! Started logfile: /vlbi/bp222/temp_maps//J0331-1051_X_dfm.log on Thu Feb 14 22:28:18 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0331-1051_X_uva.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0331-1051_X_uva.fits ! AN table 1: 119 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.946779 visibilities/baseline/integration-bin. ! Found source: J0331-1051 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 60840 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0331-1051_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004594Jy sigma=14.469766 ! Fit after self-cal, rms=0.950013Jy sigma=13.637732 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6044 mas, bmaj=1.673 mas, bpa=-3.507 degrees ! Estimated noise=0.420003 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0323897 Jy ! Component: 100 - total flux cleaned = 0.0455326 Jy ! Total flux subtracted in 100 components = 0.0455326 Jy ! Clean residual min=-0.003902 max=0.011216 Jy/beam ! Clean residual mean=0.000002 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.0455326 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0455326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071016Jy sigma=0.980153 ! Fit after self-cal, rms=0.069605Jy sigma=0.963118 ! Inverting map ! Added new window around map position (-3.6, 6.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134628 Jy ! Component: 100 - total flux cleaned = 0.0225409 Jy ! Total flux subtracted in 100 components = 0.0225409 Jy ! Clean residual min=-0.003642 max=0.007456 Jy/beam ! Clean residual mean=0.000002 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.0680735 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.0680735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064723Jy sigma=0.883373 ! Fit after self-cal, rms=0.064085Jy sigma=0.876672 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00945032 Jy ! Component: 100 - total flux cleaned = 0.0160239 Jy ! Total flux subtracted in 100 components = 0.0160239 Jy ! Clean residual min=-0.002987 max=0.007708 Jy/beam ! Clean residual mean=0.000001 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.0840974 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.0840973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061344Jy sigma=0.831724 ! Fit after self-cal, rms=0.061078Jy sigma=0.829262 ! Inverting map ! Added new window around map position (-2.2, 5.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0083409 Jy ! Component: 100 - total flux cleaned = 0.013929 Jy ! Total flux subtracted in 100 components = 0.013929 Jy ! Clean residual min=-0.002988 max=0.006617 Jy/beam ! Clean residual mean=0.000000 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0980263 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.0980263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059028Jy sigma=0.795170 ! Fit after self-cal, rms=0.058786Jy sigma=0.792827 ! Inverting map ! Added new window around map position (-0.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00701225 Jy ! Component: 100 - total flux cleaned = 0.011692 Jy ! Total flux subtracted in 100 components = 0.011692 Jy ! Clean residual min=-0.002577 max=0.004751 Jy/beam ! Clean residual mean=0.000000 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.109718 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.109718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057350Jy sigma=0.769299 ! Fit after self-cal, rms=0.057210Jy sigma=0.767894 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00492689 Jy ! Component: 100 - total flux cleaned = 0.00838759 Jy ! Total flux subtracted in 100 components = 0.00838759 Jy ! Clean residual min=-0.002325 max=0.003849 Jy/beam ! Clean residual mean=0.000000 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.118106 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.118106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056444Jy sigma=0.755161 ! Fit after self-cal, rms=0.056382Jy sigma=0.754531 ! Inverting map ! Added new window around map position (0.