! Started logfile: J0534-3747_S_dfm.log on Fri Feb 15 19:45:12 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J0534-3747_S_uva.fits
! Reading UV FITS file: J0534-3747_S_uva.fits
! AN table 1: 120 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.759722 visibilities/baseline/integration-bin.
! Found source: J0534-3747
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 13128 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0534-3747_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 134 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 134 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 134 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1080 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.041932Jy  sigma=10.688456
! Fit after  self-cal, rms=0.796028Jy  sigma=7.878216
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.609 mas, bmaj=8.547 mas, bpa=-1.136 degrees
! Estimated noise=1.20052 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.156466 Jy
! Component: 100  -  total flux cleaned = 0.199085 Jy
! Total flux subtracted in 100 components = 0.199085 Jy
! Clean residual min=-0.024389 max=0.078696 Jy/beam
! Clean residual mean=-0.000611 rms=0.007026 Jy/beam
! Combined flux in latest and established models = 0.199085 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.199085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.164769Jy  sigma=1.751600
! Fit after  self-cal, rms=0.164823Jy  sigma=1.751145
! Inverting map 
! Added new window around map position (-12, -10).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0648565 Jy
! Component: 100  -  total flux cleaned = 0.0951309 Jy
! Total flux subtracted in 100 components = 0.0951309 Jy
! Clean residual min=-0.017116 max=0.038501 Jy/beam
! Clean residual mean=-0.000433 rms=0.004902 Jy/beam
! Combined flux in latest and established models = 0.294216 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 26 components and 0.294216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.129942Jy  sigma=1.326836
! Fit after  self-cal, rms=0.125140Jy  sigma=1.283812
! Inverting map 
! Added new window around map position (6, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0333014 Jy
! Component: 100  -  total flux cleaned = 0.056224 Jy
! Total flux subtracted in 100 components = 0.056224 Jy
! Clean residual min=-0.012965 max=0.027455 Jy/beam
! Clean residual mean=-0.000332 rms=0.003617 Jy/beam
! Combined flux in latest and established models = 0.35044 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 46 components and 0.35044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.110443Jy  sigma=1.094782
! Fit after  self-cal, rms=0.109908Jy  sigma=1.089562
! Inverting map 
! Added new window around map position (-6, 10.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.026347 Jy
! Component: 100  -  total flux cleaned = 0.0445299 Jy
! Total flux subtracted in 100 components = 0.0445299 Jy
! Clean residual min=-0.011986 max=0.017187 Jy/beam
! Clean residual mean=-0.000251 rms=0.002971 Jy/beam
! Combined flux in latest and established models = 0.39497 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 59 components and 0.39497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.098567Jy  sigma=0.948783
! Fit after  self-cal, rms=0.098380Jy  sigma=0.946126
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.417 mas, bmaj=10.63 mas, bpa=-0.5128 degrees
! Estimated noise=0.739425 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0298684 Jy
! Component: 100  -  total flux cleaned = 0.0504667 Jy
! Component: 150  -  total flux cleaned = 0.0657785 Jy
! Component: 200  -  total flux cleaned = 0.0774509 Jy
! Total flux subtracted in 200 components = 0.0774509 Jy
! Clean residual min=-0.009552 max=0.016508 Jy/beam
! Clean residual mean=-0.000235 rms=0.002841 Jy/beam
! Combined flux in latest and established models = 0.472421 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 84 components and 0.472421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.088008Jy  sigma=0.798264
! Fit after  self-cal, rms=0.087463Jy  sigma=0.792906
! Inverting map 
! Added new window around map position (-16.5, -15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159624 Jy
! Component: 100  -  total flux cleaned = 0.0247215 Jy
! Component: 150  -  total flux cleaned = 0.0292183 Jy
! Component: 200  -  total flux cleaned = 0.0326806 Jy
! Total flux subtracted in 200 components = 0.0326806 Jy
! Clean residual min=-0.007260 max=0.009956 Jy/beam
! Clean residual mean=-0.000074 rms=0.002102 Jy/beam
! Combined flux in latest and established models = 0.505101 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 107 components and 0.505102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.084234Jy  sigma=0.756213
! Fit after  self-cal, rms=0.083843Jy  sigma=0.751959
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.417 x 10.63 at -0.5128 degrees (North through East)
