! Started logfile: /vlbi/bp222/temp_maps//J0357-0751_X_dfm.log on Thu Feb 14 22:29:27 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/bp222/temp_maps//J0357-0751_X_uvm.fits
! Reading UV FITS file: /vlbi/bp222/temp_maps//J0357-0751_X_uvm.fits
! AN table 1: 119 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.944725 visibilities/baseline/integration-bin.
! Found source: J0357-0751
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 60708 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0357-0751_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007992Jy  sigma=14.141759
! Fit after  self-cal, rms=0.884008Jy  sigma=12.367089
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6461 mas, bmaj=1.679 mas, bpa=-1.813 degrees
! Estimated noise=0.404652 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0865966 Jy
! Component: 100  -  total flux cleaned = 0.109179 Jy
! Total flux subtracted in 100 components = 0.109179 Jy
! Clean residual min=-0.005042 max=0.009577 Jy/beam
! Clean residual mean=-0.000001 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.109179 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.109179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063147Jy  sigma=0.814149
! Fit after  self-cal, rms=0.063105Jy  sigma=0.813749
! Inverting map 
! Added new window around map position (-0.2, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011069 Jy
! Component: 100  -  total flux cleaned = 0.0176432 Jy
! Total flux subtracted in 100 components = 0.0176432 Jy
! Clean residual min=-0.004950 max=0.005386 Jy/beam
! Clean residual mean=-0.000000 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.126822 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 26 components and 0.126822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060340Jy  sigma=0.768370
! Fit after  self-cal, rms=0.060255Jy  sigma=0.767166
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00494816 Jy
! Component: 100  -  total flux cleaned = 0.00828848 Jy
! Total flux subtracted in 100 components = 0.00828848 Jy
! Clean residual min=-0.004189 max=0.003956 Jy/beam
! Clean residual mean=0.000000 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.13511 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 35 components and 0.13511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059642Jy  sigma=0.757602
! Fit after  self-cal, rms=0.059616Jy  sigma=0.757199
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.865 mas, bmaj=2.065 mas, bpa=-1.471 degrees
! Estimated noise=0.21635 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00540989 Jy
! Component: 100  -  total flux cleaned = 0.00752146 Jy
! Component: 150  -  total flux cleaned = 0.00855359 Jy
! Component: 200  -  total flux cleaned = 0.00941949 Jy
! Total flux subtracted in 200 components = 0.00941949 Jy
! Clean residual min=-0.003885 max=0.003221 Jy/beam
! Clean residual mean=0.000001 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.14453 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 55 components and 0.14453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059041Jy  sigma=0.748168
! Fit after  self-cal, rms=0.059015Jy  sigma=0.747708
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.865 x 2.065 at -1.471 degrees (North through East)
! Clean map  min=-0.0037434  max=0.11554 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.85     KP        1.04     
!   LA        1.01     MK        1.02     NL        1.14     OV        0.91     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.89     KP        1.03     
!   LA        1.01     MK        1.02     NL        1.09     OV        0.94     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.87     KP        1.05     
!   LA        1.01     MK        1.03     NL        1.12     OV        0.91     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.86     KP        1.06     
!   LA        1.00     MK        1.02     NL        1.11     OV        0.91     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.88     KP        1.06     
!   LA        1.02     MK        1.00     NL        1.08     OV        0.92     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.83     KP        1.05     
!   LA        1.01     MK        1.04     NL        1.10     OV        0.92     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.86     KP        1.05     
!   LA        1.04     MK        1.05     NL        1.10     OV        0.92     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.86     KP        1.07     