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393156 Jy ! Component: 100 - total flux cleaned = 0.00689796 Jy ! Total flux subtracted in 100 components = 0.00689796 Jy ! Clean residual min=-0.002105 max=0.002420 Jy/beam ! Clean residual mean=-0.000000 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.125004 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.125004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055902Jy sigma=0.746598 ! Fit after self-cal, rms=0.055879Jy sigma=0.746332 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8013 mas, bmaj=2.021 mas, bpa=-2.973 degrees ! Estimated noise=0.208864 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526793 Jy ! Component: 100 - total flux cleaned = 0.00920619 Jy ! Component: 150 - total flux cleaned = 0.0124022 Jy ! Component: 200 - total flux cleaned = 0.0150576 Jy ! Total flux subtracted in 200 components = 0.0150576 Jy ! Clean residual min=-0.002133 max=0.002724 Jy/beam ! Clean residual mean=-0.000003 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.140061 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 100 components and 0.140061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055181Jy sigma=0.734605 ! Fit after self-cal, rms=0.055122Jy sigma=0.734016 ! Inverting map ! Added new window around map position (6.2, -8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305614 Jy ! Component: 100 - total flux cleaned = 0.00524612 Jy ! Component: 150 - total flux cleaned = 0.00704502 Jy ! Component: 200 - total flux cleaned = 0.0085427 Jy ! Total flux subtracted in 200 components = 0.0085427 Jy ! Clean residual min=-0.001576 max=0.002112 Jy/beam ! Clean residual mean=-0.000002 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.148604 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 133 components and 0.148604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054892Jy sigma=0.730206 ! Fit after self-cal, rms=0.054876Jy sigma=0.729838 ! Inverting map ! Added new window around map position (-9.6, 17.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205476 Jy ! Component: 100 - total flux cleaned = 0.00341287 Jy ! Component: 150 - total flux cleaned = 0.0044894 Jy ! Component: 200 - total flux cleaned = 0.00514452 Jy ! Total flux subtracted in 200 components = 0.00514452 Jy ! Clean residual min=-0.001665 max=0.001505 Jy/beam ! Clean residual mean=-0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.153749 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 161 components and 0.153749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054780Jy sigma=0.728287 ! Fit after self-cal, rms=0.054777Jy sigma=0.728140 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8013 x 2.021 at -2.973 degrees (North through East) ! Clean map min=-0.0016085 max=0.048694 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 0.93 KP 0.98 ! LA 0.98 MK 1.01 NL 1.08 OV 0.97 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 0.96 KP 1.01 ! LA 0.99 MK 0.99 NL 1.09 OV 0.94 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.91 HN 0.90 KP 1.04 ! LA 0.98 MK 1.01 NL 1.09 OV 0.99 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 0.97 KP 1.00 ! LA 0.99 MK 1.01 NL 1.09 OV 0.96 ! PT 0.98 SC 0.90 ! ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.93 HN 0.91 KP 1.02 ! LA 0.98 MK 0.97 NL 1.10 OV 0.94 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.94 HN 0.93 KP 1.01 ! LA 1.00 MK 1.05 NL 1.12 OV 0.97 ! PT 0.99 SC 0.92 ! ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.94 HN 0.92 KP 1.01 ! LA 0.99 MK 1.01 NL 1.09 OV 0.96 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 0.94 KP 1.04 ! LA 0.97 MK 1.00 NL 1.08 OV 0.98 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 0.93 KP 1.02 ! LA 0.99 MK 1.03 NL 1.11 OV 0.97 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.90 KP 1.04 ! LA 0.98 MK 1.04 NL 1.09 OV 0.98 ! PT 1.01 SC 0.87 ! ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 0.87 KP 1.01 ! LA 1.01 MK 0.89 NL 1.12 OV 0.96 ! PT 0.99 SC 0.92 ! ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 0.90 KP 1.07 ! LA 1.00 MK 0.87 NL 1.08 OV 0.98 ! PT 0.96 SC 0.92 ! ! ! Fit before self-cal, rms=0.054777Jy sigma=0.728140 ! Fit after self-cal, rms=0.052023Jy sigma=0.724993 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7987 mas, bmaj=2.017 mas, bpa=-2.709 degrees ! Estimated noise=0.203173 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.8, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000719436 Jy ! Component: 100 - total flux cleaned = 0.00109705 Jy ! Component: 150 - total flux cleaned = 0.00113155 Jy ! Component: 200 - total flux cleaned = 0.00116375 Jy ! Total flux subtracted in 200 components = 0.00116375 Jy ! Clean residual min=-0.001314 max=0.000905 Jy/beam ! Clean residual mean=-0.000000 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.154912 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 180 components and 0.154912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051959Jy sigma=0.724140 ! Fit after self-cal, rms=0.051951Jy sigma=0.723995 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051951Jy sigma=0.723995 ! Fit after self-cal, rms=0.051197Jy sigma=0.723244 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.797 mas, bmaj=2.009 mas, bpa=-2.582 degrees ! Estimated noise=0.201009 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000480221 Jy ! Component: 100 - total flux cleaned = 0.000645232 Jy ! Component: 150 - total flux cleaned = 0.000732053 Jy ! Component: 200 - total flux cleaned = 0.00075714 Jy ! Total flux subtracted in 200 components = 0.00075714 Jy ! Clean residual min=-0.001139 max=0.000843 Jy/beam ! Clean residual mean=-0.000000 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.15567 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 193 components and 0.15567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051160Jy sigma=0.722769 ! Fit after self-cal, rms=0.051158Jy sigma=0.722700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.39408e-05 Jy ! Component: 100 - total flux cleaned = 3.07977e-05 Jy ! Component: 150 - total flux cleaned = -1.14284e-05 Jy ! Component: 200 - total flux cleaned = -3.07823e-05 Jy ! Total flux subtracted in 200 components = -3.07823e-05 Jy ! Clean residual min=-0.001154 max=0.000815 Jy/beam ! Clean residual mean=-0.000000 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.155639 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 205 components and 0.155639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051140Jy sigma=0.722466 ! Fit after self-cal, rms=0.051138Jy sigma=0.722454 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051138Jy sigma=0.722454 ! Fit after self-cal, rms=0.050932Jy sigma=0.720811 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7953 mas, bmaj=2.004 mas, bpa=-2.342 degrees ! Estimated noise=0.199006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239242 Jy ! Component: 100 - total flux cleaned = 0.000349651 Jy ! Component: 150 - total flux cleaned = 0.000369528 Jy ! Component: 200 - total flux cleaned = 0.000369815 Jy ! Total flux subtracted in 200 components = 0.000369815 Jy ! Clean residual min=-0.000910 max=0.000753 Jy/beam ! Clean residual mean=-0.000000 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.156009 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 215 components and 0.156009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050914Jy sigma=0.720592 ! Fit after self-cal, rms=0.050941Jy sigma=0.720506 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.49746e-07 Jy ! Component: 100 - total flux cleaned = -1.54718e-05 Jy ! Component: 150 - total flux cleaned = -1.53955e-05 Jy ! Component: 200 - total flux cleaned = -1.58169e-05 Jy ! Total flux subtracted in 200 components = -1.58169e-05 Jy ! Clean residual min=-0.000898 max=0.000745 Jy/beam ! Clean residual mean=-0.000000 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.155993 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 220 components and 0.155993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050931Jy sigma=0.720378 ! Fit after self-cal, rms=0.050930Jy sigma=0.720371 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050930Jy sigma=0.720371 ! Fit after self-cal, rms=0.050564Jy sigma=0.720308 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.118 mas, bmaj=3.858 mas, bpa=2.572 degrees ! Estimated noise=0.263427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152277 Jy ! Component: 100 - total flux cleaned = 0.000204125 Jy ! Component: 150 - total flux cleaned = 0.000163575 Jy ! Component: 200 - total flux cleaned = 0.000129357 Jy ! Total flux subtracted in 200 components = 0.000129357 Jy ! Clean residual min=-0.000726 max=0.000689 Jy/beam ! Clean residual mean=-0.000000 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.156122 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 230 components and 0.156122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050561Jy sigma=0.720270 ! Fit after self-cal, rms=0.050563Jy sigma=0.720246 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.33504e-05 Jy ! Component: 100 - total flux cleaned = -4.30217e-05 Jy ! Component: 150 - total flux cleaned = -3.47484e-05 Jy ! Component: 200 - total flux cleaned = -1.11074e-05 Jy ! Total flux subtracted in 200 components = -1.11074e-05 Jy ! Clean residual min=-0.000713 max=0.000718 Jy/beam ! Clean residual mean=-0.000000 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.156111 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 247 components and 0.156111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050562Jy sigma=0.720233 ! Fit after self-cal, rms=0.050562Jy sigma=0.720230 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7939 mas, bmaj=2.002 mas, bpa=-2.213 degrees ! Estimated noise=0.197661 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7939 x 2.002 at -2.213 degrees (North through East) ! Clean map min=-0.00083157 max=0.046593 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5987 mas, bmaj=1.662 mas, bpa=-2.754 degrees ! Estimated noise=0.392998 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322965 Jy ! Component: 100 - total flux cleaned = 0.0513637 Jy ! Component: 150 - total flux cleaned = 0.0653008 Jy ! Component: 200 - total flux cleaned = 0.0763992 Jy ! Total flux subtracted in 200 components = 0.0763992 Jy ! Clean residual min=-0.004041 max=0.006680 Jy/beam ! Clean residual mean=0.000001 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.0763992 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0763992 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7939 mas, bmaj=2.002 mas, bpa=-2.213 degrees ! Estimated noise=0.197661 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166676 Jy ! Component: 100 - total flux cleaned = 0.0287243 Jy ! Component: 150 - total flux cleaned = 0.0379306 Jy ! Component: 200 - total flux cleaned = 0.0451035 Jy ! Total flux subtracted in 200 components = 0.0451035 Jy ! Clean residual min=-0.002088 max=0.004238 Jy/beam ! Clean residual mean=-0.000003 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.121503 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 55 components and 0.121503 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0056319 Jy ! Component: 100 - total flux cleaned = 0.010112 Jy ! Component: 150 - total flux cleaned = 0.0137677 Jy ! Component: 200 - total flux cleaned = 0.0168072 Jy ! Total flux subtracted in 200 components = 0.0168072 Jy ! Clean residual min=-0.001311 max=0.001851 Jy/beam ! Clean residual mean=-0.000002 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.13831 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 102 components and 0.13831 Jy ! Inverting map ! Added new window around map position (-8.4, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025539 Jy ! Component: 100 - total flux cleaned = 0.00471818 Jy ! Component: 150 - total flux cleaned = 0.00656388 Jy ! Component: 200 - total flux cleaned = 0.00814551 Jy ! Total flux subtracted in 200 components = 0.00814551 Jy ! Clean residual min=-0.000946 max=0.001216 Jy/beam ! Clean residual mean=-0.000001 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.146455 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 162 components and 0.146455 Jy ! Inverting map ! Added new window around map position (-1.8, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143029 Jy ! Component: 100 - total flux cleaned = 0.0026439 Jy ! Component: 150 - total flux cleaned = 0.00370329 Jy ! Component: 200 - total flux cleaned = 0.0046296 Jy ! Total flux subtracted in 200 components = 0.0046296 Jy ! Clean residual min=-0.000738 