! Started logfile: /vlbi/bp222/temp_maps//J0506+2141_X_dfm.log on Thu Feb 14 22:32:09 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/bp222/temp_maps//J0506+2141_X_uvm.fits
! Reading UV FITS file: /vlbi/bp222/temp_maps//J0506+2141_X_uvm.fits
! AN table 1: 118 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.969115 visibilities/baseline/integration-bin.
! Found source: J0506+2141
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 61752 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0506+2141_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004902Jy  sigma=16.536826
! Fit after  self-cal, rms=0.893801Jy  sigma=14.670242
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6521 mas, bmaj=1.642 mas, bpa=-2.203 degrees
! Estimated noise=0.377694 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0785991 Jy
! Component: 100  -  total flux cleaned = 0.100343 Jy
! Total flux subtracted in 100 components = 0.100343 Jy
! Clean residual min=-0.003480 max=0.009701 Jy/beam
! Clean residual mean=0.000002 rms=0.000736 Jy/beam
! Combined flux in latest and established models = 0.100343 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.100343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062804Jy  sigma=0.919400
! Fit after  self-cal, rms=0.062709Jy  sigma=0.918618
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109125 Jy
! Component: 100  -  total flux cleaned = 0.0166437 Jy
! Total flux subtracted in 100 components = 0.0166437 Jy
! Clean residual min=-0.003612 max=0.004862 Jy/beam
! Clean residual mean=0.000000 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.116987 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 7 components and 0.116987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060543Jy  sigma=0.878453
! Fit after  self-cal, rms=0.060518Jy  sigma=0.878249
! Inverting map 
! Added new window around map position (-1.8, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00458877 Jy
! Component: 100  -  total flux cleaned = 0.00734193 Jy
! Total flux subtracted in 100 components = 0.00734193 Jy
! Clean residual min=-0.003451 max=0.003837 Jy/beam
! Clean residual mean=-0.000000 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.124329 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 0.124329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060112Jy  sigma=0.871796
! Fit after  self-cal, rms=0.060067Jy  sigma=0.870902
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8542 mas, bmaj=1.932 mas, bpa=-1.912 degrees
! Estimated noise=0.181405 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00265184 Jy
! Component: 100  -  total flux cleaned = 0.00388243 Jy
! Component: 150  -  total flux cleaned = 0.00407545 Jy
! Component: 200  -  total flux cleaned = 0.00416884 Jy
! Total flux subtracted in 200 components = 0.00416884 Jy
! Clean residual min=-0.003482 max=0.003274 Jy/beam
! Clean residual mean=-0.000000 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.128498 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 29 components and 0.128498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059922Jy  sigma=0.869123
! Fit after  self-cal, rms=0.059907Jy  sigma=0.868740
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8542 x 1.932 at -1.912 degrees (North through East)
! Clean map  min=-0.0033151  max=0.10552 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.86     KP        1.06     
!   LA        1.01     MK        1.12     NL        1.12     OV        0.94     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.86     KP        1.05     
!   LA        1.01     MK        1.11     NL        1.09     OV        0.92     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.88     KP        1.05     
!   LA        1.02     MK        1.09     NL        1.12     OV        0.93     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.88     KP        1.05     
!   LA        1.03     MK        1.11     NL        1.11     OV        0.94     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.85     KP        1.05     
!   LA        1.01     MK        1.12     NL        1.13     OV        0.92     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.84     KP        1.05     