!   LA        1.00     MK        1.02     NL        1.11     OV        0.92     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 9.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.85     KP        1.05     
!   LA        1.00     MK        1.03     NL        1.10     OV        0.93     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 10.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.87     KP        1.06     
!   LA        1.02     MK        1.04     NL        1.10     OV        0.91     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 11.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.88     KP        1.06     
!   LA        1.01     MK        1.01     NL        1.11     OV        0.93     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 12.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.88     KP        1.06     
!   LA        1.02     MK        1.03     NL        1.08     OV        0.94     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.059015Jy  sigma=0.747708
! Fit after  self-cal, rms=0.055890Jy  sigma=0.731299
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8654 mas, bmaj=2.079 mas, bpa=-1.56 degrees
! Estimated noise=0.214926 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104416 Jy
! Component: 100  -  total flux cleaned = 0.00123795 Jy
! Component: 150  -  total flux cleaned = 0.00141436 Jy
! Component: 200  -  total flux cleaned = 0.00161345 Jy
! Total flux subtracted in 200 components = 0.00161345 Jy
! Clean residual min=-0.001196 max=0.001190 Jy/beam
! Clean residual mean=0.000000 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.146143 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 79 components and 0.146143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055834Jy  sigma=0.730511
! Fit after  self-cal, rms=0.055852Jy  sigma=0.730193
! Inverting map 
! Added new window around map position (-3.2, -17.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000881988 Jy
! Component: 100  -  total flux cleaned = 0.000910027 Jy
! Component: 150  -  total flux cleaned = 0.000984922 Jy
! Component: 200  -  total flux cleaned = 0.00103036 Jy
! Total flux subtracted in 200 components = 0.00103036 Jy
! Clean residual min=-0.001169 max=0.001054 Jy/beam
! Clean residual mean=0.000000 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.147174 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 90 components and 0.147174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055816Jy  sigma=0.729720
! Fit after  self-cal, rms=0.055815Jy  sigma=0.729670
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055815Jy  sigma=0.729670
! Fit after  self-cal, rms=0.055612Jy  sigma=0.726012
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8652 mas, bmaj=2.08 mas, bpa=-1.556 degrees
! Estimated noise=0.21548 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000395324 Jy
! Component: 100  -  total flux cleaned = 0.000398507 Jy
! Component: 150  -  total flux cleaned = 0.000440434 Jy
! Component: 200  -  total flux cleaned = 0.000458848 Jy
! Total flux subtracted in 200 components = 0.000458848 Jy
! Clean residual min=-0.000771 max=0.000831 Jy/beam
! Clean residual mean=0.000000 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.147633 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 111 components and 0.147633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055594Jy  sigma=0.725705
! Fit after  self-cal, rms=0.055593Jy  sigma=0.725660
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000811369 Jy
! Component: 100  -  total flux cleaned = 0.00098353 Jy
! Component: 150  -  total flux cleaned = 0.00105744 Jy
! Component: 200  -  total flux cleaned = 0.00109176 Jy
! Total flux subtracted in 200 components = 0.00109176 Jy
! Clean residual min=-0.000712 max=0.000801 Jy/beam
! Clean residual mean=0.000000 rms=0.000177 Jy/beam
! Combined flux in latest and established models = 0.148724 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 131 components and 0.148724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055577Jy  sigma=0.725414
! Fit after  self-cal, rms=0.055577Jy  sigma=0.725406
! Inverting map 
! Added new window around map position (5.4, 18.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000747391 Jy
! Component: 100  -  total flux cleaned = 0.00112117 Jy
! Component: 150  -  total flux cleaned = 0.00132716 Jy
! Component: 200  -  total flux cleaned = 0.00142265 Jy
! Total flux subtracted in 200 components = 0.00142265 Jy
! Clean residual min=-0.000665 max=0.000662 Jy/beam
