! Started logfile: J0445+0715_S_dfm.log on Fri Feb 15 19:44:20 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J0445+0715_S_uvm.fits
! Reading UV FITS file: J0445+0715_S_uvm.fits
! AN table 1: 23 integrations on 28 of 28 possible baselines.
! AN table 2: 69 integrations on 28 of 28 possible baselines.
! AN table 3: 24 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.873906 visibilities/baseline/integration-bin.
! Found source: J0445+0715
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 12780 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0445+0715_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 58 telescope corrections were flagged in sub-array 2.
!  A total of 4 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 58 telescope corrections were flagged in sub-array 2.
!  A total of 4 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 58 telescope corrections were flagged in sub-array 2.
!  A total of 4 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 97 telescope corrections were flagged in sub-array 1.
!  A total of 276 telescope corrections were flagged in sub-array 2.
!  A total of 240 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.019042Jy  sigma=17.433011
! Fit after  self-cal, rms=0.814204Jy  sigma=13.819519
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.771 mas, bmaj=9.024 mas, bpa=-12.7 degrees
! Estimated noise=0.593966 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.151696 Jy
! Component: 100  -  total flux cleaned = 0.184799 Jy
! Total flux subtracted in 100 components = 0.184799 Jy
! Clean residual min=-0.003206 max=0.009450 Jy/beam
! Clean residual mean=0.000014 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.184799 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.184799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.053692Jy  sigma=0.869017
! Fit after  self-cal, rms=0.053689Jy  sigma=0.868957
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00840903 Jy
! Component: 100  -  total flux cleaned = 0.0123067 Jy
! Total flux subtracted in 100 components = 0.0123067 Jy
! Clean residual min=-0.002912 max=0.003131 Jy/beam
! Clean residual mean=0.000007 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.197106 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 21 components and 0.197106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.052117Jy  sigma=0.838562
! Fit after  self-cal, rms=0.052120Jy  sigma=0.838539
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.399 mas, bmaj=10.25 mas, bpa=-12.36 degrees
! Estimated noise=0.435411 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00370325 Jy
! Component: 100  -  total flux cleaned = 0.00615492 Jy
! Component: 150  -  total flux cleaned = 0.00782674 Jy
! Component: 200  -  total flux cleaned = 0.00898079 Jy
! Total flux subtracted in 200 components = 0.00898079 Jy
! Clean residual min=-0.002443 max=0.002643 Jy/beam
! Clean residual mean=0.000007 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.206087 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 40 components and 0.206087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.051886Jy  sigma=0.831755
! Fit after  self-cal, rms=0.051890Jy  sigma=0.831734
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.399 x 10.25 at -12.36 degrees (North through East)
! Clean map  min=-0.0023585  max=0.19471 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.99     HN        1.00     LA        0.99     
!   MK        1.04     NL        1.06     OV        1.03     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00     HN        1.01     KP        0.99     LA        1.05     
!   MK        1.01     NL        1.05     OV        1.01     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.95     FD        1.01     HN        1.04     KP        0.97     
!   LA        0.94     MK        0.93     NL        1.04     OV        0.98     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.96     HN        1.04     LA        1.02     
!   MK        1.01     NL        0.98     OV        1.02     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     HN        1.02     KP        1.02     LA        0.98     
!   MK        1.00     NL        1.02     OV        1.01     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.55     FD        1.02     HN        1.06     KP        0.98     
!   LA        0.94     MK        0.86     NL        1.13     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.05     LA        0.93     
!   MK        1.04     NL        0.92     OV        1.01     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.99     HN        1.02     KP        1.01     LA        0.94     
!   MK        1.03     NL        0.99     OV        1.01     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.76     FD        1.01     HN        1.00     KP        0.97     
!   LA        0.93     MK        0.95     NL        1.05     OV        0.99     
!   PT        1.01     SC        0.99     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.051890Jy  sigma=0.831734
