263569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.103461Jy  sigma=1.535342
! Fit after  self-cal, rms=0.103058Jy  sigma=1.527642
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0406584 Jy
! Component: 100  -  total flux cleaned = 0.0665861 Jy
! Total flux subtracted in 100 components = 0.0665861 Jy
! Clean residual min=-0.008497 max=0.014315 Jy/beam
! Clean residual mean=-0.000008 rms=0.002454 Jy/beam
! Combined flux in latest and established models = 0.330155 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 0.330155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073291Jy  sigma=1.051123
! Fit after  self-cal, rms=0.072953Jy  sigma=1.046044
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0193902 Jy
! Component: 100  -  total flux cleaned = 0.0327172 Jy
! Total flux subtracted in 100 components = 0.0327172 Jy
! Clean residual min=-0.005850 max=0.007364 Jy/beam
! Clean residual mean=-0.000005 rms=0.001572 Jy/beam
! Combined flux in latest and established models = 0.362873 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 17 components and 0.362873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063287Jy  sigma=0.886933
! Fit after  self-cal, rms=0.063183Jy  sigma=0.885193
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8593 mas, bmaj=2.641 mas, bpa=-33.81 degrees
! Estimated noise=0.556012 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0171676 Jy
! Component: 100  -  total flux cleaned = 0.0265738 Jy
! Component: 150  -  total flux cleaned = 0.0327461 Jy
! Component: 200  -  total flux cleaned = 0.0373322 Jy
! Total flux subtracted in 200 components = 0.0373322 Jy
! Clean residual min=-0.003554 max=0.004072 Jy/beam
! Clean residual mean=-0.000002 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.400205 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 46 components and 0.400205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058495Jy  sigma=0.806054
! Fit after  self-cal, rms=0.058410Jy  sigma=0.804661
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8593 x 2.641 at -33.81 degrees (North through East)
! Clean map  min=-0.0032964  max=0.28621 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.00     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.02     OV        1.00     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.98     KP        0.99     
!   LA        1.00     MK        1.01     NL        1.00     OV        1.02     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        0.98     
!   LA        0.99     MK        0.99     NL        1.01     OV        1.02     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.00     OV        1.02     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.96     KP        0.99     
!   LA        0.98     MK        1.01     NL        1.02     OV        1.00     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.95     KP        0.98     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.98     KP        0.98     
!   LA        1.01     MK        0.96     NL        1.00     OV        1.00     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.96     KP        0.99     
!   LA        1.00     MK        1.01     NL        1.00     OV        1.00     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.96     KP        0.98     
!   LA        1.00     MK        0.97     NL        1.01     OV        1.02     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.98     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.99     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.04     KP        0.99     
!   LA        0.97     MK        0.97     NL        1.02     OV        0.99     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.92     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.00     OV        1.01     
!   PT        0.98     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.058410Jy  sigma=0.804661
! Fit after  self-cal, rms=0.057285Jy  sigma=0.794466
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8608 mas, bmaj=2.637 mas, bpa=-33.94 degrees
! Estimated noise=0.550789 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187477 Jy
! Component: 100  -  total flux cleaned = 0.00203599 Jy
! Component: 150  -  total flux cleaned = 0.00220479 Jy
