! Started logfile: /vlbi/bp222/temp_maps//J0234+0446_X_dfm.log on Thu Feb 14 22:26:20 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0234+0446_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0234+0446_X_uvm.fits ! AN table 1: 23 integrations on 28 of 28 possible baselines. ! AN table 2: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.95971 visibilities/baseline/integration-bin. ! Found source: J0234+0446 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 57168 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0234+0446_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.003332Jy sigma=16.411656 ! Fit after self-cal, rms=0.948061Jy sigma=15.470192 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6474 mas, bmaj=1.738 mas, bpa=-1.401 degrees ! Estimated noise=0.351706 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380965 Jy ! Component: 100 - total flux cleaned = 0.0497692 Jy ! Total flux subtracted in 100 components = 0.0497692 Jy ! Clean residual min=-0.008785 max=0.017923 Jy/beam ! Clean residual mean=-0.000001 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.0497692 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0497692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072342Jy sigma=1.106293 ! Fit after self-cal, rms=0.070952Jy sigma=1.081853 ! Inverting map ! Added new window around map position (-2.4, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175999 Jy ! Component: 100 - total flux cleaned = 0.0265073 Jy ! Total flux subtracted in 100 components = 0.0265073 Jy ! Clean residual min=-0.006382 max=0.007195 Jy/beam ! Clean residual mean=-0.000000 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.0762766 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 19 components and 0.0762765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065858Jy sigma=0.989825 ! Fit after self-cal, rms=0.064458Jy sigma=0.964210 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115598 Jy ! Component: 100 - total flux cleaned = 0.0175622 Jy ! Total flux subtracted in 100 components = 0.0175622 Jy ! Clean residual min=-0.004767 max=0.005221 Jy/beam ! Clean residual mean=0.000000 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.0938387 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 0.0938387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062096Jy sigma=0.920771 ! Fit after self-cal, rms=0.061748Jy sigma=0.914162 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00655054 Jy ! Component: 100 - total flux cleaned = 0.010025 Jy ! Total flux subtracted in 100 components = 0.010025 Jy ! Clean residual min=-0.003846 max=0.004738 Jy/beam ! Clean residual mean=0.000000 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.103864 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.103864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060976Jy sigma=0.899900 ! Fit after self-cal, rms=0.060927Jy sigma=0.898496 ! Inverting map ! Added new window around map position (-0.8, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398343 Jy ! Component: 100 - total flux cleaned = 0.00605123 Jy ! Total flux subtracted in 100 components = 0.00605123 Jy ! Clean residual min=-0.003216 max=0.003119 Jy/beam ! Clean residual mean=0.000000 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.109915 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.109915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060539Jy sigma=0.891904 ! Fit after self-cal, rms=0.060527Jy sigma=0.891359 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8509 mas, bmaj=2.059 mas, bpa=-1.04 degrees ! Estimated noise=0.190687 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262409 Jy ! Component: 100 - total flux cleaned = 0.00353553 Jy ! Component: 150 - total flux cleaned = 0.0040824 Jy ! Component: 200 - total flux cleaned = 0.00438706 Jy ! Total flux subtracted in 200 components = 0.00438706 Jy ! Clean residual min=-0.002468 max=0.001968 Jy/beam ! Clean residual mean=0.000000 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.114302 