! Started logfile: /vlbi/bp222/temp_maps//J0037+6236_X_dfm.log on Thu Feb 14 22:22:54 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0037+6236_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0037+6236_X_uvm.fits ! AN table 1: 71 integrations on 45 of 45 possible baselines. ! AN table 2: 46 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.954272 visibilities/baseline/integration-bin. ! Found source: J0037+6236 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 51336 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0037+6236_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 31 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.006663Jy sigma=15.567173 ! Fit after self-cal, rms=0.907264Jy sigma=13.992058 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6987 mas, bmaj=1.298 mas, bpa=-39.77 degrees ! Estimated noise=0.501375 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0680887 Jy ! Component: 100 - total flux cleaned = 0.0895872 Jy ! Total flux subtracted in 100 components = 0.0895872 Jy ! Clean residual min=-0.003889 max=0.009073 Jy/beam ! Clean residual mean=0.000018 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.0895872 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0895872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065555Jy sigma=0.918736 ! Fit after self-cal, rms=0.065349Jy sigma=0.915782 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010726 Jy ! Component: 100 - total flux cleaned = 0.0171371 Jy ! Total flux subtracted in 100 components = 0.0171371 Jy ! Clean residual min=-0.003109 max=0.007919 Jy/beam ! Clean residual mean=0.000016 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.106724 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.106724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062909Jy sigma=0.868695 ! Fit after self-cal, rms=0.062894Jy sigma=0.868428 ! Inverting map ! Added new window around map position (-3, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00700998 Jy ! Component: 100 - total flux cleaned = 0.0114356 Jy ! Total flux subtracted in 100 components = 0.0114356 Jy ! Clean residual min=-0.002645 max=0.004254 Jy/beam ! Clean residual mean=0.000013 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.11816 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 0.11816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061660Jy sigma=0.843969 ! Fit after self-cal, rms=0.061573Jy sigma=0.842897 ! Inverting map ! Added new window around map position (-1.6, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417923 Jy ! Component: 100 - total flux cleaned = 0.0073623 Jy ! Total flux subtracted in 100 components = 0.0073623 Jy ! Clean residual min=-0.002453 max=0.003708 Jy/beam ! Clean residual mean=0.000012 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.125522 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.125522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061129Jy sigma=0.833471 ! Fit after self-cal, rms=0.061109Jy sigma=0.833202 ! Inverting map ! Added new window around map position (1, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345471 Jy ! Component: 100 - total flux cleaned = 0.00589912 Jy ! Total flux subtracted in 100 components = 0.00589912 Jy ! Clean residual min=-0.002342 max=0.002731 Jy/beam ! Clean residual mean=0.000011 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.131421 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 56 components and 0.131421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060838Jy sigma=0.827777 ! Fit after self-cal, rms=0.060824Jy sigma=0.827548 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9638 mas, bmaj=1.603 mas, bpa=-40.93 degrees ! Estimated noise=0.211613 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359773 Jy ! Component: 100 - total flux cleaned = 0.00597192 Jy ! Component: 150 - total flux cleaned = 0.00773987 Jy ! Component: 200 - total flux cleaned = 0.00909197 Jy ! Total flux subtracted in 200 components = 0.00909197 Jy ! Clean residual min=-0.001814 max=0.002490 Jy/beam ! Clean residual mean=0.000018 