!   LA        1.02     MK        1.10     NL        1.10     OV        0.91     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.90     KP        1.05     
!   LA        1.02     MK        1.07     NL        1.09     OV        0.93     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.88     KP        1.05     
!   LA        1.02     MK        1.11     NL        1.10     OV        0.93     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 9.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.84     KP        1.05     
!   LA        1.02     MK        1.10     NL        1.10     OV        0.93     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 10.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.86     KP        1.07     
!   LA        1.00     MK        1.09     NL        1.13     OV        0.92     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 11.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.85     KP        1.06     
!   LA        1.02     MK        1.08     NL        1.13     OV        0.93     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 12.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.84     KP        1.06     
!   LA        1.02     MK        1.10     NL        1.11     OV        0.91     
!   PT        0.99     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.059907Jy  sigma=0.868740
! Fit after  self-cal, rms=0.057751Jy  sigma=0.853457
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8626 mas, bmaj=1.932 mas, bpa=-1.561 degrees
! Estimated noise=0.182628 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000502004 Jy
! Component: 100  -  total flux cleaned = -0.000371459 Jy
! Component: 150  -  total flux cleaned = -0.000369852 Jy
! Component: 200  -  total flux cleaned = -0.000339435 Jy
! Total flux subtracted in 200 components = -0.000339435 Jy
! Clean residual min=-0.001427 max=0.001166 Jy/beam
! Clean residual mean=-0.000001 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.128158 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 42 components and 0.128158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057678Jy  sigma=0.852031
! Fit after  self-cal, rms=0.057680Jy  sigma=0.851640
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057680Jy  sigma=0.851640
! Fit after  self-cal, rms=0.057297Jy  sigma=0.847876
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8598 mas, bmaj=1.93 mas, bpa=-2.048 degrees
! Estimated noise=0.182005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000219104 Jy
! Component: 100  -  total flux cleaned = -0.000148607 Jy
! Component: 150  -  total flux cleaned = -0.000113031 Jy
! Component: 200  -  total flux cleaned = -8.29691e-05 Jy
! Total flux subtracted in 200 components = -8.29691e-05 Jy
! Clean residual min=-0.000892 max=0.000961 Jy/beam
! Clean residual mean=0.000000 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.128075 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 53 components and 0.128075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057280Jy  sigma=0.847563
! Fit after  self-cal, rms=0.057288Jy  sigma=0.847501
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8, -25).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00049356 Jy
! Component: 100  -  total flux cleaned = 0.000473533 Jy
! Component: 150  -  total flux cleaned = 0.000488761 Jy
! Component: 200  -  total flux cleaned = 0.000529631 Jy
! Total flux subtracted in 200 components = 0.000529631 Jy
! Clean residual min=-0.000890 max=0.000977 Jy/beam
! Clean residual mean=0.000000 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.128605 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 65 components and 0.128605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057273Jy  sigma=0.847256
! Fit after  self-cal, rms=0.057272Jy  sigma=0.847237
! Inverting map 
! Added new window around map position (-14.6, 37.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000637409 Jy
! Component: 100  -  total flux cleaned = 0.000673563 Jy
! Component: 150  -  total flux cleaned = 0.000641186 Jy
! Component: 200  -  total flux cleaned = 0.000657017 Jy
! Total flux subtracted in 200 components = 0.000657017 Jy