! Clean map  min=-0.0072294  max=0.19353 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        1.33     KP        0.96     LA        0.93     
!   MK        0.94     NL        1.00     OV        0.97     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.36     KP        0.96     LA        0.95     
!   MK        0.98     NL        1.08     OV        0.97     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        1.36     KP        0.97     LA        0.93     
!   MK        1.00     NL        1.03     OV        0.99     PT        0.99     
!   SC        0.98     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.083843Jy  sigma=0.751959
! Fit after  self-cal, rms=0.089947Jy  sigma=0.727325
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.419 mas, bmaj=10.56 mas, bpa=-0.2095 degrees
! Estimated noise=0.747522 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00370252 Jy
! Component: 100  -  total flux cleaned = -0.00408108 Jy
! Component: 150  -  total flux cleaned = -0.00375328 Jy
! Component: 200  -  total flux cleaned = -0.00376398 Jy
! Total flux subtracted in 200 components = -0.00376398 Jy
! Clean residual min=-0.005875 max=0.007902 Jy/beam
! Clean residual mean=0.000003 rms=0.001475 Jy/beam
! Combined flux in latest and established models = 0.501338 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 127 components and 0.501338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.088721Jy  sigma=0.716551
! Fit after  self-cal, rms=0.088665Jy  sigma=0.714973
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.088665Jy  sigma=0.714973
! Fit after  self-cal, rms=0.090239Jy  sigma=0.705578
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.434 mas, bmaj=10.61 mas, bpa=-0.06014 degrees
! Estimated noise=0.744686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00491405 Jy
! Component: 100  -  total flux cleaned = -0.00507836 Jy
! Component: 150  -  total flux cleaned = -0.00520499 Jy
! Component: 200  -  total flux cleaned = -0.00509203 Jy
! Total flux subtracted in 200 components = -0.00509203 Jy
! Clean residual min=-0.004427 max=0.005968 Jy/beam
! Clean residual mean=0.000002 rms=0.001192 Jy/beam
! Combined flux in latest and established models = 0.496246 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 143 components and 0.496246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.089626Jy  sigma=0.700452
! Fit after  self-cal, rms=0.089592Jy  sigma=0.699719
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, -37.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00298996 Jy
! Component: 100  -  total flux cleaned = 0.00312605 Jy
! Component: 150  -  total flux cleaned = 0.00343096 Jy
! Component: 200  -  total flux cleaned = 0.00342853 Jy
! Total flux subtracted in 200 components = 0.00342853 Jy
! Clean residual min=-0.004022 max=0.005400 Jy/beam
! Clean residual mean=0.000008 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.499674 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 171 components and 0.499674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.089175Jy  sigma=0.695469
! Fit after  self-cal, rms=0.089102Jy  sigma=0.694688
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.089102Jy  sigma=0.694688
! Fit after  self-cal, rms=0.091946Jy  sigma=0.685673
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.439 mas, bmaj=10.66 mas, bpa=0.0784 degrees
! Estimated noise=0.744301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0020434 Jy
! Component: 100  -  total flux cleaned = -0.00204542 Jy
! Component: 150  -  total flux cleaned = -0.00186859 Jy
! Component: 200  -  total flux cleaned = -0.00178403 Jy
! Total flux subtracted in 200 components = -0.00178403 Jy
! Clean residual min=-0.003114 max=0.004532 Jy/beam
! Clean residual mean=0.000001 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.49789 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 203 components and 0.49789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.091656Jy  sigma=0.683073
! Fit after  self-cal, rms=0.091700Jy  sigma=0.682682
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8, 26.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190739 Jy
! Component: 100  -  total flux cleaned = 0.00308651 Jy
! Component: 150  -  total flux cleaned = 0.00362408 Jy
! Component: 200  -  total flux cleaned = 0.00386309 Jy
! Total flux subtracted in 200 components = 0.00386309 Jy
! Clean residual min=-0.002883 max=0.003205 Jy/beam
! Clean residual mean=0.000018 rms=0.000781 Jy/beam
! Combined flux in latest and established models = 0.501753 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 231 components and 0.501753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.091416Jy  sigma=0.680025
! Fit after  self-cal, rms=0.091405Jy  sigma=0.679890
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.091405Jy  sigma=0.679890
! Fit after  self-cal, rms=0.092335Jy  sigma=0.679404
