! Started logfile: /vlbi/bp222/temp_maps//J0118-2141_X_dfm.log on Thu Feb 14 22:24:57 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0118-2141_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0118-2141_X_uvm.fits ! AN table 1: 65 integrations on 45 of 45 possible baselines. ! AN table 2: 16 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.91564 visibilities/baseline/integration-bin. ! Found source: J0118-2141 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 34776 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0118-2141_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 33 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.471390Jy sigma=16.347188 ! Fit after self-cal, rms=0.261121Jy sigma=2.843670 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.63 mas, bmaj=1.612 mas, bpa=0.8135 degrees ! Estimated noise=0.618467 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.720234 Jy ! Component: 100 - total flux cleaned = 0.956899 Jy ! Total flux subtracted in 100 components = 0.956899 Jy ! Clean residual min=-0.036931 max=0.107411 Jy/beam ! Clean residual mean=-0.000072 rms=0.007230 Jy/beam ! Combined flux in latest and established models = 0.956899 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.956899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.242893Jy sigma=2.709863 ! Fit after self-cal, rms=0.242361Jy sigma=2.705204 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122693 Jy ! Component: 100 - total flux cleaned = 0.190322 Jy ! Total flux subtracted in 100 components = 0.190322 Jy ! Clean residual min=-0.021527 max=0.036066 Jy/beam ! Clean residual mean=-0.000031 rms=0.003993 Jy/beam ! Combined flux in latest and established models = 1.14722 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 7 components and 1.14722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.138216Jy sigma=1.490563 ! Fit after self-cal, rms=0.138037Jy sigma=1.489154 ! Inverting map ! Added new window around map position (-0.6, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0403774 Jy ! Component: 100 - total flux cleaned = 0.0569381 Jy ! Total flux subtracted in 100 components = 0.0569381 Jy ! Clean residual min=-0.018600 max=0.028579 Jy/beam ! Clean residual mean=-0.000019 rms=0.003463 Jy/beam ! Combined flux in latest and established models = 1.20416 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 1.20416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121995Jy sigma=1.295918 ! Fit after self-cal, rms=0.121892Jy sigma=1.295112 ! Inverting map ! Added new window around map position (-1.6, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248677 Jy ! Component: 100 - total flux cleaned = 0.0336549 Jy ! Total flux subtracted in 100 components = 0.0336549 Jy ! Clean residual min=-0.017128 max=0.026538 Jy/beam ! Clean residual mean=-0.000013 rms=0.003195 Jy/beam ! Combined flux in latest and established models = 1.23781 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 1.23781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115342Jy sigma=1.216254 ! Fit after self-cal, rms=0.114805Jy sigma=1.209519 ! Inverting map ! Added new window around map position (2, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214766 Jy ! Component: 100 - total flux cleaned = 0.0302886 Jy ! Total flux subtracted in 100 components = 0.0302886 Jy ! Clean residual min=-0.015534 max=0.015955 Jy/beam ! Clean residual mean=-0.000009 rms=0.002977 Jy/beam ! Combined flux in latest and established models = 1.2681 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 33 components and 1.2681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109923Jy sigma=1.155261 ! Fit after self-cal, rms=0.109787Jy sigma=1.153866 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8412 mas, bmaj=2.027 mas, bpa=0.711 degrees ! Estimated noise=0.366225 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168975 Jy ! Component: 100 - total flux cleaned = 0.0235997 Jy ! Component: 150 - total flux cleaned = 0.0246397 Jy ! Component: 200 - total flux cleaned = 0.0246415 Jy ! Total flux subtracted in 200 components = 0.0246415 Jy ! Clean residual min=-0.020115 max=0.017243 Jy/beam ! Clean residual mean=-0.000008 rms=0.003664 Jy/beam ! Combined flux in latest and