! Started logfile: /vlbi/bp222/temp_maps//J0511+1357_X_dfm.log on Thu Feb 14 22:32:36 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0511+1357_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0511+1357_X_uvm.fits ! AN table 1: 118 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969303 visibilities/baseline/integration-bin. ! Found source: J0511+1357 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 61764 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0511+1357_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.013113Jy sigma=15.286084 ! Fit after self-cal, rms=0.870059Jy sigma=12.949344 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6513 mas, bmaj=1.69 mas, bpa=-3.659 degrees ! Estimated noise=0.3704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0934791 Jy ! Component: 100 - total flux cleaned = 0.122883 Jy ! Total flux subtracted in 100 components = 0.122883 Jy ! Clean residual min=-0.012559 max=0.048059 Jy/beam ! Clean residual mean=-0.000010 rms=0.002490 Jy/beam ! Combined flux in latest and established models = 0.122883 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.122883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104727Jy sigma=1.527282 ! Fit after self-cal, rms=0.104202Jy sigma=1.520622 ! Inverting map ! Added new window around map position (1.6, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415183 Jy ! Component: 100 - total flux cleaned = 0.0598381 Jy ! Total flux subtracted in 100 components = 0.0598381 Jy ! Clean residual min=-0.009823 max=0.023518 Jy/beam ! Clean residual mean=-0.000006 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 0.182721 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.182721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081830Jy sigma=1.140231 ! Fit after self-cal, rms=0.075090Jy sigma=1.047413 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206456 Jy ! Component: 100 - total flux cleaned = 0.0310619 Jy ! Total flux subtracted in 100 components = 0.0310619 Jy ! Clean residual min=-0.006643 max=0.013439 Jy/beam ! Clean residual mean=-0.000003 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.213783 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.213783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066725Jy sigma=0.896387 ! Fit after self-cal, rms=0.065515Jy sigma=0.881019 ! Inverting map ! Added new window around map position (0.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127787 Jy ! Component: 100 - total flux cleaned = 0.0192676 Jy ! Total flux subtracted in 100 components = 0.0192676 Jy ! Clean residual min=-0.004005 max=0.004503 Jy/beam ! Clean residual mean=-0.000002 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.23305 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 25 components and 0.23305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062431Jy sigma=0.824068 ! Fit after self-cal, rms=0.062190Jy sigma=0.821295 ! Inverting map ! Added new window around map position (2.4, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387576 Jy ! Component: 100 - total flux cleaned = 0.00523529 Jy ! Total flux subtracted in 100 components = 0.00523529 Jy ! Clean residual min=-0.003872 max=0.003866 Jy/beam ! Clean residual mean=-0.000002 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.238285 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.238285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061511Jy sigma=0.810955 ! Fit after self-cal, rms=0.061421Jy sigma=0.809773 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8423 mas, bmaj=2.002 mas, bpa=-3.381 degrees ! Estimated noise=0.200043 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0053492 Jy ! Component: 100 - total flux cleaned = 0.00817582 Jy ! Component: 150 - total flux cleaned = 0.00865776 Jy ! Component: 200 - total flux cleaned = 0.00890212 Jy ! Total flux subtracted in 200 components = 0.00890212 Jy ! Clean residual min=-0.004403 max=0.003331 Jy/beam ! Clean residual mean=-0.000002 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.247188 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 48 components and 0.247188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060860Jy sigma=0.800259 ! Fit after self-cal, rms=0.060788Jy sigma=0.799267 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8423 x 2.002 at -3.381 degrees (North through East) ! Clean map min=-0.0042763 max=0.11421 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.90 KP 1.03 ! LA 1.00 MK 1.05 NL 1.11 OV 0.90 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.86 KP 1.04 ! LA 1.01 MK 1.07 NL 1.12 OV 0.90 