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.106 mas, bmaj=25.83 mas, bpa=-2.541 degrees
! Estimated noise=0.870173 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000323311 Jy
! Component: 100  -  total flux cleaned = 0.000589693 Jy
! Component: 150  -  total flux cleaned = 0.000592654 Jy
! Component: 200  -  total flux cleaned = 0.000454042 Jy
! Total flux subtracted in 200 components = 0.000454042 Jy
! Clean residual min=-0.003205 max=0.003654 Jy/beam
! Clean residual mean=0.000034 rms=0.000907 Jy/beam
! Combined flux in latest and established models = 0.502207 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 250 components and 0.502207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.092184Jy  sigma=0.678147
! Fit after  self-cal, rms=0.092182Jy  sigma=0.678043
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000113266 Jy
! Component: 100  -  total flux cleaned = -7.3566e-05 Jy
! Component: 150  -  total flux cleaned = -0.000131107 Jy
! Component: 200  -  total flux cleaned = -0.000292591 Jy
! Total flux subtracted in 200 components = -0.000292591 Jy
! Clean residual min=-0.003072 max=0.003630 Jy/beam
! Clean residual mean=0.000036 rms=0.000871 Jy/beam
! Combined flux in latest and established models = 0.501915 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 260 components and 0.501915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.092109Jy  sigma=0.677510
! Fit after  self-cal, rms=0.092100Jy  sigma=0.677458
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.428 mas, bmaj=10.63 mas, bpa=-0.003992 degrees
! Estimated noise=0.742101 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.428 x 10.63 at -0.003992 degrees (North through East)
! Clean map  min=-0.0053365  max=0.19564 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.599 mas, bmaj=8.49 mas, bpa=-0.5893 degrees
! Estimated noise=1.2131 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.165533 Jy
! Component: 100  -  total flux cleaned = 0.237264 Jy
! Component: 150  -  total flux cleaned = 0.280438 Jy
! Component: 200  -  total flux cleaned = 0.311679 Jy
! Total flux subtracted in 200 components = 0.311679 Jy
! Clean residual min=-0.010100 max=0.019823 Jy/beam
! Clean residual mean=-0.000365 rms=0.003310 Jy/beam
! Combined flux in latest and established models = 0.311679 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 43 model components to the UV plane model.
! The established model now contains 43 components and 0.311679 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.428 mas, bmaj=10.63 mas, bpa=-0.003992 degrees
! Estimated noise=0.742101 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.5, -2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.047888 Jy
! Component: 100  -  total flux cleaned = 0.0808913 Jy
! Component: 150  -  total flux cleaned = 0.105028 Jy
! Component: 200  -  total flux cleaned = 0.123009 Jy
! Total flux subtracted in 200 components = 0.123009 Jy
! Clean residual min=-0.005993 max=0.011325 Jy/beam
! Clean residual mean=-0.000324 rms=0.002377 Jy/beam
! Combined flux in latest and established models = 0.434688 Jy
! Adding 91 model components to the UV plane model.
! The established model now contains 127 components and 0.434688 Jy
! Inverting map 
! Added new window around map position (0.5, -14).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139168 Jy
! Component: 100  -  total flux cleaned = 0.0246537 Jy
! Component: 150  -  total flux cleaned = 0.0330989 Jy
! Component: 200  -  total flux cleaned = 0.0398273 Jy
! Total flux subtracted in 200 components = 0.0398273 Jy
! Clean residual min=-0.003767 max=0.004168 Jy/beam
! Clean residual mean=-0.000125 rms=0.001141 Jy/beam
! Combined flux in latest and established models = 0.474516 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 207 components and 0.474516 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.106 mas, bmaj=25.83 mas, bpa=-2.541 degrees
! Estimated noise=0.870173 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00859929 Jy
! Component: 100  -  total flux cleaned = 0.014379 Jy
! Component: 150  -  total flux cleaned = 0.0185118 Jy
! Component: 200  -  total flux cleaned = 0.0215234 Jy
! Total flux subtracted in 200 components = 0.0215234 Jy
! Clean residual min=-0.003441 max=0.003373 Jy/beam
! Clean residual mean=-0.000030 rms=0.000958 Jy/beam
! Combined flux in latest and established models = 0.496039 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166108 Jy
! Component: 100  -  total flux cleaned = 0.00211548 Jy
! Component: 150  -  total flux cleaned = 0.00251697 Jy
! Component: 200  -  total flux cleaned = 0.00281271 Jy
! Total flux subtracted in 200 components = 0.00281271 Jy
! Clean residual min=-0.003266 max=0.003465 Jy/beam
! Clean residual mean=0.000003 rms=0.000850 Jy/beam
! Combined flux in latest and established models = 0.498852 Jy
! Adding 143 model components to the UV plane model.