! Clean residual mean=0.000000 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.150147 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 159 components and 0.150147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055564Jy  sigma=0.725183
! Fit after  self-cal, rms=0.055563Jy  sigma=0.725178
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055563Jy  sigma=0.725178
! Fit after  self-cal, rms=0.055551Jy  sigma=0.723577
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8647 mas, bmaj=2.079 mas, bpa=-1.556 degrees
! Estimated noise=0.215415 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000395255 Jy
! Component: 100  -  total flux cleaned = 0.000496459 Jy
! Component: 150  -  total flux cleaned = 0.000511425 Jy
! Component: 200  -  total flux cleaned = 0.000539591 Jy
! Total flux subtracted in 200 components = 0.000539591 Jy
! Clean residual min=-0.000634 max=0.000677 Jy/beam
! Clean residual mean=-0.000000 rms=0.000150 Jy/beam
! Combined flux in latest and established models = 0.150687 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 175 components and 0.150687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055542Jy  sigma=0.723447
! Fit after  self-cal, rms=0.055551Jy  sigma=0.723424
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (15.4, -30.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000314255 Jy
! Component: 100  -  total flux cleaned = 0.000377129 Jy
! Component: 150  -  total flux cleaned = 0.000447173 Jy
! Component: 200  -  total flux cleaned = 0.000511268 Jy
! Total flux subtracted in 200 components = 0.000511268 Jy
! Clean residual min=-0.000608 max=0.000558 Jy/beam
! Clean residual mean=-0.000000 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.151198 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 190 components and 0.151198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055542Jy  sigma=0.723291
! Fit after  self-cal, rms=0.055541Jy  sigma=0.723287
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055541Jy  sigma=0.723287
! Fit after  self-cal, rms=0.055558Jy  sigma=0.723269
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.127 mas, bmaj=3.765 mas, bpa=1.488 degrees
! Estimated noise=0.269358 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000414467 Jy
! Component: 100  -  total flux cleaned = 0.00064173 Jy
! Component: 150  -  total flux cleaned = 0.000780766 Jy
! Component: 200  -  total flux cleaned = 0.000904245 Jy
! Total flux subtracted in 200 components = 0.000904245 Jy
! Clean residual min=-0.000634 max=0.000521 Jy/beam
! Clean residual mean=-0.000000 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.152102 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 213 components and 0.152102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055555Jy  sigma=0.723223
! Fit after  self-cal, rms=0.055555Jy  sigma=0.723219
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.84763e-05 Jy
! Component: 100  -  total flux cleaned = 0.000139492 Jy
! Component: 150  -  total flux cleaned = 0.000203779 Jy
! Component: 200  -  total flux cleaned = 0.00027093 Jy
! Total flux subtracted in 200 components = 0.00027093 Jy
! Clean residual min=-0.000632 max=0.000521 Jy/beam
! Clean residual mean=-0.000000 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.152373 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 225 components and 0.152373 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055554Jy  sigma=0.723199
! Fit after  self-cal, rms=0.055553Jy  sigma=0.723197
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8644 mas, bmaj=2.079 mas, bpa=-1.572 degrees
! Estimated noise=0.215488 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8644 x 2.079 at -1.572 degrees (North through East)
! Clean map  min=-0.00076425  max=0.11447 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.647 mas, bmaj=1.694 mas, bpa=-1.963 degrees
! Estimated noise=0.403241 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0860405 Jy
! Component: 100  -  total flux cleaned = 0.108243 Jy
! Component: 150  -  total flux cleaned = 0.119205 Jy
! Component: 200  -  total flux cleaned = 0.125639 Jy
! Total flux subtracted in 200 components = 0.125639 Jy
! Clean residual min=-0.001853 max=0.003329 Jy/beam
! Clean residual mean=-0.000001 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.125639 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.125639 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8644 mas, bmaj=2.079 mas, bpa=-1.572 degrees
! Estimated noise=0.215488 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00755897 Jy
! Component: 100  -  total flux cleaned = 0.0120305 Jy
! Component: 150  -  total flux cleaned = 0.0150319 Jy