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.114302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060346Jy sigma=0.888351 ! Fit after self-cal, rms=0.060348Jy sigma=0.888153 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8509 x 2.059 at -1.04 degrees (North through East) ! Clean map min=-0.0022062 max=0.050785 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.98 HN 0.90 LA 0.95 ! MK 1.03 NL 1.04 OV 0.91 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 HN 0.88 KP 1.04 ! LA 1.01 MK 1.13 NL 1.02 OV 0.93 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.92 HN 0.99 LA 0.91 ! MK 0.94 NL 0.93 OV 0.90 PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 HN 0.90 KP 1.07 ! LA 1.03 MK 1.14 NL 0.99 OV 0.96 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.92 HN 0.95 LA 0.92 ! MK 0.98 NL 1.06 OV 0.98 PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 HN 0.90 KP 1.07 ! LA 1.04 MK 1.19 NL 1.01 OV 0.95 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 0.97 LA 0.99 ! MK 1.02 NL 1.00 OV 0.93 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.99 HN 0.94 KP 1.07 ! LA 1.02 MK 1.16 NL 1.00 OV 0.97 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.90 HN 1.00 LA 1.04 ! MK 1.05 NL 1.07 OV 0.93 PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 HN 0.94 KP 1.05 ! LA 1.02 MK 1.13 NL 1.01 OV 0.96 ! PT 1.00 SC 1.08 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.92 HN 0.95 LA 0.98 ! MK 1.09 NL 0.91 OV 0.94 PT 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.98 HN 0.93 KP 1.08 ! LA 1.03 MK 1.20 NL 1.01 OV 0.94 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.86 HN 0.97 LA 0.96 ! MK 1.17 NL 0.92 OV 0.91 PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.00 HN 0.98 KP 1.08 ! LA 1.01 MK 1.16 NL 0.99 OV 0.92 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.98 HN 0.97 LA 1.01 ! MK 0.98 NL 0.88 OV 0.98 PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.02 HN 0.94 KP 1.04 ! LA 1.02 MK 1.18 NL 1.02 OV 0.94 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.97 HN 0.94 LA 1.01 ! MK 0.90 NL 0.86 OV 0.95 PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HN 0.94 KP 1.08 ! LA 1.03 MK 1.15 NL 0.99 OV 0.96 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.99 HN 0.92 LA 1.05 ! MK 0.92 NL 0.80 OV 0.97 PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.99 HN 0.85 KP 1.05 ! LA 1.03 MK 1.30 NL 0.94 OV 0.97 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.86 HN 1.10 LA 1.02 ! MK 0.96 NL 0.98 OV 0.93 PT 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.04 HN 0.86 KP 1.08 ! LA 1.04 MK 1.21 NL 0.98 OV 0.95 ! PT 1.01 SC 1.11 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.93 HN 0.92 LA 1.07 ! MK 0.74 NL 0.96 OV 0.93 PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.04 HN 0.89 KP 1.08 ! LA 1.02 MK 1.10 NL 0.95 OV 0.94 ! PT 1.01 SC 0.96 ! ! ! Fit before self-cal, rms=0.060348Jy sigma=0.888153 ! Fit after self-cal, rms=0.058802Jy sigma=0.882319 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8699 mas, bmaj=2.08 mas, bpa=-0.4479 degrees ! Estimated noise=0.190788 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.75893e-05 Jy ! Component: 100 - total flux cleaned = 0.000155191 Jy ! Component: 150 - total flux cleaned = 0.000153256 Jy ! Component: 200 - total flux cleaned = 0.000151877 Jy ! Total flux subtracted in 200 components = 0.000151877 Jy ! Clean residual min=-0.001066 max=0.001094 Jy/beam ! Clean residual mean=0.000000 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.114454 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.114454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058731Jy sigma=0.881526 ! Fit after self-cal, rms=0.058763Jy sigma=0.881230 ! Inverting map ! Added new window around map position (5, -15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000685486 Jy ! Component: 100 - total flux cleaned = 0.000899222 Jy ! Component: 150 - total flux cleaned = 0.000978595 Jy ! Component: 200 - total flux cleaned = 0.00102745 Jy ! Total flux subtracted in 200 components = 0.00102745 Jy ! Clean residual min=-0.001074 