! The established model now contains 345 components and 0.498852 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.428 mas, bmaj=10.63 mas, bpa=-0.003992 degrees
! Estimated noise=0.742101 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141839 Jy
! Component: 100  -  total flux cleaned = 0.00184045 Jy
! Component: 150  -  total flux cleaned = 0.00203202 Jy
! Component: 200  -  total flux cleaned = 0.00225259 Jy
! Total flux subtracted in 200 components = 0.00225259 Jy
! Clean residual min=-0.002962 max=0.002631 Jy/beam
! Clean residual mean=0.000012 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.501104 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 365 components and 0.501104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.091675Jy  sigma=0.675792
! Fit after  self-cal, rms=0.091549Jy  sigma=0.674947
wmodel J0534-3747_S_map.mod
! Writing 365 model components to file: J0534-3747_S_map.mod
wobs   J0534-3747_S_uvs.fits
! Writing UV FITS file: J0534-3747_S_uvs.fits
wwins  J0534-3747_S_map.win
! wwins: Wrote 9 windows to J0534-3747_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000820019 Jy
! Component: 100  -  total flux cleaned = -0.00103173 Jy
! Component: 150  -  total flux cleaned = -0.00103158 Jy
! Component: 200  -  total flux cleaned = -0.000845386 Jy
! Component: 250  -  total flux cleaned = -0.000739484 Jy
! Component: 300  -  total flux cleaned = -0.000739137 Jy
! Component: 350  -  total flux cleaned = -0.000641567 Jy
! Component: 400  -  total flux cleaned = -0.000514922 Jy
! Component: 450  -  total flux cleaned = -0.000422257 Jy
! Component: 500  -  total flux cleaned = -0.000422896 Jy
! Component: 550  -  total flux cleaned = -0.000364602 Jy
! Component: 600  -  total flux cleaned = -0.00045178 Jy
! Component: 650  -  total flux cleaned = -0.000395513 Jy
! Component: 700  -  total flux cleaned = -0.000368538 Jy
! Component: 750  -  total flux cleaned = -0.000450606 Jy
! Component: 800  -  total flux cleaned = -0.000530901 Jy
! Component: 850  -  total flux cleaned = -0.000556747 Jy
! Component: 900  -  total flux cleaned = -0.000556473 Jy
! Component: 950  -  total flux cleaned = -0.000607079 Jy
! Component: 1000  -  total flux cleaned = -0.000581708 Jy
! Component: 1050  -  total flux cleaned = -0.000532575 Jy
! Component: 1100  -  total flux cleaned = -0.000532752 Jy
! Component: 1150  -  total flux cleaned = -0.000557044 Jy
! Component: 1200  -  total flux cleaned = -0.000557191 Jy
! Component: 1250  -  total flux cleaned = -0.000627538 Jy
! Component: 1300  -  total flux cleaned = -0.000673865 Jy
! Component: 1350  -  total flux cleaned = -0.000719732 Jy
! Component: 1400  -  total flux cleaned = -0.000810327 Jy
! Component: 1450  -  total flux cleaned = -0.000832537 Jy
! Component: 1500  -  total flux cleaned = -0.00087661 Jy
! Component: 1550  -  total flux cleaned = -0.00100723 Jy
! Component: 1600  -  total flux cleaned = -0.000942552 Jy
! Component: 1650  -  total flux cleaned = -0.00104894 Jy
! Component: 1700  -  total flux cleaned = -0.00109114 Jy
! Component: 1750  -  total flux cleaned = -0.00115343 Jy
! Component: 1800  -  total flux cleaned = -0.0011119 Jy
! Component: 1850  -  total flux cleaned = -0.0011323 Jy
! Component: 1900  -  total flux cleaned = -0.00113232 Jy
! Component: 1950  -  total flux cleaned = -0.00117266 Jy
! Component: 2000  -  total flux cleaned = -0.00113296 Jy
! Component: 2050  -  total flux cleaned = -0.00115307 Jy
! Component: 2100  -  total flux cleaned = -0.00119248 Jy