! Component: 200  -  total flux cleaned = 0.00233769 Jy
! Total flux subtracted in 200 components = 0.00233769 Jy
! Clean residual min=-0.002117 max=0.002502 Jy/beam
! Clean residual mean=-0.000000 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.402542 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 58 components and 0.402542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057205Jy  sigma=0.792832
! Fit after  self-cal, rms=0.057205Jy  sigma=0.792731
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057205Jy  sigma=0.792731
! Fit after  self-cal, rms=0.057120Jy  sigma=0.792527
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8603 mas, bmaj=2.633 mas, bpa=-33.97 degrees
! Estimated noise=0.550561 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000852741 Jy
! Component: 100  -  total flux cleaned = 0.0010275 Jy
! Component: 150  -  total flux cleaned = 0.00117247 Jy
! Component: 200  -  total flux cleaned = 0.00132109 Jy
! Total flux subtracted in 200 components = 0.00132109 Jy
! Clean residual min=-0.002017 max=0.002436 Jy/beam
! Clean residual mean=-0.000000 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.403864 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 66 components and 0.403864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057087Jy  sigma=0.791881
! Fit after  self-cal, rms=0.057087Jy  sigma=0.791839
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (34.4, 14).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020924 Jy
! Component: 100  -  total flux cleaned = 0.00252476 Jy
! Component: 150  -  total flux cleaned = 0.00265105 Jy
! Component: 200  -  total flux cleaned = 0.00273627 Jy
! Total flux subtracted in 200 components = 0.00273627 Jy
! Clean residual min=-0.001806 max=0.001922 Jy/beam
! Clean residual mean=0.000000 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.4066 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 86 components and 0.4066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057012Jy  sigma=0.790445
! Fit after  self-cal, rms=0.057010Jy  sigma=0.790389
! Inverting map 
! Added new window around map position (-51.2, -15.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000880463 Jy
! Component: 100  -  total flux cleaned = 0.000668287 Jy
! Component: 150  -  total flux cleaned = 0.000638848 Jy
! Component: 200  -  total flux cleaned = 0.00061418 Jy
! Total flux subtracted in 200 components = 0.00061418 Jy
! Clean residual min=-0.001721 max=0.001827 Jy/beam
! Clean residual mean=0.000000 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.407214 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 102 components and 0.407214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056957Jy  sigma=0.789586
! Fit after  self-cal, rms=0.056954Jy  sigma=0.789554
! Inverting map 
! Added new window around map position (-36.6, 11.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149129 Jy
! Component: 100  -  total flux cleaned = 0.00210438 Jy
! Component: 150  -  total flux cleaned = 0.00242816 Jy
! Component: 200  -  total flux cleaned = 0.00256082 Jy
! Total flux subtracted in 200 components = 0.00256082 Jy
! Clean residual min=-0.001671 max=0.001453 Jy/beam
! Clean residual mean=-0.000000 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.409775 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 117 components and 0.409775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056901Jy  sigma=0.788844
! Fit after  self-cal, rms=0.056900Jy  sigma=0.788825
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056900Jy  sigma=0.788825
! Fit after  self-cal, rms=0.056847Jy  sigma=0.788635
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8599 mas, bmaj=2.631 mas, bpa=-33.98 degrees
! Estimated noise=0.550062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000505246 Jy
! Component: 100  -  total flux cleaned = 0.000633864 Jy
! Component: 150  -  total flux cleaned = 0.000753051 Jy
! Component: 200  -  total flux cleaned = 0.000843049 Jy
! Total flux subtracted in 200 components = 0.000843049 Jy
! Clean residual min=-0.001616 max=0.001487 Jy/beam