! Component: 200  -  total flux cleaned = 0.0171606 Jy
! Total flux subtracted in 200 components = 0.0171606 Jy
! Clean residual min=-0.000977 max=0.001244 Jy/beam
! Clean residual mean=0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.1428 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 67 components and 0.1428 Jy
! Inverting map 
! Added new window around map position (-0.2, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157835 Jy
! Component: 100  -  total flux cleaned = 0.00280873 Jy
! Component: 150  -  total flux cleaned = 0.00383274 Jy
! Component: 200  -  total flux cleaned = 0.00471581 Jy
! Total flux subtracted in 200 components = 0.00471581 Jy
! Clean residual min=-0.000749 max=0.000703 Jy/beam
! Clean residual mean=0.000000 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.147516 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 92 components and 0.147516 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.127 mas, bmaj=3.765 mas, bpa=1.488 degrees
! Estimated noise=0.269358 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106859 Jy
! Component: 100  -  total flux cleaned = 0.00183249 Jy
! Component: 150  -  total flux cleaned = 0.00242612 Jy
! Component: 200  -  total flux cleaned = 0.00290864 Jy
! Total flux subtracted in 200 components = 0.00290864 Jy
! Clean residual min=-0.000716 max=0.000543 Jy/beam
! Clean residual mean=-0.000000 rms=0.000171 Jy/beam
! Combined flux in latest and established models = 0.150424 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000404355 Jy
! Component: 100  -  total flux cleaned = 0.000748741 Jy
! Component: 150  -  total flux cleaned = 0.000989504 Jy
! Component: 200  -  total flux cleaned = 0.00120519 Jy
! Total flux subtracted in 200 components = 0.00120519 Jy
! Clean residual min=-0.000677 max=0.000523 Jy/beam
! Clean residual mean=-0.000000 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.151629 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 145 components and 0.151629 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8644 mas, bmaj=2.079 mas, bpa=-1.572 degrees
! Estimated noise=0.215488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000367681 Jy
! Component: 100  -  total flux cleaned = -0.000415488 Jy
! Component: 150  -  total flux cleaned = -0.000393495 Jy
! Component: 200  -  total flux cleaned = -0.000393435 Jy
! Total flux subtracted in 200 components = -0.000393435 Jy
! Clean residual min=-0.000634 max=0.000541 Jy/beam
! Clean residual mean=-0.000000 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.151236 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 163 components and 0.151236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055580Jy  sigma=0.723441
! Fit after  self-cal, rms=0.055572Jy  sigma=0.723388
wmodel J0357-0751_X_map.mod
! Writing 163 model components to file: J0357-0751_X_map.mod
wobs   J0357-0751_X_uvs.fits
! Writing UV FITS file: J0357-0751_X_uvs.fits
wwins  J0357-0751_X_map.win
! wwins: Wrote 8 windows to J0357-0751_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000287963 Jy
! Component: 100  -  total flux cleaned = -0.000501976 Jy
! Component: 150  -  total flux cleaned = -0.000677289 Jy
! Component: 200  -  total flux cleaned = -0.000807243 Jy
! Component: 250  -  total flux cleaned = -0.000934619 Jy
! Component: 300  -  total flux cleaned = -0.00103096 Jy
! Component: 350  -  total flux cleaned = -0.00112579 Jy
! Component: 400  -  total flux cleaned = -0.00122856 Jy
! Component: 450  -  total flux cleaned = -0.00128394 Jy
! Component: 500  -  total flux cleaned = -0.00137487 Jy
! Component: 550  -  total flux cleaned = -0.00141977 Jy
! Component: 600  -  total flux cleaned = -0.00149082 Jy
! Component: 650  -  total flux cleaned = -0.00157861 Jy
! Component: 700  -  total flux cleaned = -0.00162187 Jy
! Component: 750  -  total flux cleaned = -0.00166489 Jy
! Component: 800  -  total flux cleaned = -0.0017585 Jy
! Component: 850  -  total flux cleaned = -0.00181732 Jy
! Component: 900  -  total flux cleaned = -0.00185896 Jy
! Component: 950  -  total flux cleaned = -0.00190025 Jy
! Component: 1000  -  total flux cleaned = -0.00193305 Jy
! Component: 1050  -  total flux cleaned = -0.00198183 Jy
! Component: 1100  -  total flux cleaned = -0.00202189 Jy
! Component: 1150  -  total flux cleaned = -0.00204582 Jy
! Component: 1200  -  total flux cleaned = -0.00210889 Jy
! Component: 1250  -  total flux cleaned = -0.0021245 Jy
! Component: 1300  -  total flux cleaned = -0.00217114 Jy
! Component: 1350  -  total flux cleaned = -0.00219418 Jy
! Component: 1400  -  total flux cleaned = -0.00224004 Jy