! Fit after  self-cal, rms=0.048579Jy  sigma=0.787609
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.405 mas, bmaj=10.31 mas, bpa=-12.29 degrees
! Estimated noise=0.435039 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000571959 Jy
! Component: 100  -  total flux cleaned = -0.000703455 Jy
! Component: 150  -  total flux cleaned = -0.000766412 Jy
! Component: 200  -  total flux cleaned = -0.000821836 Jy
! Total flux subtracted in 200 components = -0.000821836 Jy
! Clean residual min=-0.001316 max=0.001119 Jy/beam
! Clean residual mean=0.000000 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.205265 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 46 components and 0.205265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.048564Jy  sigma=0.787400
! Fit after  self-cal, rms=0.048577Jy  sigma=0.787247
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.048577Jy  sigma=0.787247
! Fit after  self-cal, rms=0.048533Jy  sigma=0.786645
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.406 mas, bmaj=10.31 mas, bpa=-12.29 degrees
! Estimated noise=0.434634 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000362421 Jy
! Component: 100  -  total flux cleaned = -0.000488269 Jy
! Component: 150  -  total flux cleaned = -0.000548575 Jy
! Component: 200  -  total flux cleaned = -0.000592194 Jy
! Total flux subtracted in 200 components = -0.000592194 Jy
! Clean residual min=-0.001262 max=0.001090 Jy/beam
! Clean residual mean=0.000000 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.204673 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 52 components and 0.204673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.048525Jy  sigma=0.786535
! Fit after  self-cal, rms=0.048524Jy  sigma=0.786530
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.16479e-06 Jy
! Component: 100  -  total flux cleaned = -2.78615e-05 Jy
! Component: 150  -  total flux cleaned = -4.65469e-05 Jy
! Component: 200  -  total flux cleaned = -3.77501e-05 Jy
! Total flux subtracted in 200 components = -3.77501e-05 Jy
! Clean residual min=-0.001247 max=0.001077 Jy/beam
! Clean residual mean=0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.204635 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 55 components and 0.204635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.048520Jy  sigma=0.786479
! Fit after  self-cal, rms=0.048520Jy  sigma=0.786477
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.048520Jy  sigma=0.786477
! Fit after  self-cal, rms=0.048445Jy  sigma=0.784426
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.407 mas, bmaj=10.31 mas, bpa=-12.29 degrees
! Estimated noise=0.434288 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000314438 Jy
! Component: 100  -  total flux cleaned = -0.00037507 Jy
! Component: 150  -  total flux cleaned = -0.000402465 Jy
! Component: 200  -  total flux cleaned = -0.000402763 Jy
! Total flux subtracted in 200 components = -0.000402763 Jy
! Clean residual min=-0.001155 max=0.000981 Jy/beam
! Clean residual mean=-0.000000 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.204232 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 55 components and 0.204232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.048441Jy  sigma=0.784371
! Fit after  self-cal, rms=0.048442Jy  sigma=0.784359
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.16981e-08 Jy
! Component: 100  -  total flux cleaned = -8.47587e-06 Jy
! Component: 150  -  total flux cleaned = -8.84908e-06 Jy
! Component: 200  -  total flux cleaned = -9.62095e-06 Jy
! Total flux subtracted in 200 components = -9.62095e-06 Jy
! Clean residual min=-0.001147 max=0.000974 Jy/beam
! Clean residual mean=-0.000000 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.204223 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 57 components and 0.204223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.048439Jy  sigma=0.784326
! Fit after  self-cal, rms=0.048439Jy  sigma=0.784325
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.048439Jy  sigma=0.784325
! Fit after  self-cal, rms=0.048424Jy  sigma=0.784310
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.589 mas, bmaj=14.71 mas, bpa=-15.36 degrees
! Estimated noise=0.504117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000194369 Jy
! Component: 100  -  total flux cleaned = -0.000204105 Jy
! Component: 150  -  total flux cleaned = -0.00020007 Jy
! Component: 200  -  total flux cleaned = -0.000196177 Jy
! Total flux subtracted in 200 components = -0.000196177 Jy
! Clean residual min=-0.001298 max=0.001228 Jy/beam
! Clean residual mean=-0.000001 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.204026 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 67 components and 0.204026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.048423Jy  sigma=0.784308
! Fit after  self-cal, rms=0.048424Jy  sigma=0.784303
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.80141e-05 Jy
! Component: 100  -  total flux cleaned = 2.29395e-05 Jy
! Component: 150  -  total flux cleaned = 2.2735e-05 Jy