! Clean residual mean=-0.000000 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.410618 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 129 components and 0.410618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056827Jy  sigma=0.788356
! Fit after  self-cal, rms=0.056827Jy  sigma=0.788352
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111054 Jy
! Component: 100  -  total flux cleaned = 0.000237853 Jy
! Component: 150  -  total flux cleaned = 0.000319345 Jy
! Component: 200  -  total flux cleaned = 0.000398199 Jy
! Total flux subtracted in 200 components = 0.000398199 Jy
! Clean residual min=-0.001579 max=0.001526 Jy/beam
! Clean residual mean=-0.000000 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.411016 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 139 components and 0.411016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056813Jy  sigma=0.788174
! Fit after  self-cal, rms=0.056813Jy  sigma=0.788171
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056813Jy  sigma=0.788171
! Fit after  self-cal, rms=0.056816Jy  sigma=0.788154
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.065 mas, bmaj=2.93 mas, bpa=-40.71 degrees
! Estimated noise=0.682817 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000361274 Jy
! Component: 100  -  total flux cleaned = 0.000477255 Jy
! Component: 150  -  total flux cleaned = 0.000647835 Jy
! Component: 200  -  total flux cleaned = 0.000781381 Jy
! Total flux subtracted in 200 components = 0.000781381 Jy
! Clean residual min=-0.001626 max=0.001332 Jy/beam
! Clean residual mean=-0.000000 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.411797 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 153 components and 0.411797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056811Jy  sigma=0.788090
! Fit after  self-cal, rms=0.056812Jy  sigma=0.788081
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144602 Jy
! Component: 100  -  total flux cleaned = 0.000230301 Jy
! Component: 150  -  total flux cleaned = 0.000309812 Jy
! Component: 200  -  total flux cleaned = 0.000341994 Jy
! Total flux subtracted in 200 components = 0.000341994 Jy
! Clean residual min=-0.001569 max=0.001369 Jy/beam
! Clean residual mean=-0.000000 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.412139 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 169 components and 0.412139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056809Jy  sigma=0.788042
! Fit after  self-cal, rms=0.056810Jy  sigma=0.788039
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8597 mas, bmaj=2.631 mas, bpa=-33.98 degrees
! Estimated noise=0.550153 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8597 x 2.631 at -33.98 degrees (North through East)
! Clean map  min=-0.0014039  max=0.28446 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6319 mas, bmaj=2.612 mas, bpa=-33.39 degrees
! Estimated noise=1.11776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.195554 Jy
! Component: 100  -  total flux cleaned = 0.263601 Jy
! Component: 150  -  total flux cleaned = 0.303472 Jy
! Component: 200  -  total flux cleaned = 0.33029 Jy
! Total flux subtracted in 200 components = 0.33029 Jy
! Clean residual min=-0.007825 max=0.014717 Jy/beam
! Clean residual mean=-0.000008 rms=0.002308 Jy/beam
! Combined flux in latest and established models = 0.33029 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.33029 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8597 mas, bmaj=2.631 mas, bpa=-33.98 degrees
! Estimated noise=0.550153 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0306938 Jy
! Component: 100  -  total flux cleaned = 0.0468571 Jy
! Component: 150  -  total flux cleaned = 0.0560225 Jy
! Component: 200  -  total flux cleaned = 0.0618702 Jy
! Total flux subtracted in 200 components = 0.0618702 Jy
! Clean residual min=-0.002654 max=0.004160 Jy/beam
! Clean residual mean=-0.000002 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.39216 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 39 components and 0.39216 Jy
! Inverting map 
! Added new window around map position (36.2, 18.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0044024 Jy
! Component: 100  -  total flux cleaned = 0.00747846 Jy
! Component: 150  -  total flux cleaned = 0.00983854 Jy
! Component: 200  -  total flux cleaned = 0.0117576 Jy