max=0.000847 Jy/beam ! Clean residual mean=0.000000 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.115481 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.115481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058727Jy sigma=0.880791 ! Fit after self-cal, rms=0.058726Jy sigma=0.880754 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058726Jy sigma=0.880754 ! Fit after self-cal, rms=0.058256Jy sigma=0.880135 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8698 mas, bmaj=2.083 mas, bpa=-0.6029 degrees ! Estimated noise=0.189478 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.19258e-05 Jy ! Component: 100 - total flux cleaned = 9.971e-05 Jy ! Component: 150 - total flux cleaned = 0.000188138 Jy ! Component: 200 - total flux cleaned = 0.000248614 Jy ! Total flux subtracted in 200 components = 0.000248614 Jy ! Clean residual min=-0.000919 max=0.000751 Jy/beam ! Clean residual mean=0.000000 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.11573 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.11573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058233Jy sigma=0.879881 ! Fit after self-cal, rms=0.058240Jy sigma=0.879843 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.27328e-05 Jy ! Component: 100 - total flux cleaned = 0.000100449 Jy ! Component: 150 - total flux cleaned = 0.000118074 Jy ! Component: 200 - total flux cleaned = 0.000134099 Jy ! Total flux subtracted in 200 components = 0.000134099 Jy ! Clean residual min=-0.000911 max=0.000729 Jy/beam ! Clean residual mean=0.000000 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.115864 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.115864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058228Jy sigma=0.879701 ! Fit after self-cal, rms=0.058227Jy sigma=0.879694 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058227Jy sigma=0.879694 ! Fit after self-cal, rms=0.058222Jy sigma=0.878133 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8684 mas, bmaj=2.083 mas, bpa=-0.73 degrees ! Estimated noise=0.188605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181924 Jy ! Component: 100 - total flux cleaned = 0.000253357 Jy ! Component: 150 - total flux cleaned = 0.000284997 Jy ! Component: 200 - total flux cleaned = 0.000299607 Jy ! Total flux subtracted in 200 components = 0.000299607 Jy ! Clean residual min=-0.000787 max=0.000702 Jy/beam ! Clean residual mean=0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.116164 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.116164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058210Jy sigma=0.878009 ! Fit after self-cal, rms=0.058233Jy sigma=0.877936 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.95485e-05 Jy ! Component: 100 - total flux cleaned = 4.33081e-05 Jy ! Component: 150 - total flux cleaned = 4.30676e-05 Jy ! Component: 200 - total flux cleaned = 4.29955e-05 Jy ! Total flux subtracted in 200 components = 4.29955e-05 Jy ! Clean residual min=-0.000788 max=0.000697 Jy/beam ! Clean residual mean=0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.116207 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 69 components and 0.116207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058226Jy sigma=0.877859 ! Fit after self-cal, rms=0.058227Jy sigma=0.877855 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058227Jy sigma=0.877855 ! Fit after self-cal, rms=0.057882Jy sigma=0.877818 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.02 mas, bmaj=3.148 mas, bpa=-2.698 degrees ! Estimated noise=0.239849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.45998e-06 Jy ! Component: 100 - total flux cleaned = -4.80127e-06 Jy ! Component: 150 - total flux cleaned = -2.04062e-05 Jy ! Component: 200 - total flux cleaned = -4.17462e-05 Jy ! Total flux subtracted in 200 components = -4.17462e-05 Jy ! Clean residual min=-0.000752 max=0.000812 Jy/beam ! Clean residual mean=0.000000 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.116165 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.116165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057880Jy