! Clean residual min=-0.000876 max=0.000962 Jy/beam
! Clean residual mean=-0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.129262 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 85 components and 0.129262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057255Jy  sigma=0.846950
! Fit after  self-cal, rms=0.057253Jy  sigma=0.846931
! Inverting map 
! Added new window around map position (-16.8, -31.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000624752 Jy
! Component: 100  -  total flux cleaned = 0.000578956 Jy
! Component: 150  -  total flux cleaned = 0.000612482 Jy
! Component: 200  -  total flux cleaned = 0.000626974 Jy
! Total flux subtracted in 200 components = 0.000626974 Jy
! Clean residual min=-0.000897 max=0.000918 Jy/beam
! Clean residual mean=0.000000 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.129889 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 99 components and 0.129889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057232Jy  sigma=0.846718
! Fit after  self-cal, rms=0.057231Jy  sigma=0.846699
! Inverting map 
! Added new window around map position (13, -24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000347457 Jy
! Component: 100  -  total flux cleaned = 0.000395794 Jy
! Component: 150  -  total flux cleaned = 0.000489331 Jy
! Component: 200  -  total flux cleaned = 0.000601734 Jy
! Total flux subtracted in 200 components = 0.000601734 Jy
! Clean residual min=-0.000909 max=0.000923 Jy/beam
! Clean residual mean=-0.000000 rms=0.000206 Jy/beam
! Combined flux in latest and established models = 0.130491 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 117 components and 0.130491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057207Jy  sigma=0.846478
! Fit after  self-cal, rms=0.057206Jy  sigma=0.846454
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057206Jy  sigma=0.846454
! Fit after  self-cal, rms=0.059551Jy  sigma=0.843622
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8582 mas, bmaj=1.928 mas, bpa=-2.11 degrees
! Estimated noise=0.182206 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000146868 Jy
! Component: 100  -  total flux cleaned = -0.000107344 Jy
! Component: 150  -  total flux cleaned = -0.000152465 Jy
! Component: 200  -  total flux cleaned = -0.000248069 Jy
! Total flux subtracted in 200 components = -0.000248069 Jy
! Clean residual min=-0.000703 max=0.000709 Jy/beam
! Clean residual mean=-0.000000 rms=0.000154 Jy/beam
! Combined flux in latest and established models = 0.130242 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 131 components and 0.130243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059539Jy  sigma=0.843455
! Fit after  self-cal, rms=0.059569Jy  sigma=0.843404
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.21208e-06 Jy
! Component: 100  -  total flux cleaned = -7.09314e-05 Jy
! Component: 150  -  total flux cleaned = -0.000141955 Jy
! Component: 200  -  total flux cleaned = -0.000220199 Jy
! Total flux subtracted in 200 components = -0.000220199 Jy
! Clean residual min=-0.000777 max=0.000681 Jy/beam
! Clean residual mean=-0.000000 rms=0.000153 Jy/beam
! Combined flux in latest and established models = 0.130022 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 139 components and 0.130022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059563Jy  sigma=0.843331
! Fit after  self-cal, rms=0.059563Jy  sigma=0.843324
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059563Jy  sigma=0.843324
! Fit after  self-cal, rms=0.059753Jy  sigma=0.843289
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.12 mas, bmaj=2.844 mas, bpa=-0.6541 degrees
! Estimated noise=0.231754 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000388848 Jy
! Component: 100  -  total flux cleaned = -0.000492549 Jy
! Component: 150  -  total flux cleaned = -0.000602239 Jy
! Component: 200  -  total flux cleaned = -0.000678563 Jy
! Total flux subtracted in 200 components = -0.000678563 Jy
! Clean residual min=-0.000639 max=0.000714 Jy/beam
! Clean residual mean=-0.000000 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.129344 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 156 components and 0.129344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059751Jy  sigma=0.843249