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.89 KP 1.04 ! LA 1.00 MK 1.07 NL 1.11 OV 0.90 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.88 KP 1.04 ! LA 1.01 MK 1.05 NL 1.12 OV 0.90 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.90 KP 1.04 ! LA 1.00 MK 1.07 NL 1.10 OV 0.90 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.88 KP 1.03 ! LA 1.01 MK 1.08 NL 1.13 OV 0.91 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.88 KP 1.04 ! LA 1.01 MK 1.04 NL 1.11 OV 0.92 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.89 KP 1.04 ! LA 1.01 MK 1.09 NL 1.14 OV 0.91 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.87 KP 1.05 ! LA 1.01 MK 1.06 NL 1.11 OV 0.91 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.88 KP 1.04 ! LA 1.02 MK 1.11 NL 1.10 OV 0.91 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.88 KP 1.04 ! LA 1.02 MK 1.02 NL 1.11 OV 0.92 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.89 KP 1.06 ! LA 1.01 MK 1.06 NL 1.11 OV 0.93 ! PT 0.97 SC 0.98 ! ! ! Fit before self-cal, rms=0.060788Jy sigma=0.799267 ! Fit after self-cal, rms=0.058764Jy sigma=0.776561 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8487 mas, bmaj=2.009 mas, bpa=-3.101 degrees ! Estimated noise=0.199911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.02191e-05 Jy ! Component: 100 - total flux cleaned = -0.000250256 Jy ! Component: 150 - total flux cleaned = -0.000312127 Jy ! Component: 200 - total flux cleaned = -0.000364511 Jy ! Total flux subtracted in 200 components = -0.000364511 Jy ! Clean residual min=-0.002517 max=0.002182 Jy/beam ! Clean residual mean=-0.000003 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.246823 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 66 components and 0.246823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058522Jy sigma=0.773913 ! Fit after self-cal, rms=0.058479Jy sigma=0.773109 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058479Jy sigma=0.773109 ! Fit after self-cal, rms=0.059789Jy sigma=0.754040 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8486 mas, bmaj=2.004 mas, bpa=-3.429 degrees ! Estimated noise=0.200503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000385037 Jy ! Component: 100 - total flux cleaned = 0.000395022 Jy ! Component: 150 - total flux cleaned = 0.000276772 Jy ! Component: 200 - total flux cleaned = 0.000185172 Jy ! Total flux subtracted in 200 components = 0.000185172 Jy ! Clean residual min=-0.000792 max=0.000987 Jy/beam ! Clean residual mean=-0.000001 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.247008 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 73 components and 0.247008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059696Jy sigma=0.753019 ! Fit after self-cal, rms=0.059689Jy sigma=0.752803 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000596862 Jy ! Component: 100 - total flux cleaned = 0.000888008 Jy ! Component: 150 - total flux cleaned = 0.000995534 Jy ! Component: 200 - total flux cleaned = 0.00106611 Jy ! Total flux subtracted in 200 components = 0.00106611 Jy ! Clean residual min=-0.000826 max=0.000897 Jy/beam ! Clean residual mean=-0.000001 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.248074 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 0.248074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059644Jy sigma=0.752487 ! Fit after self-cal, rms=0.059640Jy sigma=0.752429 ! Inverting map ! Added new window around map position (11, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000678348 Jy ! Component: 100 - total flux cleaned = 0.001028 Jy ! Component: 150 - total flux cleaned = 0.00134903 Jy ! Component: 200 - total flux cleaned = 0.00151845 Jy ! Total flux subtracted in 200 components = 0.00151845 Jy ! Clean residual min=-0.000830 max=0.000896 Jy/beam ! Clean residual mean=-0.000000 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.249593 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 98 components and 0.249593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059614Jy sigma=0.752185 ! Fit after self-cal, rms=0.059612Jy sigma=0.752157 ! Inverting map ! Added new window around map position (-2.6, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418238 Jy ! Component: 100 - total flux cleaned = 0.000570271 Jy ! Component: 150 - total flux cleaned = 0.000742657 Jy ! Component: 200 - total flux cleaned = 0.000900768 Jy ! Total flux subtracted in 200 components = 0.000900768 Jy ! Clean residual min=-0.000778 max=0.000803 Jy/beam ! Clean residual mean=-0.000000 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.250494 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 111 