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.140513 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 71 components and 0.140513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060589Jy sigma=0.822669 ! Fit after self-cal, rms=0.060569Jy sigma=0.822419 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9638 x 1.603 at -40.93 degrees (North through East) ! Clean map min=-0.0016817 max=0.092573 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.93 KP 1.02 ! LA 0.98 MK 1.05 NL 1.12 OV 0.92 ! PT 0.97 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.98 HN 0.98 LA 1.00 ! MK 1.06 NL 1.05 OV 0.96 PT 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.95 KP 1.04 ! LA 1.00 MK 1.05 NL 1.12 OV 0.92 ! PT 0.97 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.99 HN 1.00 LA 0.98 ! MK 1.06 NL 1.07 OV 0.97 PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.91 KP 1.03 ! LA 0.99 MK 1.05 NL 1.12 OV 0.92 ! PT 1.00 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.97 HN 0.97 LA 0.97 ! MK 1.02 NL 1.04 OV 1.00 PT 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.92 KP 1.03 ! LA 0.99 MK 1.09 NL 1.10 OV 0.93 ! PT 0.98 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.98 HN 0.97 LA 0.98 ! MK 1.17 NL 1.04 OV 0.98 PT 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.92 KP 1.04 ! LA 1.01 MK 1.05 NL 1.13 OV 0.95 ! PT 1.01 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.99 HN 0.92 LA 0.97 ! MK 1.02 NL 1.07 OV 0.99 PT 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.92 KP 1.02 ! LA 1.02 MK 1.06 NL 1.10 OV 0.97 ! PT 0.99 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.99 HN 1.02 LA 0.96 ! MK 1.07 NL 1.01 OV 0.97 PT 0.92 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.91 KP 1.03 ! LA 1.02 MK 1.06 NL 1.07 OV 0.94 ! PT 0.98 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.99 HN 1.01 LA 0.99 ! MK 1.00 NL 1.01 OV 0.98 PT 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.88 KP 1.02 ! LA 1.00 MK 1.03 NL 1.11 OV 0.95 ! PT 0.99 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.96 HN 0.95 LA 1.03 ! MK 0.96 NL 1.01 OV 0.99 PT 0.91 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.90 KP 1.03 ! LA 0.98 MK 1.05 NL 1.13 OV 0.95 ! PT 1.01 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.98 HN 0.95 LA 1.00 ! MK 1.07 NL 1.00 OV 1.03 PT 0.95 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 0.92 KP 1.04 ! LA 1.01 MK 1.05 NL 1.11 OV 0.92 ! PT 0.98 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.99 HN 0.98 LA 0.94 ! MK 0.99 NL 1.03 OV 0.98 PT 0.93 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.96 KP 1.02 ! LA 0.99 MK 1.02 NL 1.07 OV 0.94 ! PT 0.97 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.97 HN 0.97 LA 0.97 ! MK 1.04 NL 1.02 OV 1.00 PT 0.91 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 0.91 KP 1.04 ! LA 1.00 MK 0.97 NL 1.10 OV 0.95 ! PT 0.96 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.93 HN 0.96 LA 1.03 ! MK 0.89 NL 1.00 OV 0.99 PT 0.90 ! ! ! Fit before self-cal, rms=0.060569Jy sigma=0.822419 ! Fit after self-cal, rms=0.058623Jy sigma=0.814746 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9727 mas, bmaj=1.601 mas, bpa=-41.35 degrees ! Estimated noise=0.210151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, 5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016429 Jy ! Component: 100 - total flux cleaned = 0.00223932 Jy ! Component: 150 - total flux cleaned = 0.00268033 Jy ! Component: 200 - total flux cleaned = 0.00305387 Jy ! Total flux subtracted in 200 components = 0.00305387 Jy ! Clean residual min=-0.001175 max=0.000988 Jy/beam ! Clean residual mean=0.000008 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.143567 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 95 components and 0.143567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058537Jy sigma=0.813141 ! Fit after self-cal, rms=0.058537Jy sigma=0.812939 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058537Jy sigma=0.812939 ! Fit after self-cal, rms=0.058646Jy sigma=0.811575 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9734 mas, bmaj=1.597 mas, bpa=-41.38 degrees ! Estimated