! Fit after  self-cal, rms=0.059753Jy  sigma=0.843240
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (39, 5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000543197 Jy
! Component: 100  -  total flux cleaned = 0.000560475 Jy
! Component: 150  -  total flux cleaned = 0.000480729 Jy
! Component: 200  -  total flux cleaned = 0.0004088 Jy
! Total flux subtracted in 200 components = 0.0004088 Jy
! Clean residual min=-0.000587 max=0.000608 Jy/beam
! Clean residual mean=-0.000000 rms=0.000153 Jy/beam
! Combined flux in latest and established models = 0.129753 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 180 components and 0.129753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059747Jy  sigma=0.843116
! Fit after  self-cal, rms=0.059746Jy  sigma=0.843104
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8573 mas, bmaj=1.929 mas, bpa=-2.136 degrees
! Estimated noise=0.182277 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8573 x 1.929 at -2.136 degrees (North through East)
! Clean map  min=-0.00054507  max=0.10621 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6555 mas, bmaj=1.642 mas, bpa=-2.496 degrees
! Estimated noise=0.38031 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0787913 Jy
! Component: 100  -  total flux cleaned = 0.100773 Jy
! Component: 150  -  total flux cleaned = 0.1115 Jy
! Component: 200  -  total flux cleaned = 0.117637 Jy
! Total flux subtracted in 200 components = 0.117637 Jy
! Clean residual min=-0.001823 max=0.003197 Jy/beam
! Clean residual mean=0.000001 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.117637 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.117637 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8573 mas, bmaj=1.929 mas, bpa=-2.136 degrees
! Estimated noise=0.182277 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00451716 Jy
! Component: 100  -  total flux cleaned = 0.0068696 Jy
! Component: 150  -  total flux cleaned = 0.00827384 Jy
! Component: 200  -  total flux cleaned = 0.00929173 Jy
! Total flux subtracted in 200 components = 0.00929173 Jy
! Clean residual min=-0.000831 max=0.000863 Jy/beam
! Clean residual mean=0.000000 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.126928 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 28 components and 0.126928 Jy
! Inverting map 
! Added new window around map position (-0.6, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000900223 Jy
! Component: 100  -  total flux cleaned = 0.00154649 Jy
! Component: 150  -  total flux cleaned = 0.00191403 Jy
! Component: 200  -  total flux cleaned = 0.00215465 Jy
! Total flux subtracted in 200 components = 0.00215465 Jy
! Clean residual min=-0.000754 max=0.000783 Jy/beam
! Clean residual mean=-0.000000 rms=0.000157 Jy/beam
! Combined flux in latest and established models = 0.129083 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 50 components and 0.129083 Jy
! Inverting map 
! Added new window around map position (-3.8, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000502953 Jy
! Component: 100  -  total flux cleaned = 0.000656003 Jy
! Component: 150  -  total flux cleaned = 0.000718968 Jy
! Component: 200  -  total flux cleaned = 0.000839086 Jy
! Total flux subtracted in 200 components = 0.000839086 Jy
! Clean residual min=-0.000685 max=0.000743 Jy/beam
! Clean residual mean=-0.000000 rms=0.000153 Jy/beam
! Combined flux in latest and established models = 0.129922 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 74 components and 0.129922 Jy
! Inverting map 
! Added new window around map position (-2.6, -14.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000638364 Jy
! Component: 100  -  total flux cleaned = 0.000856304 Jy
! Component: 150  -  total flux cleaned = 0.000987524 Jy
! Component: 200  -  total flux cleaned = 0.00107776 Jy
! Total flux subtracted in 200 components = 0.00107776 Jy
! Clean residual min=-0.000647 max=0.000627 Jy/beam
! Clean residual mean=-0.000000 rms=0.000148 Jy/beam
! Combined flux in latest and established models = 0.131 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 99 components and 0.131 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.12 mas, bmaj=2.844 mas, bpa=-0.6541 degrees