established models = 1.29274 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 1.29274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106601Jy sigma=1.114054 ! Fit after self-cal, rms=0.106518Jy sigma=1.113243 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8412 x 2.027 at 0.711 degrees (North through East) ! Clean map min=-0.019786 max=1.0139 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.99 KP 1.01 ! LA 1.00 MK 1.01 NL 1.11 OV 0.91 ! PT 1.01 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.00 LA 0.94 NL 0.94 ! OV 0.97 PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.01 KP 1.02 ! LA 0.99 MK 1.01 NL 1.11 OV 0.92 ! PT 1.02 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 0.99 LA 0.93 NL 0.97 ! OV 0.97 PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.01 KP 1.02 ! LA 0.99 MK 1.00 NL 1.10 OV 0.93 ! PT 1.02 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.00 LA 0.95 NL 0.95 ! OV 0.96 PT 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.01 KP 1.02 ! LA 1.00 MK 1.01 NL 1.10 OV 0.93 ! PT 1.01 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 0.99 LA 0.95 NL 0.97 ! OV 0.97 PT 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.01 KP 1.03 ! LA 0.99 MK 1.00 NL 1.11 OV 0.93 ! PT 1.02 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 0.98 LA 0.95 NL 0.95 ! OV 0.97 PT 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.00 KP 1.02 ! LA 0.99 MK 1.00 NL 1.11 OV 0.93 ! PT 1.02 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 0.98 LA 0.93 NL 0.97 ! OV 0.96 PT 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.02 KP 1.03 ! LA 1.00 MK 1.00 NL 1.11 OV 0.93 ! PT 1.01 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 0.98 LA 0.95 NL 0.96 ! OV 0.96 PT 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.00 KP 1.01 ! LA 1.00 MK 1.00 NL 1.12 OV 0.93 ! PT 1.01 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 0.98 LA 0.97 NL 0.94 ! OV 0.96 PT 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.01 KP 1.02 ! LA 0.99 MK 1.00 NL 1.11 OV 0.94 ! PT 1.02 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 0.96 LA 0.95 NL 0.95 ! OV 0.96 PT 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.01 KP 1.02 ! LA 1.00 MK 1.00 NL 1.11 OV 0.93 ! PT 1.02 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HN 0.97 LA 0.95 NL 0.96 ! OV 0.96 PT 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.99 KP 1.02 ! LA 0.99 MK 0.99 NL 1.12 OV 0.93 ! PT 1.02 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 0.97 LA 0.95 NL 0.96 ! OV 0.96 PT 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.99 KP 1.02 ! LA 1.00 MK 0.99 NL 1.10 OV 0.93 ! PT 1.02 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 0.96 LA 0.96 NL 0.97 ! OV 0.96 PT 0.99 ! ! ! Fit before self-cal, rms=0.106518Jy sigma=1.113243 ! Fit after self-cal, rms=0.087342Jy sigma=0.852540 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8421 mas, bmaj=2.031 mas, bpa=0.8217 degrees ! Estimated noise=0.367384 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.01062 Jy ! Component: 100 - total flux cleaned = -0.0126456 Jy ! Component: 150 - total flux cleaned = -0.0135716 Jy ! Component: 200 - total flux cleaned = -0.0141698 Jy ! Total flux subtracted in 200 components = -0.0141698 Jy ! Clean residual min=-0.008914 max=0.007808 Jy/beam ! Clean residual mean=-0.000008 rms=0.001792 Jy/beam ! Combined flux in latest and established models = 1.27857 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 1.27857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085291Jy sigma=0.832096 ! Fit after self-cal, rms=0.085254Jy sigma=0.831512 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085254Jy sigma=0.831512 ! Fit after self-cal, rms=0.076225Jy sigma=0.748368 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8423 mas, bmaj=2.031 mas, bpa=0.7521 degrees ! Estimated noise=0.367706 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00437114 Jy ! Component: 100 - total flux cleaned = -0.0049196 Jy ! Component: 150 - total flux cleaned = -0.00523349 Jy ! Component: 200 - total flux cleaned = -0.005655 Jy ! Total flux subtracted in 200 components = -0.005655 Jy ! Clean residual min=-0.006317 max=0.005917 Jy/beam ! Clean residual mean=-0.000005 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 