! Total flux subtracted in 200 components = 0.0117576 Jy
! Clean residual min=-0.002094 max=0.001930 Jy/beam
! Clean residual mean=-0.000001 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.403918 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 66 components and 0.403918 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.065 mas, bmaj=2.93 mas, bpa=-40.71 degrees
! Estimated noise=0.682817 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00252189 Jy
! Component: 100  -  total flux cleaned = 0.00418478 Jy
! Component: 150  -  total flux cleaned = 0.0053131 Jy
! Component: 200  -  total flux cleaned = 0.00585802 Jy
! Total flux subtracted in 200 components = 0.00585802 Jy
! Clean residual min=-0.002113 max=0.001574 Jy/beam
! Clean residual mean=-0.000000 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.409776 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0003251 Jy
! Component: 100  -  total flux cleaned = 0.000673917 Jy
! Component: 150  -  total flux cleaned = 0.000987209 Jy
! Component: 200  -  total flux cleaned = 0.00121914 Jy
! Total flux subtracted in 200 components = 0.00121914 Jy
! Clean residual min=-0.001910 max=0.001478 Jy/beam
! Clean residual mean=-0.000000 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.410995 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 114 components and 0.410995 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8597 mas, bmaj=2.631 mas, bpa=-33.98 degrees
! Estimated noise=0.550153 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.11002e-05 Jy
! Component: 100  -  total flux cleaned = 0.000348938 Jy
! Component: 150  -  total flux cleaned = 0.000527533 Jy
! Component: 200  -  total flux cleaned = 0.000666639 Jy
! Total flux subtracted in 200 components = 0.000666639 Jy
! Clean residual min=-0.001591 max=0.001401 Jy/beam
! Clean residual mean=-0.000000 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.411662 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 141 components and 0.411662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056835Jy  sigma=0.788294
! Fit after  self-cal, rms=0.056828Jy  sigma=0.788232
wmodel J0607+6720_X_map.mod
! Writing 141 model components to file: J0607+6720_X_map.mod
wobs   J0607+6720_X_uvs.fits
! Writing UV FITS file: J0607+6720_X_uvs.fits
wwins  J0607+6720_X_map.win
! wwins: Wrote 5 windows to J0607+6720_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000363795 Jy
! Component: 100  -  total flux cleaned = -0.000680869 Jy
! Component: 150  -  total flux cleaned = -0.000796734 Jy
! Component: 200  -  total flux cleaned = -0.00090775 Jy
! Component: 250  -  total flux cleaned = -0.00105736 Jy
! Component: 300  -  total flux cleaned = -0.00116029 Jy
! Component: 350  -  total flux cleaned = -0.00121992 Jy
! Component: 400  -  total flux cleaned = -0.00123928 Jy
! Component: 450  -  total flux cleaned = -0.00133393 Jy
! Component: 500  -  total flux cleaned = -0.00138904 Jy
! Component: 550  -  total flux cleaned = -0.00138885 Jy
! Component: 600  -  total flux cleaned = -0.00140673 Jy
! Component: 650  -  total flux cleaned = -0.00138942 Jy
! Component: 700  -  total flux cleaned = -0.00140659 Jy
! Component: 750  -  total flux cleaned = -0.00144012 Jy
! Component: 800  -  total flux cleaned = -0.00140661 Jy
! Component: 850  -  total flux cleaned = -0.00140638 Jy
! Component: 900  -  total flux cleaned = -0.00140632 Jy
! Component: 950  -  total flux cleaned = -0.0013744 Jy
! Component: 1000  -  total flux cleaned = -0.00139003 Jy
! Component: 1050  -  total flux cleaned = -0.00135861 Jy
! Component: 1100  -  total flux cleaned = -0.00128194 Jy
! Component: 1150  -  total flux cleaned = -0.00123665 Jy
! Component: 1200  -  total flux cleaned = -0.00119188 Jy
! Component: 1250  -  total flux cleaned = -0.00119198 Jy
! Component: 1300  -  total flux cleaned = -0.00119181 Jy
! Component: 1350  -  total flux cleaned = -0.0011772 Jy
! Component: 1400  -  total flux cleaned = -0.00119136 Jy
! Component: 1450  -  total flux cleaned = -0.00116292 Jy
! Component: 1500  -  total flux cleaned = -0.00119098 Jy
! Component: 1550  -  total flux cleaned = -0.00120478 Jy
! Component: 1600  -  total flux cleaned = -0.00121835 Jy
! Component: 1650  -  total flux cleaned = -0.00120471 Jy