components and 0.250494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059591Jy sigma=0.751955 ! Fit after self-cal, rms=0.059590Jy sigma=0.751931 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059590Jy sigma=0.751931 ! Fit after self-cal, rms=0.060554Jy sigma=0.750703 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8482 mas, bmaj=2.004 mas, bpa=-3.433 degrees ! Estimated noise=0.200614 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000248548 Jy ! Component: 100 - total flux cleaned = 0.000344404 Jy ! Component: 150 - total flux cleaned = 0.000413721 Jy ! Component: 200 - total flux cleaned = 0.000493952 Jy ! Total flux subtracted in 200 components = 0.000493952 Jy ! Clean residual min=-0.000731 max=0.000710 Jy/beam ! Clean residual mean=-0.000000 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.250988 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 128 components and 0.250988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060540Jy sigma=0.750576 ! Fit after self-cal, rms=0.060545Jy sigma=0.750558 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130117 Jy ! Component: 100 - total flux cleaned = 0.0001907 Jy ! Component: 150 - total flux cleaned = 0.000219405 Jy ! Component: 200 - total flux cleaned = 0.000272912 Jy ! Total flux subtracted in 200 components = 0.000272912 Jy ! Clean residual min=-0.000722 max=0.000701 Jy/beam ! Clean residual mean=-0.000000 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.25126 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 136 components and 0.25126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060536Jy sigma=0.750484 ! Fit after self-cal, rms=0.060536Jy sigma=0.750482 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060536Jy sigma=0.750482 ! Fit after self-cal, rms=0.060580Jy sigma=0.750466 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.121 mas, bmaj=2.963 mas, bpa=-0.9374 degrees ! Estimated noise=0.254702 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103243 Jy ! Component: 100 - total flux cleaned = 0.000204745 Jy ! Component: 150 - total flux cleaned = 0.000265361 Jy ! Component: 200 - total flux cleaned = 0.000296078 Jy ! Total flux subtracted in 200 components = 0.000296078 Jy ! Clean residual min=-0.000726 max=0.000628 Jy/beam ! Clean residual mean=0.000000 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.251557 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 153 components and 0.251557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060576Jy sigma=0.750420 ! Fit after self-cal, rms=0.060575Jy sigma=0.750414 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.43303e-07 Jy ! Component: 100 - total flux cleaned = 4.99651e-05 Jy ! Component: 150 - total flux cleaned = 8.55392e-05 Jy ! Component: 200 - total flux cleaned = 0.000127083 Jy ! Total flux subtracted in 200 components = 0.000127083 Jy ! Clean residual min=-0.000705 max=0.000622 Jy/beam ! Clean residual mean=0.000000 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.251684 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 163 components and 0.251684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060573Jy sigma=0.750402 ! Fit after self-cal, rms=0.060572Jy sigma=0.750400 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8479 mas, bmaj=2.004 mas, bpa=-3.428 degrees ! Estimated noise=0.200687 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8479 x 2.004 at -3.428 degrees (North through East) ! Clean map min=-0.00067948 max=0.11183 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6547 mas, bmaj=1.693 mas, bpa=-3.85 degrees ! Estimated noise=0.373139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103568 Jy ! Component: 100 - total flux cleaned = 0.149532 Jy ! Component: 150 - total flux cleaned = 0.178059 Jy ! Component: 200 - total flux cleaned = 0.197528 Jy ! Total flux subtracted in 200 components = 0.197528 Jy ! Clean residual min=-0.003804 max=0.010612 Jy/beam ! Clean residual mean=-0.000004 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.197528 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.197528 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8479 mas, bmaj=2.004 mas, bpa=-3.428 degrees ! Estimated noise=0.200687 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206351 Jy ! Component: 100 - total flux cleaned = 0.0318474 Jy ! Component: 150 - total flux cleaned = 0.0383583 Jy ! Component: 200 - total flux cleaned = 0.0424039 Jy ! Total flux subtracted in 200 components = 0.0424039 Jy ! Clean residual min=-0.001149 max=0.002125 Jy/beam ! Clean residual mean=-0.000002 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.239932 