max=0.000768 Jy/beam ! Clean residual mean=-0.000001 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.151085 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 206 components and 0.151085 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.118 mas, bmaj=3.858 mas, bpa=2.572 degrees ! Estimated noise=0.263427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015264 Jy ! Component: 100 - total flux cleaned = 0.00261007 Jy ! Component: 150 - total flux cleaned = 0.00342462 Jy ! Component: 200 - total flux cleaned = 0.00402531 Jy ! Total flux subtracted in 200 components = 0.00402531 Jy ! Clean residual min=-0.000773 max=0.000827 Jy/beam ! Clean residual mean=-0.000000 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.15511 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283475 Jy ! Component: 100 - total flux cleaned = 0.000459098 Jy ! Component: 150 - total flux cleaned = 0.000599332 Jy ! Component: 200 - total flux cleaned = 0.000697936 Jy ! Total flux subtracted in 200 components = 0.000697936 Jy ! Clean residual min=-0.000743 max=0.000756 Jy/beam ! Clean residual mean=-0.000000 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.155808 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 264 components and 0.155808 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7939 mas, bmaj=2.002 mas, bpa=-2.213 degrees ! Estimated noise=0.197661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.97075e-05 Jy ! Component: 100 - total flux cleaned = 6.19977e-05 Jy ! Component: 150 - total flux cleaned = 0.000165347 Jy ! Component: 200 - total flux cleaned = 0.000232339 Jy ! Total flux subtracted in 200 components = 0.000232339 Jy ! Clean residual min=-0.000656 max=0.000602 Jy/beam ! Clean residual mean=-0.000000 rms=0.000148 Jy/beam ! Combined flux in latest and established models = 0.156041 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 291 components and 0.156041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050546Jy sigma=0.719957 ! Fit after self-cal, rms=0.050514Jy sigma=0.719632 wmodel J0331-1051_X_map.mod ! Writing 291 model components to file: J0331-1051_X_map.mod wobs J0331-1051_X_uvs.fits ! Writing UV FITS file: J0331-1051_X_uvs.fits wwins J0331-1051_X_map.win ! wwins: Wrote 11 windows to J0331-1051_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203938 Jy ! Component: 100 - total flux cleaned = -0.000337722 Jy ! Component: 150 - total flux cleaned = -0.000401417 Jy ! Component: 200 - total flux cleaned = -0.000493769 Jy ! Component: 250 - total flux cleaned = -0.000553644 Jy ! Component: 300 - total flux cleaned = -0.00059281 Jy ! Component: 350 - total flux cleaned = -0.000592961 Jy ! Component: 400 - total flux cleaned = -0.000602466 Jy ! Component: 450 - total flux cleaned = -0.000593039 Jy ! Component: 500 - total flux cleaned = -0.000574711 Jy ! Component: 550 - total flux cleaned = -0.000574656 Jy ! Component: 600 - total flux cleaned = -0.000539086 Jy ! Component: 650 - total flux cleaned = -0.000547885 Jy ! Component: 700 - total flux cleaned = -0.00054795 Jy ! Component: 750 - total flux cleaned = -0.000556606 Jy ! Component: 800 - total flux cleaned = -0.000531021 Jy ! Component: 850 - total flux cleaned = -0.000539572 Jy ! Component: 900 - total flux cleaned = -0.000539501 Jy ! Component: 950 - total flux cleaned = -0.000514756 Jy ! Component: 1000 - total flux cleaned = -0.000482049 Jy ! Component: 1050 - total flux cleaned = -0.000498212 Jy ! Component: 1100 - total flux cleaned = -0.000482167 Jy ! Component: 1150 - total flux cleaned = -0.000474216 Jy ! Component: 1200 - total flux cleaned = -0.000489913 Jy ! Component: 1250 - total flux cleaned = -0.000442935 Jy ! Component: 1300 - total flux cleaned = -0.000481867 Jy ! Component: 1350 - total flux cleaned = -0.000458748 Jy ! Component: 1400 - total flux cleaned = -0.000443561 Jy ! Component: 1450 - total flux cleaned = -0.000451152 Jy ! Component: 1500 - total flux cleaned = -0.000466179 Jy ! Component: 1550 - total flux cleaned = -0.000458716 Jy ! Component: 1600 - total flux cleaned = -0.00045876 Jy ! Component: 1650 - total flux cleaned = -0.000502896 Jy ! Component: 1700 - total flux