! Component: 1700  -  total flux cleaned = -0.00121816 Jy
! Component: 1750  -  total flux cleaned = -0.00124463 Jy
! Component: 1800  -  total flux cleaned = -0.00123119 Jy
! Component: 1850  -  total flux cleaned = -0.0012704 Jy
! Component: 1900  -  total flux cleaned = -0.0012702 Jy
! Component: 1950  -  total flux cleaned = -0.00128286 Jy
! Component: 2000  -  total flux cleaned = -0.00133388 Jy
! Component: 2050  -  total flux cleaned = -0.00134638 Jy
! Component: 2100  -  total flux cleaned = -0.00133391 Jy
! Component: 2150  -  total flux cleaned = -0.00134653 Jy
! Component: 2200  -  total flux cleaned = -0.0013343 Jy
! Component: 2250  -  total flux cleaned = -0.00137089 Jy
! Component: 2300  -  total flux cleaned = -0.00135876 Jy
! Component: 2350  -  total flux cleaned = -0.00135875 Jy
! Component: 2400  -  total flux cleaned = -0.00133486 Jy
! Component: 2450  -  total flux cleaned = -0.00133488 Jy
! Component: 2500  -  total flux cleaned = -0.00137003 Jy
! Component: 2550  -  total flux cleaned = -0.00133489 Jy
! Component: 2600  -  total flux cleaned = -0.00134653 Jy
! Component: 2650  -  total flux cleaned = -0.00135808 Jy
! Component: 2700  -  total flux cleaned = -0.00136947 Jy
! Component: 2750  -  total flux cleaned = -0.00138069 Jy
! Component: 2800  -  total flux cleaned = -0.00140309 Jy
! Component: 2850  -  total flux cleaned = -0.00141426 Jy
! Component: 2900  -  total flux cleaned = -0.00141417 Jy
! Component: 2950  -  total flux cleaned = -0.00141421 Jy
! Component: 3000  -  total flux cleaned = -0.00143606 Jy
! Component: 3050  -  total flux cleaned = -0.00146865 Jy
! Component: 3100  -  total flux cleaned = -0.00149019 Jy
! Component: 3150  -  total flux cleaned = -0.00149008 Jy
! Component: 3200  -  total flux cleaned = -0.00149005 Jy
! Component: 3250  -  total flux cleaned = -0.00147957 Jy
! Component: 3300  -  total flux cleaned = -0.00151108 Jy
! Component: 3350  -  total flux cleaned = -0.00147972 Jy
! Component: 3400  -  total flux cleaned = -0.0015005 Jy
! Component: 3450  -  total flux cleaned = -0.00151085 Jy
! Component: 3500  -  total flux cleaned = -0.00149035 Jy
! Component: 3550  -  total flux cleaned = -0.00152103 Jy
! Component: 3600  -  total flux cleaned = -0.00151086 Jy
! Component: 3650  -  total flux cleaned = -0.00150083 Jy
! Component: 3700  -  total flux cleaned = -0.00151089 Jy
! Component: 3750  -  total flux cleaned = -0.0015208 Jy
! Component: 3800  -  total flux cleaned = -0.00151082 Jy
! Component: 3850  -  total flux cleaned = -0.00150094 Jy
! Component: 3900  -  total flux cleaned = -0.00155993 Jy
! Component: 3950  -  total flux cleaned = -0.00155014 Jy
! Component: 4000  -  total flux cleaned = -0.00157944 Jy
! Component: 4050  -  total flux cleaned = -0.00160847 Jy
! Total flux subtracted in 4096 components = -0.00159887 Jy
! Clean residual min=-0.000531 max=0.000670 Jy/beam
! Clean residual mean=0.000000 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.410063 Jy
keep
! Adding 229 model components to the UV plane model.
! The established model now contains 370 components and 0.410063 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/bp222/maps//J0607+6720_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8597 x 2.631 at -33.98 degrees (North through East)
! Clean map  min=-0.0010861  max=0.28329 Jy/beam
! Writing clean map to FITS file: /vlbi/bp222/maps//J0607+6720_X_map.fits
wmodel /vlbi/bp222/maps//J0607+6720_X_map.mod
! Writing 370 model components to file: /vlbi/bp222/maps//J0607+6720_X_map.mod
wobs   /vlbi/bp222/maps//J0607+6720_X_uvs.fits
! Writing UV FITS file: /vlbi/bp222/maps//J0607+6720_X_uvs.fits
wwins  /vlbi/bp222/maps//J0607+6720_X_map.win
! wwins: Wrote 6 windows to /vlbi/bp222/maps//J0607+6720_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.283293 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000158703 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.168063 0.168063 0.336126 0.672252 1.3445 2.68901 5.37802 10.756 21.5121 43.0241 86.0482
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.283 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1785.05 
quit
! Quitting program
! Log file /vlbi/bp222/maps//J0607+6720_X_dfm.log closed on Mon Jan 14 16:30:12 2019