! Component: 200  -  total flux cleaned = 2.61224e-05 Jy
! Total flux subtracted in 200 components = 2.61224e-05 Jy
! Clean residual min=-0.001299 max=0.001220 Jy/beam
! Clean residual mean=-0.000001 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.204053 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 71 components and 0.204052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.048423Jy  sigma=0.784300
! Fit after  self-cal, rms=0.048424Jy  sigma=0.784297
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.408 mas, bmaj=10.31 mas, bpa=-12.28 degrees
! Estimated noise=0.434008 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.408 x 10.31 at -12.28 degrees (North through East)
! Clean map  min=-0.0010587  max=0.19413 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.776 mas, bmaj=9.126 mas, bpa=-12.68 degrees
! Estimated noise=0.594444 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.151801 Jy
! Component: 100  -  total flux cleaned = 0.184911 Jy
! Component: 150  -  total flux cleaned = 0.192918 Jy
! Component: 200  -  total flux cleaned = 0.196216 Jy
! Total flux subtracted in 200 components = 0.196216 Jy
! Clean residual min=-0.001670 max=0.001720 Jy/beam
! Clean residual mean=0.000004 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.196216 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.196216 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.408 mas, bmaj=10.31 mas, bpa=-12.28 degrees
! Estimated noise=0.434008 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00268842 Jy
! Component: 100  -  total flux cleaned = 0.00430072 Jy
! Component: 150  -  total flux cleaned = 0.00535873 Jy
! Component: 200  -  total flux cleaned = 0.0060792 Jy
! Total flux subtracted in 200 components = 0.0060792 Jy
! Clean residual min=-0.001156 max=0.001028 Jy/beam
! Clean residual mean=0.000002 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.202295 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 39 components and 0.202295 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.589 mas, bmaj=14.71 mas, bpa=-15.36 degrees
! Estimated noise=0.504117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000717109 Jy
! Component: 100  -  total flux cleaned = 0.00110088 Jy
! Component: 150  -  total flux cleaned = 0.00131855 Jy
! Component: 200  -  total flux cleaned = 0.00138187 Jy
! Total flux subtracted in 200 components = 0.00138187 Jy
! Clean residual min=-0.001361 max=0.001231 Jy/beam
! Clean residual mean=0.000000 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.203677 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.51413e-05 Jy
! Component: 100  -  total flux cleaned = 5.27307e-05 Jy
! Component: 150  -  total flux cleaned = 6.98698e-05 Jy
! Component: 200  -  total flux cleaned = 8.65736e-05 Jy
! Total flux subtracted in 200 components = 8.65736e-05 Jy
! Clean residual min=-0.001356 max=0.001226 Jy/beam
! Clean residual mean=-0.000000 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.203763 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 50 components and 0.203763 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.408 mas, bmaj=10.31 mas, bpa=-12.28 degrees
! Estimated noise=0.434008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.18186e-05 Jy
! Component: 100  -  total flux cleaned = -7.33458e-05 Jy
! Component: 150  -  total flux cleaned = -9.80608e-05 Jy
! Component: 200  -  total flux cleaned = -0.000105047 Jy
! Total flux subtracted in 200 components = -0.000105047 Jy
! Clean residual min=-0.001112 max=0.000946 Jy/beam
! Clean residual mean=-0.000000 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.203658 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 60 components and 0.203658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.048419Jy  sigma=0.784214
! Fit after  self-cal, rms=0.048417Jy  sigma=0.784210
wmodel J0445+0715_S_map.mod
! Writing 60 model components to file: J0445+0715_S_map.mod
wobs   J0445+0715_S_uvs.fits
! Writing UV FITS file: J0445+0715_S_uvs.fits
wwins  J0445+0715_S_map.win
! wwins: Wrote 1 windows to J0445+0715_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000463461 Jy
! Component: 100  -  total flux cleaned = -0.000374003 Jy
! Component: 150  -  total flux cleaned = -0.000270454 Jy
! Component: 200  -  total flux cleaned = -0.000170327 Jy
! Component: 250  -  total flux cleaned = -5.6853e-05 Jy
! Component: 300  -  total flux cleaned = 5.36592e-05 Jy
! Component: 350  -  total flux cleaned = 0.000130937 Jy
! Component: 400  -  total flux cleaned = 0.000236707 Jy
! Component: 450  -  total flux cleaned = 0.000325355 Jy
! Component: 500  -  total flux cleaned = 0.000383539 Jy
! Component: 550  -  total flux cleaned = 0.000426398 Jy
! Component: 600  -  total flux cleaned = 0.000468571 Jy
! Component: 650  -  total flux cleaned = 0.000496119 Jy
! Component: 700  -  total flux cleaned = 0.000468839 Jy
! Component: 750  -  total flux cleaned = 0.000495716 Jy
! Component: 800  -  total flux cleaned = 0.000442614 Jy