sigma=0.877766 ! Fit after self-cal, rms=0.057883Jy sigma=0.877759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.31492e-05 Jy ! Component: 100 - total flux cleaned = -7.28936e-05 Jy ! Component: 150 - total flux cleaned = -9.10233e-05 Jy ! Component: 200 - total flux cleaned = -0.000102529 Jy ! Total flux subtracted in 200 components = -0.000102529 Jy ! Clean residual min=-0.000749 max=0.000819 Jy/beam ! Clean residual mean=0.000000 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.116062 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.116062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057882Jy sigma=0.877743 ! Fit after self-cal, rms=0.057882Jy sigma=0.877740 ! Inverting map ! Added new window around map position (-6.8, -40.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00058338 Jy ! Component: 100 - total flux cleaned = 0.000817565 Jy ! Component: 150 - total flux cleaned = 0.000925274 Jy ! Component: 200 - total flux cleaned = 0.000950456 Jy ! Total flux subtracted in 200 components = 0.000950456 Jy ! Clean residual min=-0.000724 max=0.000671 Jy/beam ! Clean residual mean=0.000000 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.117013 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 101 components and 0.117013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057875Jy sigma=0.877577 ! Fit after self-cal, rms=0.057874Jy sigma=0.877556 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8665 mas, bmaj=2.081 mas, bpa=-0.808 degrees ! Estimated noise=0.187858 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8665 x 2.081 at -0.808 degrees (North through East) ! Clean map min=-0.00092737 max=0.049157 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6616 mas, bmaj=1.752 mas, bpa=-1.244 degrees ! Estimated noise=0.350999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0431439 Jy ! Component: 100 - total flux cleaned = 0.0641242 Jy ! Component: 150 - total flux cleaned = 0.0768649 Jy ! Component: 200 - total flux cleaned = 0.0854433 Jy ! Total flux subtracted in 200 components = 0.0854433 Jy ! Clean residual min=-0.003362 max=0.005041 Jy/beam ! Clean residual mean=-0.000000 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0854434 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0854434 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8665 mas, bmaj=2.081 mas, bpa=-0.808 degrees ! Estimated noise=0.187858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00935924 Jy ! Component: 100 - total flux cleaned = 0.0154731 Jy ! Component: 150 - total flux cleaned = 0.0197347 Jy ! Component: 200 - total flux cleaned = 0.0227659 Jy ! Total flux subtracted in 200 components = 0.0227659 Jy ! Clean residual min=-0.001453 max=0.002005 Jy/beam ! Clean residual mean=-0.000001 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.108209 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 53 components and 0.108209 Jy ! Inverting map ! Added new window around map position (-1.8, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021832 Jy ! Component: 100 - total flux cleaned = 0.0033022 Jy ! Component: 150 - total flux cleaned = 0.00417215 Jy ! Component: 200 - total flux cleaned = 0.00490374 Jy ! Total flux subtracted in 200 components = 0.00490374 Jy ! Clean residual min=-0.000974 max=0.001191 Jy/beam ! Clean residual mean=-0.000000 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.113113 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 72 components and 0.113113 Jy ! Inverting map ! Added new window around map position (0.8, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113346 Jy ! Component: 100 - total flux cleaned = 0.00164221 Jy ! Component: 150 - total flux cleaned = 0.00212699 Jy ! Component: 200 - total flux cleaned = 0.00256023 Jy ! Total flux subtracted in 200 components = 0.00256023 Jy ! Clean residual min=-0.000855 max=0.000752 Jy/beam ! Clean residual mean=0.000000 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.115673 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 