! Component: 1450  -  total flux cleaned = -0.00227043 Jy
! Component: 1500  -  total flux cleaned = -0.00229312 Jy
! Component: 1550  -  total flux cleaned = -0.00233805 Jy
! Component: 1600  -  total flux cleaned = -0.00236784 Jy
! Component: 1650  -  total flux cleaned = -0.00240473 Jy
! Component: 1700  -  total flux cleaned = -0.00244142 Jy
! Component: 1750  -  total flux cleaned = -0.0025144 Jy
! Component: 1800  -  total flux cleaned = -0.00249263 Jy
! Component: 1850  -  total flux cleaned = -0.00252872 Jy
! Component: 1900  -  total flux cleaned = -0.00257891 Jy
! Component: 1950  -  total flux cleaned = -0.0026287 Jy
! Component: 2000  -  total flux cleaned = -0.00265705 Jy
! Component: 2050  -  total flux cleaned = -0.0026783 Jy
! Component: 2100  -  total flux cleaned = -0.00271327 Jy
! Component: 2150  -  total flux cleaned = -0.0027481 Jy
! Component: 2200  -  total flux cleaned = -0.00275506 Jy
! Component: 2250  -  total flux cleaned = -0.00278266 Jy
! Component: 2300  -  total flux cleaned = -0.00277579 Jy
! Component: 2350  -  total flux cleaned = -0.00278952 Jy
! Component: 2400  -  total flux cleaned = -0.00278952 Jy
! Component: 2450  -  total flux cleaned = -0.0028301 Jy
! Component: 2500  -  total flux cleaned = -0.00284354 Jy
! Component: 2550  -  total flux cleaned = -0.0028502 Jy
! Component: 2600  -  total flux cleaned = -0.00285691 Jy
! Component: 2650  -  total flux cleaned = -0.00287682 Jy
! Component: 2700  -  total flux cleaned = -0.0028702 Jy
! Component: 2750  -  total flux cleaned = -0.00287675 Jy
! Component: 2800  -  total flux cleaned = -0.00288332 Jy
! Component: 2850  -  total flux cleaned = -0.00291585 Jy
! Component: 2900  -  total flux cleaned = -0.00291581 Jy
! Component: 2950  -  total flux cleaned = -0.00294159 Jy
! Component: 3000  -  total flux cleaned = -0.00294799 Jy
! Component: 3050  -  total flux cleaned = -0.00294162 Jy
! Component: 3100  -  total flux cleaned = -0.00295429 Jy
! Component: 3150  -  total flux cleaned = -0.00294165 Jy
! Component: 3200  -  total flux cleaned = -0.00294168 Jy
! Component: 3250  -  total flux cleaned = -0.0029542 Jy
! Component: 3300  -  total flux cleaned = -0.00296043 Jy
! Component: 3350  -  total flux cleaned = -0.00297289 Jy
! Component: 3400  -  total flux cleaned = -0.00298529 Jy
! Component: 3450  -  total flux cleaned = -0.00296672 Jy
! Component: 3500  -  total flux cleaned = -0.00296672 Jy
! Component: 3550  -  total flux cleaned = -0.0029851 Jy
! Component: 3600  -  total flux cleaned = -0.00300952 Jy
! Component: 3650  -  total flux cleaned = -0.00300341 Jy
! Component: 3700  -  total flux cleaned = -0.00299739 Jy
! Component: 3750  -  total flux cleaned = -0.00299132 Jy
! Component: 3800  -  total flux cleaned = -0.00298531 Jy
! Component: 3850  -  total flux cleaned = -0.00299726 Jy
! Component: 3900  -  total flux cleaned = -0.00302111 Jy
! Component: 3950  -  total flux cleaned = -0.00300326 Jy
! Component: 4000  -  total flux cleaned = -0.0030151 Jy
! Component: 4050  -  total flux cleaned = -0.0030505 Jy
! Total flux subtracted in 4096 components = -0.00303286 Jy
! Clean residual min=-0.000331 max=0.000415 Jy/beam
! Clean residual mean=0.000000 rms=0.000104 Jy/beam
! Combined flux in latest and established models = 0.148203 Jy
keep
! Adding 322 model components to the UV plane model.
! The established model now contains 485 components and 0.148203 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/bp222/temp_maps//J0357-0751_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8644 x 2.079 at -1.572 degrees (North through East)
! Clean map  min=-0.00053423  max=0.11442 Jy/beam
! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0357-0751_X_map.fits
wmodel /vlbi/bp222/temp_maps//J0357-0751_X_map.mod
! Writing 485 model components to file: /vlbi/bp222/temp_maps//J0357-0751_X_map.mod
wobs   /vlbi/bp222/temp_maps//J0357-0751_X_uvs.fits
! Writing UV FITS file: /vlbi/bp222/temp_maps//J0357-0751_X_uvs.fits
wwins  /vlbi/bp222/temp_maps//J0357-0751_X_map.win
! wwins: Wrote 9 windows to /vlbi/bp222/temp_maps//J0357-0751_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.114418 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000103374 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.271043 0.271043 0.542086 1.08417 2.16835 4.33669 8.67338 17.3468 34.6935 69.3871
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.114 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1106.83 
quit
! Quitting program
! Log file /vlbi/bp222/temp_maps//J0357-0751_X_dfm.log closed on Thu Feb 14 22:29:34 2019