! Component: 850  -  total flux cleaned = 0.000442662 Jy
! Component: 900  -  total flux cleaned = 0.000404145 Jy
! Component: 950  -  total flux cleaned = 0.000429727 Jy
! Component: 1000  -  total flux cleaned = 0.000404274 Jy
! Component: 1050  -  total flux cleaned = 0.000416764 Jy
! Component: 1100  -  total flux cleaned = 0.000416654 Jy
! Component: 1150  -  total flux cleaned = 0.0004167 Jy
! Component: 1200  -  total flux cleaned = 0.000440647 Jy
! Component: 1250  -  total flux cleaned = 0.000452361 Jy
! Component: 1300  -  total flux cleaned = 0.000452351 Jy
! Component: 1350  -  total flux cleaned = 0.000498833 Jy
! Component: 1400  -  total flux cleaned = 0.000499037 Jy
! Component: 1450  -  total flux cleaned = 0.000487626 Jy
! Component: 1500  -  total flux cleaned = 0.000521423 Jy
! Component: 1550  -  total flux cleaned = 0.000521334 Jy
! Component: 1600  -  total flux cleaned = 0.000499452 Jy
! Component: 1650  -  total flux cleaned = 0.000554122 Jy
! Component: 1700  -  total flux cleaned = 0.000543229 Jy
! Component: 1750  -  total flux cleaned = 0.000543242 Jy
! Component: 1800  -  total flux cleaned = 0.00057505 Jy
! Component: 1850  -  total flux cleaned = 0.000522386 Jy
! Component: 1900  -  total flux cleaned = 0.000532818 Jy
! Component: 1950  -  total flux cleaned = 0.000522497 Jy
! Component: 2000  -  total flux cleaned = 0.000491751 Jy
! Component: 2050  -  total flux cleaned = 0.000502037 Jy
! Component: 2100  -  total flux cleaned = 0.000481794 Jy
! Component: 2150  -  total flux cleaned = 0.000481728 Jy
! Component: 2200  -  total flux cleaned = 0.000432109 Jy
! Component: 2250  -  total flux cleaned = 0.000441934 Jy
! Component: 2300  -  total flux cleaned = 0.000392882 Jy
! Component: 2350  -  total flux cleaned = 0.000383139 Jy
! Component: 2400  -  total flux cleaned = 0.000334946 Jy
! Component: 2450  -  total flux cleaned = 0.000287135 Jy
! Component: 2500  -  total flux cleaned = 0.000258832 Jy
! Component: 2550  -  total flux cleaned = 0.00026815 Jy
! Component: 2600  -  total flux cleaned = 0.000230526 Jy
! Component: 2650  -  total flux cleaned = 0.000165497 Jy
! Component: 2700  -  total flux cleaned = 0.000128639 Jy
! Component: 2750  -  total flux cleaned = 9.18156e-05 Jy
! Component: 2800  -  total flux cleaned = 6.44662e-05 Jy
! Component: 2850  -  total flux cleaned = 2.83272e-05 Jy
! Component: 2900  -  total flux cleaned = 1.3636e-06 Jy
! Component: 2950  -  total flux cleaned = 1.4431e-06 Jy
! Component: 3000  -  total flux cleaned = -7.83866e-05 Jy
! Component: 3050  -  total flux cleaned = -0.000131298 Jy
! Component: 3100  -  total flux cleaned = -0.000104875 Jy
! Component: 3150  -  total flux cleaned = -0.000131008 Jy
! Component: 3200  -  total flux cleaned = -0.000139664 Jy
! Component: 3250  -  total flux cleaned = -0.000191407 Jy
! Component: 3300  -  total flux cleaned = -0.000182898 Jy
! Component: 3350  -  total flux cleaned = -0.000208467 Jy
! Component: 3400  -  total flux cleaned = -0.00024243 Jy
! Component: 3450  -  total flux cleaned = -0.00024252 Jy
! Component: 3500  -  total flux cleaned = -0.000292742 Jy
! Component: 3550  -  total flux cleaned = -0.000292832 Jy
! Component: 3600  -  total flux cleaned = -0.000334289 Jy
! Component: 3650  -  total flux cleaned = -0.00036724 Jy
! Component: 3700  -  total flux cleaned = -0.000375428 Jy
! Component: 3750  -  total flux cleaned = -0.000408 Jy
! Component: 3800  -  total flux cleaned = -0.000367611 Jy
! Component: 3850  -  total flux cleaned = -0.000424021 Jy
! Component: 3900  -  total flux cleaned = -0.000432105 Jy
! Component: 3950  -  total flux cleaned = -0.000479922 Jy
! Component: 4000  -  total flux cleaned = -0.000511668 Jy
! Component: 4050  -  total flux cleaned = -0.000519545 Jy
! Total flux subtracted in 4096 components = -0.000535225 Jy
! Clean residual min=-0.000455 max=0.000491 Jy/beam
! Clean residual mean=-0.000000 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.203123 Jy
keep
! Adding 316 model components to the UV plane model.
! The established model now contains 376 components and 0.203123 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J0445+0715_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.408 x 10.31 at -12.28 degrees (North through East)
! Clean map  min=-0.00075277  max=0.19473 Jy/beam
! Writing clean map to FITS file: J0445+0715_S_map.fits
wmodel J0445+0715_S_map.mod
! Writing 376 model components to file: J0445+0715_S_map.mod
wobs   J0445+0715_S_uvs.fits
! Writing UV FITS file: J0445+0715_S_uvs.fits
wwins  J0445+0715_S_map.win
! wwins: Wrote 2 windows to J0445+0715_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.194734 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000154247 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.237628 0.237628 0.475255 0.950511 1.90102 3.80204 7.60409 15.2082 30.4163 60.8327
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.194 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1262.48 
quit
! Quitting program
! Log file J0445+0715_S_dfm.log closed on Fri Feb 15 19:44:25 2019