89 components and 0.115673 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.02 mas, bmaj=3.148 mas, bpa=-2.698 degrees ! Estimated noise=0.239849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590544 Jy ! Component: 100 - total flux cleaned = 0.000888801 Jy ! Component: 150 - total flux cleaned = 0.00112367 Jy ! Component: 200 - total flux cleaned = 0.00131005 Jy ! Total flux subtracted in 200 components = 0.00131005 Jy ! Clean residual min=-0.000781 max=0.000726 Jy/beam ! Clean residual mean=0.000000 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.116983 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134079 Jy ! Component: 100 - total flux cleaned = 0.000149429 Jy ! Component: 150 - total flux cleaned = 0.000163931 Jy ! Component: 200 - total flux cleaned = 0.000177465 Jy ! Total flux subtracted in 200 components = 0.000177465 Jy ! Clean residual min=-0.000767 max=0.000681 Jy/beam ! Clean residual mean=0.000000 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.117161 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 131 components and 0.117161 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8665 mas, bmaj=2.081 mas, bpa=-0.808 degrees ! Estimated noise=0.187858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272545 Jy ! Component: 100 - total flux cleaned = 0.000251946 Jy ! Component: 150 - total flux cleaned = 0.000152961 Jy ! Component: 200 - total flux cleaned = 5.86412e-05 Jy ! Total flux subtracted in 200 components = 5.86412e-05 Jy ! Clean residual min=-0.000710 max=0.000695 Jy/beam ! Clean residual mean=0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.117219 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 153 components and 0.117219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057866Jy sigma=0.877393 ! Fit after self-cal, rms=0.057848Jy sigma=0.877249 wmodel J0234+0446_X_map.mod ! Writing 153 model components to file: J0234+0446_X_map.mod wobs J0234+0446_X_uvs.fits ! Writing UV FITS file: J0234+0446_X_uvs.fits wwins J0234+0446_X_map.win ! wwins: Wrote 7 windows to J0234+0446_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107319 Jy ! Component: 100 - total flux cleaned = -9.47728e-05 Jy ! Component: 150 - total flux cleaned = -0.000165533 Jy ! Component: 200 - total flux cleaned = -0.000211119 Jy ! Component: 250 - total flux cleaned = -0.000266879 Jy ! Component: 300 - total flux cleaned = -0.000321345 Jy ! Component: 350 - total flux cleaned = -0.000363987 Jy ! Component: 400 - total flux cleaned = -0.000447639 Jy ! Component: 450 - total flux cleaned = -0.000519433 Jy ! Component: 500 - total flux cleaned = -0.000590132 Jy ! Component: 550 - total flux cleaned = -0.000649822 Jy ! Component: 600 - total flux cleaned = -0.00070865 Jy ! Component: 650 - total flux cleaned = -0.00071826 Jy ! Component: 700 - total flux cleaned = -0.000756481 Jy ! Component: 750 - total flux cleaned = -0.000766065 Jy ! Component: 800 - total flux cleaned = -0.00081271 Jy ! Component: 850 - total flux cleaned = -0.000886384 Jy ! Component: 900 - total flux cleaned = -0.000895558 Jy ! Component: 950 - total flux cleaned = -0.000940759 Jy ! Component: 1000 - total flux cleaned = -0.00100329 Jy ! Component: 1050 - total flux cleaned = -0.00105633 Jy ! Component: 1100 - total flux cleaned = -0.00104773 Jy ! Component: 1150 - total flux cleaned = -0.00109133 Jy ! Component: 1200 - total flux cleaned = -0.00115154 Jy ! Component: 1250 - total flux cleaned = -0.00116004 Jy ! Component: 1300 - total flux cleaned = -0.00117702 Jy ! Component: 1350 - total flux cleaned = -0.00117707 Jy ! Component: 1400 - total flux cleaned = -0.00118549 Jy ! Component: 1450 - total flux cleaned = -0.00119374 Jy ! Component: 1500 - total flux cleaned = -0.00120186 Jy ! Component: 1550 - total flux cleaned = -0.00122622 Jy ! Component: 1600 - total flux cleaned = -0.00121011 Jy ! Component: 1650 - total flux cleaned = -0.00122612 Jy ! Component: 1700 - total flux cleaned = -0.00124199 Jy ! Component: 1750 - total flux cleaned = -0.00124986 