! Estimated noise=0.231754 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00029147 Jy
! Component: 100  -  total flux cleaned = 0.000290507 Jy
! Component: 150  -  total flux cleaned = 0.000290009 Jy
! Component: 200  -  total flux cleaned = 0.000277359 Jy
! Total flux subtracted in 200 components = 0.000277359 Jy
! Clean residual min=-0.000552 max=0.000570 Jy/beam
! Clean residual mean=-0.000000 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.131277 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.15296e-07 Jy
! Component: 100  -  total flux cleaned = -1.1328e-05 Jy
! Component: 150  -  total flux cleaned = -6.17423e-05 Jy
! Component: 200  -  total flux cleaned = -0.000128506 Jy
! Total flux subtracted in 200 components = -0.000128506 Jy
! Clean residual min=-0.000544 max=0.000562 Jy/beam
! Clean residual mean=-0.000000 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.131149 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 149 components and 0.131149 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8573 mas, bmaj=1.929 mas, bpa=-2.136 degrees
! Estimated noise=0.182277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.3107e-05 Jy
! Component: 100  -  total flux cleaned = 0.000168815 Jy
! Component: 150  -  total flux cleaned = 0.00020166 Jy
! Component: 200  -  total flux cleaned = 0.000233506 Jy
! Total flux subtracted in 200 components = 0.000233506 Jy
! Clean residual min=-0.000598 max=0.000608 Jy/beam
! Clean residual mean=-0.000000 rms=0.000143 Jy/beam
! Combined flux in latest and established models = 0.131382 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 166 components and 0.131382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059737Jy  sigma=0.843062
! Fit after  self-cal, rms=0.059733Jy  sigma=0.842978
wmodel J0506+2141_X_map.mod
! Writing 166 model components to file: J0506+2141_X_map.mod
wobs   J0506+2141_X_uvs.fits
! Writing UV FITS file: J0506+2141_X_uvs.fits
wwins  J0506+2141_X_map.win
! wwins: Wrote 10 windows to J0506+2141_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000182954 Jy
! Component: 100  -  total flux cleaned = -0.000151279 Jy
! Component: 150  -  total flux cleaned = -0.000100897 Jy
! Component: 200  -  total flux cleaned = -0.000101004 Jy
! Component: 250  -  total flux cleaned = -0.000110748 Jy
! Component: 300  -  total flux cleaned = -0.000120234 Jy
! Component: 350  -  total flux cleaned = -0.000138848 Jy
! Component: 400  -  total flux cleaned = -0.000147949 Jy
! Component: 450  -  total flux cleaned = -0.00012972 Jy
! Component: 500  -  total flux cleaned = -0.000120682 Jy
! Component: 550  -  total flux cleaned = -0.00011186 Jy
! Component: 600  -  total flux cleaned = -0.000120745 Jy
! Component: 650  -  total flux cleaned = -0.000120817 Jy
! Component: 700  -  total flux cleaned = -0.000138034 Jy
! Component: 750  -  total flux cleaned = -0.000146493 Jy
! Component: 800  -  total flux cleaned = -0.000154901 Jy
! Component: 850  -  total flux cleaned = -0.000138266 Jy
! Component: 900  -  total flux cleaned = -0.00015487 Jy
! Component: 950  -  total flux cleaned = -0.000163135 Jy
! Component: 1000  -  total flux cleaned = -0.000187668 Jy
! Component: 1050  -  total flux cleaned = -0.000187681 Jy
! Component: 1100  -  total flux cleaned = -0.000235956 Jy
! Component: 1150  -  total flux cleaned = -0.000187967 Jy
! Component: 1200  -  total flux cleaned = -0.000235644 Jy
! Component: 1250  -  total flux cleaned = -0.000235543 Jy
! Component: 1300  -  total flux cleaned = -0.000212066 Jy
! Component: 1350  -  total flux cleaned = -0.000251098 Jy
! Component: 1400  -  total flux cleaned = -0.000243301 Jy
! Component: 1450  -  total flux cleaned = -0.000266354 Jy
! Component: 1500  -  total flux cleaned = -0.00025867 Jy
! Component: 1550  -  total flux cleaned = -0.00025867 Jy
! Component: 1600  -  total flux cleaned = -0.000281423 Jy
! Component: 1650  -  total flux cleaned = -0.000273846 Jy
! Component: 1700  -  total flux cleaned = -0.000303781 Jy
! Component: 1750  -  total flux cleaned = -0.000273904 Jy
! Component: 1800  -  total flux cleaned = -0.000281371 Jy