noise=0.210101 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443226 Jy ! Component: 100 - total flux cleaned = 0.000803491 Jy ! Component: 150 - total flux cleaned = 0.00105668 Jy ! Component: 200 - total flux cleaned = 0.00119869 Jy ! Total flux subtracted in 200 components = 0.00119869 Jy ! Clean residual min=-0.000999 max=0.000903 Jy/beam ! Clean residual mean=0.000005 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.144766 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 0.144766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058611Jy sigma=0.810937 ! Fit after self-cal, rms=0.058617Jy sigma=0.810899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135529 Jy ! Component: 100 - total flux cleaned = 0.00025983 Jy ! Component: 150 - total flux cleaned = 0.000351301 Jy ! Component: 200 - total flux cleaned = 0.000437203 Jy ! Total flux subtracted in 200 components = 0.000437203 Jy ! Clean residual min=-0.000974 max=0.000862 Jy/beam ! Clean residual mean=0.000005 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.145203 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 110 components and 0.145203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058599Jy sigma=0.810600 ! Fit after self-cal, rms=0.058598Jy sigma=0.810589 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058598Jy sigma=0.810589 ! Fit after self-cal, rms=0.059611Jy sigma=0.808501 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9742 mas, bmaj=1.585 mas, bpa=-41.2 degrees ! Estimated noise=0.209924 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261065 Jy ! Component: 100 - total flux cleaned = 0.00041671 Jy ! Component: 150 - total flux cleaned = 0.000552507 Jy ! Component: 200 - total flux cleaned = 0.000633504 Jy ! Total flux subtracted in 200 components = 0.000633504 Jy ! Clean residual min=-0.000795 max=0.000887 Jy/beam ! Clean residual mean=0.000002 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.145836 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 115 components and 0.145836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059592Jy sigma=0.808202 ! Fit after self-cal, rms=0.059619Jy sigma=0.808150 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (33.4, 29.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497533 Jy ! Component: 100 - total flux cleaned = 0.000695504 Jy ! Component: 150 - total flux cleaned = 0.000821802 Jy ! Component: 200 - total flux cleaned = 0.000940231 Jy ! Total flux subtracted in 200 components = 0.000940231 Jy ! Clean residual min=-0.000780 max=0.000835 Jy/beam ! Clean residual mean=0.000003 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.146777 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 130 components and 0.146777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059605Jy sigma=0.807917 ! Fit after self-cal, rms=0.059604Jy sigma=0.807909 ! Inverting map ! Added new window around map position (32.6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000547896 Jy ! Component: 100 - total flux cleaned = 0.000564453 Jy ! Component: 150 - total flux cleaned = 0.00067874 Jy ! Component: 200 - total flux cleaned = 0.000755567 Jy ! Total flux subtracted in 200 components = 0.000755567 Jy ! Clean residual min=-0.000745 max=0.000779 Jy/beam ! Clean residual mean=0.000003 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.147532 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 139 components and 0.147532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059592Jy sigma=0.807703 ! Fit after self-cal, rms=0.059592Jy sigma=0.807692 ! Inverting map ! Added new window around map position (-0.6, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019092 Jy ! Component: 100 - total flux cleaned = 9.34531e-05 Jy ! Component: 150 - total flux cleaned = 7.67732e-05 Jy ! Component: 200 - total flux cleaned = 0.000139497 Jy ! Total flux subtracted in 200 components = 0.000139497 Jy ! Clean residual min=-0.000706 max=0.000716 Jy/beam ! Clean residual mean=0.000003 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.147672 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 