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 34 components and 0.239932 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263754 Jy ! Component: 100 - total flux cleaned = 0.00450412 Jy ! Component: 150 - total flux cleaned = 0.00592215 Jy ! Component: 200 - total flux cleaned = 0.00705607 Jy ! Total flux subtracted in 200 components = 0.00705607 Jy ! Clean residual min=-0.000920 max=0.000932 Jy/beam ! Clean residual mean=-0.000001 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.246988 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 64 components and 0.246988 Jy ! Inverting map ! Added new window around map position (2.2, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104683 Jy ! Component: 100 - total flux cleaned = 0.00183535 Jy ! Component: 150 - total flux cleaned = 0.00240627 Jy ! Component: 200 - total flux cleaned = 0.0027332 Jy ! Total flux subtracted in 200 components = 0.0027332 Jy ! Clean residual min=-0.000800 max=0.000716 Jy/beam ! Clean residual mean=-0.000000 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.249721 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 87 components and 0.249721 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.121 mas, bmaj=2.963 mas, bpa=-0.9374 degrees ! Estimated noise=0.254702 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000638446 Jy ! Component: 100 - total flux cleaned = 0.00100863 Jy ! Component: 150 - total flux cleaned = 0.00121915 Jy ! Component: 200 - total flux cleaned = 0.00140805 Jy ! Total flux subtracted in 200 components = 0.00140805 Jy ! Clean residual min=-0.000749 max=0.000687 Jy/beam ! Clean residual mean=-0.000000 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.251129 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138748 Jy ! Component: 100 - total flux cleaned = 0.000267281 Jy ! Component: 150 - total flux cleaned = 0.000400822 Jy ! Component: 200 - total flux cleaned = 0.000497135 Jy ! Total flux subtracted in 200 components = 0.000497135 Jy ! Clean residual min=-0.000731 max=0.000704 Jy/beam ! Clean residual mean=-0.000000 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.251627 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 126 components and 0.251627 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8479 mas, bmaj=2.004 mas, bpa=-3.428 degrees ! Estimated noise=0.200687 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169499 Jy ! Component: 100 - total flux cleaned = -9.08939e-05 Jy ! Component: 150 - total flux cleaned = -1.73635e-05 Jy ! Component: 200 - total flux cleaned = 5.1556e-05 Jy ! Total flux subtracted in 200 components = 5.1556e-05 Jy ! Clean residual min=-0.000689 max=0.000677 Jy/beam ! Clean residual mean=-0.000000 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.251678 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 147 components and 0.251678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060567Jy sigma=0.750394 ! Fit after self-cal, rms=0.060563Jy sigma=0.750278 wmodel J0511+1357_X_map.mod ! Writing 147 model components to file: J0511+1357_X_map.mod wobs J0511+1357_X_uvs.fits ! Writing UV FITS file: J0511+1357_X_uvs.fits wwins J0511+1357_X_map.win ! wwins: Wrote 8 windows to J0511+1357_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.95533e-05 Jy ! Component: 100 - total flux cleaned = 2.72921e-05 Jy ! Component: 150 - total flux cleaned = 2.72513e-05 Jy ! Component: 200 - total flux cleaned = 5.01309e-05 Jy ! Component: 250 - total flux cleaned = 4.98317e-05 Jy ! Component: 300 - total flux cleaned = 4.97073e-05 Jy ! Component: 350 - total flux cleaned = 3.88218e-05 Jy ! Component: 400 - total flux cleaned = 4.94998e-05 Jy ! Component: 450 - total flux cleaned = 9.14139e-05 Jy ! Component: 500 - total flux cleaned = 9.14443e-05 Jy ! Component: 550 - total flux cleaned = 0.000111966 Jy ! Component: 600 - total flux cleaned = 0.000101983 Jy ! Component: 650 - total flux cleaned = 0.000141964 Jy ! Component: 700 - total flux cleaned = 0.000112269 Jy ! Component: 750 - total flux cleaned = 0.000112427 Jy ! Component: 800 - total flux cleaned = 0.000170549 Jy ! Component: 850 - total flux cleaned = 0.000199144 Jy ! Component: 900 - total flux cleaned = 0.000217954 Jy ! Component: 950 - total flux cleaned = 0.000246133 Jy ! Component: 1000 - total flux cleaned = 0.000283335 Jy ! Component: 1050 - total flux cleaned = 0.000292521 Jy ! Component: 1100 - total flux cleaned = 0.000320021 Jy ! Component: 1150 - total flux cleaned = 0.000356448 Jy ! Component: 1200 - total flux cleaned = 0.000374415 Jy ! Component: 1250 - total flux cleaned = 