1.27292 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 1.27292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075405Jy sigma=0.739253 ! Fit after self-cal, rms=0.075385Jy sigma=0.738885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000314448 Jy ! Component: 100 - total flux cleaned = -0.000564471 Jy ! Component: 150 - total flux cleaned = -0.000685167 Jy ! Component: 200 - total flux cleaned = -0.000905626 Jy ! Total flux subtracted in 200 components = -0.000905626 Jy ! Clean residual min=-0.006001 max=0.005852 Jy/beam ! Clean residual mean=-0.000005 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 1.27201 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 1.27201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075010Jy sigma=0.735011 ! Fit after self-cal, rms=0.074996Jy sigma=0.734799 ! Inverting map ! Added new window around map position (-6.8, 10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00437306 Jy ! Component: 100 - total flux cleaned = 0.0036403 Jy ! Component: 150 - total flux cleaned = 0.00319774 Jy ! Component: 200 - total flux cleaned = 0.00288695 Jy ! Total flux subtracted in 200 components = 0.00288695 Jy ! Clean residual min=-0.005585 max=0.004329 Jy/beam ! Clean residual mean=-0.000005 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 1.2749 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 84 components and 1.2749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074449Jy sigma=0.729965 ! Fit after self-cal, rms=0.074441Jy sigma=0.729592 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074441Jy sigma=0.729592 ! Fit after self-cal, rms=0.067348Jy sigma=0.679622 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.841 mas, bmaj=2.032 mas, bpa=0.732 degrees ! Estimated noise=0.36736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00447275 Jy ! Component: 100 - total flux cleaned = -0.00533025 Jy ! Component: 150 - total flux cleaned = -0.00576994 Jy ! Component: 200 - total flux cleaned = -0.00586453 Jy ! Total flux subtracted in 200 components = -0.00586453 Jy ! Clean residual min=-0.004615 max=0.003615 Jy/beam ! Clean residual mean=-0.000003 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 1.26904 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 1.26904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066792Jy sigma=0.673489 ! Fit after self-cal, rms=0.066787Jy sigma=0.673349 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.9494e-05 Jy ! Component: 100 - total flux cleaned = -0.000152501 Jy ! Component: 150 - total flux cleaned = -0.000227975 Jy ! Component: 200 - total flux cleaned = -0.000227407 Jy ! Total flux subtracted in 200 components = -0.000227407 Jy ! Clean residual min=-0.004494 max=0.003519 Jy/beam ! Clean residual mean=-0.000004 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 1.26881 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 96 components and 1.26881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066621Jy sigma=0.671547 ! Fit after self-cal, rms=0.066617Jy sigma=0.671453 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066617Jy sigma=0.671453 ! Fit after self-cal, rms=0.066442Jy sigma=0.669646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.243 mas, bmaj=4.8 mas, bpa=3.818 degrees ! Estimated noise=0.466784 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00334633 Jy ! Component: 100 - total flux cleaned = -0.00472668 Jy ! Component: 150 - total flux cleaned = -0.00489694 Jy ! Component: 200 - total flux cleaned = -0.00499246 Jy ! Total flux subtracted in 200 components = -0.00499246 Jy ! Clean residual min=-0.004178 max=0.003524 Jy/beam ! Clean residual mean=-0.000008 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 1.26382 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 102 components and 1.26382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066318Jy sigma=0.668479 ! Fit after self-cal, rms=0.066325Jy sigma=0.668361 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.25527e-06 Jy ! Component: 100 - total flux cleaned = -1.02626e-05 Jy ! Component: 150 - total flux cleaned = -9.46746e-06 Jy ! Component: 200 - total flux cleaned = -8.81e-06 Jy ! Total flux subtracted in 200 components = -8.81e-06 