153 components and 0.147672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059578Jy sigma=0.807462 ! Fit after self-cal, rms=0.059576Jy sigma=0.807449 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059576Jy sigma=0.807449 ! Fit after self-cal, rms=0.059551Jy sigma=0.807363 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.301 mas, bmaj=2.526 mas, bpa=-65.17 degrees ! Estimated noise=0.255558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000345047 Jy ! Component: 100 - total flux cleaned = 0.000497491 Jy ! Component: 150 - total flux cleaned = 0.000664203 Jy ! Component: 200 - total flux cleaned = 0.000799307 Jy ! Total flux subtracted in 200 components = 0.000799307 Jy ! Clean residual min=-0.000849 max=0.000696 Jy/beam ! Clean residual mean=0.000004 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.148471 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 172 components and 0.148471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059545Jy sigma=0.807245 ! Fit after self-cal, rms=0.059544Jy sigma=0.807233 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105393 Jy ! Component: 100 - total flux cleaned = 0.000198186 Jy ! Component: 150 - total flux cleaned = 0.000271764 Jy ! Component: 200 - total flux cleaned = 0.000328853 Jy ! Total flux subtracted in 200 components = 0.000328853 Jy ! Clean residual min=-0.000816 max=0.000695 Jy/beam ! Clean residual mean=0.000004 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.1488 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 184 components and 0.1488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059541Jy sigma=0.807173 ! Fit after self-cal, rms=0.059541Jy sigma=0.807171 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.975 mas, bmaj=1.577 mas, bpa=-41.24 degrees ! Estimated noise=0.209816 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.975 x 1.577 at -41.24 degrees (North through East) ! Clean map min=-0.00080837 max=0.091847 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7071 mas, bmaj=1.271 mas, bpa=-39.81 degrees ! Estimated noise=0.49744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0678031 Jy ! Component: 100 - total flux cleaned = 0.0899761 Jy ! Component: 150 - total flux cleaned = 0.101366 Jy ! Component: 200 - total flux cleaned = 0.109345 Jy ! Total flux subtracted in 200 components = 0.109345 Jy ! Clean residual min=-0.002908 max=0.004577 Jy/beam ! Clean residual mean=0.000009 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.109345 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.109345 Jy ! Inverting map and beam ! Estimated beam: bmin=0.975 mas, bmaj=1.577 mas, bpa=-41.24 degrees ! Estimated noise=0.209816 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00975031 Jy ! Component: 100 - total flux cleaned = 0.0160206 Jy ! Component: 150 - total flux cleaned = 0.0203682 Jy ! Component: 200 - total flux cleaned = 0.0235592 Jy ! Total flux subtracted in 200 components = 0.0235592 Jy ! Clean residual min=-0.001168 max=0.002041 Jy/beam ! Clean residual mean=0.000005 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.132904 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 56 components and 0.132904 Jy ! Inverting map ! Added new window around map position (-4.2, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025326 Jy ! Component: 100 - total flux cleaned = 0.00458707 Jy ! Component: 150 - total flux cleaned = 0.00625922 Jy ! Component: 200 - total flux cleaned = 0.00752801 Jy ! Total flux subtracted in 200 components = 0.00752801 Jy ! Clean residual min=-0.000915 max=0.001023 Jy/beam ! Clean residual mean=0.000003 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.140432 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 87 components and 0.140432 Jy ! Inverting map ! Added new window around map position (-9.2, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117421 Jy ! Component: 100 - total flux cleaned = 0.00219952 Jy ! Component: 150 - total flux cleaned = 0.0031068 Jy ! Component: 200 - total flux cleaned = 0.00391311 Jy ! Total flux subtracted in 200 components = 0.00391311 Jy ! Clean residual min=-0.000748 max=0.000752 Jy/beam ! Clean residual mean=0.000002 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.144345 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 110 components and 0.144345 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.301 mas, bmaj=2.526 mas, bpa=-65.17 degrees ! Estimated noise=0.255558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012361 Jy ! Component: 100 - total flux cleaned = 0.00214466 Jy ! Component: 150 - total flux cleaned = 0.00281493 Jy ! Component: 200 - total flux cleaned = 0.00327181 Jy ! Total flux subtracted in 200 components = 0.00327181 Jy ! Clean residual min=-0.000801 max=0.000677 Jy/beam ! Clean residual mean=0.000004 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.147617 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387966 Jy ! Component: 100 - total flux cleaned = 0.000638078 Jy ! Component: 150 - total flux cleaned = 0.000860398 Jy ! Component: 200 - total flux cleaned = 0.0010173 Jy ! Total flux subtracted in 200 components = 0.0010173 Jy ! Clean residual min=-0.000759 max=0.000683 Jy/beam ! Clean residual mean=0.000004 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.148634 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 179 components and 0.148634 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.975 mas, bmaj=1.577 mas, bpa=-41.24 degrees ! Estimated noise=0.209816 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.98675e-05 Jy ! Component: 100 - total flux cleaned = 0.000150135 Jy ! Component: 150 - total flux cleaned = 0.000298683 Jy ! Component: 200 - total flux cleaned = 0.000417165 Jy ! Total flux subtracted in 200 components = 0.000417165 Jy ! Clean residual min=-0.000649 max=0.000685 Jy/beam ! Clean residual mean=0.000002 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.149051 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 197 components and 0.149051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059549Jy sigma=0.807276 ! Fit after self-cal, rms=0.059541Jy sigma=0.807211 wmodel J0037+6236_X_map.mod ! Writing 197 model components to file: J0037+6236_X_map.mod wobs J0037+6236_X_uvs.fits ! Writing UV FITS file: J0037+6236_X_uvs.fits wwins J0037+6236_X_map.win ! wwins: Wrote 10 windows to J0037+6236_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.64036e-05 Jy ! Component: 100 - total flux cleaned = 6.23175e-05 Jy ! Component: 150 - total flux cleaned = 7.38423e-05 Jy ! Component: 200 - total flux cleaned = 7.37574e-05 Jy ! Component: 250 - total flux cleaned = 7.37547e-05 Jy ! Component: 300 - total flux cleaned = 8.45985e-05 Jy ! Component: 350 - total flux cleaned = 8.48775e-05 Jy ! Component: 400 - total flux cleaned = 0.000136651 Jy ! Component: 450 - total flux cleaned = 0.000156786 Jy ! Component: 500 - total flux cleaned = 0.000166753 Jy ! Component: 550 - total flux cleaned = 0.000117479 Jy ! Component: 600 - total flux cleaned = 0.000136912 Jy ! Component: 650 - total flux cleaned = 9.8334e-05 Jy ! Component: 700 - total flux cleaned = 7.93831e-05 Jy ! Component: 750 - total flux cleaned = 9.80899e-05 Jy ! Component: 800 - total flux cleaned = 6.07227e-05 Jy ! Component: 850 - total flux cleaned = 7.91789e-05 Jy ! Component: 900 - total flux cleaned = 5.17464e-05 Jy ! Component: 950 - total flux cleaned = 6.99305e-05 Jy ! Component: 1000 - total flux cleaned = 5.19371e-05 Jy ! Component: 1050 - total flux cleaned = 4.30299e-05 Jy ! Component: 1100 - total flux cleaned = 5.18601e-05 Jy ! Component: 1150 - total flux cleaned = 5.18808e-05 Jy ! Component: 1200 - total flux cleaned = 5.18111e-05 Jy ! Component: 1250 - total flux cleaned = 6.03477e-05 Jy ! Component: 1300 - total flux cleaned = 7.75554e-05 Jy ! Component: 1350 - total flux cleaned = 6.05274e-05 Jy ! Component: 1400 - total flux cleaned = 7.74562e-05 Jy ! Component: 1450 - total flux cleaned = 5.24205e-05 Jy ! Component: 1500 - total flux cleaned = 0.000110667 Jy ! Component: 1550 - total flux cleaned = 6.92914e-05 Jy ! Component: 1600 - total flux cleaned = 0.000102048 Jy ! Component: 1650 - total flux cleaned = 0.000118382 