cleaned = -0.00050282 Jy ! Component: 1750 - total flux cleaned = -0.000495566 Jy ! Component: 1800 - total flux cleaned = -0.000495623 Jy ! Component: 1850 - total flux cleaned = -0.000502746 Jy ! Component: 1900 - total flux cleaned = -0.00051696 Jy ! Component: 1950 - total flux cleaned = -0.000538245 Jy ! Component: 2000 - total flux cleaned = -0.000545259 Jy ! Component: 2050 - total flux cleaned = -0.000566252 Jy ! Component: 2100 - total flux cleaned = -0.000545409 Jy ! Component: 2150 - total flux cleaned = -0.000572966 Jy ! Component: 2200 - total flux cleaned = -0.000566146 Jy ! Component: 2250 - total flux cleaned = -0.000607034 Jy ! Component: 2300 - total flux cleaned = -0.000593441 Jy ! Component: 2350 - total flux cleaned = -0.000593483 Jy ! Component: 2400 - total flux cleaned = -0.000606941 Jy ! Component: 2450 - total flux cleaned = -0.00061359 Jy ! Component: 2500 - total flux cleaned = -0.000620202 Jy ! Component: 2550 - total flux cleaned = -0.00065982 Jy ! Component: 2600 - total flux cleaned = -0.000653295 Jy ! Component: 2650 - total flux cleaned = -0.000666314 Jy ! Component: 2700 - total flux cleaned = -0.000672807 Jy ! Component: 2750 - total flux cleaned = -0.000692197 Jy ! Component: 2800 - total flux cleaned = -0.000704987 Jy ! Component: 2850 - total flux cleaned = -0.000717786 Jy ! Component: 2900 - total flux cleaned = -0.000717741 Jy ! Component: 2950 - total flux cleaned = -0.000698816 Jy ! Component: 3000 - total flux cleaned = -0.000723958 Jy ! Component: 3050 - total flux cleaned = -0.000711429 Jy ! Component: 3100 - total flux cleaned = -0.000711413 Jy ! Component: 3150 - total flux cleaned = -0.000705189 Jy ! Component: 3200 - total flux cleaned = -0.000717555 Jy ! Component: 3250 - total flux cleaned = -0.000717546 Jy ! Component: 3300 - total flux cleaned = -0.000699171 Jy ! Component: 3350 - total flux cleaned = -0.000711334 Jy ! Component: 3400 - total flux cleaned = -0.000735606 Jy ! Component: 3450 - total flux cleaned = -0.000723566 Jy ! Component: 3500 - total flux cleaned = -0.000735554 Jy ! Component: 3550 - total flux cleaned = -0.000729592 Jy ! Component: 3600 - total flux cleaned = -0.000741514 Jy ! Component: 3650 - total flux cleaned = -0.000747414 Jy ! Component: 3700 - total flux cleaned = -0.000741517 Jy ! Component: 3750 - total flux cleaned = -0.000747415 Jy ! Component: 3800 - total flux cleaned = -0.000735696 Jy ! Component: 3850 - total flux cleaned = -0.000741512 Jy ! Component: 3900 - total flux cleaned = -0.000741528 Jy ! Component: 3950 - total flux cleaned = -0.000718402 Jy ! Component: 4000 - total flux cleaned = -0.00072412 Jy ! Component: 4050 - total flux cleaned = -0.000758592 Jy ! Total flux subtracted in 4096 components = -0.000735727 Jy ! Clean residual min=-0.000390 max=0.000300 Jy/beam ! Clean residual mean=-0.000000 rms=0.000101 Jy/beam ! Combined flux in latest and established models = 0.155305 Jy keep ! Adding 342 model components to the UV plane model. ! The established model now contains 633 components and 0.155305 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0331-1051_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7939 x 2.002 at -2.213 degrees (North through East) ! Clean map min=-0.00059146 max=0.04518 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0331-1051_X_map.fits wmodel /vlbi/bp222/temp_maps//J0331-1051_X_map.mod ! Writing 633 model components to file: /vlbi/bp222/temp_maps//J0331-1051_X_map.mod wobs /vlbi/bp222/temp_maps//J0331-1051_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0331-1051_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0331-1051_X_map.win ! wwins: Wrote 12 windows to /vlbi/bp222/temp_maps//J0331-1051_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0451797 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000101104 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.671349 0.671349 1.3427 2.6854 5.37079 10.7416 21.4832 42.9663 85.9327 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.045 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 446.861 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0331-1051_X_dfm.log closed on Thu Feb 14 22:28:28 2019