0.000383388 Jy ! Component: 1300 - total flux cleaned = 0.000365689 Jy ! Component: 1350 - total flux cleaned = 0.000374455 Jy ! Component: 1400 - total flux cleaned = 0.000357198 Jy ! Component: 1450 - total flux cleaned = 0.000374521 Jy ! Component: 1500 - total flux cleaned = 0.000348668 Jy ! Component: 1550 - total flux cleaned = 0.000331632 Jy ! Component: 1600 - total flux cleaned = 0.000365657 Jy ! Component: 1650 - total flux cleaned = 0.000340364 Jy ! Component: 1700 - total flux cleaned = 0.000357158 Jy ! Component: 1750 - total flux cleaned = 0.0003821 Jy ! Component: 1800 - total flux cleaned = 0.000357183 Jy ! Component: 1850 - total flux cleaned = 0.000373674 Jy ! Component: 1900 - total flux cleaned = 0.000390058 Jy ! Component: 1950 - total flux cleaned = 0.000381952 Jy ! Component: 2000 - total flux cleaned = 0.000422453 Jy ! Component: 2050 - total flux cleaned = 0.000398218 Jy ! Component: 2100 - total flux cleaned = 0.000398193 Jy ! Component: 2150 - total flux cleaned = 0.000398247 Jy ! Component: 2200 - total flux cleaned = 0.000437922 Jy ! Component: 2250 - total flux cleaned = 0.000437878 Jy ! Component: 2300 - total flux cleaned = 0.000422157 Jy ! Component: 2350 - total flux cleaned = 0.000453461 Jy ! Component: 2400 - total flux cleaned = 0.000468947 Jy ! Component: 2450 - total flux cleaned = 0.000476663 Jy ! Component: 2500 - total flux cleaned = 0.000499699 Jy ! Component: 2550 - total flux cleaned = 0.000461379 Jy ! Component: 2600 - total flux cleaned = 0.000476738 Jy ! Component: 2650 - total flux cleaned = 0.000529893 Jy ! Component: 2700 - total flux cleaned = 0.000537489 Jy ! Component: 2750 - total flux cleaned = 0.000529953 Jy ! Component: 2800 - total flux cleaned = 0.000544976 Jy ! Component: 2850 - total flux cleaned = 0.000522593 Jy ! Component: 2900 - total flux cleaned = 0.000515155 Jy ! Component: 2950 - total flux cleaned = 0.000544731 Jy ! Component: 3000 - total flux cleaned = 0.000559428 Jy ! Component: 3050 - total flux cleaned = 0.000544814 Jy ! Component: 3100 - total flux cleaned = 0.000537502 Jy ! Component: 3150 - total flux cleaned = 0.000559246 Jy ! Component: 3200 - total flux cleaned = 0.000602662 Jy ! Component: 3250 - total flux cleaned = 0.000609854 Jy ! Component: 3300 - total flux cleaned = 0.000609874 Jy ! Component: 3350 - total flux cleaned = 0.00060272 Jy ! Component: 3400 - total flux cleaned = 0.000581411 Jy ! Component: 3450 - total flux cleaned = 0.00058144 Jy ! Component: 3500 - total flux cleaned = 0.000588553 Jy ! Component: 3550 - total flux cleaned = 0.000602629 Jy ! Component: 3600 - total flux cleaned = 0.000595689 Jy ! Component: 3650 - total flux cleaned = 0.000574774 Jy ! Component: 3700 - total flux cleaned = 0.000588672 Jy ! Component: 3750 - total flux cleaned = 0.00062334 Jy ! Component: 3800 - total flux cleaned = 0.00063707 Jy ! Component: 3850 - total flux cleaned = 0.000623307 Jy ! Component: 3900 - total flux cleaned = 0.000650684 Jy ! Component: 3950 - total flux cleaned = 0.000671134 Jy ! Component: 4000 - total flux cleaned = 0.000684706 Jy ! Component: 4050 - total flux cleaned = 0.000684755 Jy ! Total flux subtracted in 4096 components = 0.000684725 Jy ! Clean residual min=-0.000375 max=0.000381 Jy/beam ! Clean residual mean=-0.000000 rms=0.000121 Jy/beam ! Combined flux in latest and established models = 0.252363 Jy keep ! Adding 338 model components to the UV plane model. ! The established model now contains 485 components and 0.252363 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0511+1357_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8479 x 2.004 at -3.428 degrees (North through East) ! Clean map min=-0.0006279 max=0.1114 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0511+1357_X_map.fits wmodel /vlbi/bp222/temp_maps//J0511+1357_X_map.mod ! Writing 485 model components to file: /vlbi/bp222/temp_maps//J0511+1357_X_map.mod wobs /vlbi/bp222/temp_maps//J0511+1357_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0511+1357_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0511+1357_X_map.win ! wwins: Wrote 9 windows to /vlbi/bp222/temp_maps//J0511+1357_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.111405 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000121249 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.326509 0.326509 0.653018 1.30604 2.61207 5.22414 10.4483 20.8966 41.7931 83.5863 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.111 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 918.811 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0511+1357_X_dfm.log closed on Thu Feb 14 22:32:45 2019