Jy ! Clean residual min=-0.003987 max=0.003504 Jy/beam ! Clean residual mean=-0.000008 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 1.26381 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 107 components and 1.26381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066299Jy sigma=0.668198 ! Fit after self-cal, rms=0.066297Jy sigma=0.668156 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8402 mas, bmaj=2.031 mas, bpa=0.7304 degrees ! Estimated noise=0.367084 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8402 x 2.031 at 0.7304 degrees (North through East) ! Clean map min=-0.0049982 max=1.0228 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066297Jy sigma=0.668156 ! Fit after self-cal, rms=0.061954Jy sigma=0.608939 ! Inverting map and beam ! Estimated beam: bmin=0.8405 mas, bmaj=2.032 mas, bpa=0.7379 degrees ! Estimated noise=0.366878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00278983 Jy ! Component: 100 - total flux cleaned = -0.00295538 Jy ! Component: 150 - total flux cleaned = -0.00308645 Jy ! Component: 200 - total flux cleaned = -0.00314855 Jy ! Total flux subtracted in 200 components = -0.00314855 Jy ! Clean residual min=-0.003667 max=0.003028 Jy/beam ! Clean residual mean=-0.000004 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 1.26066 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 113 components and 1.26066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061722Jy sigma=0.606407 ! Fit after self-cal, rms=0.061712Jy sigma=0.606336 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.5426e-05 Jy ! Component: 100 - total flux cleaned = 1.20017e-05 Jy ! Component: 150 - total flux cleaned = 6.41414e-05 Jy ! Component: 200 - total flux cleaned = 1.14675e-05 Jy ! Total flux subtracted in 200 components = 1.14675e-05 Jy ! Clean residual min=-0.003523 max=0.002897 Jy/beam ! Clean residual mean=-0.000004 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 1.26067 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 116 components and 1.26067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061614Jy sigma=0.605371 ! Fit after self-cal, rms=0.061609Jy sigma=0.605325 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061609Jy sigma=0.605325 ! Fit after self-cal, rms=0.061519Jy sigma=0.604544 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6287 mas, bmaj=1.616 mas, bpa=0.8599 degrees ! Estimated noise=0.62004 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.721966 Jy ! Component: 100 - total flux cleaned = 0.962504 Jy ! Component: 150 - total flux cleaned = 1.08584 Jy ! Component: 200 - total flux cleaned = 1.1553 Jy ! Total flux subtracted in 200 components = 1.1553 Jy ! Clean residual min=-0.013836 max=0.034582 Jy/beam ! Clean residual mean=-0.000023 rms=0.002503 Jy/beam ! Combined flux in latest and established models = 1.1553 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.1553 Jy ! Inverting map and beam ! Estimated beam: bmin=0.84 mas, bmaj=2.032 mas, bpa=0.7408 degrees ! Estimated noise=0.366698 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0504972 Jy ! Component: 100 - total flux cleaned = 0.0726852 Jy ! Component: 150 - total flux cleaned = 0.0846324 Jy ! Component: 200 - total flux cleaned = 0.0924965 Jy ! Total flux subtracted in 200 components = 0.0924965 Jy ! Clean residual min=-0.004280 max=0.006522 Jy/beam ! Clean residual mean=-0.000007 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 1.24779 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 27 components and 1.24779 Jy ! Inverting map ! Added new window around map position (-1, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464826 Jy ! Component: 100 - total flux cleaned = 0.00624122 Jy ! Component: 150 - total flux cleaned = 0.00676471 Jy ! Component: 200 - total flux cleaned = 0.00708942 Jy ! Total flux subtracted in 200 components = 0.00708942 Jy ! Clean residual min=-0.003899 max=0.004024 Jy/beam ! Clean residual mean=-0.000004 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 1.25488 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 1.25488 Jy ! Inverting map ! Added new window around map position (0.8, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395404 Jy ! Component: 100 - total flux