Jy ! Component: 1800 - total flux cleaned = -0.00122632 Jy ! Component: 1850 - total flux cleaned = -0.00121065 Jy ! Component: 1900 - total flux cleaned = -0.00122615 Jy ! Component: 1950 - total flux cleaned = -0.00122619 Jy ! Component: 2000 - total flux cleaned = -0.00125691 Jy ! Component: 2050 - total flux cleaned = -0.00122644 Jy ! Component: 2100 - total flux cleaned = -0.00127199 Jy ! Component: 2150 - total flux cleaned = -0.00127953 Jy ! Component: 2200 - total flux cleaned = -0.00128715 Jy ! Component: 2250 - total flux cleaned = -0.00132448 Jy ! Component: 2300 - total flux cleaned = -0.00133925 Jy ! Component: 2350 - total flux cleaned = -0.00142041 Jy ! Component: 2400 - total flux cleaned = -0.00139103 Jy ! Component: 2450 - total flux cleaned = -0.00142754 Jy ! Component: 2500 - total flux cleaned = -0.00144944 Jy ! Component: 2550 - total flux cleaned = -0.00148558 Jy ! Component: 2600 - total flux cleaned = -0.00147121 Jy ! Component: 2650 - total flux cleaned = -0.00154289 Jy ! Component: 2700 - total flux cleaned = -0.00158562 Jy ! Component: 2750 - total flux cleaned = -0.00159975 Jy ! Component: 2800 - total flux cleaned = -0.00162092 Jy ! Component: 2850 - total flux cleaned = -0.00164199 Jy ! Component: 2900 - total flux cleaned = -0.00166293 Jy ! Component: 2950 - total flux cleaned = -0.00168381 Jy ! Component: 3000 - total flux cleaned = -0.00169764 Jy ! Component: 3050 - total flux cleaned = -0.0017183 Jy ! Component: 3100 - total flux cleaned = -0.0017458 Jy ! Component: 3150 - total flux cleaned = -0.00177319 Jy ! Component: 3200 - total flux cleaned = -0.00179362 Jy ! Component: 3250 - total flux cleaned = -0.00181394 Jy ! Component: 3300 - total flux cleaned = -0.00184091 Jy ! Component: 3350 - total flux cleaned = -0.00184765 Jy ! Component: 3400 - total flux cleaned = -0.00186104 Jy ! Component: 3450 - total flux cleaned = -0.00188102 Jy ! Component: 3500 - total flux cleaned = -0.00188101 Jy ! Component: 3550 - total flux cleaned = -0.0018744 Jy ! Component: 3600 - total flux cleaned = -0.00190068 Jy ! Component: 3650 - total flux cleaned = -0.00190723 Jy ! Component: 3700 - total flux cleaned = -0.00192676 Jy ! Component: 3750 - total flux cleaned = -0.00190724 Jy ! Component: 3800 - total flux cleaned = -0.0019202 Jy ! Component: 3850 - total flux cleaned = -0.00194604 Jy ! Component: 3900 - total flux cleaned = -0.00197815 Jy ! Component: 3950 - total flux cleaned = -0.00197175 Jy ! Component: 4000 - total flux cleaned = -0.00198452 Jy ! Component: 4050 - total flux cleaned = -0.00202261 Jy ! Total flux subtracted in 4096 components = -0.00203524 Jy ! Clean residual min=-0.000409 max=0.000399 Jy/beam ! Clean residual mean=-0.000000 rms=0.000113 Jy/beam ! Combined flux in latest and established models = 0.115184 Jy keep ! Adding 336 model components to the UV plane model. ! The established model now contains 489 components and 0.115184 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0234+0446_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8665 x 2.081 at -0.808 degrees (North through East) ! Clean map min=-0.00057879 max=0.049275 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0234+0446_X_map.fits wmodel /vlbi/bp222/temp_maps//J0234+0446_X_map.mod ! Writing 489 model components to file: /vlbi/bp222/temp_maps//J0234+0446_X_map.mod wobs /vlbi/bp222/temp_maps//J0234+0446_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0234+0446_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0234+0446_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/temp_maps//J0234+0446_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0492755 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000113064 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.688357 0.688357 1.37671 2.75343 5.50685 11.0137 22.0274 44.0548 88.1097 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.049 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 435.82 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0234+0446_X_dfm.log closed on Thu Feb 14 22:26:28 2019