Jy ! Component: 1700 - total flux cleaned = 7.77965e-05 Jy ! Component: 1750 - total flux cleaned = 0.000102032 Jy ! Component: 1800 - total flux cleaned = 8.5866e-05 Jy ! Component: 1850 - total flux cleaned = 8.58644e-05 Jy ! Component: 1900 - total flux cleaned = 0.000101732 Jy ! Component: 1950 - total flux cleaned = 7.80124e-05 Jy ! Component: 2000 - total flux cleaned = 7.01961e-05 Jy ! Component: 2050 - total flux cleaned = 7.01826e-05 Jy ! Component: 2100 - total flux cleaned = 5.46182e-05 Jy ! Component: 2150 - total flux cleaned = 5.4647e-05 Jy ! Component: 2200 - total flux cleaned = 4.69152e-05 Jy ! Component: 2250 - total flux cleaned = 7.7506e-05 Jy ! Component: 2300 - total flux cleaned = 3.94393e-05 Jy ! Component: 2350 - total flux cleaned = 9.21636e-06 Jy ! Component: 2400 - total flux cleaned = 5.43662e-05 Jy ! Component: 2450 - total flux cleaned = 4.68883e-05 Jy ! Component: 2500 - total flux cleaned = 3.94237e-05 Jy ! Component: 2550 - total flux cleaned = 5.4207e-05 Jy ! Component: 2600 - total flux cleaned = 6.15567e-05 Jy ! Component: 2650 - total flux cleaned = 7.6251e-05 Jy ! Component: 2700 - total flux cleaned = 6.16494e-05 Jy ! Component: 2750 - total flux cleaned = 5.43843e-05 Jy ! Component: 2800 - total flux cleaned = 8.33421e-05 Jy ! Component: 2850 - total flux cleaned = 7.61229e-05 Jy ! Component: 2900 - total flux cleaned = 9.04984e-05 Jy ! Component: 2950 - total flux cleaned = 7.61258e-05 Jy ! Component: 3000 - total flux cleaned = 5.4828e-05 Jy ! Component: 3050 - total flux cleaned = 8.31797e-05 Jy ! Component: 3100 - total flux cleaned = 9.73403e-05 Jy ! Component: 3150 - total flux cleaned = 7.62695e-05 Jy ! Component: 3200 - total flux cleaned = 5.52551e-05 Jy ! Component: 3250 - total flux cleaned = 7.61218e-05 Jy ! Component: 3300 - total flux cleaned = 8.31009e-05 Jy ! Component: 3350 - total flux cleaned = 8.99917e-05 Jy ! Component: 3400 - total flux cleaned = 8.99777e-05 Jy ! Component: 3450 - total flux cleaned = 0.000110489 Jy ! Component: 3500 - total flux cleaned = 7.63562e-05 Jy ! Component: 3550 - total flux cleaned = 0.000103521 Jy ! Component: 3600 - total flux cleaned = 0.000103498 Jy ! Component: 3650 - total flux cleaned = 0.000110281 Jy ! Component: 3700 - total flux cleaned = 0.000103675 Jy ! Component: 3750 - total flux cleaned = 0.000110358 Jy ! Component: 3800 - total flux cleaned = 0.000130346 Jy ! Component: 3850 - total flux cleaned = 0.000103873 Jy ! Component: 3900 - total flux cleaned = 0.000117022 Jy ! Component: 3950 - total flux cleaned = 0.000103892 Jy ! Component: 4000 - total flux cleaned = 0.000123586 Jy ! Component: 4050 - total flux cleaned = 0.000156194 Jy ! Total flux subtracted in 4096 components = 0.000143192 Jy ! Clean residual min=-0.000356 max=0.000357 Jy/beam ! Clean residual mean=0.000001 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.149194 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 529 components and 0.149194 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0037+6236_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.975 x 1.577 at -41.24 degrees (North through East) ! Clean map min=-0.00081252 max=0.091922 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0037+6236_X_map.fits wmodel /vlbi/bp222/temp_maps//J0037+6236_X_map.mod ! Writing 529 model components to file: /vlbi/bp222/temp_maps//J0037+6236_X_map.mod wobs /vlbi/bp222/temp_maps//J0037+6236_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0037+6236_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0037+6236_X_map.win ! wwins: Wrote 11 windows to /vlbi/bp222/temp_maps//J0037+6236_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0919219 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000113506 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.370443 0.370443 0.740886 1.48177 2.96354 5.92709 11.8542 23.7084 47.4167 94.8334 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.091 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 809.841 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0037+6236_X_dfm.log closed on Thu Feb 14 22:23:02 2019