cleaned = 0.000563578 Jy ! Component: 150 - total flux cleaned = 0.0010143 Jy ! Component: 200 - total flux cleaned = 0.00142838 Jy ! Total flux subtracted in 200 components = 0.00142838 Jy ! Clean residual min=-0.003547 max=0.003296 Jy/beam ! Clean residual mean=-0.000004 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 1.25631 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 1.25631 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.245 mas, bmaj=4.801 mas, bpa=3.881 degrees ! Estimated noise=0.466248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114798 Jy ! Component: 100 - total flux cleaned = 0.00163469 Jy ! Component: 150 - total flux cleaned = 0.00188115 Jy ! Component: 200 - total flux cleaned = 0.00217695 Jy ! Total flux subtracted in 200 components = 0.00217695 Jy ! Clean residual min=-0.002858 max=0.002926 Jy/beam ! Clean residual mean=-0.000007 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 1.25849 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, 12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263072 Jy ! Component: 100 - total flux cleaned = 0.00307538 Jy ! Component: 150 - total flux cleaned = 0.00348047 Jy ! Component: 200 - total flux cleaned = 0.00369922 Jy ! Total flux subtracted in 200 components = 0.00369922 Jy ! Clean residual min=-0.002393 max=0.001960 Jy/beam ! Clean residual mean=-0.000004 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 1.26219 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 103 components and 1.26219 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.84 mas, bmaj=2.032 mas, bpa=0.7408 degrees ! Estimated noise=0.366698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000284399 Jy ! Component: 100 - total flux cleaned = -0.000528158 Jy ! Component: 150 - total flux cleaned = -0.000414213 Jy ! Component: 200 - total flux cleaned = -0.000417389 Jy ! Total flux subtracted in 200 components = -0.000417389 Jy ! Clean residual min=-0.002951 max=0.002616 Jy/beam ! Clean residual mean=-0.000002 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 1.26177 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 122 components and 1.26177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062219Jy sigma=0.613546 ! Fit after self-cal, rms=0.062125Jy sigma=0.612264 wmodel J0118-2141_X_map.mod ! Writing 122 model components to file: J0118-2141_X_map.mod wobs J0118-2141_X_uvs.fits ! Writing UV FITS file: J0118-2141_X_uvs.fits wwins J0118-2141_X_map.win ! wwins: Wrote 8 windows to J0118-2141_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000413606 Jy ! Component: 100 - total flux cleaned = -0.000851871 Jy ! Component: 150 - total flux cleaned = -0.000897254 Jy ! Component: 200 - total flux cleaned = -0.000897502 Jy ! Component: 250 - total flux cleaned = -0.000939345 Jy ! Component: 300 - total flux cleaned = -0.000858839 Jy ! Component: 350 - total flux cleaned = -0.000780397 Jy ! Component: 400 - total flux cleaned = -0.000703554 Jy ! Component: 450 - total flux cleaned = -0.000666584 Jy ! Component: 500 - total flux cleaned = -0.000557095 Jy ! Component: 550 - total flux cleaned = -0.000556814 Jy ! Component: 600 - total flux cleaned = -0.00037957 Jy ! Component: 650 - total flux cleaned = -0.000275362 Jy ! Component: 700 - total flux cleaned = -0.000241387 Jy ! Component: 750 - total flux cleaned = -0.00020758 Jy ! Component: 800 - total flux cleaned = -7.50842e-05 Jy ! Component: 850 - total flux cleaned = -0.000173729 Jy ! Component: 900 - total flux cleaned = -0.000140756 Jy ! Component: 950 - total flux cleaned = -7.66921e-05 Jy ! Component: 1000 - total flux cleaned = -7.70994e-05 Jy ! Component: 1050 - total flux cleaned = -1.51332e-05 Jy ! Component: 1100 - total flux cleaned = -7.67504e-05 Jy ! Component: 1150 - total flux cleaned = -4.61101e-05 Jy ! Component: 1200 - total flux cleaned = 7.39544e-05 Jy ! Component: 1250 - total flux cleaned = 1.42336e-05 Jy ! Component: 1300 - total flux cleaned = -4.46598e-05 Jy ! Component: 1350 - total flux cleaned = -4.4825e-05 Jy ! Component: 1400 - total flux cleaned = -7.33833e-05 Jy ! Component: 1450 - total flux cleaned = 6.92456e-05 Jy ! Component: 1500 - total flux cleaned = 1.26926e-05 Jy ! Component: 1550 - total flux cleaned = -1.54611e-05 Jy ! Component: 1600 - total flux cleaned = -1.52401e-05 Jy ! Component: 1650 - total flux cleaned = 1.2286e-05 Jy ! Component: 1700 - total flux cleaned = 0.000121429 Jy ! Component: 1750 - total flux cleaned = 0.000202505 Jy ! Component: 1800 - total flux cleaned = 0.000282348 Jy ! Component: 1850 - total flux cleaned = 0.000176495 Jy ! Component: 1900 - total flux cleaned = 0.000255624 Jy ! Component: 1950 - total flux cleaned = 0.000307732 Jy ! Component: 2000 - total flux cleaned = 0.000333736 Jy ! Component: 2050 - total flux cleaned = 0.000385075 Jy ! Component: 2100 - total flux cleaned = 0.000410432 Jy ! Component: 2150 - total flux cleaned = 0.00041016 Jy ! Component: 2200 - total flux cleaned = 0.000435351 Jy ! Component: 2250 - total flux cleaned = 0.000435359 Jy ! Component: 2300 - total flux cleaned = 0.000435342 Jy ! Component: 2350 - total flux cleaned = 0.000459715 Jy ! Component: 2400 - total flux cleaned = 0.000387065 Jy ! Component: 2450 - total flux cleaned = 0.000363256 Jy ! Component: 2500 - total flux cleaned = 0.000435348 Jy ! Component: 2550 - total flux cleaned = 0.000388245 Jy ! Component: 2600 - total flux cleaned = 0.000411598 Jy ! Component: 2650 - total flux cleaned = 0.000411378 Jy ! Component: 2700 - total flux cleaned = 0.000573169 Jy ! Component: 2750 - total flux cleaned = 0.00052717 Jy ! Component: 2800 - total flux cleaned = 0.000527355 Jy ! Component: 2850 - total flux cleaned = 0.000572456 Jy ! Component: 2900 - total flux cleaned = 0.000594768 Jy ! Component: 2950 - total flux cleaned = 0.000550262 Jy ! Component: 3000 - total flux cleaned = 0.000572453 Jy ! Component: 3050 - total flux cleaned = 0.000550611 Jy ! Component: 3100 - total flux cleaned = 0.000507015 Jy ! Component: 3150 - total flux cleaned = 0.000506937 Jy ! Component: 3200 - total flux cleaned = 0.000550087 Jy ! Component: 3250 - total flux cleaned = 0.000528567 Jy ! Component: 3300 - total flux cleaned = 0.000571276 Jy ! Component: 3350 - total flux cleaned = 0.000486927 Jy ! Component: 3400 - total flux cleaned = 0.000528914 Jy ! Component: 3450 - total flux cleaned = 0.000507775 Jy ! Component: 3500 - total flux cleaned = 0.000424933 Jy ! Component: 3550 - total flux cleaned = 0.00052827 Jy ! Component: 3600 - total flux cleaned = 0.000404936 Jy ! Component: 3650 - total flux cleaned = 0.000384249 Jy ! Component: 3700 - total flux cleaned = 0.000506054 Jy ! Component: 3750 - total flux cleaned = 0.0004456 Jy ! Component: 3800 - total flux cleaned = 0.000425669 Jy ! Component: 3850 - total flux cleaned = 0.000545261 Jy ! Component: 3900 - total flux cleaned = 0.000505428 Jy ! Component: 3950 - total flux cleaned = 0.000426621 Jy ! Component: 4000 - total flux cleaned = 0.000446175 Jy ! Component: 4050 - total flux cleaned = 0.000465651 Jy ! Total flux subtracted in 4096 components = 0.000485083 Jy ! Clean residual min=-0.001011 max=0.000997 Jy/beam ! Clean residual mean=-0.000001 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 1.26226 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 342 components and 1.26226 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0118-2141_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.84 x 2.032 at 0.7408 degrees (North through East) ! Clean map min=-0.0021679 max=1.0268 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0118-2141_X_map.fits wmodel /vlbi/bp222/temp_maps//J0118-2141_X_map.mod ! Writing 342 model components to file: /vlbi/bp222/temp_maps//J0118-2141_X_map.mod wobs /vlbi/bp222/temp_maps//J0118-2141_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0118-2141_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0118-2141_X_map.win ! wwins: Wrote 9 windows to /vlbi/bp222/temp_maps//J0118-2141_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.02683 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000302058 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0882496 0.0882496 0.176499 0.352998 0.705997 1.41199 2.82399 5.64797 11.2959 22.5919 45.1838 90.3676 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.026 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3399.45 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0118-2141_X_dfm.log closed on Thu Feb 14 22:25:04 2019