! Component: 1850  -  total flux cleaned = -0.000288712 Jy
! Component: 1900  -  total flux cleaned = -0.000318036 Jy
! Component: 1950  -  total flux cleaned = -0.000310746 Jy
! Component: 2000  -  total flux cleaned = -0.00033255 Jy
! Component: 2050  -  total flux cleaned = -0.000339828 Jy
! Component: 2100  -  total flux cleaned = -0.000354288 Jy
! Component: 2150  -  total flux cleaned = -0.000332755 Jy
! Component: 2200  -  total flux cleaned = -0.000368421 Jy
! Component: 2250  -  total flux cleaned = -0.000382634 Jy
! Component: 2300  -  total flux cleaned = -0.000396775 Jy
! Component: 2350  -  total flux cleaned = -0.000410863 Jy
! Component: 2400  -  total flux cleaned = -0.000417847 Jy
! Component: 2450  -  total flux cleaned = -0.000424818 Jy
! Component: 2500  -  total flux cleaned = -0.000431797 Jy
! Component: 2550  -  total flux cleaned = -0.00045939 Jy
! Component: 2600  -  total flux cleaned = -0.000438751 Jy
! Component: 2650  -  total flux cleaned = -0.000431878 Jy
! Component: 2700  -  total flux cleaned = -0.000459226 Jy
! Component: 2750  -  total flux cleaned = -0.000479617 Jy
! Component: 2800  -  total flux cleaned = -0.000472857 Jy
! Component: 2850  -  total flux cleaned = -0.000452618 Jy
! Component: 2900  -  total flux cleaned = -0.000472711 Jy
! Component: 2950  -  total flux cleaned = -0.000479382 Jy
! Component: 3000  -  total flux cleaned = -0.000499372 Jy
! Component: 3050  -  total flux cleaned = -0.000492744 Jy
! Component: 3100  -  total flux cleaned = -0.000519211 Jy
! Component: 3150  -  total flux cleaned = -0.000539049 Jy
! Component: 3200  -  total flux cleaned = -0.000499635 Jy
! Component: 3250  -  total flux cleaned = -0.000545491 Jy
! Component: 3300  -  total flux cleaned = -0.000532411 Jy
! Component: 3350  -  total flux cleaned = -0.000558443 Jy
! Component: 3400  -  total flux cleaned = -0.000564953 Jy
! Component: 3450  -  total flux cleaned = -0.000584304 Jy
! Component: 3500  -  total flux cleaned = -0.000597193 Jy
! Component: 3550  -  total flux cleaned = -0.000616472 Jy
! Component: 3600  -  total flux cleaned = -0.000597325 Jy
! Component: 3650  -  total flux cleaned = -0.000622797 Jy
! Component: 3700  -  total flux cleaned = -0.000629122 Jy
! Component: 3750  -  total flux cleaned = -0.00060384 Jy
! Component: 3800  -  total flux cleaned = -0.000603871 Jy
! Component: 3850  -  total flux cleaned = -0.000654176 Jy
! Component: 3900  -  total flux cleaned = -0.000635368 Jy
! Component: 3950  -  total flux cleaned = -0.000647836 Jy
! Component: 4000  -  total flux cleaned = -0.000654056 Jy
! Component: 4050  -  total flux cleaned = -0.000654066 Jy
! Total flux subtracted in 4096 components = -0.000672643 Jy
! Clean residual min=-0.000365 max=0.000328 Jy/beam
! Clean residual mean=-0.000000 rms=0.000110 Jy/beam
! Combined flux in latest and established models = 0.130709 Jy
keep
! Adding 347 model components to the UV plane model.
! The established model now contains 512 components and 0.130709 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/bp222/temp_maps//J0506+2141_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8573 x 1.929 at -2.136 degrees (North through East)
! Clean map  min=-0.00052067  max=0.10654 Jy/beam
! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0506+2141_X_map.fits
wmodel /vlbi/bp222/temp_maps//J0506+2141_X_map.mod
! Writing 512 model components to file: /vlbi/bp222/temp_maps//J0506+2141_X_map.mod
wobs   /vlbi/bp222/temp_maps//J0506+2141_X_uvs.fits
! Writing UV FITS file: /vlbi/bp222/temp_maps//J0506+2141_X_uvs.fits
wwins  /vlbi/bp222/temp_maps//J0506+2141_X_map.win
! wwins: Wrote 11 windows to /vlbi/bp222/temp_maps//J0506+2141_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.106542 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00010978 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.309117 0.309117 0.618233 1.23647 2.47293 4.94587 9.89173 19.7835 39.5669 79.1339
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.106 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  970.507 
quit
! Quitting program
! Log file /vlbi/bp222/temp_maps//J0506+2141_X_dfm.log closed on Thu Feb 14 22:32:17 2019