! Component: 2150  -  total flux cleaned = -0.001251 Jy
! Component: 2200  -  total flux cleaned = -0.00128939 Jy
! Component: 2250  -  total flux cleaned = -0.0013653 Jy
! Component: 2300  -  total flux cleaned = -0.0012896 Jy
! Component: 2350  -  total flux cleaned = -0.0013457 Jy
! Component: 2400  -  total flux cleaned = -0.00134583 Jy
! Component: 2450  -  total flux cleaned = -0.00138284 Jy
! Component: 2500  -  total flux cleaned = -0.00138282 Jy
! Component: 2550  -  total flux cleaned = -0.00150963 Jy
! Component: 2600  -  total flux cleaned = -0.00156333 Jy
! Component: 2650  -  total flux cleaned = -0.00156318 Jy
! Component: 2700  -  total flux cleaned = -0.00159851 Jy
! Component: 2750  -  total flux cleaned = -0.00165148 Jy
! Component: 2800  -  total flux cleaned = -0.00163406 Jy
! Component: 2850  -  total flux cleaned = -0.00175564 Jy
! Component: 2900  -  total flux cleaned = -0.00175555 Jy
! Component: 2950  -  total flux cleaned = -0.00184103 Jy
! Component: 3000  -  total flux cleaned = -0.00187497 Jy
! Component: 3050  -  total flux cleaned = -0.00190862 Jy
! Component: 3100  -  total flux cleaned = -0.00192531 Jy
! Component: 3150  -  total flux cleaned = -0.00195863 Jy
! Component: 3200  -  total flux cleaned = -0.00200825 Jy
! Component: 3250  -  total flux cleaned = -0.00205749 Jy
! Component: 3300  -  total flux cleaned = -0.00207372 Jy
! Component: 3350  -  total flux cleaned = -0.00205742 Jy
! Component: 3400  -  total flux cleaned = -0.00210581 Jy
! Component: 3450  -  total flux cleaned = -0.00216976 Jy
! Component: 3500  -  total flux cleaned = -0.00218559 Jy
! Component: 3550  -  total flux cleaned = -0.00218579 Jy
! Component: 3600  -  total flux cleaned = -0.00223287 Jy
! Component: 3650  -  total flux cleaned = -0.0022953 Jy
! Component: 3700  -  total flux cleaned = -0.00229529 Jy
! Component: 3750  -  total flux cleaned = -0.00237238 Jy
! Component: 3800  -  total flux cleaned = -0.00241822 Jy
! Component: 3850  -  total flux cleaned = -0.00241827 Jy
! Component: 3900  -  total flux cleaned = -0.00249391 Jy
! Component: 3950  -  total flux cleaned = -0.00249403 Jy
! Component: 4000  -  total flux cleaned = -0.00252397 Jy
! Component: 4050  -  total flux cleaned = -0.00259835 Jy
! Total flux subtracted in 4096 components = -0.00265743 Jy
! Clean residual min=-0.000833 max=0.000900 Jy/beam
! Clean residual mean=0.000002 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.498447 Jy
keep
! Adding 326 model components to the UV plane model.
! The established model now contains 689 components and 0.498446 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J0534-3747_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.428 x 10.63 at -0.003992 degrees (North through East)
! Clean map  min=-0.0020279  max=0.20029 Jy/beam
! Writing clean map to FITS file: J0534-3747_S_map.fits
wmodel J0534-3747_S_map.mod
! Writing 689 model components to file: J0534-3747_S_map.mod
wobs   J0534-3747_S_uvs.fits
! Writing UV FITS file: J0534-3747_S_uvs.fits
wwins  J0534-3747_S_map.win
! wwins: Wrote 10 windows to J0534-3747_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.200293 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000299286 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.448272 0.448272 0.896544 1.79309 3.58617 7.17235 14.3447 28.6894 57.3788
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.2 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  669.236 
quit
! Quitting program
! Log file J0534-3747_S_dfm.log closed on Fri Feb 15 19:45:17 2019